JOURNAL OF MOLECULAR STRUCTURE
·
2026
·
IF 4.9
Yingfang Li,Long Tian,Qingzhe Wu,Xiaohuan Long,Hai Wu,Chaoyong Deng,Weichao Huang
Mn 4+ -doped oxide phosphors with deep-red emission show significant application potential in plant-growth LEDs. In this study, double perovskite Ba 2- x Sr x GdSbO 6 : Mn 4+ deep-red phosphors were developed via a cation substitution strategy. The crystal structure, optical properties, and thermal stability of the phosphors were investigated in detail. The as-prepared phosphors showed an intense deep-red emission band around 625–750 nm. Cationic substitution with Sr 2+ significantly improved the luminescence performance of the Ba 2 GdSbO 6 : Mn 4+ phosphors, and the optimized sample BaSrGdSbO 6 : Mn 4+ was obtained, achieving a nearly 12-fold enhancement in emission intensity. Furthermore, the electroluminescence (EL) spectrum of the prototype LED device fabricated based on the BaSrGdSbO 6 : Mn 4+ phosphor is matched well with the absorption band of plant pigments. These findings demonstrate that the BaSrGdSbO 6 : Mn 4+ phosphors have potential applications in plant-growth LEDs, and also provide some guiding inspirations in the exploration of novel Mn 4+ -doped double perovskite phosphors.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.3
Jinqiu Zhuo,Wenwen Lv,Zixin Li,Yaodan Cao,Bingbing Li,Yusen Huangfu,Yuchun Zhang,Jiaxu Zhang,Jie Wu
Molten salt method was effective to improve the photocatalytic performance of graphitic carbon nitride (CN). Nevertheless, various complex reactions took place in flux, leading to the complicated CN molecular structure. Therefore, besides high photoactivity, it was necessary to illustrate the structure-function relationship. Herein, CN nanosheets (CN-S) were prepared. After post-treated by LiCl molten salts, the photocatalytic H 2 O 2 rate over as-obtained CN-S-LiCl- x was dramatically increased from 22.3 to 81.4 mM·g −1 ·h −1 , much higher than the sample post-treated by NaCl and KCl molten salts. Compared to the initial CN-S, the -C N groups, bulk N-defects and surface N-defects were controllably introduced in CN-S-LiCl- x. These critical structural factors on photocatalytic H 2 O 2 performance were quantitatively studied, and the bulk N-defects displayed the correlation of linear relationship as high as 0.945. Electrochemical tests and DFT calculation indicated bulk N-defects were served as the main O 2 adsorption sites with adsorption energy of −4.33 eV, which not only accelerated surface reaction, but also extended light harvest and improved separation efficiency of photoinduced charge carriers. In photocatalytic H 2 O 2 mechanism study, one-step two-electron reduction and two-step single-electron reduction performed simultaneously, while the latter was primary. Our work has conducted a detailed analysis on the relationship between various structural factors and H 2 O 2 yield, and identified the key role of bulk N-defects. This provides new ideas to investigate photocatalytic H 2 O 2 evolution mechanism and design efficient CN-based photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Haifeng Wang,Zhengsong Hu,Jie Xu,Chaoyang Li,Aokun Lin,Kunkun Zhu,Li Yu,Guanxiang Ma,Yuwen Liu,Haifeng Bao
Capturing gas bubbles in liquid is vital for the gas-liquid-solid (GLS) three-phase reactions due to the limited gas solubility. Constructing the special porous skeleton for bubble accommodation opens an opportunity to drag bubbles in liquid. Herein, mm-sized Pd-anchored cellulose/agarose (PCA) spheres with a highly porous architecture have been fabricated using a liquid nitrogen-freezing method. PCA particles could act as gas carrier to accommodate a variety of gas bubbles in liquid, including H 2 , O 2 , air, and CO 2 via an in-situ nucleation route. Moreover, these PCA beads enabled efficient multiphase catalysis as demonstrated by cascade reduction of a series of substances, such as aldehydes, nitroarenes, and alkenes. Their catalytic activities remarkably surpassed Pd-deposited solid glass spheres (PG) and sole Pd nanoparticles, manifesting the important role of their porous texture in gas harvesting and storage. A gas (H 2 ) utilization of 98.0 % was attained for multiphase reaction over PCA beads. During multiphase reaction process, a controllable motion of PCA spheres was achieved via gas reservation or consumption. This work provides a profound inspiration for bubble arresting and stabilization toward regulable movement and multiphase processes.
