JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Songjie Li,Tiantian Liu,Shuang Yu,Xiaomei Yu,Huijing Yang,Chengduo Wang,Jin You Zheng
Hydrogen production via electrocatalytic water splitting has garnered significant attention, due to the growing demand for clean and renewable energy. However, achieving low overpotential and long-term stability of water splitting catalysts at high current densities remains a major challenge. Herein, a CoP@CoNi layered double hydroxide (LDH) electrode was synthesized via a two-step electrodeposition process, demonstrating oxygen evolution reaction, with an overpotential (ƞ 400 ) of 373 mV and a Tafel slope of 64.2 mV/dec. Subsequently, a superhydrophilic CoP@CoNi LDH-Pt electrode was prepared using an in situ oxidation method, with Pt clusters anchored within the CoP@CoNi LDH for the hydrogen evolution reaction, with an overpotential (ƞ 400 ) of 119 mV and a Tafel slope of 33.6 mV/dec. The CoP@CoNi LDH-Pt||CoP@CoNi LDH system achieved a cell voltage of 1.96 V at 1000 mA/cm 2 , maintaining stable performance after water electrolysis for 160 h. These remarkable outcomes stem from the fast charge transfer, improved mass transfer, and superior stability of the catalysts. Heterostructure electrodes were constructed to optimize the electrocatalytic kinetics through strong interfacial electronic interactions, while superhydrophilic electrodes were fabricated to improve the mass transfer process at a high current density. Anchoring high-activity components in catalysts prevents their detachment during water electrolysis, enhancing the structural stability of the electrodes. This study provides a new approach for large-scale preparation of efficient water electrolysis catalysts and offers significant potential for industrial hydrogen production applications.
研究领域:
材料科学
·
能源科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF CHEMISTRY
·
2024
·
IF 5.5
Qingyong Guo,Rongsheng Xiao,Haifeng Chen,Meishuo Bao,Jingwen Qi,Qian-qian Jia,Wuxiang Zhang
Comprehensive Summary Real-time on-site monitoring of resorcinol (RS) concentrations is crucial for detecting hazardous levels, enabling prompt response measures to mitigate potential environmental and health risks. In this study, we developed an innovative method using CoNi@CN-2 nanozymes to activate peroxymonosulfate (PMS) for oxidizing 3,3',5,5'-tetramethylbenzidine (TMB). Our results show that the formation of Ni 2+ through the oxidation of Ni 0 on the CoNi@CN-2 surface significantly enhances the electron-donating capacity of Co 0 . The catalytic reaction of TMB is mediated by redox active species (SO 4 •− , •O 2 − , •OH and 1 O 2 ). RS drives colorimetry by transferring electrons to the benzene ring and specific nitrogen atoms in ox-TMB, reducing ox-TMB to TMB. Furthermore, the colorimetric assay shows a robust linear correlation between RS concentration and absorbance (Abs), described by Abs = –0.44[RS] + 0.886 (0—200 μmol/L, R 2 = 0.983). Also, we introduce a novel smartphone-integrated autonomous detection software that can analyze RS concentration and grayscale values (GSV), yielding GSV = 0.327[RS] + 63.601 (0—200 μmol/L, R 2 = 0.990) with a detection limit of 5.29 μmol/L. Additionally, excess PMS leads to ROS attacking specific sites in ox-TMB, forming secondary oxidation products. This study has enabled rapid and accurate detection of RS, making a significant contribution to environmental safety and protection.
