COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Feng Gao,Jinghuan Fu,Siyuan Song,Yuhang Yao,Zeyu Guo,Xingyu Wang,Fei Jin,Ying Wang,Gongxun Bai
Surface and interfacial regulation is critical for breathable wearable materials that require stable humidity-responsive electrical output together with auxiliary thermal functionality. Herein, we report a lysine-stabilized MXene/polyvinyl alcohol (PVA) electrospun nanofibrous membrane in which Ti₃C₂Tₓ MXene is incorporated into a porous and vapor-permeable fiber network. This design promotes interfacial compatibility between MXene and PVA, improves its dispersion within the polymer matrix, and preserves a breathable porous architecture that favors water-vapor transport and interfacial moisture uptake. The 2 mg/mL MXene-Lys/PVA exhibits a strong humidity-dependent electrical response, delivering a resistance response of 10,665 over 40–90% RH, and stable operation during repeated cycling and two months of storage. The sensing behavior is mainly associated with water-adsorption-mediated modulation of charge transport within the hydrated polymer/MXene interfacial network, while an additional low-frequency interfacial process emerges under high-humidity conditions. Beyond humidity sensing, the composite largely retains the vapor-transport capability of the porous PVA matrix and simultaneously provides effective photothermal conversion under light irradiation. A garment-mounted PET-ITO prototype further enables real-time wireless transmission of activity-associated humidity-responsive signals. These results show that L -lysine-assisted MXene integration in electrospun porous membranes provides a composition-tunable platform for humidity-responsive electrical readout and photothermal heating demonstrations. Download: Download high-res image (187KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2026
·
IF 9.9
Huan Qin,Fei Guo,Shiyu Xiao,Xiaobin Jiang,Xiaoming Yan,Gaohong He,Jianquan Luo,Xuehua Ruan
Coordination-induced reconstruction enables high-flux PU NF membranes. • Zr 4+ selectively disrupts hydrogen-bonding networks in PU layer. • Spatial reconstruction creates free volume while preserving selectivity. • 21% higher permeance with >95% rejection under acidic conditions. • Decouples permeability–stability trade-off via simple post-modification. Polyurea membranes exhibit exceptional acid-base tolerance due to their densely cross-linked structure and extensive hydrogen-bonding network, making them attractive for separations under extreme pH conditions. However, the tightly associated network also leads to limited free volume, resulting in low water permeability that hinders practical applications. Herein, we report a permeance-enhanced polyurea nanofiltration membrane fabricated via coordination-induced structural reconstruction. By introducing Zr 4+ into the polyurea network, coordination interactions with urea groups partially disrupt interchain hydrogen bonding, leading to network loosening and additional free volume. As a result, the water permeance is increased by 21% without compromising selectivity. Meanwhile, incorporation of Zr 4+ enhances membrane hydrophilicity and surface positive charge, which therefore improves antifouling properties and promotes the rejection of heavy metal ions. Importantly, the reconstructed membrane retains excellent acid resistance, maintaining a stable salt rejection above 95% over 720 h. This work provides a simple yet effective strategy to overcome the permeability-stability trade-off in polyurea membranes and offers new insights into coordination-mediated regulation of polymer network structures for high-performance separations under harsh conditions. Download: Download high-res image (175KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
ENERGY CONVERSION AND MANAGEMENT
·
2026
·
IF 11.8
Cuncun Qian,Jingping Zuo,Yu Zhang
