INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Qing Yin,Jiali Liu,Zicheng Zhong,Yueyuan Zhang,Feiran Zhang,Mingming Wang
In this study, chitosan (CS) and phytic acid (PA) were employed as raw materials to synthesize a range of chitosan–phytic acid complexes (CP) with different ratios (CS:PA = 12:1, 9:1, 6:1, 3:1, 1:1). The structures and elemental compositions of the compounds were characterized using Fourier-Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS). The thermal stability of the synthesized materials was analyzed using a Thermogravimetric Analyzer (TG). Electrochemical testing was conducted to explore the corrosion inhibition effect of the modified inhibitors with varying ratios on Q235 steel in 3.5 wt% NaCl solution. Additionally, Scanning Electron Microscopy (SEM) was utilized to investigate the surface morphology of the immersed samples. When the CS:PA ratio was 3:1, CP exhibited an impressive corrosion inhibition efficiency of 94.9 %. Furthermore, the antimicrobial properties of CP were evaluated using the colony plate counting method. At a CS:PA ratio of 1:1, CP demonstrated the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) at 0.1250 % and 0.5000 %, respectively. This research introduces a novel green corrosion inhibitor capable of simultaneously reducing the electrochemical corrosion of Q235 while inhibiting biocorrosion, avoiding the antagonistic effects arising from the simultaneous use of biocides and corrosion inhibitors in the system.
研究领域:
材料科学
·
腐蚀工程
·
生物技术
·
化工工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Yingbi Chen,Jiali Tang,Shixing Wang,Libo Zhang
A chitosan-based adsorbents (CS-Ninhydrin) was prepared by grafting ninhydrin for Pb(II) ions adsorption. SEM-EDS, XRD and FTIR analysis were used to characterize the synthesized CS-Ninhydrin. The static adsorption experiments showed that CS-Ninhydrin had a good removal rate for Pb(II) ions in a wide range of pH 3 to 7, quickly reached equilibrium (120 min) and had a higher adsorption capacity (196 mg/g). Pseudo second-order and Langmuir models showed that the adsorption process of Pb(II) by CS-Ninhydrin was a single-layer chemical adsorption. Temperature experiments showed that the reaction was a spontaneous exothermic process. In the wastewater experiment, CS-Ninhydrin showed an excellent selectivity to Pb(II) ions. The reusability of CS-Ninhydrin was perfect after five adsorption-desorption cycles. The main adsorption mechanism was the chelating and electrostatic action between N and O groups in CS-Ninhydrin and Pb(II) ions. Therefore, the new adsorbent CS-Ninhydrin was expected to promote the wide application of chitosan in Pb(II) adsorption.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2020
·Vol. 10
·期 71
·43762-43772
·
IF 3.119
Qianqian Zhao,Guo Feng,Feng Jiang,Shanfang Lan,Junhua Chen,Mengting Liu,Zuzhi Huang,Jianmin Liu,Qing Hu,Weihui Jiang
Fe2TiO5/C photocatalysts were synthesized by a solid-state reaction method (Fe2TiO5/C(S)) and nonhydrolytic sol–gel (NHSG) method (Fe2TiO5/C(N)), where C was introduced by external carbon and in situ carbon sources, respectively. The Fe2TiO5/C(N) photocatalyst with in situ carbon has much better photocatalytic degradation efficiency than that of Fe2TiO5/C(S) synthesized by doping external carbon. The superiorities of in situ carbon were demonstrated by SEM, EDS, BET and photoelectrochemical analysis. Compared with Fe2TiO5/C(S) using external carbon as a carbon source, Fe2TiO5/C(N) with in situ carbon exhibits more uniform elemental distribution, much larger surface area, higher photocurrent density and lower resistivity of interfacial charge transfer. The results show that the introduction of in situ carbon via the NHSG method more easily promotes the separation of photogenerated electron–hole pairs, owing to the uniformity of the carbon element, thereby improving the photocatalytic activity of the photocatalyst.
