ACS Applied Materials & Interfaces
·
2026
·Vol. 18
·期 33
·45278-45293
·
IF 7.8
Wang Jikui,Yang Rongzhe,Luan Shaoyu,Su Lexuan,Wang Yican,Guo Weihong
Solar interfacial evaporation is a promising approach for desalination and wastewater treatment, yet practical evaporators remain challenged by limited water transport, interfacial heat loss, and salt deposition in high-salinity brines. Herein, a self-floating, salt-resistant composite hydrogel foam evaporator, PTF@PGAS-Foam, was developed by integrating an electrospun tannic acid–Fe 3+ photothermal membrane with a polyelectrolyte double-network hydrogel foam. The upper photothermal membrane enables strong solar absorption and thermal localization, while the lower foam layer provides buoyancy, low thermal conductivity, and continuous three-dimensional water-transport pathways. Fixed sulfonate groups in the hydrogel induce the Donnan effect, suppressing salt-ion migration toward the evaporation interface and alleviating salt crystallization during continuous evaporation. Under 1 sun irradiation, PTF@PGAS-Foam achieved an evaporation rate of 2.61 kg·m –2 ·h –1 and an efficiency of 92% in a 20 wt % NaCl solution, with stable performance during continuous and cyclic tests. The evaporator also adsorbed heavy metal ions, including Pb 2+ and Cd 2+ , and cationic dyes. In outdoor scaled-up tests, a 15 cm diameter evaporator produced 20.35 kg·m –2 of water per day. This multifunctional evaporator integrates solar absorption, heat localization, self-floating behavior, salt resistance, and adsorption, showing potential for solar desalination and wastewater purification.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Electronic Materials
·
2026
·Vol. 8
·期 16
·7168-7178
·
IF 4.7
Xu Zhiyi,Xu Zhiheng,Chen Yong,Xu Tiancheng,Zhang Xuebin,Dong Zongyan,Tang Xiaobin
Incorporation of high-Z elements into conventional organic fluorophores generally induces severe fluorescence quenching owing to the classic heavy-atom effect. Nevertheless, recent advances in aggregation-induced emission (AIE) systems with through-bond/through-space conjugation (TBSC) have uncovered an anomalous heavy-atom-promoted fluorescence enhancement, which remains confined to covalently substituted organic small molecules with nonmetallic heavy atoms. Herein, we extend this unique principle to periodic metal-organic frameworks (MOFs) with coordination-bonded heavy metal nodes. By adopting an isostructural design strategy, two MOFs (Zr-TCPE and Hf-TCPE) are fabricated using a TBSC-type AIE ligand (H 4 TCPE). Remarkably, both MOFs exhibit hot-exciton thermally activated delayed fluorescence (TADF) features. Under X-ray excitation, Hf-TCPE exhibits substantially enhanced radioluminescence relative to Zr-TCPE, achieving an ultra-low detection limit of 2.53 μGy s –1 . Mechanistic investigations confirm that the higher atomic number of Hf enhances X-ray absorption, while the inherent TBSC and hot-exciton TADF properties enable efficient high-energy reverse intersystem crossing from high-lying triplet states to singlet states, effectively suppressing non-radiative T 1 decay. This synergistic mechanism fundamentally reverses the conventional heavy-atom quenching effect into a highly radioluminescence enhancement strategy. As a proof-of-concept, the Hf-TCPE-based radioluminescent nuclear battery delivers a maximum output power of 1.15 μW at a dose rate of 5.6 μGy s –1 , which is 17.8% higher than that of the Zr-TCPE counterpart, verifying its promising potential in radiation energy conversion. This work extends the heavy-atom-enhanced luminescence principle to periodic MOF systems, providing a universal strategy for the rational design of high-performance scintillators and radiation energy conversion materials.
