文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4537至4548个,产品总数347,550个

切换升序
ACS Sustainable Chemistry & Engineering · 2026 · IF 7.6

Rapid Condensation-Regulated Crystallization of Titanium Silicalite-1 with a High Content of Active Ti

Yu Jiaojiao,Zuo Yi,Li Gudan,Cai Jiajun,Chen Yu,Guo Yuzhou,Xu Shutao,Li Lina,Guo Lingling,Yang Hong,Guo Xinwen

Titanium silicalite-1 (TS-1) attracts wide attention as an effective oxidative catalyst. However, the preparation of TS-1 typically requires rigorous synthesis procedures with a relatively long synthesis time and generates a substantial amount of wastewater. This study discovers that, in the presence of tetrapropylammonium hydroxide (TPAOH), Si and Ti sources can form a homogenous liquid solution that is highly stable although the two typically undergo hydrolysis at very different rates individually. With such understanding, this work develops a straightforward one-pot synthesis strategy that eliminates the cumbersome procedures aimed at suppressing the hydrolysis of the Ti source in TS-1 synthesis and demonstrates that the crystallization process of TS-1 can be accelerated by reducing the molar ratio of water to Si species ( n (H 2 O/Si)) in the synthesis solution. In propene epoxidation with H 2 O 2 , an excellent catalytic activity is obtained over the TS-1 synthesized at n (H 2 O/Si) = 3.5 and crystallized for only 6 h. This low n (H 2 O/Si) synthesis regime results in a significantly high yield per batch (12 g TS-1/100 mL batch) and, at the same time, produces almost no wastewater. The superior catalytic performance of TS-3.5-6 synthesized is attributed to its high total Ti content and the presence of catalytically active Ti(OSi) 2 (OH) 4 .

CAS / MDL: 13463-67-7 4499-86-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 · IF 19.9

Dynamic Fluidic Compensation on Interflow Slippery Surfaces Enables Durable Anti-Fouling and Suppresses Ice-Solid Interlocking

Liming Liu,Wei Pan,Junjie Huang,Junru Li,Haijiang Kou,Yanli Wang

Conventional liquid-infused surfaces suffer from rapid lubricant depletion and lack thermodynamic stability in complex aquatic environments or subzero climates. Herein, a bio-inspired interflow self-sufficient slippery surface (slippery-ISSS) is proposed. Fabricated via scalable picosecond laser processing, this surface features an interconnected capillary network that provides dynamic fluidic compensation to autonomously restore the liquid-shielding interface upon mechanical disruption. By integrating targeted capsaicin doping, the system achieves a synergistic physical-chemical defense, demonstrating durable anti-fouling performance with negligible biological accumulation after 90-day outdoor immersion in natural lotus pond sludge. To address the freezing challenges, an interfacial heat transfer model is constructed to elucidate the delayed phase-change process, while the structural capillary network dynamically redistributes the lubricant to accommodate ice volume expansion, effectively suppressing ice-solid interlocking. This anti-interlocking mechanism, combined with localized heat flux manipulation, enables spontaneous dewetting and gravity-driven ice detachment at -15°C under solar irradiation (0.03 W cm −2 ). Furthermore, the surface maintains an ice adhesion of ∼22 kPa over 50 consecutive cycles. Supported by the interfacial adhesion dynamics and thermodynamic models, this work provides a quantifiable strategy for designing robust, multiphase-resistant functional materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nanomaterials · 2026 ·Vol. 16 ·期 16 ·1015 · IF 4.8

Construction of Hierarchical Rod-Assembled Ce–Al–La–MOFs@PPy Composites for Highly Efficient Fluoride Removal from Water

