INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Shiping Song,Xinwen Zhou,Bing Yang,Jie Chen,Jingqing Xu,Ailin Tan,Qiyun Feng,Xingxing Miao,Yinghong Chen,Yeping Xie
Due to the outstanding flexibility and stress-to-electricity conversion characteristics, piezoelectric polymer devices are increasingly emerging as ideal power supply solutions for self-powered intelligent devices. In addition, achieving piezoelectric polar active crystals via conventional processing methods still remains challenging, thus severely constraining the output performance. Herein, we successfully developed a novel polyvinylidene fluoride (PVDF)/cetyltrimethylammonium bromide (CTAB) piezoelectric composite that achieves boosted piezoelectric performance and conversion efficiency through combining the intense shear force field of microinjection molding with the strong ion-dipole interaction. The mechanism underlying the influence of the macroscopic intense shear flow field and microscopic interface coupling on the crystal structure, crystal morphology, and electrical properties of the resulting PVDF composite was thoroughly investigated. The content of the obtained polar active crystals (β and γ) could achieve as high as 77.2% under the controlled conditions. The enhanced piezoelectric properties could reach an open-circuit voltage of 3.7 V and a short-circuit current of 131.5 nA, respectively, which were better than those of most reported piezoelectric materials. This work not only contributed a new route to induce the generation of polar crystals in piezoelectric polymers but also offered a promising approach for large-scale production of high-performance piezoelectric devices.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Qiheng Qin,Bohao Liu,Jinyong Hu,Yong Zhang
Moist-electric generators (MEGs) have garnered considerable research attention in electricity generation without additional mechanical energy. Nevertheless, their practical applications in humidity sensing are limited by intrinsic limitations, including constrained water diffusivity and insufficient water ionization efficiency, which are synergistically detrimental to the output voltage and response time of the MEGs. Facilitating the directional ion migration across the sensing film is a critical way for realizing highly sensitive self-powered humidity detection with rapid response ability. Enlightened by the electric field that can drive the directional ion migration, an electric-field-enhanced MEG (E-MEG)-based humidity sensor was designed, in which a sensing film was sandwiched between two different metal electrodes. Following the working principle of moisture-induced primary batteries, an internal electric field that aligned with the water diffusive orientation was generated across the sensing film, thereby promoting the humidity sensing performance of the MEG-based sensor. The proposed E-MEG-based humidity sensor achieved an increased output voltage (955.6 mV) and decreased response time (64 s) compared to the pristine MEG-based sensor (137.1 mV/242 s) under 89.2% relative humidity (RH). This work furnishes novel research perspectives for advancing applications of MEGs in humidity detection and illuminates an innovative development in self-powered humidity-sensing technology.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Lanlan Feng,Mingxin Guo,Gang Qin,Jia Yang,Qiang Chen
Hydrogel polymer electrolytes (HGEs) are attracting significant attention due to their potential in the development of flexible and safe supercapacitors (SCs). However, the development of flexible supercapacitors based on HGE still faces numerous challenges, including issues such as interfacial delamination between the HGE/electrode under extreme deformations, and drastic performance deterioration at low temperatures. Herein, a tough adhesive polyacrylamide/H3PO4 (PAM/H3PO4) HGE was facilely prepared, exhibiting excellent flexibility, adhesion, ionic conductivity, and freeze resistance, which ensured close contact between the HGE and the polyaniline (PANI)-modified carbon cloth (C/PANI) electrode, thereby achieving a sandwich-type flexible supercapacitor with extremely low interface connection resistance and ultradurable electrochemistry under extreme deformations and subzero temperatures. Specifically, the interfacial adhesion energy between the HGE/electrode could reach up to 364 J/m2 at 25 °C and maintain 269 J/m2 even after exposure to −40 °C. The SC exhibited the capacitance retention rates of 98.42% and 96.78% after bending and twisting at 180° for 100,000 cycles, respectively. More impressively, the SC retains the capacitance value of 94.88% after 5000 cycles of 180° bending at −40 °C. This study proposed a simple and potentially commercialized HGE without any complex synthesis for constructing a highly flexible SC with excellent electrochemical stability under extreme mechanical and environmental conditions, while emphasizing the critical role of the HGE/electrode interface in enhancing the SC’s durability.