✓ 已验证
产品关联
DOI
高影响因子
Molecular Catalysis
·
2026
·
IF 4.3
Bo Liu,Jiating Li,Chunyan Xiang,Hongyue Pan,Zemin An,Yuanjie Xu,Lizhi Wu,Li Tan,Yu Tang
The direct conversion of methane into valuable chemicals under mild conditions represents a promising technological pathway, yet achieving both high efficiency and selectivity remains a major challenge in catalysis. In this work, we report a rhodium catalyst atomically dispersed on ZSM-5 for catalytic conversion of methane to oxygenates using H 2 O 2 as oxidant under mild conditions. With carbon monoxide (CO) as a promoter, the catalyst achieved an oxygenates productivity of 46.8 mmol·g cat −1 ·h −1 (equivalent to 9360 mmol·g Rh −1 ·h −1 or 964.1 mol·mol Rh −1 ·h −1 ) with approximately 90.7 % overall selectivity (including liquid products and gaseous CO 2 ). The catalyst retained high activity over five recycling experiments. A combined investigation by HAADF-STEM, XAFS, and DRIFTS-CO analyses confirms that the active sites consist of atomically dispersed Rh species in a Rh 1 O 5 configuration anchored within the ZSM-5 micropores. Mechanistic studies, including controlled experiments, EPR, and in situ infrared spectroscopy, reveal that CO plays a dual role. It promotes the formation of ·OH radicals from H 2 O 2 and facilitates the activation of methane, leading to the generation of ·CH 3 species. Oxygenate products are produced via the direct coupling of ·CH 3 , ·OH, and CO molecules. This work highlights the potential of tailoring atomically dispersed metal catalysts and using CO as reactant and promoter to enable efficient methane transformation into valuable oxygenates.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
·
2026
·Vol. 37
·期 1
·32
·
IF 4.5
Yuanzheng Wang,Qilin Jiang,Xin Huang,Shaohong Wu,Jinlong Li,Jian Cao,Zhongxing Liu
The development of bone repair scaffolds has long been a research hotspot in tissue engineering. Owing to its unique capability for personalized customization of scaffold geometry and microstructure, 3D printing technology has been extensively adopted for fabricating bone repair scaffolds. Poly-L-lactic acid (PLLA), endowed with favorable biodegradability, excellent biocompatibility, and reliable in vivo safety, is widely used as a matrix material for 3D printed bone repair scaffolds. PLLA is a bioinert polymer characterized by inferior cell adhesion and osteogenic differentiation capabilities. To mitigate this bioinertness limitation, the present study employed N-methylpyrrolidone (NMP) etching to modify the surface of 3D-printed PLLA bone repair scaffolds. Following NMP etching for 1–24 h, the originally smooth scaffold surface evolved into a hierarchical, petal-like gradient microstructure, accompanied by a marked increase in surface roughness. Correspondingly, the hydrophilicity of the treated scaffolds was also enhanced. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analyses further confirmed that the crystallinity of PLLA in the scaffolds was significantly enhanced. Concomitantly, the modified scaffolds exhibited a marked improvement in adsorption capacity for green fluorescent protein (GFP), while the adhesion and proliferation of MC3T3-E1 on their surface were also significantly promoted. In vivo animal experiments demonstrated that the NMP-etched scaffolds could accelerate the process of bone defect repair. Collectively, surface modification of 3D-printed PLLA bone scaffolds via NMP etching enables precise modulation of their physicochemical properties, thereby effectively mitigating the inherent bioinertness limitation of PLLA scaffolds. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COMPOSITES PART B-ENGINEERING
·
2026
·
IF 14
Hao-hao Song,Zi-cheng Tang,Zi-jie Huang,Qin Wang,De-xiang Sun,Jing-hui Yang,Xiao-dong Qi,Yong Wang
Lightweight multifunctional materials capable of mitigating electromagnetic interference (EMI) and infrared radiation are highly desirable for aerospace and military equipment. Conventional MXene aerogels still suffer from temperature rise under transient thermal shock due to their limited heat capacity and relatively high thermal diffusivity. Herein, phase change microcapsules (PCCs) with latent heat absorption capability were introduced into the MXene aerogel framework via ice-templated assembly. The MXene/PCC (MP) aerogels possess a three-dimensional (3D) porous structure with uniformly dispersed PCCs, achieving a low thermal conductivity of 0.0493 W m −1 K −1 . Moreover, the embedded PCCs actively absorb heat through solid-liquid phase transitions, thereby increasing heat capacity (28.38 J g −1 K −1 ) and suppressing thermal diffusivity (0.08 mm 2 s −1 ), effectively delaying heat propagation. By combining porous thermal insulation, phase‐change heat absorption, and low infrared emissivity of MXene, the MP aerogels markedly enhance resistance to transient thermal shock, maintaining a bottom-region temperature up to 9.67 °C lower than that of the MXene aerogel under 120 °C heating. Finally, the 3D conductive MXene network provides continuous electron pathways and interfaces for polarization and multiple reflections, while PCCs effectively absorb heat generated by electromagnetic losses, achieving reflection-dominated EMI shielding of 35.44 dB. By embedding PCCs into the framework of MXene aerogels, the simultaneous construction of a microporous structure and a phase-change skeleton endows the MXene aerogels with excellent infrared stealth and EMI shielding performance, thereby demonstrating their applicability in aerospace and defense fields.