Xin Lin,Jiayi Tu,Jinyun Zhao,Fangfang Wu,Xingping Fu,Hao Lin,Jiapeng Hu

In this study, a hierarchical rod-assembled, polypyrrole-modified Ce–Al–La trimetallic metal–organic framework (Ce–Al–La–MOFs@PPy) composite was successfully synthesized through a solvothermal method combined with in situ polymerization for efficient fluoride removal from aqueous solutions. The incorporation of conductive polypyrrole (PPy) into the multimetallic MOFs effectively enhanced the structural stability, surface properties, and adsorption performance of the material. Adsorption experiments demonstrated that the optimal metal-to-ligand molar ratio was 3:1, and the prepared adsorbent exhibited excellent fluoride removal performance under weakly acidic conditions (pH = 5). The maximum adsorption capacity calculated from the Langmuir model reached 216.92 mg·g−1at 45 °C. Adsorption kinetics were well fitted by the pseudo-second-order model, indicating that the adsorption process was mainly governed by chemisorption. Mechanism investigations based on FTIR and XPS analyses demonstrated that fluoride removal mainly occurred through electrostatic attraction and coordination exchange between fluoride ions and the Ce/La active sites. In addition, the composite exhibited good selectivity, anti-interference ability toward coexisting ions, and satisfactory fluoride removal performance in practical industrial wastewater. These findings suggest that Ce–Al–La–MOFs@PPy is a promising adsorbent for efficient fluoride-contaminated wastewater treatment.

CAS / MDL: 109-97-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 · IF 19.9

Breaking the Porosity-Property Trade-Off in Piezoceramics Via Self-Assembled Pore Engineering

Yangyang Zhou,Xinge Sun,Zhi Tan,Zhiyong Zhou

The practical applications of porous piezoelectric ceramics have long been constrained by the intrinsic trade-off between porosity and their piezoelectric and mechanical properties. Existing pore-forming techniques, such as burnt-out polymer spheres, still fail to achieve synergistic optimization of these properties. Here, we propose a self-assembled pore engineering (SAP), which utilizes the density difference between reactants and products during chemical reactions to enable spontaneous pore formation. Benefiting from the synergy of SAP-induced lattice softening, domain refinement, and significant residual stress, the fabricated porous bismuth layer-structured Ca 0.94 Bi 4.06 Ti 4 O 15 (Bi-CBT) ceramics with 30% porosity exhibit excellent comprehensive performance. The piezoelectric coefficient d 33 reaches 23.1 pC/N and shows a variation within ±15% over a broad temperature range of 25°C–525°C, while simultaneously possessing excellent compressive strength (558 MPa at 25°C, 276 MPa at 600°C) and low thermal conductivity (0.57 W m−1 K−1 at 25°C). More importantly, this method demonstrates broad universality across different material systems. Porous perovskite-structured BaTiO 3 prepared via SAP achieves an ultrahigh effective electrostrictive coefficient Q eff of 0.32 m 4 /C 2 . These findings establish a versatile, low-cost route for the scalable production of structural-functional integrated ceramics.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Vertically aligned bilayer PTFE-based self-floating aerogels: monolithic salt-resistant evaporators enabled by coupled thermal and mass transport optimization

Jiawei Huangfu,Yuxin Zhang,Sisi Chen,Zihang Xu,Bin Rong,Kaikai Chen,Qinglin Huang

Monolithic bilayer PTFE-based aerogels with vertically aligned channels were fabricated. • PDA deposition regulated water transport for optimized evaporation and salt resistance. • Vertically aligned channels facilitated capillary water transport and Marangoni-driven salt back-diffusion. • The evaporator achieved an evaporation rate of 2.41 kg m -2 h -1 and over 95% retention. Solar-driven interfacial evaporation has emerged as a promising strategy for alleviating the global freshwater crisis. However, its practical application is hindered by the degradation of evaporation performance owing to salt accumulation and material aging. In this study, a bilayer polytetrafluoroethylene (PTFE)-based aerogel with vertically aligned microchannels is fabricated. Carbon nanotubes are encapsulated in the upper layer for efficient photothermal conversion, and polydopamine is controllably deposited on the PTFE skeleton to impart a hydrophilic functionality and regulate the water supply. Under one sun illumination, the evaporator achieves a high evaporation rate of 2.41 kg m −2  h −1 while self-floating in 3.5 wt% brine. Notably, the increased air–liquid interface in the channels promotes Marangoni convection, which synergistically promotes diffusion to actively recycle salt ions back to bulk water, thereby ensuring a salt-free evaporation interface for 15 days of continuous outdoor operation. Additionally, the evaporator demonstrates exceptional durability, retaining over 95% of its initial evaporation rate during a 14-day accelerated aging test. This study offers a simple and scalable design option for solar evaporators that combine long-term stability with excellent efficiency.