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Zhijie Shang,Pan Xu,Meiling Yao,Kaifan He,Guoxuan Li,Xinxue Li
Synthesis of acrylamide-based polymers with excellent stability is crucial for oilfield applications. In this study, a novel modified silica nanoparticle (MSiO2) obtained by a two-step N-acylation reaction was used as a functional monomer to enhance the stability of poly(acrylic acid (AA)/2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS)/acrylamide (AM)) ternary polymer (NSPM). A novel poly(MSiO2/AA/AMPS/AM) quaternary copolymer (MSPM) was obtained in this manner. The microstructure of MSPM was characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). The rheological properties of the MSPM were investigated based on the apparent viscosity in different salinities, temperatures, and shear rates. The MSPM exhibited improved stability compared with NSPM when the MSiO2 content was within the range of 0.14–0.20 wt %. This enhancement may be associated with hydrogen-bond-mediated intermolecular associations and MSiO2-centered branched or locally cross-linked structures formed during polymerization. Furthermore, the application of MSPM to gelation experiment showed that the grafting of MSiO2 effectively improved the gel strength of the polymer and prolonged its gel stabilization time from 10 to 14 days. The results of molecular dynamics simulation (MDS) demonstrate that the addition of MSiO2 effectively enhances the interaction between water and MSPM gel, which explains the fact that MSiO2 can reduce the dehydration rate of the MSPM gel.
✓ 已验证
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Jingyi Wang,Nan Zhuang,Huijun Sun,Zhouguang Lin,Bing Wang,Xinchang Wang,Xiaohong Cui,Zhong Chen
Signal amplification by reversible exchange (SABRE), a parahydrogen-based hyperpolarization technique, stands out for its operational accessibility and exceptional sensitivity enhancement. However, the structure-dependent mechanisms underlying hyperpolarization efficiency remain elusive, hindering targeted optimization. Herein, we investigated the relationship between substrate structure and SABRE hyperpolarization efficiency by probing coordination thermodynamics between pyridine/pyrazine derivatives and iridium catalyst precursors using 1H NMR, 2D diffusion-ordered spectroscopy (DOSY), and T1 relaxation measurements. We found that substrates exhibiting large coordination equilibrium constants (Keq) and decreased self-diffusion coefficients upon ligation to the catalyst generally showed higher signal enhancement. Further hyperpolarization on a mixture of four pyridine derivatives confirmed a direct correlation between signal enhancement and Keq magnitudes, i.e., the higher the Keq, the stronger the SABRE enhancement. Furthermore, the rapid spin relaxation of the substrate, as evidenced by shortened T1 values upon ligation to the Ir catalyst, contributed to suboptimal hyperpolarization performance. These findings provide useful experimental insight into substrate-dependent SABRE performance by revealing the combined roles of substrate coordination to the catalyst precursor and relaxation-mediated polarization retention.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Catalysis
·
2026
·
IF 13.6
Chenkun Zheng,Jianan Li,Dong Zhang,Yi Liu,Yin Wang,Xiaodi Wang,Yun-Xiang Pan,Chong Peng
Coupling the hydrogen evolution reaction (HER) with PET-derived ethylene glycol oxidation reaction (EGOR) offers an energy-saving route for hydrogen production and plastic upcycling. However, Pt-based bifunctional catalysts are limited by inefficient Pt utilization, nonideal H* adsorption, and anodic oxidation-induced deactivation. Here, we report an oxygen-deficient D-Pt-Ni(OH)2/NF catalyst prepared by dielectric barrier discharge plasma treatment and integrated with an alternating-pulse electrolysis strategy. Plasma treatment introduces abundant oxygen vacancies and promotes electron transfer from Ni to Pt, downshifting the Pt d-band center and optimizing H* adsorption. The optimized catalyst requires only 12 mV to reach 10 mA cm–2 for HER and delivers a Pt mass activity of 3.23 A mg–1Pt at –0.1 V vs RHE, which is 64.6 and 1.68 times higher than those of Pt/C and untreated Pt-Ni(OH)2/NF, respectively. In an HER||EGOR electrolyzer, D-Pt-Ni(OH)2/NF achieves 100 mA cm–2 at 0.96 V using PET hydrolysate. Alternating-pulse electrolysis suppresses Pt oxidation and enables stable 100 h operation in a membrane-free flow electrolyzer, with >90% Faradaic efficiency for glycolic acid and nearly 100% Faradaic efficiency for H2. Techno-economic analysis indicates a net profit of $1080.1 per ton of PET processed. This work demonstrates a catalyst–electrolysis co-engineering strategy that links plasma-induced electronic modulation with durable plastic valorization-assisted hydrogen production.
