Journal of Future Foods
·
2026
·
IF 7.2
Xiaobo Zhang,Zekun Long,Wei Wang,Yafeng Jiang,Qiuyue Zheng,Jijuan Cao
Aflatoxin B1 (AFB1), the most toxic mycotoxin among aflatoxin family, which presents a risk to food safety and human health at a trace level. Herein, the self-enhanced electrochemiluminescence (ECL) emitters of Au nanoclusters-anchored g-C 3 N 4 nanosheet (Au NCs@g-C 3 N 4 ) were synthesized, in which the Au NCs as a co-reaction accelerator enhanced the ECL stability and intensity. Integrating with CRISPR/Cas12a system, the Au NCs@g-C 3 N 4 behaved as sensing substrate to construct a “off-on” switch-type ECL sensor for AFB1 detection based on ECL resonance energy transfer (ECL-RET). The presence of targets AFB1 can specifically bind its aptamer to trigger the release of the activator. Using dual aptamer-regulated activation of CRISPR-Cas12a, AFB1 can be quantified via the ECL sensor, displaying a wide detection range from 0.2 pg/mL-100 ng/mL and a detection limit of 0.08 pg/mL. Furthermore, good practicability was verified in real samples assay, providing an efficient tool for the early warning of AFB1 pollution.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Jie Bai,Yongchun Huang,Yuling Zhao,Lirong Zhang,Fuli Zhu,Yixizhuoma,Yuxin Weng,Shoude Zhang
The structural characterization of polysaccharides requires precise determination of their monosaccharide composition, including the differentiation of D- and L-configurations. Current analytical methods can identify monosaccharide types but often fail to distinguish between enantiomeric configurations, posing a significant challenge for accurate polysaccharide structural elucidation. This study introduces a robust, accurate, and reproducible ultra-performance liquid chromatography-electrospray ionization-tandem mass spectrometry (UPLC-ESI-MS/MS) method to address this limitation. By utilizing ( S )-(−)-1-phenylethylamine (S-PEA) as a chiral derivatizing reagent, monosaccharide enantiomers are converted into diastereomers through the introduction of a new chiral center. This approach enables the simultaneous determination of D/L configurations for aldoses, amino sugars, alditols, and uronic acids, achieving excellent chromatographic baseline separation. Method validation demonstrated excellent linearity (R 2 > 0.9900) within the range of 2.5–160 μg/mL. The limits of detection (LOD) and quantification (LOQ) ranged from 0.04 to 0.11 μg/mL and 0.13–0.35 μg/mL, respectively, indicating high sensitivity. Accuracy was confirmed with recovery rates between 97.23% and 100.67%, while intra- and inter-day precision RSDs were below 3.54%. The method was successfully applied to characterize the monosaccharide composition of six plant-derived polysaccharides, demonstrating its efficacy in identifying both structural types and absolute configurations. These findings establish the proposed method as a valuable tool for advancing the comprehensive structural analysis of polysaccharides.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Chengwei Jiang,Yiqi Xu,Chunfang Zi,Mengwei Tao,Quanshou Feng,Changxiang Hao,Ziyan Yu,Sijin Li,Fangyuan Sun,Haibo Wu,Yuanxin Yan,Liyang Wang,Yanqing Tian
Enhancing interfacial compatibility of gallium‑indium liquid metals (LM) with carbon-based fillers is critical for high-performance thermal interface materials with multifunctional capabilities. This study introduces a dual-step methodology combining polydopamine-mediated silver plating and solvent volatilization-mediated dispersion to fabricate paste-like conductive composites. Silver-plated carbon fibers (CF@PDA@Ag, CPA) are prepared via polydopamine surface modification for robust metallurgical bonding, followed by controlled solvent evaporation for uniform CPA integration into the LM matrix. These interactions transform rheological properties, imparting paste-like ductility. The LM/CPA (LCPA) composite exhibits exceptional performance: thermal conductivity of 127 W/m −1 K −1 , electrical conductivity of 1 × 10 6 S m −1 , and electromagnetic interference shielding of 71.5 dB at 100 μm thickness. Tailored rheology enables direct printing and adaptability to various geometries. In thermal management, LCPA-4 composites reduce operating temperatures by 53.9 °C (from 105.2 °C to 51.3 °C), outperforming commercial gaskets (reducing to 80.9 °C). Additionally, integration into thermal energy reclamation systems converts waste heat into stable electrical output (2.83 V), shifting from thermal management to energy harvesting. This work presents a viable materials solution for high-power electronic thermal management while advancing the practical deployment of multifunctional LM composites in energy recovery applications.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Wanyu Li,Muzi Liu,Xiangyu Xin,Yu Xiao,Jinping Li,Guang Liu
MgH 2 is recognized as an exceptionally promising solid-state material for hydrogen storage, but its high thermodynamic stability, slow kinetics, and cycling-induced particle coarsening remain major obstacles to practical application. In this study, a composite oxide catalyst, Nb 2 O 5 @TiO 2 -C, was synthesized via a hydrothermal route by loading nano-Nb 2 O 5 onto a TiO 2 -C support derived from a Ti-based metal- organic framework. Doping with Nb 2 O 5 @TiO 2 -C markedly enhances the hydrogen storage performance of MgH 2 . Carbon within the support effectively suppresses nanoparticle agglomeration, while the catalyst is partially reduced to low-valence species during de/rehydrogenation cycles, both contributing to the enhanced performance. The MgH 2 -7 wt.% Nb 2 O 5 @TiO 2 -C composite starts dehydrogenating at 210.6 °C. At 300 °C, it rapidly releases over 6 wt% hydrogen within 5 min. The dehydrogenated sample also exhibits fast absorption kinetics, absorbing 6 wt% hydrogen within 1 min at 200 °C under 30 bar H 2 . Moreover, the system shows excellent cycling stability, retaining a hydrogen capacity of 6.6 wt% after 20 cycles.