研究领域:
环境科学
·
生物化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Yu Zhou,Xinyu Song,Shenggang Yan,Chunhua Ni,Li Xu,Liangmin Yu,Xia Li
Biomass-derived carbon has attracted extensive attention because of its unique form, wide range of sources and low cost. However, the construction of efficient biomass-based microwave absorbers with hierarchical structures and multicomponent magnetic/dielectric structures remains a great challenge. Therefore, CoNi-MOF was self-assembled in situ on the plant Juncus effusus by the microwave method, and CoNi/NC/C composites were prepared by in situ pyrolysis in a nitrogen atmosphere. The morphology, electromagnetic parameters, specific surface area and porous structure of the composites were adjusted by controlling the pyrolysis temperature. For a pyrolysis temperature of 600 ℃ and filling of 16 wt%, the composite was found to show an RL min value of − 64.3 dB at 12.88 GHz at a thickness of 2.5 mm, and the effective absorption bandwidth (EAB)reached 7.36 GHz. The excellent microwave absorption performance was attributed to conduction loss, dipole polarization, interface polarization, magnetic loss and balanced impedance matching.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Yuehong Xie,Chao Feng,Yuan Guo,Shiang Li,Cheng Guo,Yi Zhang,Jide Wang
This paper introduces a facile strategy to fabricate trifunctional electocatalysts through one pool treatment on MOFs to obtain carbon nanotube coated ultrafine CoNi alloy (CoNi@NCNTs) nanocomposites with N-doped rich-defect and abundant cavity structure. During the pyrolysis process, volatile CNx species from dicyandiamide were trapped by ZIF-67@Ni-ZIF nanosheets, simultaneously introducing nitrogen atom into carbon matrix to achieve the rich-defect porous nanotubes and abundant cavity structure. The as-prepared nanomaterials can simultaneously boost the ORR, OER and HER catalytic activity with strong durability. Significantly, the CoNi@NCNTs-700 exhibits excellent electrocatalytic activity including half-wave potential (E ORR, 1/2 ) of 0.80 V, lower operating voltage (E OER, 10 ) of 1.60 V at 10 mA cm −2 and potential difference (ΔE) of 0.80 V between E OER, 10 to E ORR, 1/2 in 0.1 M KOH, and low overpotential (E HER, 10 ) of −0.130 V reaching 10 mA cm −2 in acidic medium. The remarkable activity is ascribed to defect-rich porous carbon nanotubes structure and the synergistic effect between CoNi alloy nanoparticles, N-dope carbon and CoNi-Nx. And hollow structure facilitates to improve conductivity and stability. This work offers a useful archetypical template to design and construct efficient and stable trifunctional electrocatalysts, illustrating its viability for practical applications of energy conversion and storage devices.
研究领域:
材料科学
·
电化学
·
能源转换与存储
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Yu Zhang,Wangfeng Cai,Yajie Guo,Yan Wang
In this work, a nanosheet-assembled core-shell structure composite of Co-Ni-S@CoNi-LDH was prepared on Ni foam via hydrothermal synthesis , in which Co-Ni-S nanowires as cores were assembled with the shell of CoNi-LDH nanosheets. The combination of the high conductivity of Co-Ni-S, the high specific surface area of CoNi-LDH and the multivalent state of Ni and Co provided more active sites, short and effective ion transport paths, and great synergy, which played significant roles in the excellent performance of Co-Ni-S@CoNi-LDH. Meanwhile, the nanosheet-assembled core-shell structure improved the overall stability. Based on the characterisation and the performance measurements, the Co-Ni-S@CoNi-LDH electrode showed an excellent electrochemical performance. The Co-Ni-S@CoNi-LDH electrode acquired a specific capacitance of 2414 F/g at a 1 A/g current density and a high cycle stability with an 89.7% retention after 3000 cycles. The assembled hybrid supercapacitor Co-Ni-S@CoNi-LDH//AC delivered a high energy density of 59.11 Wh kg −1 at an 855.43 W kg −1 power density, as well as an excellent rate performance of 81% after 5000 cycles at a 5 A/g current density, showing good potential for practical applications.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Yichen Liu,Yaqi Liu,Guicheng Luo,Zuozheng Xu,Xuhao Sun,Yuan Zhu,Shuyi Wu,Lizhe Liu,Yun Shan
To efficiently control oxygen evolution reaction (OER) at electrocatalysts holds enormous promise for large-scale production of clean energy, but faces the scarcity of practical regulation strategies due to underexplored catalytic mechanism. Herein, a facile and feasible strategy is developed involving metal-metal super-exchange interaction to manipulate the electronic state configuration of catalysts, and the as-synthesized Ni-doped Co-1,3,5-benzenetricarboxylic acid Metal-Organic Frameworks (MOFs) only require an overpotential as low as 260 mV to reach a large current of 200 mA cm −2 , which is much lower than 400 mV for the commercial RuO 2 catalyst. The introduced Ni atoms lead to more broadly occupied states and d-band center close to the Fermi energy level for the spin-polarization of the electrons in Co atoms, thus decreasing the orbital occupancy to facilitate the adsorption/desorption of the reaction intermediates and lowering the rate-determining step barrier to accelerate OER. Our findings have an important paradigm role in the design of electrocatalysts with high performance for oxygen evolution reaction.