✓ 已验证
DOI
高影响因子
ACS ES&T Engineering
·
2026
·
IF 6.3
Zhenyu Gu,Jianhai Lu,Huimin Xu,Yemin Zhao,Shan Gao,Qiguang Dai,Xiaole Weng,Zhongbiao Wu
A novel Fe-doped ZSM-5 nanosphere catalyst was synthesized via a complex-assisted dynamic two-stage hydrothermal method using Na2EDTA as a chelating agent, followed by calcination under an inert atmosphere. The resulting material (Fe-ZSM-5EDTA-Ar) featured a hierarchical spherical architecture assembled from nanorods, possessing a high surface area (up to 511 m2/g), hierarchical porosity, and uniform dispersion of Fe species within the zeolite framework. Structural and spectroscopic analyses confirmed the successful isomorphous substitution of Fe2+/Fe3+ with a high proportion into the framework of ZSM-5, which concurrently enhanced structural stability and effectively suppressed iron leaching. Fe-ZSM-5EDTA-Ar demonstrated exceptional efficacy in the heterogeneous Fenton degradation of chlorobenzene (CB) employing H2O2 as the oxidant. This catalyst uniquely integrated high adsorption affinity with outstanding catalytic activity, resulting in complete dechlorination elimination of the target pollutant under optimized reaction conditions. Quenching experiments and electron paramagnetic resonance (EPR) collectively demonstrated that hydroxyl radicals were the dominant reactive oxygen species, driving the degradation process. Furthermore, Fe-ZSM-5EDTA-Ar also exhibited excellent recyclability in multiple cycles with negligible activity and iron loss. This work provides a robust synthesis strategy for designing stable and efficient zeolite-based Fenton catalysts for the remediation of chlorinated organic wastewater.
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2026
·
IF 12.2
Ze-Wei Ke,Yu-Xin Liu,Ying-Le Wan,Yu-Chao Li
The widespread presence of per- and polyfluoroalkyl substances (PFAS) at industrial and military sites threatens subsurface environments and human health. Conventional barrier materials, such as those used in cutoff walls and compacted clay liners, retain PFAS poorly due to their low adsorption affinity. To address this, we engineered a robust functionalized clay (DMOAP-Kao) by covalently grafting dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium onto kaolinite. This grafting strategy ensures superior stability compared to modification by cation exchange. The resulting DMOAP-Kao exhibited a high PFAS adsorption capacity and sustained strong adsorption performance under various aqueous chemistry conditions. Permeation tests further confirmed that incorporating DMOAP-Kao as an amendment into soil-bentonite barrier materials enhances PFAS retardation performance. Molecular dynamics simulations identified three distinct PFAS adsorption morphologies, corresponding to their binding with the outer organosilane shell, the inner organosilane shell, and the kaolinite surface. Free energy calculations revealed a three-stage adsorption process synergistically governed by electrostatic attraction and hydrophobic interactions. The positively charged quaternary ammonium groups of the grafted DMOAP enable long-range electrostatic attraction, effectively “capturing” anionic PFAS species from water and drawing them toward the modified clay surface for subsequent binding. This study establishes a conceptual framework for designing high-affinity clay adsorbents by selecting functionalized organosilanes based on the specific physicochemical properties of target contaminants and grafting them via condensation with the hydroxyl groups on clay surfaces and edges.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Catalysis
·
2026
·
IF 13.6
Guozhen Fang,Dantong Zhang,Xinyu Tong,Minghua Xu,Chunsheng Ding,Depeng Meng,Haiyan Zhang,Jing Leng,Dian Zhang,Lei Zhang,Kun Qi,Xiaowen Ruan,Xiaoqiang Cui
Amorphous cocatalysts effectively enhance the photoelectrochemical (PEC) water oxidation performance of BiVO4 (BVO). Nonetheless, their ability to extract photogenerated holes still suffers from limited efficiency and directionality. Here, we deliberately fabricate Ru single atoms immobilized on amorphous NiFeAl layered double hydroxide (NiFeAl-a) cocatalysts as a hole transport mediator and systematically elucidate the underlying promotion mechanism. Our investigations reveal that the formation of Ru−O hybridization states near the Fermi level augments the energy difference between BVO and NiFeAl-a. This modulation increases the band bending at their heterointerface, thereby facilitating hole extraction and suppressing the backflow of photogenerated electrons. These synergistic effects promote spatial charge separation. As a result, BVO/NiFeAl-a/Ru achieves a photocurrent density of 6.78 mA/cm2 at 1.23 V versus the reversible hydrogen electrode (vs RHE) and a half-cell applied bias photon-to-current efficiency of 2.63% at 0.61 V vs RHE. These values are higher than those of BVO/NiFeAl-a, which are 5.77 mA/cm2 and 2.20%, respectively. This work provides insights into the development of PEC systems for water oxidation.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2026