研究领域:
材料科学
·
光催化
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2023
·
IF 8.8
Langrun Song,Jun Nan,Bohan Liu,Fangmin Wu
Excessive phosphorus in water causes environmental security problems like eutrophication . Advanced two-dimensional material MXene has attracted raising attention in aquatic adsorption, while lack of selectivity and difficult recovery limit its application in phosphate removal . In this study, Ti 3 C 2 -MXene embedded zirconium-crosslinked SA (MX-ZrSA) beads were synthesized and their phosphate adsorption performance under different conditions was assessed. Investigations using SEM/EDS, XRD, BET, TGA and contact angle meter reveal that the addition of Ti 3 C 2 -MXene enhanced the thermal stability, mechanical strength, hydrophilicity, and formed loose network-like mesoporous inner structure with large surface area. The theoretical maximum adsorption capacity was 492.55 mg P/g and was well fitted by Freundlich and optimized Langmuir models. The Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis showed that chemisorption was involved, and the formation of Zr–O–P and Ti–O–P complexes accounted for high selectivity and affinity to phosphate. The adsorption experiments in real waters and lab-scale continuous flow Anaerobic-Anoxic-Oxic reactor further indicated the application potential of MX-ZrSA beads. Our study will provide insight into MXene and SA aerogel synergistic adsorption of aquatic contaminants and help with the removal and recovery of finite phosphorus resource.
研究领域:
环境科学
·
材料科学
·
水处理
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTRONIC MATERIALS
·
2022
·Vol. 52
·期 1
·547-558
·
IF 2.047
Zhou Jian,Ren Sili
The phosphor-converted white light-emitting diode (WLED) has received tremendous attention as a promising alternative to traditional light sources in lighting and displays. Herein, a novel broadband red emitter Ca 2 Sr(PO 4 ) 2 :Mn 2+ was successfully designed and synthesized based on the Sr-alloying and Mn-doping of Ca 3 (PO 4 ) 2 . The phase purity of the materials was verified by x-ray diffraction (XRD) analyses, while a scanning electron microscope (SEM) coupled with an energy-dispersive spectrometer (EDS) was employed to confirm the uniform dopant distribution. XRD Rietveld refinements were further performed to clarify the site occupation of alloying Sr and the Mn dopants. Effective site engineering confined the Mn dopants in a highly symmetric Ca5 site and excluded the immersion of Sr, leading to an extraordinarily long fluorescence lifetime. Density functional theory (DFT) simulations also revealed the good potential of the materials as host matrices for activators such as Mn 2+ . Finally, Ca 2 Sr(PO 4 ) 2 :Mn 2+ was used to fabricate a WLED prototype based on a near-ultraviolet (n-UV) commercial LED chip, which realized a warm white-light emission and high color rendering index (Ra) of 82.9. This WLED was able to survive the long-term stability test while maintaining high luminous efficacy of ~ 60 lm/W within 20 h, showing its great potential in practical applications.
研究领域:
材料科学
·
光电技术
·
照明技术
·
固体物理
✓ 已验证
DOI
高影响因子
CHEMOSPHERE
·
2023
·
IF 8.8
Xiangchu Zeng,Guanghua Zhang,Jia Wen,Xiuling Li,Junfeng Zhu,Zhe Wu
Heavy metals and azo dyes caused huge harm to the aqueous system and human health. A magnetic chitosan/polyethyleneimine embedded hydrophobic sodium alginate composite ( MCPS ) was designed and prepared to simultaneously remove aqueous same ionic type heavy metals and azo dyes. In mono-polluted system, the optimal pH for Cr(VI), MO (methyl orange), Cu(Ⅱ) and MB (methylene blue) were 3, 2, 6 and 12 with a saturated adsorption capacity of 87.53, 66.41, 351.03 and 286.54 mg/g, respectively. Pseudo-second-order was suitable to describe the adsorption kinetics of them and the adsorption isotherms were more consistent with the Langmuir isotherm model being a spontaneous, endothermic, and entropy-increasing process. In binary-polluted system, MCPS possessed simultaneous adsorption for Cr (Ⅵ)-MO and Cu(Ⅱ)-MB pollutants at their optimal pH, in addition, whether in anionic or cationic solution, the removal of heavy metals were promoted with the add of azo dyes but the removal of azo dyes were suppressed with the add of heavy metals. Both Cr (Ⅵ)-MO and Cu(Ⅱ)-MB pollutants could be effectively adsorbed and desorbed from MCPS by changing the pH of the aqueous solution to realize recyclability . Lastly, removal mechanism was revealed in detail by FT-IR, EDS and XPS .