✓ 已验证
产品关联
DOI
高影响因子
Nature Photonics
·
2026
·
IF 32.9
Cao Wei,Tian Sen,Zhong Chao,Qiu Li,Zeng Pan,Chen Zhiming,Zhang Xiancheng,Liu Haitao,Liu Kaitao,Li Jian,Sun Tao,Ning Pingfan,Zhang Delin,Wang Wenhong,Jiang Yong,Cao An,Li Liang,Liu Dilong,Nie Zhihong,Yang Fan,Li Fushan,Li Yue
High pixel resolution is critical for next-generation quantum-dot light-emitting diode (QLED) display technologies. Although advances in quantum-dot patterning have improved resolution, the reduction in pixel size often degrades emission efficiency and pattern uniformity. Here we develop a nanoimprint strategy using nanohole-array moulds to fabricate nano-QLEDs via capillary action-induced self-assembly of quantum dots. We realize pixels as small as sub-100 nm with ultrahigh pixel resolution up to 169,333 pixels per inch over an electroluminescent area of 4 mm 2 . Benefiting from the closely packed light-emitting quantum-dot monolayers, our nano-QLEDs show minimal performance degradation upon reducing the pixel size. Notably, the smallest red, green and blue nano-QLEDs maintain average external quantum efficiencies of 17.0%, 10.5% and 5.7%, respectively. We also demonstrate fabrication on flexible substrates as well as an active-matrix display by imprinting micro-QLEDs on a thin-film-transistor backplane, showing images and videos with a resolution of 100 pixels × 180 pixels. This work provides a powerful method for fabricating ultrahigh-resolution nano-QLED arrays with high external quantum efficiency for next-generation displays.
✓ 已验证
产品关联
DOI
高影响因子
BIOMATERIALS
·
2026
·
IF 13.6
Jinwu Wang,Chao Lou,Zhihao Shen,Jin Yang,Hongyi Jiang,Heng Yu,Yu Zhang,Yangbo Li,Hua Chen,Aimin Wu,Zengjie Zhang,Leyi Cai,Wenhao Zheng
Osteoarthritis (OA) progression is driven by persistent oxidative stress and ferroptosis, which erode chondrocyte viability and extracellular matrix integrity. Although mesenchymal stem cell–derived exosomes (MSC-EXO) hold regenerative promise, their native cargo lacks the adaptability to withstand such a hostile microenvironment, limiting therapeutic efficacy. Here, we demonstrated a synergistic strategy involving reverse-adaptation and engineered MSC exosomes against ferroptosis in osteoarthritis. Firstly, the reverse-adaptation strategy in which OA-like oxidative stress was harnessed to precondition MSCs, thereby identifying miR-142a-3p as a key therapeutic mediator in tert -butyl hydroperoxide (TBHP)-modified exosomes (T-EXO). Subsequently, we engineered MSC-derived exosomes via miR-142a-3p electroporation (EXO miR−142a−3p ) with unique anti-ferroptosis and antioxidative properties. EXO miR−142a−3p were markedly enriched with miR-142a-3p, which directly targeted the GSK3β/Nrf2/SLC7A11 axis to suppress ferroptosis and reactive oxygen species (ROS) accumulation. Compared to naive EXO, EXO miR−142a−3p exhibited superior protection against cartilage matrix degradation and significantly slowed OA progression in a murine model. By integrating these engineered exosomes into a biodegradable, cartilage-targeted, and lubricious microsphere platform, we achieved sustained, site-specific delivery that amplified therapeutic durability and efficacy. This platform robustly mitigated extracellular matrix (ECM) degradation, ferroptosis, and oxidative stress in vitro, and conferred significant cartilage protection in a destabilization of medial meniscus (DMM)-induced OA model via efficient, prolonged intra-articular release. Collectively, this innovative approach not only provides potent cartilage protection in preclinical models but also establishes a paradigm for precision, microenvironment-adaptive regenerative therapies for OA and other degenerative diseases.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Energy Storage
·
2026
·
IF 9.8
Yupeng Li,Gengwei Li,Xiping Lei,Ting Yu
NiSe₂ is considered a promising electrode material due to its high theoretical specific capacity and favorable redox activity; however, its practical application is limited by poor electrical conductivity and structural instability during cycling. To overcome these limitations, a sacrificial template method was employed using Ni@C/MoS₂ as the precursor to successfully construct a series of NiSe₂@C/MoS₂ composites with varying selenization degrees. The resulting hierarchical structure exhibits excellent stability and efficiency: the carbon framework significantly enhances electron transport, while MoS₂ not only contributes additional pseudocapacitance but also synergistically improves ion diffusion efficiency. Furthermore, selenium doping effectively modulates the electronic structure and active sites, leading