✓ 已验证
产品关联
DOI
高影响因子
Journal of the American Chemical Society
·
2026
·
IF 16.6
Zhou Xichen,Wen Songwei,Hu Xiantao,Ng Wai-Pan,Liang Peng,Wang Shixin,Liu Fei,Zheng Jiajie,Zhou Jingwen,Wu Yan,Sun Yilin,Liu Tianyu,Yang Luyao,Wang Mingyue,Deng Zhikang,Fu Shuting,Zhang Huaqing,Dong Dechen,Wang Zuochao,Li Yuanzhuo,Lu Zigang,Liu Haoran,Liu Junzhi,He Jian,Dai Hongjie
Rechargeable Al-organic batteries using an Al metal anode
and organic
cathode are promising next-generation energy storage devices with
high safety, but with limitations such as large polarization, sloping
charge–discharge curves with low voltages, and fast capacity
decay. Here, we demonstrate high-performance Al-organic batteries
based on amorphous electro-oligomers derived from a new molecule,
1,4-bis(3,7-di(9H-carbazol-9-yl)-10H-phenothiazin-10-yl)benzene (named
“MILES-1”). MILES-1 underwent in situ electro-oligomerization
into redox-active oligomers with distinct electronic structures on
conductive carbon during battery cycling via terminal carbazole groups.
In our low-cost and nonflammable ternary ionic liquid electrolyte,
MILES-1 electro-oligomers, consisting of approximately seven monomers
with phenothiazine motifs, enabled well-defined charge–discharge
curves and an unprecedentedly high discharge voltage of up to 2.04
V. With a high N and S atoms-to-aryl ratio of 4:5 in the phenylene
bis(phenothiazine) motif, the Al/MILES-1 battery delivered a high
capacity of 137 mAh g –1 with a CE of 99.3% at 200
mA g –1 . Al/MILES-1 batteries presented low self-discharge,
excellent rate performance, and cyclability, and they can operate
over a wide temperature range from −20 to 60 ° C. Our large
Al/MILES-1 pouch cell, with a high mass loading of 25.8 mg cm –2 delivered a reversible capacity of 0.8 Ah and an
areal capacity of 2.5 mAh cm –2 . The combined low
cost, high safety, high mass loading, wide temperature range, improved
energy density, and superior cyclability highlight the potential of
Al-organic batteries as future energy-storage systems.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Qiwei Li,Fengxiang Yin,Yunyi Zhou,Rong Ge,Ting He
The electrochemical ammonia oxidation reaction (AOR) is an emerging, eco-friendly technology for ammonia conversion and energy utilization, offering a promising solution to ammonia pollution and energy issues. This work synthesizes Ni–Cu–BTC bimetallic MOF catalysts with varying Ni/Cu ratios via a hydrothermal method and characterizes them using XRD, FT-IR, TEM, XPS and BET. Electrochemical tests and UV-vis spectroscopy reveal that Ni–Cu–BTC catalysts outperform monometallic Ni–BTC and Cu–BTC in AOR activity. Among them, Ni1Cu2–BTC exhibited the highest geometric current density, delivering a current density of 110.82 mA cm −2 at 0.79 V vs. Ag/AgCl with an onset potential of 0.41 V (vs. Ag/AgCl) at 5 mA cm −2 . The enhanced AOR performance is associated with the optimized Ni/Cu composition and favorable structural and electrochemical properties. At pH 10, an applied potential of 0.65 V (vs. Ag/AgCl), and an initial NH 4 + -N concentration of 500 mg L −1 , Ni1Cu2–BTC achieves 71.34% ammonia-nitrogen removal and 82.32% apparent N 2 selectivity within 5 h.