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2026
·
IF 3.6
Yu Yao,Xinrong Chen,Feng Wang,Heyu Wang,Bingguo Liu,Jian Xu,Baoli Du,Liqiang Ma,Aochen Du,Carsten Dam-Hansen,Ole B. Jensen
The development of ultra-high-brightness laser-driven phosphor-converted light sources is significantly challenged by high-power-density laser irradiation, primarily due to the thermal quenching effect induced by excessive heat accumulation in the phosphor. Conventional approaches aimed at improving the heat dissipation performance of phosphor converters, such as phosphor-in-glass (PiG) and ceramic plates, often requiring the use of attached substrates and thermal interface materials (TIMs), tend to be relatively complex and susceptible to delamination at the interfaces. Here, we proposed a fast, low-cost and TIM-free fabrication of monolithic ceramic-glass modules with integrated top YAG:Ce phosphor layer and bottom alumina layer (as substrate). In the fabricated modules, tight interfacial bonding without cracks was achieved between the phosphor layer and the alumina layer, which is attributed to their matched thermal expansion coefficients as well as a shared glass component. The effects of the phosphor layer’s thickness and glass ratio were examined with respect to the absorption of incident light and the subsequent heat dissipation, as the luminous efficacy is directly governed by the converter’s thermal management. Also, the effects of thickness and glass ratio of phosphor layer on fluorescent-emitting spot expansion (compared to laser spot) and luminous exitance were also investigated. This study not only provides a novel design of a phosphor module for laser lighting but also identifies the critical parameters for enhancing its photo-thermal performance to meet the demands of higher-power laser lighting applications.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Qianshan Xia,Chengqi Li,Yan Wang,Xinda Wang,Tianyi Liu,Peng Cui,Bai Han,Guangping Song,Xuan Wang
The electromagnetic pollution has drawn attention to microwave absorption materials. MXene (Ti 3 C 2 T x ) nanosheets is promising for microwave absorption due to excellent electrical conductivity. However, their microwave absorption performance is limited by poor impedance matching. In this study, MXene nanosheets were prepared through etching of Ti 3 AlC 2 precursors with ammonium hydrogen difluoride. A manganese dioxide/MXene nanocomposite was then fabricated via the hydrothermal method. The microwave absorption performance of the composite was systematically investigated. The results showed that precise regulation of manganese dioxide content could simultaneously optimize the impedance matching and microwave attenuation ability. When the mass ratio of potassium permanganate to MXene was 1:1, the effective absorption bandwidth and reflection loss of the nanocomposite were 3.18 GHz and −34.05 dB (1.2 mm), respectively. Therefore, the manganese dioxide/MXene nanocomposite has potential for microwave absorption applications.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.1
Fengsheng Li,Tao Hu,Zikang Guo,Chun Huang,Xiangxiang Fan
To enhance the integration of metal oxide semiconductor (MOS) gas sensor array in electronic nose, a sensor array structure based on multiplex sensing electrodes was proposed. Four multiplex sensing electrodes were designed and fabricated on silicon substrate. A heterogeneous sensing material, consisting of SnO 2 thin film and aligned Co 3 O 4 nanofibers, was subsequently prepared on the substrate by magnetron sputtering and electrospinning. By combining different sensing electrodes, the surface-modification-type sensors of SnO 2 @Co 3 O 4 and Co 3 O 4 @SnO 2 and the heterojunction-type sensors of SnO 2 -Co 3 O 4 and Co 3 O 4 -SnO 2 were constructed and formed the gas sensor array. At the operating temperature of 270 °C, the sensors on the array exhibited distinctive responses to ethanol. Co 3 O 4 @SnO 2 exhibited the highest response of 48 to 50 ppm ethanol among all the sensors. Toward the same concentration of ethanol, SnO 2 -Co 3 O 4 and Co 3 O 4 -SnO 2 showed the shortest response time of 1 s, while Co 3 O 4 -SnO 2 additionally presented the shortest recovery time of 34 s. the four sensors also showed different selectivity responses to the gases of ethyl acetate, benzene, methanol and isopropanol. Besides, a hybrid model of CNN-transformer was used to analyze the collected gas response signals of Chinese baijiu with varying concentrations of edible alcohol. With the dataset from the sensor array, the model converged rapidly and achieved a recognition accuracy of 98%. These results confirmed that the sensor array based on multiplex sensing electrodes was an effective design for the integrated gas sensor arrays of electronic noses