CAS / MDL: 1185-53-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Foods · 2026 ·Vol. 15 ·期 16 ·2876 · IF 6

Blend-Brewing Optimization of Ganoderma lucidum Yellow Tea: Improving Palatability by Regulating Compound Release and Nanoparticle Assembly

Anran Yan,Weiyi Kong,Xinyu Feng,Ning Tang,Fangyuan Fan,Ping Chen,Binggan Lou,Qiang Chu,Ruili Zhang

Flavored teas have gained popularity because they combine sensory appeal with potential health benefits.Ganoderma lucidum(GL) is a promising functional beverage ingredient owing to its high medicinal value. However, its strong fungal off-flavor and bland taste limit consumer acceptance. Yellow tea (YT), characterized by a mild-sweet aroma and mellow mouthfeel developed during sealed yellowing, provides a suitable matrix for moderating the sensory defects of GL. This study designed a blend-brewing strategy, optimizing the YT to GL ratio (2:3,w/w) and comparing covered (CB), standard (SB), and open-topped brewing (OB) methods. SB achieved the most balanced sensory profile. In contrast, CB intensified bitterness and astringency, which were associated with higher concentrations of EGCG, gallic acid, and theobromine, whereas OB produced a relatively flat taste because of insufficient extraction. Brewing also reshaped self-assembled nanoparticles, with CB inducing pronounced aggregation and SB yielding a broader size distribution, smoother surfaces, and more balanced colloidal proteins, catechins, and caffeine. Removing nanoparticles substantially decreased infusion mellowness, supporting a contribution of the NP-enriched fraction to mouthfeel. These findings demonstrate thatGanoderma lucidumyellow tea (GY) blending and brewing method modulate sensory quality through chemical extraction and colloidal nanoparticle organization, providing a practical strategy to improveGanoderma lucidumpalatability and develop functional tea beverages.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
High Voltage · 2026 · IF 5.7

Thermal Stability of Plasma-Assisted Film Deposition for Insulation Modification: In View of Hydrophobicity and Flashover Performances

Xi Zhu,Liyan Wang,Xiuhan Guan,Tianhe Lu,Zhangliang Shen,Jiarui Bao,Hongtu Cheng,Zhi Fang

Polymer insulation exposed to natural environment inevitably face challenges from material ageing and surface insulating degradation. Surface treatment is an effective method to improve material performance, but traditional processing methods such as room temperature vulcanised silicone rubber (RTV) coating, are subjected to coating degradation after long time operation. Herein, we fabricated a stable cross-linked Si-containing (–SiO 4 ) film on polymethyl methacrylate (PMMA) insulation via eco-friendly atmospheric pressure plasma techniques, and verified its thermal stability performance. By addition of hexamethyldisiloxane (HMDSO) and fluorescent agent in plasma, fragmenting–crosslinking of HMDSO as well as surface functionalising by plasma-enabled reactions lead to the fabrication of fluorescent Si-containing film. Accelerating ageing test demonstrates that the plasma-modified PMMA remains steady hydrophobic performance after ageing. Although the surface insulating performance decreases with the ageing, the aged material still remains the higher flashover voltage compared with the original. It reveals that the Si-containing film could convert thermal oxygen reactions into itself crosslinking process with the shift of –SiO 2 to –SiO 4 groups, which eventually leads to the variation of material surface performance. Overall, the plasma-assisted Si-containing film for surface modification has satisfactory thermal stability, which offers a new avenue for insulation enhancement and service life prolonging.