Under high-rate discharge, lithium-ion batteries (LiBs) are prone to severe temperature rise and thermal runaway, necessitating effective thermal management. Conventional active thermal management strategies consume substantial energy to maintain constant system temperature. In this study, a passive temperature control method is proposed for LiBs under high-rate discharge conditions. Numerical simulations and experimental investigations were conducted to validate the effectiveness of this method in regulating battery module temperature. Under 3C discharge conditions, the proposed method reduced the maximum module temperature to 35.49 °C, achieving a 60.8 % decrease compared to the module without thermal management. The temperature difference within the module was only 2.69 °C. Furthermore, the thermal management performance of different carbon-based composite phase change materials (PCMs) for the battery system was investigated. Optimal thermal management performance was achieved using a composite PCM (c-PCM) with a phase change temperature of 33.54℃, thermal conductivity of 6.82 W·m −1 ·K −1 , and latent heat of 222.33 J/g. Finally, an Ei@8 %EG c-PCM was fabricated experimentally, and the effectiveness of its thermal management performance was verified. The proposed passive thermal management approach offers significant application value for microgrid energy storage systems based on renewable energy sources by reducing the parasitic energy consumption associated with active thermal management methods.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Chaomin Yin,Hao Yuan,Yun Zhang,Lan Gao,Liang Shi,Xinghua Zhu,Shihua Ding
ZnZr 1- x (Ga 1/2 Ta 1/2 ) x Ta 2 O 8 and ZnZr 1- y (Al 1/2 Nb 1/2 ) y Ta 2 O 8 were designed in this work. All components retained single monoclinic wolframite structure. (Al 1/2 Nb 1/2 ) 4+ doping decreased the sintering temperature from 1400 °C to 1350 °C with relative density reaching up to 97.53%. Based on Phillips-Van Vechten-Levine ( P - V - L ) chemical bond theory, the dependence of structure on properties was analyzed. Compared to ionic polarizability, bond ionicity dominated the ε r variations. Internal loss and external loss exhibited equivalent contributions to Q × ƒ enhancement, from 77,256 GHz at x = 0 to 92,814 GHz at x = 0.04 (95,368 GHz, at y = 0.06). Importantly, (Al 1/2 Nb 1/2 ) 4+ doping enabled the temperature coefficient | τ ƒ | to meet practical application standard. It was explained from the structural perspective, through calculating oxygen bond valence V O . Upon sintering at 1400 °C, the ZnZr 0.96 (Ga 1/2 Ta 1/2 ) 0.04 Ta 2 O 8 ceramic demonstrated ε r = 22.89, Q×f = 92,814 GHz, and τ f = −34.33 ppm/°C. Similarly, the ZnZr 0.94 (Al 1/2 Nb 1/2 ) 0.06 Ta 2 O 8 ceramic achieved ε r = 24.07, Q×f = 95,368 GHz, and τ f = −9.98 ppm/°C at 1350 °C.
✓ 已验证
DOI
高影响因子
ACTA PHYSICO-CHIMICA SINICA
·
2026
·
IF 13.5
Baogang Fu,Nan Su,Jianmin Luo,Yun Wang,Bo Hu,Liang Cheng,Hongjun Dong,Chunmei Li
SCN-AP with a D-π-A network was synthesized via sulfur doping and pyridine grafting. • SCN-AP achieves integrated design of 1 O 2 generation and kinetic matching of ORR/WOR. • SCN-AP boosts ·O 2 - / 1 O 2 generation, with a H 2 O 2 yield of 1030 μmol g -1 within 2 h. • Antibacterial assays verify the photoactivated antibacterial potential of SCN-AP. • In-situ XPS and DRIFTS characterize photogenerated electron flow and reaction intermediates. Photocatalytic H 2 O 2 synthesis is commonly dominated by the oxygen reduction reaction (ORR), whereas simultaneously enabling water oxidation reaction (WOR) and directional charge separation through band-structure regulation remains challenging. Herein, sulfur doping and pyridine modification were integrated to construct an intramolecular donor- π -acceptor (D- π -A) network within the carbon nitride framework. The resulting electronic polarization promotes directional separation of photogenerated charge carriers and optimizes the band structure to thermodynamically enable both ORR and WOR pathways. Consequently, the as-synthesized SCN-AP photocatalyst achieves an H 2 O 2 yield of 1030 μmol g -1 within 2 h in pure water, 3.73 times that of pristine PCN, and exhibits effective antibacterial activity against clinically relevant pathogens including Acinetobacter beijerinckii and Klebsiella variicola . The in-situ electron paramagnetic resonance (EPR) spectroscopy and in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) collectively support the coexistence of ORR and WOR pathways. The ORR serves as the predominant route