✓ 已验证
产品关联
DOI
高影响因子
REACTIVE & FUNCTIONAL POLYMERS
·
2026
·
IF 5.4
Ruiqi Song,Zhengtao Wu,Youchao Zhang,Zikang Zheng,Tianhao Chen,Haitao Wu,Xinxin Sang,Yan Yuan
Developed stepwise modification strategy for UV-curable gelatin-based conductive hydrogels. • Optimized water/glycerol solvent system to achieve outstanding long-term moisture retention. • Constructed hybrid ionic-electronic networks via carboxylated CNT reinforcement. • Demonstrated stable wide-range strain sensing for wearable human motion monitoring. Conductive hydrogels serve as core matrix materials for flexible strain sensors, but conventional hydrogels suffer from rapid water loss under ambient conditions and an inherent trade-off between mechanical and conductive properties. This work develops a gelatin/poly(acrylic acid) composite conductive hydrogel synergistically functionalized with glycerol for moisture retention, aluminum salts for ionic crosslinking, and carboxylated multi-walled carbon nanotubes (c-MWCNTs) for reinforcement. Moisture retention is optimized by tuning the water-to-glycerol ratio, and three aluminum salts are compared to identify the optimal crosslinker. Multi-dimensional characterizations reveal interfacial interactions and microstructural evolution, and the regulatory effect of c-MWCNTs loading on electromechanical and sensing properties is systematically investigated. At a water-to-glycerol ratio of 50:50, the hydrogel retains over 82% water after 7 days of ambient storage. The aluminum chloride system exhibits the optimal ionic conductivity and balanced mechanical performance. With 0.025 wt% c-MWCNTs uniformly embedded via hydrogen bonding and coordination interactions, both conductivity and tensile toughness are significantly enhanced. The resulting flexible strain sensor features stable sensitivity over a wide strain range and excellent fatigue resistance, enabling accurate monitoring of human joint motions and showing great potential for wearable health monitoring. Download: Download high-res image (220KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Advanced Photonics Nexus
·
2026
·
IF 6.3
Jiale Chen,Yuxiao Xiong,Ye Lu,Weisheng Zhang,Kunjue Shang,Zhenzhen Li,Mingsi Lai,Haolin Chen,Zhouyi Guo,Bo Xu,Zhiming Liu
Tumor-associated macrophages, the largest population of immune cells in the tumor microenvironment (TME), dominate the complexity of TME due to their highly phenotypic plasticity, leading to personalized tumor progression, differentiated drug response, and tolerance. However, current methods for the interpretation of cellular heterogeneity involve destructive, cumbersome, and high-cost sample pretreatment procedures. Herein, we present surface-enhanced Raman scattering cytomics (SERS-Cytomics) as a non-destructive and low-cost approach for macrophage phenotyping and metabolic profiling. SERS-Cytomics is capable of providing the whole molecular fingerprints of living cells at a single-cell level. A deep-learning model enables accurate classification of three phenotypes of macrophages exceeding 95%. Further, the Shapley additive explanations analysis is adopted to screen the differential metabolic signals, where two metabolic biomarkers at 1071 (glucose) and 1440 (cholesterol) cm−1 display the maximum weight in the classification of M1 and M2 macrophages, respectively. Correlation explanation of SERS-Cytomics and transcriptomics reveals the involvement of the glycolytic pathway and lipid metabolism in M1 and M2 macrophages, respectively. Therefore, SERS-Cytomics enables an efficient and non-destructive analytical tool for cellular heterogeneity explanation at a single living cell level.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2026
·
IF 8.3
Dandan Chen,Yang Ding,Zhihui Feng,Lei Hu,Yupeng Tian,Jiahan Cheng,Xiaohe Tian
Methylglyoxal (MGO), a reactive dicarbonyl metabolite generated during glycolysis, has been implicated in oxidative stress and neuroinflammation associated with Alzheimer’s disease (AD), but its spatial relationship with amyloid-β (Aβ) pathology in brain tissue remains incompletely characterized. Here, we report two cyclometalated iridium(III) complexes, Ir-MA and Ir-DA, for reaction-based phosphorescent sensing of MGO. Ir-DA contains an ortho-diamino recognition unit that reacts with MGO to form the quinoxaline product Ir-DA-Qx, producing a pronounced phosphorescence turn-on response consistent with attenuation of photoinduced electron-transfer-mediated quenching. Compared with the mono-amino analogue Ir-MA, Ir-DA exhibited a preferential response toward MGO over structurally related dicarbonyl species under the tested conditions, with a regression-derived detection limit of 0.32 μM and nonlinear optical properties suitable for multiphoton imaging. Ir-DA enabled imaging of exogenous and endogenous MGO-related changes in living cells and revealed increased phosphorescence signals under inflammatory and amyloidogenic stress. In APP/PS1 mouse brain sections, Ir-DA-associated signals were elevated at 6 months relative to wild-type controls and further increased at 12 months, with quantitative colocalization analysis demonstrating a close spatial association with Aβ-positive plaque core and peri-plaque regions. Collectively, these results establish Ir-DA as a reaction-based phosphorescent platform for imaging MGO-associated carbonyl stress and provide quantitative imaging evidence linking MGO dysregulation with amyloid pathology.