CAS / MDL: 107-46-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Stage-resolved fuel-N conversion and char-tar evolution during microwave and conventional pyrolysis of N-rich sewage sludge

Jiangtao Meng,Tao Wang,Lei Ren,Jing Wang,Yuanyuan Zhang,Jingkuan Li,Fei Wang

Stage-matched framework reveals fuel-N pathway shifts. • Microwave shifts NH 3 and HCN release to lower temperature regions. • Microwave enriches amines and nitrile precursors in tar at lower temperatures. • Microwave promotes early char deoxygenation and condensation. • Polar O/N activation couples char-N reconstruction with tar-N evolution. Microwave-assisted pyrolysis shows promise for the clean conversion of N-rich biomass, yet its mechanism for regulating nitrogen migration remains unclear. Deashed sewage sludge and protein-derived amino acid models were employed to contrast microwave and conventional pyrolysis. This comparison utilized a reaction-stage-referenced framework based on the characteristic release regions of N-containing gases. Microwave heating did not change the basic nitrogen release pattern, with NH 3 as the dominant product and HCN as the secondary product, but substantially altered the temperature-dependent progression of the fuel-N conversion pathway. Under the present microwave experimental configuration, substantial fuel-N conversion was observed within the measured 190–300 °C range, occurring at lower measured temperatures than under conventional pyrolysis and accompanied by marked changes in O/N-containing structures. Amine intermediates were enriched in tar, and the tar-N fraction increased from about 44% to 87%, driving NH 3 release to lower temperatures. At 300–500 °C, these intermediates further underwent dehydrogenation, cyclization, and nitrilation under microwave effects, forming nitriles and low-carbon mono‑nitrogen compounds and enhancing HCN release around 300 °C. As a result, the characteristic NH 3 and HCN release regions were recorded at lower measured temperatures in the microwave system than in the conventional system. Meanwhile, microwave heating promoted early char deoxygenation and condensation, as reflected by protein-N conversion to pyrrolic-N, pyridinic-N, and nitrile-N, removal of C O and O-C=O groups, reduced interlayer spacing, and enhanced microcrystalline stacking. Tar evolved from heterocyclic and long-chain N-containing compounds toward light aromatics, oxygenated species, and low-carbon nitriles. A three-phase network is proposed wherein tar acts as an intermediate pool connecting char-N reconstruction with NH 3 /HCN release. This study provides mechanistic insights into fuel-N migration during microwave and conventional pyrolysis of N-rich sewage sludge. Download: Download high-res image (180KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 ·Vol. 18 ·期 33 ·45516-45525 · IF 7.8

Nanofiber Core-Spun Yarn with a Bioinspired Neuron-like Conductive Network for High-Sensitivity Wearable Sensing

Jia Chennuowa,He Yifan,Zhang Yong,Liu Sai,Zhang Meng,Tang Ning

Wearable e-textiles require yarn-level sensors that are simultaneously conductive, deformable, durable, and weavable. Many existing yarns that depended on multicoating or high filler loading often suffer from compromised flexibility and signal stability under repeated deformation. Herein, inspired by neurons, we develop a nanofiber core-spun yarn (PCP-NHY) featuring a bioinspired neuron-like conductive network through a stepwise interfacial engineering process, including electrospinning of PAN nanofibers, ultrasonic impregnation of CNTs, and in situ polymerization of pyrrole. In this conductive network, the granular PPy distributed on the PAN nanofiber network acts as neuronal somas, interconnected by CNTs that serve as axons, thus enabling efficient charge transport at low filler content while preserving mechanical flexibility. After helical wrapping onto a spandex core, the resulting elastic sensing yarn demonstrates high-performance strain-sensing capabilities, characterized by a high gauge factor of 5.73, a rapid response time (∼70 ms), and stable outputs over 5000 cycles at 40% strain. It supports real-time detection of both subtle and large-scale human motions, including facial microexpressions, Morse-code inputs, and multijoint movements. Meanwhile, two-dimensional textiles incorporating PCP-NHY yarns also exhibit outstanding sensing performance. This neuron-inspired material-structure design may provide an effective strategy to convert conventional yarns into robust, intelligent textile systems for advanced wearable sensing.