and involves a ·O 2 - -mediated stepwise reduction pathway together with a 1 O 2 -associated pathway, while WOR provides a complementary hole-driven contribution to H 2 O 2 formation. This work demonstrates a feasible band-engineering strategy for constructing polymeric photocatalysts with directional charge transfer and dual-pathway H 2 O 2 photosynthesis. This work demonstrates a D-π-A-mediated electronic polarization strategy that directs charge migration in carbon nitride, enabling dual-pathway H 2 O 2 photosynthesis through coupled ORR and WOR processes. Download: Download high-res image (411KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Junchi Ma,Yiwen Zhang,Siyao Mao,Lanjie Xu,Jipeng Cao
Flexible wearable fabric-based strain sensors have attracted considerable attention for human motion monitoring and healthcare; however, their practical deployment remains severely limited by performance degradation in humid or wet environments and insufficient durability under cyclic mechanical loading. Herein, we presented a multifunctional wearable fabric (MWF) featuring a composite coating with hierarchical structure, that simultaneously delivered outstanding strain-sensing performance and robust superhydrophobicity via a facile dip-spray combined coating process. The synergistic effect of the inner MXene and outer fluorinated Fe 3 O 4 /MWCNTs (F-Fe 3 O 4 /MWCNTs), endowed the MWF with broad-range strain responsiveness (up to 200% strain) and outstanding waterproof functions originated from the superhydrophobic surface. Importantly, the copolymer used as continuous phase of the composite coating, substantially reinforcing interfacial bonding between the coating and the elastic fabric skeleton, resulting in remarkable long-term durability, maintaining stable electrical response over 3600 cyclic stretching/releasing tests (50% strain) while preserving waterproof functionality even under 100% tensile deformation. This work provided a new method to fabricate durable and high-performance flexible strain sensors with wide sensing range and environmental robustness, addressing the persistent challenge that has long hindered the translation of wearable electronic fabrics from laboratory prototypes to real-world applications. Download: Download high-res image (183KB) Download: Download full-size image Design and fabrication schematic illustration of MWF.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Kailin Han,Liangmiao Zhang,Changzheng Pan,Hao Zeng,Yibo Xue,Fang Xia
Theory-experiment closed loop enables rational design of doped NiO electrochromics. • DFT screening identifies Y as the optimal dopant over La and Ce. • Y-doped NiO exhibits 50.6 % optical modulation and fast switching kinetics. • High coloration efficiency of 215.6 cm 2 ·C⁻ 1 is achieved experimentally. • Y-doped smart windows achieve 11.3 °C cooling, proving energy savings. Doping is an effective strategy to tailor NiO for high‑performance eletrochromic applications. In this work, first‑principles calculations reveal negative formation energies for Y (−5.83 eV) and La (−3.72 eV) in NiO, confirming spontaneous and stable doping. Experimentally, Y and La doping dramatically boost the charge storage capacity of crystalline NiO films. Most notably, at 500 nm, the Y‑doped (Y‑4) and La‑doped (La‑4) films achieve outstanding optical modulations of 50.6 % and 32.0 %, respectively. They far exceed the 8.3 % of undoped NiO‑400. The doped films also exhibit much faster switching kinetics: coloration/bleaching time of 4.2/6.1 s for Y‑doped and 8.0/4.3 s for La‑doped, compared to 7.0/6.5 s for undoped NiO. More importantly, they exhibit remarkably high coloration efficiencies of 215.6 and 262.0 cm 2 ·C −1 , respectively. After 1000 cycles, the Y‑doped film retains 88.0 % of its initial charge capacity, and the La‑doped film retains 90.7 %. Model house tests indicate their good thermal insulation performance for building applications. This strategy of integrating computational design with experimental validation provides a powerful and general approach to develop tailored doped‑NiO electrochromic materials and other advanced functional materials. Y(or La)-doped NiO electrochromic materials with high electrochromic properties was designed by first‑principles calculations and synthesis successfully. Download: Download high-res image (97KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Shiyin Zhao,Songyang Jiang,Yuxuan Xia,Fang Wang,Yujiao Li,Zhuoliang Liu,Xin Min,Cheng-an Tao