·
IF 5.8
Shansu Li,Xin Ye,Yingbo Guan,Rui Han,Yuan Liu,Qi Wang
The development of mobile communication technology and portable electronic devices inevitably leads to electromagnetic pollution. Constructing high-performance electromagnetic shielding materials with three-dimensional porous structures is an effective strategy to address this issue. Herein, composite melamine-formaldehyde (MF) foams with multilayer structures were developed via electrostatic self-assembly and cross-linking processes. In the synthesized composite foam, modified molybdenum disulfide (C-MoS2) and graphene (GP) that undergo electrostatic self-assembly are anchored to the foam skeleton via cross-linking of sodium alginate and calcium chloride, effectively preventing aggregation. Driven by interfacial polarization at the GP/C-MoS2 heterogeneous interfaces and conduction loss within the continuous network, the composite exhibits enhanced electromagnetic wave dissipation. In addition, the multilayered interface between GP and C-MoS2 nanosheets extends electromagnetic wave transmission paths via multiple reflections and scattering. The composite foam exhibits exceptional electromagnetic shielding performance, achieving an electromagnetic interference (EMI) shielding effectiveness (SE) of 49.6 dB and a specific shielding efficiency (SSE/t) exceeding 3500 dB cm2 g–1, complemented by an excellent compressive strength and thermal stability. This work demonstrates a viable strategy for designing multifunctional electromagnetic shielding materials.
✓ 已验证
DOI
高影响因子
ACS Applied Bio Materials
·
2026
·
IF 5.6
Ruitong Hou,Yuying Yu,Xuanyang Li,Tianzhen Ye,Zihao Tang,Fuyuan Tan,Yuanyou Yang,Jiali Liao,Ning Liu,Feize Li
It is imperative to optimize the therapeutic efficacy of anticancer medicine for translation from preclinical investigation to clinical practice. Typically, a single antitumor protocol usually cannot suppress tumor growth efficiently while sparing the side effects on normal organs or tissues. Here, we proposed a strategy combining radiopharmaceutical with photothermal therapy, which involved the construction of 131I-radiolabeled carbon quantum dots (131I-CQDs) with high photoactivity. The designed CQDs were well prepared and characterized, of which the photothermal capacity was demonstrated through a comprehensive evaluation in vitro and in vivo. More interestingly, 131I, a pivotal therapeutic radionuclide in biomedicine, can be conjugated with CQDs with high radiochemical yield, and the prepared 131I-CQDs can keep approximately 75% radiochemical encapsulation in different physiological media after a week. 131I-CQDs exhibit high cancer cell binding affinity, good endocytosis, and low efflux on 4T1 cells, demonstrating enhanced therapeutic effects in cell viability assays. In animal models, 131I-CQDs have manifested synergistic anticancer potential from radionuclide and photothermal therapy, capable of impeding cancer growth and prolonging survival of murine tumor-bearing models. The outcomes of this study suggest that CQD-derived platforms can combine photothermal and 131I radionuclide oncotherapy, providing an alternative avenue to promoting the application of nanoscale materials in anticancer fields.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Physical Chemistry C
·
2026
·
IF 3.4
Jing-Jing Li,Can-Jun Zou,Wei Tang,Cheng-Yu Zhang,Jian-Hua Jia,Ping-Ping Fang
The detection of purine drugs has been a persistent concern among scientists in the biology and medicine fields over the past few decades. However, achieving both high sensitivity and selectivity in the detection of purine drugs sharing similar molecular structures remains a significant challenge. Herein, we achieve both high detection sensitivity and selectivity for purine drugs with similar structure on the Gold/Materials of Institut Lavoisier-101(Au/MIL-101) composite by surface-enhanced Raman scattering (SERS). In water solution, the detection sensitivity for adenine (Ade) is as low as 1 ng·mL–1. Importantly, in serum containing Ade, 6-mercaptopurine, and allopurinol, Ade can be selectively detected with a detection limit of 3 ng·mL–1, indicating excellent anti-interference capability and practical application potential. Such high detection sensitivity is attributed to the specific adsorption between the amino group of the Ade and the carboxyl groups of the Materials Institut Lavoisier-101(Cr) (MIL-101(Cr)). This work provides a strategy for detecting structurally similar drugs and illustrates the potential use of functionalized SERS substrates in pharmaceutical analysis and therapeutic drug monitoring.
✓ 已验证
DOI
高影响因子