研究领域:
环境科学
·
化学工程
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROANALYSIS
·
2020
·Vol. 32
·期 8
·1772-1779
·
IF 2.544
Yifei Yang,Yue Sun,Mingzhu Jin,Ru Bai,Yutong Liu,Yingqi Wu,Wei Wang,Xuewei Feng,Siyu Li
Superoxide dismutase (SOD) plays an important role in nearly all living cells. In this study, SOD imprinted poly(ionic liquid)s (SIPILs) were prepared on the surface of the bare Au electrode modified with nano-palladium and nano-gold (Au/nPd/nAu/SIPILs). SIPILs was synthesized with 1-vinyl-3-propyl imidazole sulfonate ionic liquids as functional monomers via electrochemically mediated atom transfer radical polymerization (eATRP) catalyzed by SOD. The Au/nPd/nAu/SIPILs was examined by cyclic voltammetry (CV), scanning electron microscope (SEM), energy-dispersive spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS). The Au/nPd/nAu/SIPILs was also used as an electrochemical sensor to determine SOD by differential pulse voltammetry (DPV). Under the optimal conditions, the detection range of SOD was from 1.0×10 −8 to 1.0×10 2 mg L −1 with a limit of detection of 8.90×10 −9 mg L −1 (S/N=3). Compared with other methods, the sensor based on SIPILs had the broader linear range and lower detection limit.
研究领域:
分析化学
·
材料科学
·
电化学
·
生物传感器
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2021
·
IF 3.498
Xiaoqing Xie,Yanfei Wang,Weini Zhou,Can Chen,Zeng Xiong
A new synthetic method was designed to prepare poly (trimesoyl chloride-co-polyethyleneimine) (PEI-TMC). Characterization of PEI-TMC was investigated by FTIR, SEM, EDS , XPS, TGA , and BET. TGA test revealed that the PEI-TMC had excellent thermal stability. The BET specific surface area (4.74 m 2 g −1 ) and pore diameter of about 9.44 nm indicated that PEI-TMC possessed a mesoporous structure. The adsorption behavior of U(VI) on the PEI-TMC was investigated. The thermodynamic analysis showed that the process of PEI-TMC adsorption of U(VI) was endothermic and spontaneous, and the adsorption efficiency was better at higher temperatures. The U(VI) sorption on PEI-TMC was conformed to the Langmuir adsorption isotherm and pseudo-second-order kinetic models . The adsorption mechanism of U(VI) with PEI-TMC was systematically elucidated by XPS and FTIR. Under the best condition, the maximum adsorption capacity of PEI-TMC could reach 212.8 mg g −1 by calculating the Langmuir isothermal model. It indicated that PEI-TMC was a potential adsorbent for the treatment of U(VI)-containing wastewater.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Jin Cheng,Lili Xing,Aijing Li,Xinpeng Chen,Jialuo Chen,Shenzhou Lu,Ning Qi,Guoqiang Chen,Tieling Xing
As a good substrate, silk fibers are widely employed in the field of intelligent textiles. In this work, the surface of silk fibers were firstly roughened by formic acid and sensitized by tannic acid, and then the silver ammonia solution was reduced by glucose to synthesize nano-silver in situ on the silk surface to obtain composite conductive silk fibers with resistivity as low as 0.24 mΩ·cm. It was proved by scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) tests that a uniformly deposited nano-silver layer was fabricated on the silk surface. The prepared silk fibers had stable mechanical, thermal, electrical, and antibacterial properties and can be used for human sensing.
研究领域:
纺织工程
·
材料科学
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Medical Sciences
·
2020
·
IF 2.523
Ke Li,Wenhua Zhan,Min Jia,Yufeng Zhao,Yingguang Liu,Rajiv Kumar Jha,Liansuo Zhou
Background : Combination chemotherapy plays an important role in the clinical therapy of non-small cell lung cancer (NSCLC). However, the pharmacokinetic differences between drugs are an insurmountable barrier in traditional treatment. For the synergistic therapy of NSCLC, synergistic nanoparticles (EDS NPs) loaded with both an EGFR inhibitor and doxorubicin (DOX) were designed and prepared. Methods : Erlotinib, apatinib and icotinib were evaluated for optimal combination with DOX in treatment of NSCLC via CCK-8 assay. Then the cationic amphipathic starch (CSaSt) and hyaluronic acid (HA) were applied to coencapsulate DOX and EGFR inhibitor to form the EDS NPs. EDS NPs were evaluated in NSCLC cell lines (A549, NCI-H1975 and PC9) and NSCLC xenograft mouse models. Results : Icotinib was found to be the optimal synergistic drug in combination with DOX in the tested. Subsequently, icotinib and DOX were coencapsulated in the NPs. EDS NPs were roughly spherical with an average size of 65.7±6.2 nm and possessed stable loading and releasing properties. In the in vitro investigation, EDS NPs could efficiently deliver payloads into cells, exhibited cytotoxicity and produced strong anti-migration properties. In vivo hypotoxicity was confirmed by acute toxicity and hemolytic assays. The in vivo distribution showed that EDS NPs could enhance accumulation in tumors and decrease nonspecific accumulation in normal organs. EDS NPs significantly promoted the in vivo synergistic effects of icotinib and DOX in the mouse model. Conclusions : The study suggests that EDS NPs possess noteworthy potential for development as therapeutics for NSCLC clinical chemotherapy.