研究领域:
电化学
·
催化
·
材料科学
·
能源存储与转换
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Gaoqiang Yu,Mingquan Ye,Aijun Han,Qingzhong Liu,Yaojing Su,Cheng Chen
Developing composite materials with a rational composition structure has been a critical strategy to obtain superior electromagnetic (EM) wave absorption materials. CoNi/MoSe 2 composites were synthesized by a two-step method in this work. Firstly, the flower-like MoSe 2 was synthesized by hydrothermal method , and then the CoNi alloy was loaded on the MoSe 2 surface by an electroless plating method. It is worth noting that in this paper, PdCl 2 was not used for activation during the electroless plating process, and the flower-like structure of MoSe 2 was not destroyed. In order to investigate the effect of different Co/Ni molar ratios on the absorption performance of the CoNi/MoSe 2 composites, three samples with Co to Ni molar ratios of 1:3, 1:1, 3:1 and two other samples with only one metal (Ni or Co) were prepared. The analysis results show that the minimum reflection loss(RL) value of Ni/MoSe 2 is −18.01 dB and the maximum effective absorption bandwidth(EAB) of Co/MoSe 2 is 2.16 GHz. In comparison, the CoNi/MoSe 2 composite exhibits the best EM wave absorption performance when the Co/Ni ratio is 1:3, and the minimum RL can reach −48.6 dB at a matching thickness of only 1.8 mm. And when the matching thickness is 1.4 mm, the broadest EAB is 3.76 GHz. Therefore, this work provides a new research idea for the design of broadband and efficient EM wave absorbers.
研究领域:
材料科学
·
电磁学
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Guangyao Hou,Xin Jia,Hongjun Kang,Xianshu Qiao,Yang Liu,Yang Li,Xiaohong Wu,Wei Qin
ABSTRACT Developing efficient and stable OER catalysts is conducive to improving hydrogen production efficiency and achieving “carbon neutrality” goal. Herein, a CoNi nano-alloys modified yolk-shell carbon cage (CoNi/NC-YS) catalyst was synthesized through a green synthesis method, which shows an outstanding OER activity with a low overpotential of 292 mV at 10 mA·cm −2 , and a robust OER catalytic stability. The experimental and density functional theory (DFT) results demonstrate that the hydrophilic yolk-shell CoNi/NC-YS catalyst with large specific area contributes to exposing more active sites, and increases the reaction contact area between catalysts and electrolyte. Meanwhile, CoNi nano-alloys can regulate the electronic configuration of CoNi/NC-YS catalyst and optimize Gibbs free energies for water adsorption, accelerating OER process in alkaline media and showing an outstanding OER performance. This work can provide a low-cost and green strategy to construct nano-alloys modified yolk-shell OER catalysts for renewable energy systems.
研究领域:
材料科学
·
能源科学
·
催化化学
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2025
·
IF 3.3
yuan yuan li,Zhe Zou,Mingqiang Ning,ming Gao,Qikui Man
Multifunctional integrated electromagnetic wave absorption (EMA) materials have been widely concerned. In this work, CoNi/MXene@Wood was prepared by carbonizing natural wood at high temperature and introducing CoNi and Ti3C2Tx MXene into its rectangular honeycomb unit by hydrothermal reaction and vacuum impregnation. Due to the reasonable control of structure and composition, CoNi/MXene@Wood can be employed for both electromagnetic protection and infrared stealth. CoNi/MXene@Wood-1.5 displays excellent EMA performance with a minimum reflective loss (RLmin) of −56.8 dB and the effective absorbing bandwidth (EAB) covering the entire X-band. Besides, with low and stable thermal conductivity (0.219-0.267 W m-1 K-1) over a temperature range of 298-673 K, the CoNi/MXene@Wood can realize the thermal infrared stealth of protected targets in different environments. The structure design and dielectric constant adjustment provide strategies for obtaining high EMA performance materials with infrared stealth.