First piezo-responsive MOF heterostructure for mechanical Cr(VI) reduction. • F-modified MOF and ZnO loading synergistically boost piezoelectric response. • Efficient piezo-catalytic interface enables ultrafast Cr(VI) reduction. • 10 ppm Cr(VI) completely reduced to undetectable level within only 15 s. Hexavalent chromium (Cr(VI)) is highly toxic and carcinogenic; its reduction to Cr(III) remains the most viable remediation strategy. Piezoelectric catalysis, which converts mechanical energy into chemical energy via built-in electric fields, offers a sustainable route for pollutant degradation. However, the application of piezoelectric Metal-Organic Frameworks (MOFs) in heavy metal reduction remains largely unexplored. Herein, we report a strategy of fluorination combine with ZnO loading to construct piezoelectric MOF heterostructures for ultrafast Cr(VI) reduction. The optimized ZnO/UiO-66-F 4 completely reduced 10 ppm Cr(VI) to below detection limits within merely 30 s under sonication, substantially outperforming pristines. Systematic characterizations and DFT calculations revealed that fluorination depresses the conduction band to −0.91 V vs. NHE, establishing a type-II staggered band alignment with ZnO that synergizes with the piezoelectric field to drive vectorial charge separation, as corroborated by markedly reduced charge-transfer resistance and prolonged fluorescence lifetime with enhanced quantum yield. Mechanistic investigations further identified the interfacial Zn Zr dual-atom site as the true catalytic center, exhibiting the strongest Cr(VI) adsorption affinity and the lowest activation energy barrier for the rate-determining step. The catalyst demonstrated exceptional durability, retaining 98.2% removal efficiency after five cycles with negligible metal leaching. This work pioneers the application of piezoelectric MOFs in heavy metal remediation and establishes a molecular-level electronic modulation strategy for mechanical-energy-driven water purification. Piezoelectric ZnO/UiO-66-F 4 heterostructure was constructed via fluorine modification coupled with ZnO loading, demonstrating superior piezocatalytic performance for Cr(VI) reduction under ultrasonic vibration. Download: Download high-res image (138KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2026
·
IF 13.2
Qiao Fan,Kai Zhang,Shigui Peng,Chong Chen,Tingting Luo,Yufei Liu,Min He,Yongji Gong,Lanlan Wei,Yucheng Yin,Jie Yu
To address the core challenge of balancing electrical conductivity, mechanical toughness, and biocompatibility in flexible bioelectronic electrodes, this study proposes a PAM molecular bridge directional coupling strategy. We in situ fabricated a CCNFs/PEDOT: PSS-co-PAM (PSM) composite hydrogel, with linear CMC as a control. Via multiscale characterization and molecular dynamics (MD) simulations, we clarified key structure-property links. PAM segments act as “molecular bridges,” conferring flexibility and biocompatibility, while their amide groups form high-density hydrogen bonds with CCNF's ordered carboxyl groups. This anchors the 3D rigid CCNF framework to PEDOT: PSS chains, thereby optimizing stress transfer and charge transport. In contrast, CMC's linear structure and ether-linked carboxyl groups yield weak interfacial interactions. MD simulations confirmed the CCPSM system has 1.6× more hydrogen bonds, 3.36× higher interaction energy, and 63.4% lower water diffusion vs. CMC. CCPSM-5 exhibits 2.16 S/m conductivity, 5.7× higher toughness (3.165 MJ·m −3 ), 1.2× higher elongation (746%), plus excellent adhesion, anti-swelling, and dynamic electrical stability on glass and dry/wet skin. As a bioelectrode, it outperforms commercial Ag/AgCl in EMG/ECG signal fidelity and RMS, enabling precise multi-joint motion monitoring. This work resolves the conductivity-mechanical trade-off by leveraging CCNF's 3D reinforcement and interfacial coupling, offering a novel design paradigm for high-performance flexible bioelectronics.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2026