✓ 已验证
产品关联
DOI
高影响因子
Photonics
·
2026
·Vol. 13
·期 8
·767
·
IF 2.1
Donglin Wang,Tianhao Feng,Ziyan Li,Xuezhen Zhai,Dewei Liu,Jimin Shang,Lamei Zhang
The increasing demand for broadband and self-powered optoelectronic devices has stimulated the development of two-dimensional (2D) material-based photodetectors. Here, we construct a self-powered photodetector based on a MoSe2/SnS2van der Waals (vdW) heterostructure. The unique combination of MoSe2and SnS2provides complementary light absorption and a type-II band alignment, which generates an interfacial built-in electric field to facilitate photogenerated carrier separation and transport, enabling efficient self-powered operation without external bias. The device exhibits a broad spectral photoresponse from ultraviolet (UV) to infrared (IR) wavelengths (350–1050 nm). Under zero bias, the photodetector achieves a responsivity of 0.6 mA/W and a rapid response time of 5.8/6.1 ms (rise/fall) under 405 nm illumination, demonstrating effective self-driven photoresponse. With an applied reverse bias of −2 V, the device further reaches a responsivity of 161 mA/W and a detectivity of 8.6 × 1010Jones under 405 nm illumination. In addition, the device exhibits a low dark current of 5 pA and a high on/off ratio of 1180. These results demonstrate the potential of the MoSe2/SnS2vdW heterostructure for broadband and self-powered optoelectronic applications.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED POWDER TECHNOLOGY
·
2026
·Vol. 37
·期 9
·105406
·
IF 4.5
Hao Yang,Xuemei Deng,Changchun Yu,Zifeng Li,Xuting Sun,Hui Zhang,Qingming Chen,Yule Li
A series of La 0.8 Sr 0.2 Mn 1- x Fe x O 3 ( x = 0–0.03) ceramic materials were synthesized via the sol–gel method, and their structural, electrical, and magnetic properties were systematically investigated. Rietveld refinement of X-ray diffraction (XRD) patterns reveals that all LSMFO ceramics crystallize in a rhombohedral perovskite structure (space group: R 3 ¯ c ). Scanning electron microscopy (SEM) analysis demonstrates that appropriate Fe doping ( x = 0.01) can promote grain growth. With the increase of Fe doping content, both the temperature coefficient of resistance (TCR) and magnetoresistance (MR) of LSMFO samples exhibit a trend of first increasing and then decreasing. For the sample with x = 0.005, the TCR and MR reach their maximum (TCR peak and MR peak ) values: 6.48%·K −1 (peak TCR temperature T k = 301.48 K) and 27.06% (peak MR temperature T m = 304.21 K), respectively, with both corresponding temperatures close to room temperature. The optimization of electrical and magnetic properties of LSMFO samples is attributed to the improvement of grain boundary density and grain size by Fe doping. In summary, these results demonstrate that LSMFO ceramics hold broad application prospects in fields such as uncooled infrared bolometers and magnetic sensors.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2026
·
IF 11.8
Nazir Ahmad,Hussein A. Younus,Zafar A. K. Khattak,Adnan Ali Khan,Francis Verpoort
Metal–organic polyhedra (MOPs) are discrete and intrinsically porous molecular self-assemblies. MOPs exhibit rich surface chemistry; the existence of peripheral reactive sites is exploited by post-synthetic covalent and/or coordination-based polymeric structures by maintaining MOP identities. By further treatment, the dimensions of cuboctahedral MOPs are manipulated in an unprecedented manner into next-generation metal/metal oxides-doped carbon polyhedron nanocages/nanospheres. Herein, the predesigned mixed metal and metal oxides dopped carbon nanopolyhedral spheres/cages (M/MO@CNS) are obtained through the pyrolysis of MOPs. These composites are characterized by FTIR, Raman, PXRD, BET, ICP, XPS, FE-SEM, and TEM techniques. The spherical morphology of the nanomaterial is preserved as carbon spheres doped with metal-based nanoparticles (Cu 0 Co 0 /Cu 2 OCoO@CNS), demonstrating excellent electrocatalytic performance. Compared to commercial iridium oxide, the carbon nanospheres incorporating metals/metal oxides presented a high activity profile for alkaline water oxidation. Catalysts prepared at 600°C and 1000°C revealed maximum current densities, as compared to the commercial IrO 2 benchmark catalyst. The current densities of 10 mA/cm 2 recorded low overpotentials/η 10 and Tafel slopes than IrO 2, with lower charge transfer resistance. Combined post-catalysis analyses and DFT calculations demonstrate that the synergistic interaction within Cu 2 O/CoO@CNS optimizes the electronic structure and promotes electron transfer. It also balances the free energies of key intermediates and reduces the energy barrier of the OER rate-determining step, resulting in enhanced catalytic performance. The MOPs derived next-generation carbon-nanocages are tested for catalytic stability via chronopotentiometry, which shows that these composites remained stable during several hours of electrolysis.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Yuxin Lin,Qiyue Wan,Ying Li,Keke Hou,Changqing Cao,Hongtao Zeng,Jun Lin