to optimized electrochemical performance. Systematic investigations reveal that when 2 mmol of selenium source is added, the obtained NiSe 2 @C/MoS₂-2 (denoted as NSC/MoS₂-2) electrode achieves an exceptional specific capacitance of 562.3C g −1 (1405.8 F g −1 ) at 1 A g −1 and maintains 82.7 % capacitance retention at 10 A g −1 . An asymmetric supercapacitor assembled with NSC/MoS₂-2 as the positive electrode and activated carbon as the negative electrode delivers a high energy density of 36.37 Wh/kg at a power density of 700 W/kg. This work innovatively demonstrates that precise control of the selenization degree enables the controllable growth of hierarchical NiSe₂ nanoflowers on an MOF-derived carbon framework while establishing strongly coupled heterogeneous interfaces with layered MoS₂. This integrated design markedly improves the structural stability and electrical conductivity of NiSe₂, while fully harnessing the multiple synergistic effects among NiSe₂, MoS₂, and the carbon matrix, thereby delivering comprehensive breakthroughs in specific capacity, superior rate capability, and long-term cycling stability. The strategy offers a new paradigm for the rational construction of high-performance transition metal selenide-based supercapacitor electrodes.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Ruizhe Zhang,Hui Liu,Keke Li,Qinghua Liu,Ziqi Liu,Menglin Zhu,Ying Zhang,Pu Feng,Jinmei He,Mengnan Qu
As a novel electronic device for harvesting ambient mechanical energy, triboelectric nanogenerators (TENGs) have attracted extensive attention in the fields of energy harvesting and wearable sensing. Herein, by optimizing the doping concentration of nano-piezoelectric particles, a multifunctional dual-doped hybrid conductive carbon aerogel (DHCA) with great mechanical and electrical properties was fabricated, which features a porous 3D networked conductive structure. By utilizing polytetrafluoroethylene (PTFE) as the negative triboelectric layer and DHCA as the positive triboelectric layer integrated with electrode, DHCA-TENG was ingeniously constructed. Benefiting from the synergistic effects of solid-solid (PTFE-DHCA), solid-gas (DHCA-air), and piezoelectric effects, the DHCA-TENG has an open-circuit voltage of 372.35 V, short-circuit current of 18.72 μA, and short-circuit charge transfer of 115.19 nC, which is superior to most of the literature-reported results under similar conditions. Moreover, the prepared DHCA has piezoresistive sensing capabilities and can also be used to monitor different human movement signals, with a rapid response time of 107 ms. Overall, compared with traditional functional triboelectric layer materials, DHCA has the advantages of a simple structure, high physical and electrical properties, and multiple functions. Based on its high sensitivity, DHCA sensors enable multi-dimensional motion scenario detection for both human movement and venue boundary detection, thus offering a novel approach in these detection fields.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Energy
·
2026
·
IF 8.6
Yakai Hao,Mingqiu Bao,Huijin Chen,Yuchuan Zhu,Ruoxi Yang,Ruirui Yue,Jinbing Shu,Jingkun Xu
Catalysts with high-efficient performance, high durability and low cost are still urgently needed to promote the wide application of direct alcohol fuel cells (DAFCs). This work prepared a PdNi/PPy composite by dispersing Ni-doped Pd nanoparticles on coarse polypyrrole (PPy) granules via facile interfacial redox and polymerization. The optimized PdNi/PPy composite possesses a porous morphology and uniform dispersion, which are key for achieving performance synergistic optimization in alcohol oxidation reactions (AORs). Specifically, for ethylene glycol oxidation (EGOR), the PdNi/PPy achieves mass activity (MA, 5577.2 mA mg Pd −1 ), specific activity (SA, 32.3 mA cm −2 ), and intrinsic activity (TOF, 6.8 s −1 ), which are 7.9, 3.0 and 2.7 times those of commercial Pd/C, respectively. It also exhibits higher activity for ethanol and methanol oxidation compared to other catalysts. Characterizations demonstrate that the synergy between Ni-doped Pd and conductive PPy significantly enhances catalytic properties. The electronic structure of Pd is optimized via Ni-doping induced d-band center modulation and efficient interfacial charge transfer through heterojunction formation. Additionally, the PPy support facilitates uniform dispersion and maximizes active site exposure. This work can offer meaningful insights for the development of advanced anode catalysts by effective doping of active metals and further strengthening of the carrier effects for DAFCs.