✓ 已验证
产品关联
DOI
高影响因子
WATER AIR AND SOIL POLLUTION
·
2026
·Vol. 237
·期 8
·484
·
IF 3
Dai Wei,Dai Ying,Zhang Di,Daniel Jesse,Zhong Xing,Li Zhuyao,Tao Qinqin
Radioactive wastewater containing high concentrations of radionuclides threatens ecosystems and human health. Developing environmentally friendly adsorbents with high enrichment efficiency and ease of solid–liquid separation is essential for removing europium from wastewater. In this study, three amide podand derivatives with different alkyl chain structures were loaded onto polyacrylonitrile via electrospinning, yielding DODGA@PAN, DPDGA@PAN, and DEHDGA@PAN nanofibers. The presence of two carbonyl oxygens and one ether oxygen in these materials enhances coordination with trivalent metal ions, making them highly efficient in europium removal.In reuse tests, DODGA@PAN and DPDGA@PAN maintained strong performance, with only 3.84% and 3.87% decreases after five adsorption–desorption cycles, respectively. In contrast, DEHDGA@PAN, due to its branched structure, exhibited higher adsorption capacity but lower reusability. This branched structure increased porosity, improving adsorption while also causing deformation, reducing its durability. Europium removal efficiency varied with changes in pH, temperature, time, and initial concentration. The Langmuir isotherm model confirmed effective europium adsorption by all three nanofibers. Kinetics indicated chemisorption, while thermodynamics showed the process was endothermic and spontaneous.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2026
·
IF 2.5
Runze Miao,Yu Liu,Hui Wang,Guangwei Yu,Shi'’an Wang,Juanjuan Su,Feng Han
This study developed a robust, cost-effective thin-layer chromatography (TLC) combined with gas chromatography (GC) protocol for the regiospecific analysis of triacylglycerols (TAGs), with application to microbial oils from engineered Yarrowia lipolytica . Key steps, such as sn -1,3-specific lipase hydrolysis, TLC separation, staining, and fatty acid methyl ester (FAME) derivatization, were systematically optimized. Porcine pancreatic lipase was identified as the most efficient and economical enzyme for hydrolysis. A petroleum ether/diethyl ether/acetic acid (32:8:0.8, v/v/v) TLC solvent system provided optimal resolution, with iodine vapor as the preferred non-destructive staining method. BF 3 -methanol methylation prevented artifact formation observed with methanol-H 2 SO 4 . Applied to oils from strains producing nervonic acid (NA) and γ-linolenic acid (GLA), the method revealed distinct regiospecific patterns: NA was almost exclusively esterified at the sn -1,3 positions, whereas approximately 64.3% of GLA resided at the sn -2 position. This TLC-GC approach offers an accessible alternative for rapid screening of fatty acid positional distribution in TAGs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2026
·
IF 3.8
Xia Yong,Wang Qi,Wang Xu,Shan Liancong,Zhang Bo,Li Sheng,Guo Chang
The accurate and rapid detection of fluoroquinolone antibiotics (FQs) is crucial, yet their structural homology often leads to cross-reactivity that compromise accuracy. Herein, we designed a poly(3,4-ethylenedioxythiophene) doped with a poly(styrenesulfonate) (PEDOT:PSS)-based dual-channel organic electrochemical transistor (OECT) array on a flexible, low-cost polyimide substrate. By leveraging the synergistic catalysis of single-walled carbon nanotubes (SWCNTs) and gold nanoparticles (AuNPs), effective discrimination of three FQs was achieved using gate electrodes modified with only two Nafion/SWCNTs/AuNPs composites, differing solely in AuNP mass fraction—this significantly simplifies fabrication for an electronic tongue system (ETS). Aided by principal component analysis (PCA), the system discriminates and quantifies ofloxacin (OFL), levofloxacin (LEV), and ciprofloxacin (CIP) across a wide concentration range of 0.4–1000 μM, with limits of detection (LODs) of 0.32–0.40 μM, while exhibiting excellent selectivity, anti-interference, consistency, stability, and rapid response. The comprehensive performance of this platform establishes a practical foundation for portable FQ sensing in environmental and clinical applications. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子