研究领域:
肿瘤学
·
药学
·
纳米技术
·
癌症研究
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2017
·Vol. 5
·期 13
·3264-3275
·
IF 5.256
Bei Zhao,Dingyi Shen,Jun Yang,Shanshan Hu,Xianju Zhou,Jianfeng Tang
Sr2ScF7:Ln3+ (Ln = Ce, Tb, Eu, Sm, Dy, Er, Tm, Ho and Yb) nanocrystals were firstly synthesized via a one-step hydrothermal route without employing any surfactants. The shape and size of the Sr2ScF7 nanocrystals could be readily tuned from nanorods with 120 nm length and 50 nm width to nanoparticles with a uniform diameter of 15 nm by doping 30% Ln3+ with a larger ionic radius. Furthermore, the influence of pH values, F− sources and different surfactants on the sizes and morphologies (including nanorods, quadrangular microplates, cubes and polyhedrons) of the as-prepared products was systematically investigated and the possible formation mechanism for the products has been proposed. The XRD, SEM, EDS, PL analysis and decay lifetimes were used to characterize the products. For DC photoluminescence, the Sr2ScF7:Ln3+ nanocrystals show the characteristic f–f transitions with emission colors of bluish violet (Ce3+, Tm3+), green (Tb3+, Er3+, Ho3+), blue (Dy3+) and orange (Eu3+, Sm3+) respectively. Under single wavelength 980 nm excitation, the blue UC emissions of Sr2ScF7:Yb3+,Tm3+ nanocrystals at 474 nm due to the 1G4 → 3H6 transition of Tm3+, the green UC emissions of Sr2ScF7:Er3+ nanocrystals at 522/544 nm assigned to the 2H11/2 → 4I15/2/4S3/2 → 4I15/2 transitions and the red UC emissions of Sr2ScF7:Yb3+,Er3+ at 660 nm from 4F9/2 → 4I15/2 transition of Er3+ were observed. Based on the generation of red, green, and blue emissions, the Sr2ScF7:Yb3+,Er3+,Tm3+ nanocrystals could produce multicolor, particularly in the white region (0.320, 0.330) by controlling the doping concentration of Tm3+ in the Sr2ScF7:Yb3+,Er3+,Tm3+ nanocrystals. Controlling the doping concentration of Tm3+ is an effective way of modulating the luminescence properties of Sr2ScF7:Ln3+ by controlling its size and morphology. The as-synthesized phosphors might be potentially applied in the fields of color displays, light, photonics and biological imaging.
研究领域:
材料科学
·
纳米技术
·
光学
·
化学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED RADIATION AND ISOTOPES
·
2022
·
IF 1.787
Yunyun Bao,Yan Liu,Changfu Wang,Yun Wang,Dingzhong Yuan,Jianda Xu,Zuqing Zhu,Yan He,Jinbiao Liu
The adsorption and recovery of uranium from wastewater is of positive significance to the development of nuclear industry and environmental remediation. The ternary polymer (PZS-co-TA) was prepared from hexachlorocyclotriphosphazene (HCCP), 4,4-sulfonyldiphenol (BPS) and tannic acid (TA) under ultrasonic . TAC was then obtained after carbonization under high temperature from PZS-co-TA. The structure and performance of TAC were analyzed using SEM , EDS, FT-IR, XRD, Raman, BET and TG. The adsorption capacity of TAC for uranium under different static adsorption conditions was investigated. The adsorption process was more consistent with pseudo-second-order model. The maximum adsorption capacity calculated by non-linear Langmuir model was 492.5 mg/g at pH 5.5. The thermodynamic values suggested that the adsorption process was spontaneous and endothermic. Moreover, after five cycles of adsorption-desorption tests, TAC remained effective at adsorbing uranium, implying the introducing of TA to the precursor (PZS-co-TA) could enhance the adsorption capacity for uranium.
研究领域:
环境科学
·
材料科学
·
核工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）