·
IF 3.8
Liang Yang,Jianwei Dao,Zihao Han,Zhihao Jiang,Yajie Deng,Taiping Han
Traditional white light-emitting diodes (LEDs) frequently exhibit cyan-gap deficiency, resulting in unbalanced emission spectrum that impedes the realization of full-spectrum lighting. Herein, a novel Ce 3+ -doped garnet phosphor CaY 2 HfAl 4 O 12 (CYHAO:Ce 3+ ) was successfully synthesized via a high-temperature solid-state reaction method. The crystal structure, luminescent properties, thermal stability, and WLED application performance of the phosphor were systematically investigated. X-ray diffraction (XRD) and Rietveld refinement results confirm that CYHAO:Ce 3+ crystallizes in a cubic garnet structure with space group Ia-3d. Under 446 nm blue light excitation, CYHAO:Ce 3+ exhibits a broad cyan emission band centered at ∼505 nm, which perfectly fills the cyan-gap of traditional WLEDs. The optimal Ce 3+ doping concentration is determined to be 0.02 mol. Concentration quenching mainly resulted from radiation reabsorption and electric dipole-electric dipole interactions. This phosphor exhibited strong thermal stability, retaining ∼73% of initial emission intensity at 423 K with an activation energy of 0.31eV. A WLED device fabricated by combining it with commercial CaAlSiN 3 :Eu 2+ phosphors and a 450 nm blue chip emitted warm white light with an excellent color rendering index (Ra = 92.8, R9 = 93.9, R15 = 91.7) and a correlated color temperature of 3507 K. These results demonstrate that CYHAO:Ce 3+ is a promising cyan phosphor for high-quality full-spectrum WLEDs with excellent color rendering performance.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Yucan Zhu,Pingyong Hu,Hedong Jiang,Yongxiao Yang,Zhaodi Wang,Guoxiang Wang,Zhuoya Mao,Zhaohui Hou
Aqueous zinc-ion batteries (AZIBs) are considered promising candidates for next-generation energy storage technologies owing to their high safety, environmental friendliness, and low cost. However, their performance is hindered by inherent limitations in cathode materials, including low reversible capacity, sluggish Zn 2+ diffusion kinetics, structural instability during cycling, and inadequate intrinsic conductivity, which restrict their practical application. To mitigate these challenges, this study develops a high-performance flower-like composite electrode material, consisting of ammonium vanadate (NH 4 V 4 O 10 , NVO) modified with reduced graphene oxide (rGO), denoted as NVO@rGO. The incorporation of rGO not only provides a three-dimensional conductive network to enhance electron transport but also forms a stable strongly coupled interface with NVO. The interfacial coupling enlarges the interlayer spacing and redistributes interfacial charge, leading to enhanced Zn 2+ transport kinetics and improved charge-storage reversibility. The NVO@rGO electrode exhibits a specific capacity of 510 mAh g −1 at 0.2 A g −1 , and retains 368 mAh g −1 even at 5 A g −1 . This work provides novel insights into the design of high-performance vanadium-based cathodes for AZIBs.
✓ 已验证
产品关联
DOI
高影响因子
SOLAR ENERGY MATERIALS AND SOLAR CELLS
·
2026
·
IF 6.6
Zongze Lv,Lean Xian,Fanmu Meng,Jinqi Yang,Xiang Huang,Keyan Sun
Integrating carbon capture with solar energy storage offers a promising pathway toward carbon neutrality, yet the synergistic utilization of carbonaceous materials from capture processes remains underexplored. Herein, we fabricate a flexible phase change film (PCF) using porous carbon derived from the reciprocal carbon–carbonate co-calcination (RCCC) of bamboo biochar and limestone. During RCCC, 93.2% of CO 2 released from limestone is converted to CO. The optimized PCF composed of BC, thermoplastic polyurethane, and microencapsulated eicosane achieves a phase change enthalpy of 123.87 J g −1 , excellent leakage-proof and mechanical stability. The photothermal conversion efficiency can reach 85.5%. This work demonstrates the first integration of RCCC-based carbon capture with flexible photothermal energy storage, offering a viable route for upgrading captured carbon into functional solar-thermal materials.
✓ 已验证
产品关联
DOI
高影响因子