Yttrium hydride (YH x ) has attracted significant research attention in fields such as solid-state moderators for advanced nuclear energy systems, owing to its superior hydrogen storage density. However, traditional preparation processes struggle to overcome the intrinsic contradiction between the requirement for high densification and severe high-temperature dehydrogenation. Therefore, this study prepared YH x monoliths using a hot-pressing sintering process and systematically investigated the densification mechanism and micro-defect evolution under a strong thermo-mechanical coupling field. The results indicate that 750∼775 °C is the optimal sintering temperature window for balancing optimal processing window balancing near-full densification with controlled hydrogen retention. Its densification mechanism is fundamentally governed by the evolution of deformation-stored energy. In the initial stage of hot-pressing consolidation, the mechanical compaction dominated by external axial stress injects a high density of geometrically necessary dislocations (GNDs) and deformation stored energy into the matrix. As the temperature rises, ample thermal energy effectively activates the dynamic recovery and recrystallization processes of the matrix, releasing the lattice distortion energy through significant structural relaxation and large-scale dislocation annihilation. These findings provide an important reference for fabricating high-performance YH x components for advanced nuclear applications.
✓ 已验证
DOI
高影响因子
Journal of Water Process Engineering
·
2026
·
IF 6.6
Luyao Jin,Jing Xu,Wei Cheng,Zufan Liu,Rémi Marsac,Charlotte Catrouillet,Shiyong Tao
Adsorption of quinolones on urban river sediments was investigated. • Molecular properties control relative adsorption strengths of quinolones. • Organic matter and iron oxide are key sediment controls on adsorption. • Predictive model integrating molecular and sediment factors was established. Quinolone antibiotics have been frequently detected in aquatic environments, where adsorption onto sediments plays a key role in controlling their environmental partitioning. This process is governed jointly by molecular structures and sediment characteristics, yet their coupled effects remain insufficiently quantified. To better understand and predict antibiotic adsorption onto urban river sediments, this study investigated the adsorption behaviors of 10 quinolone antibiotics using 14 sediments collected from urban rivers in Wuhan, China. Saturated adsorption capacities calculated using the Langmuir model ranged from 9.1 to 128.2 μmol g −1 on a selected sediment, spanning over an order of magnitude and reflecting the influence of specific molecular structures. Adsorption extents were revealed to vary with sediment types, emphasizing the role of sediment physicochemical characteristics. Predictive models describing the sediment-water partition coefficient ( K d ) were independently established based on molecular descriptors and sediment characteristics, achieving robust performance (R 2 > 0.80 and > 0.79, respectively). Analysis revealed that dipole interactions, dispersion and induction interactions, and hydrogen bonding associated with molecular structures, together with sediment organic matter and iron oxide contents, exert dominant controls on adsorption processes. Further, by integrating parameters of both molecules and sediments, an integrated predictive model was developed and validated with satisfactory performance (R 2 = 0.712), capturing adsorption behaviors across diverse sediment-compound combinations. These results provide quantitative insights into structure-reactivity relationships of adsorption on natural sediments, and highlight the significance of integrated frameworks for predicting interfacial adsorption processes of organic contaminants. Download: Download high-res image (257KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子