研究领域:
材料科学
·
电磁学
·
纳米技术
·
红外技术
·
复合材料
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF FOOD COMPOSITION AND ANALYSIS
·
2025
·
IF 4.6
Yuxia Zhang,Zitong Yang,Jingyu Deng,Yili Zhang,Hongzhen Li,Chen Li,Wenyuan Xu,Zhaohui Hou,Binbin Zhou
The current study aimed to present a molecularly imprinted electrochemical sensing platform for bisphenol A (BPA) detection by synergistically combining conductive RGO-PANI hybrids with porous CoNi-MOF. The RGO-PANI network facilitated electron transfer efficiency, while the porosity of CoNi-MOF enhanced molecular recognition capacity through expanded surface area and tailored recognition cavities. The conditions affecting the determination of BPA were also optimized. A linear increase of the current signal was observed in the concentration range of 1–500 nM BPA. The corresponding detection limit was calculated to be 0.36 nM. Selectivity tests showed good adsorption to BPA, which was attributed to the specificity of the MIP film. Practical validation recoveries of 95.12–103.18 % (RSD<3.6 %) were achieved in milk samples, demonstrating reliability in complex matrices. This study balanced sensitivity and cost-effectiveness compared to other sensors. This sensor provided a viable method for environmental and food safety monitoring.
研究领域:
电化学传感
·
环境监测
·
食品安全
·
纳米材料
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Yue Du,Zhiyi Zhong,Zhixian Shi,Lina Zhou,Song Pan,Xiaonan Xu,Yisi Liu,Dongbin Xiong,Kai Wang
The development of carbon-encapsulated alloy catalysts, through a rational design that integrates highly active Me-N-C sites, is essential for improving the reaction kinetics of both oxygen reduction (ORR) and oxygen evolution reactions (OER). This advancement is pivotal for the progression of efficient rechargeable zinc-air batteries (RZABs). In this study, we investigates a CoNi alloy decorated N-doped carbon nanotube (CoNi-NCNT) electrocatalyst using a dual-ligand strategy. Experimental characterizations and theoretical calculations reveales that the electronic modulation of the 3 d orbitals of the CoNi alloy by the CoN 3 sites enhances electronic conductivity during the ORR/OER process, leading to exceptional bifunctional activity. Electrochemical evaluations demonstrates the outstanding performances of CoNi-NCNT, with a half-wave potential of 0.81 V (versus RHE) for ORR and a low overpotential of 1.52 mV for OER at 10 mA cm −2 . Moreover, the CoNi-NCNT catalyzed Zn-air battery exhibits a remarkable specific capacity of 780 mAh g −1 and an exceptionally extended lifespan exceeding 800 h. This underscores the potential of this alloy strategy in the development of high-performance bifunctional ORR/OER electrocatalysts.
研究领域:
材料科学
·
电化学
·
能源存储
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
M. Usman Tahir,Hina Arshad,Heng Zhang,Zhiyan Hou,Jide Wang,Chao Yang,Xintai Su
Single imidazolate framework-67 (ZIF-67) is commonly used as a template to prepare layered double hydroxides (LDHs) with specific morphology to improve the performance of materials. Herein, the Co 2+ ion in ZIF-67 is partially substituted by Ni 2+ to obtain the dodecahedron bimetallic imidazolate framework (CoNi-ZIF). Subsequently, using bimetallic CoNi-ZIF as the sacrificial template, CoNi-LDH hierarchical hollow cage structures with wrinkled nanosheet arrays are synthesized at room temperature and in aqueous solution by an inexpensive and environment friendly surfactant-free approach. The optimized etched CoNi-LDH4 has a maximum specific capacitance of 1877 F g −1 at a current density of 1 A g −1 , and cycling stability of 99.89% after 5000 cycles, which is significantly better than that of ZIF-67 derived CoNi-LDH67 (1357 F g −1 at 1 A g −1 , cycling stability of 73.35%). The asymmetric supercapacitor with CoNi-LDH4 as a cathode and activated carbon (AC) as anode has an energy density of 49.3 Wh kg −1 at 750 W kg −1 power output and stable cycling performance (capacity retention of 92.13% after 5000 cycles). This study shows the prospect of bimetallic CoNi-ZIF derived LDHs nanostructures prepared at room temperature and in aqueous solution to improve the performance and stability of supercapacitors.
研究领域:
材料科学
·
电化学
·
纳米技术
·
能源存储
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）