CAS / MDL: 10025-77-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES B-BIOINTERFACES · 2026 · IF 5.9

Skin friendly anti-photoaging semiconductor-nanozymes with dual enzyme activities

Baozhu Wang,Huixin Hou,Xindi Yang,Ting Pan,Yuan Zhou,Qi Xu,Kaiyan Li,Kemei Pei,Miao Su,Zhijun Zhang

A core-shell TiO₂@SiO₂@CeO₂ (TSC) nanozyme was designed to mitigate UV-induced skin photoaging. • TSC exhibits enhanced UV absorption and superior broad-spectrum UVA/UVB shielding performance. • CeO₂ shell endows TSC with SOD-like and catalase-like activities, enabling catalytic ROS scavenging. • TSC effectively reduces intracellular ROS levels and protects HaCaT cells from UVA-induced phototoxicity. • In vivo mouse model confirms TSC's excellent anti-photoaging efficacy. Skin photoaging, predominantly induced by UV light exposure, is a significant external factor to the aging process of the skin. Current anti-photoaging strategies primarily utilize semiconductor materials (e.g. TiO 2 , ZnO) as UV light absorbers. However, these materials also generate reactive oxygen species (ROS) during UV absorption, potentially causing oxidative damage to skin cells. The development of UV absorption semiconductors with limited ROS generation is highly desired. Herein, inspired by the enzyme-mediated ROS clearance in living organisms, we propose to employ antioxidant nanozyme to build skin friendly anti-photoaging semiconductor nanostructures. As a proof of concept, CeO 2 nanozymes with dual enzyme activities were coated on the surface of TiO 2 semiconductor to build semiconductor-nanozyme core-shell nanostructures. The obtained TiO₂@SiO₂@CeO₂ (TSC) core-shell nanostructures exhibited enhanced UV light absorption capacity. They also possess significant SOD- and Catalase- like activity with the value of 5.63 U/mg and 5.11 U/mg respectively, and some of the catalytic kinetic parameters comparable to those of natural enzymes. The catalytic mechanisms were deciphered by the density functional theory (DFT) calculation, revealing that the (111) and (220) crystal planes contribute most to the enzyme-like activity of CeO 2 . Besides, TSC could significantly reduce the UV light triggered intracellular ROS generation, and increased cell activity by 46% compared with the TiO 2 group. Moreover, TSC exhibited excellent anti-photoaging efficacy in mouse skin irradiation models. This study presents a safe and highly efficient nanostructure for skin anti-photoaging and offers a nanozyme-based solution to address the ROS-related side effects of semiconductor materials in biomedical applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Science and Engineering B-Advanced Functional Solid-State Materials · 2026 · IF 5.7

Enhancing the structural and interfacial durability of Ni-rich cathodes under extended operating conditions via Mg/Zr/Nb tri-doping

Adila Abulimiti,Yudong Zhang,Yiyuan Hua,Yanjun Miu,Tong Zhou,Xuejing Zhang,Can Cui,Weiji Dai,Cuijiao Zhao,Saifang Huang

Mg/Zr/Nb tri-doping jointly stabilizes Ni-rich layered cathodes under harsh operating conditions. • Tri-doping reduces Li + /Ni 2+ mixing and stabilizes the transition-metal layer and oxygen framework. • MZN-NCM delivers excellent cycling stability at room temperature, high temperature, and high cutoff voltage. • Mg/Zr/Nb co-doping improves charge transfer and Li + diffusion, enhancing the durability of Ni-rich cathodes. Ni-rich layered cathode materials (LiNi x M 1-x O 2 , x ≥ 0.8) offer high capacity and high energy density, but their cycling stability severely suffers from Li + /Ni 2+ cation mixing, H2-H3 phase-transition strain, interfacial side reactions, and sluggish Li + transport, especially under harsh conditions such as elevated temperature and high cutoff voltage. In this work, a Mg/Zr/Nb tri-doping strategy is proposed to construct Li(Ni 0.9 Co 0.05 Mn 0.05 ) 0.97 Zr 0.01 Mg 0.01 Nb 0.01 O 2 (MZN-NCM) cathode for synergistic stabilization under different operating conditions. The results show that Mg/Zr/Nb co-doping regulates the Ni valence distribution, reduces Li + /Ni 2+ cation mixing, enhances the stability of the transition-metal layer and oxygen framework, and suppresses interfacial side reactions and CEI degradation during cycling. MZN-NCM retains 90.1% of its capacity after 100 cycles at 25 °C and 89.8% at 60 °C, compared with only 59.8% and 41.7% for Pristine-NCM, respectively. Under a high cutoff voltage of 4.5 V, MZN-NCM also maintains a higher capacity retention of 87.7% after 100 cycles. Moreover, kinetic and interfacial chemical analyses indicate that multielement doping improves both charge-transfer behavior and Li + diffusion, enabling a synergistic enhancement of structural stability, interfacial stability, and ion transport. This work demonstrates that Mg/Zr/Nb synergistic doping is an effective material-design strategy for extending the applicable operating conditions of Ni-rich cathodes.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD RESEARCH INTERNATIONAL · 2026 · IF 8.8

HP-β-CD-functionalized hydrogel SERS fingerprinting for rapid storage-year discrimination of white tea

Zhenglong Chen,Zhile Zhao,Yuxin Bu,Xinyan Yang,Yulin Fang,Hui Lin,Yudong Lu

An HP-β-CD-functionalized hydrogel SERS strategy was developed for white tea storage-year analysis. • HP-β-CD-assisted capture and Ag-hotspot SERS sensing of tea polyphenols were mechanistically discussed. • Agarose improved nanoparticle dispersion and signal uniformity. • Sample-level machine learning enabled internal storage-year discrimination of the tested white tea samples. • External validation using multi-origin samples is still required to confirm practical robustness. Accurate discrimination of white tea storage years is important for quality evaluation, authenticity control, and market regulation. In this study, an HP-β-CD-functionalized hydrogel surface-enhanced Raman scattering (SERS) substrate was developed for rapid storage-year discrimination of white tea. Hydroxypropyl-β-cyclodextrin-functionalized silver nanoparticles (HP-β-CD/Ag NPs) were incorporated into an agarose hydrogel to construct an HP-β-CD/Ag NPs/AG substrate. HP-β-CD was designed to promote the local capture of aromatic and polyphenolic tea components near SERS-active Ag hotspots, while the agarose hydrogel improved nanoparticle dispersion and signal uniformity. The optimized substrate retained distinguishable SERS responses for epigallocatechin gallate and quercetin at 10 −7  mol L −1 and showed good signal uniformity, with a relative standard deviation of 6.96%. White tea samples from seven storage years between 2011 and 2023 were analyzed, including 10 independent samples per year and 10 spectra per sample. Principal component analysis showed that the first three principal components explained 98.94% of the spectral variance. Under 50 repeated tea-sample-level splits, machine-learning models achieved stable internal storage-year discrimination, with sample-level accuracies ranging from 97.62% to 100.00%. A sample-level permutation test further indicated that the classification performance was unlikely to result from random label association. These results suggest that the proposed hydrogel SERS strategy can provide a rapid and fingerprint-based approach for white tea storage-year discrimination, although further external validation using more diverse samples is still required. Download: Download high-res image (179KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。