✓ 已验证
产品关联
DOI
高影响因子
npj Biofilms and Microbiomes
·
2026
·
IF 9.2
Zhou Xinghong,Liu Xiaoyu,Peng Baizhao,Yang Ying,Lu Hanqi,Li Dexian,Deng Yijian,Jiang Zihao,Wu Chuanghai,Fang Wen,You Yanting,Kwan Hiu Yee,Zhao Xiaoshan,Liu Yanyan
Renal injury is a common complication of hyperuricemia (HUA), which has been recognized as an independent risk factor for chronic kidney disease (CKD). The gut-kidney axis theory suggests that targeting the gut microbiota may be a potential treatment option for kidney disease. In this study, we utilized a spontaneous HUA rat model to demonstrate that Simiao decoction (SMD), a traditional Chinese medicine formula, can effectively alleviate HUA-induced renal injury by modulating gut microbiota and bacterial metabolism of tryptophan and tyrosine, thereby reducing gut-derived uremic toxins such as indoxyl sulfate (IS) and p-Cresol (PC). Fecal microbiota transplantation (FMT) further confirmed that the therapeutic effect of SMD was mediated by gut microbiota. Finally, in vitro studies revealed that IS promotes epithelial-mesenchymal transition (EMT) while PC induces cellular senescence in tubular cells. Collectively, our findings suggest that SMD can effectively alleviate HUA-induced renal injury through regulating gut dysbiosis and decreasing gut-derived uremic toxins. This study sheds light on a novel mechanism by which SMD exerts its effects on HUA-induced renal injury.
✓ 已验证
DOI
PubMed
高影响因子
TOXICOLOGY LETTERS
·
2026
·
IF 3.1
Tianyi Chen,Fengjun Fan,An Cheng,Yumei Xia,Haoze Chen,Jiakai Fang,Yangyu Chen,Tianjia Li,Anli Wang,Binjie Wang,Weixuan Yao,Yuanzhao Wu
Flocoumafen (FCF), a second-generation anticoagulant rodenticide (SGAR), has limited toxicological data regarding its effects on aquatic organisms. In this study, we exposed zebrafish embryos to FCF solutions at concentrations of 0.2, 0.4, and 0.8 mg/L until 120 h post-fertilization (hpf). The results revealed a decrease in survival rates. Notably, FCF exposure significantly reduced the frequency of spontaneous tail coils at 24 hpf, while shortened body length and induced spinal curvature at 120 hpf. Furthermore, zebrafish larvae exhibited craniofacial abnormalities and incomplete bone mineralization at 120 hpf following FCF exposure. In Tg( HuC:EGFP ) transgenic strains, neuronal loss was observed. Additionally, FCF-exposed zebrafish larvae showed a marked reduction in locomotor ability, activity levels, and turning capacity. The qPCR and enzyme activity assays revealed significant changes in gene expression associated with the Notch signaling pathway, accompanied by increased levels of reactive oxygen species (ROS), superoxide dismutase (SOD), catalase (CAT), malondialdehyde (MDA). Astaxanthin (ASTA) partially alleviated the toxicities induced by FCF. These findings suggest that FCF may induce skeletal and neurological toxicities by affecting oxidative stress, disrupting the normal expression of skeletal and nervous system-related genes in the Notch signaling pathway, and ultimately leading to behavioral abnormalities. Our findings may provide new insights into a comprehensive evaluation of FCF toxicology in aquatic organisms, and may assist the government in formulating and implementing regulatory policies regarding the application of FCF.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Energy Storage
·
2026
·
IF 9.8
Yaqian Dong,Shuyu Yue,Tiehua Ma,Yaohui Zhang
The development of efficient and stable oxygen reduction reaction (ORR) catalysts is critical for advancing sustainable energy technologies, particularly rechargeable zinc-air batteries (ZABs) which offer high theoretical energy density, inherent safety, and cost-effectiveness compared to other metal-air systems. However, the widespread application of ZABs is hindered by the sluggish kinetics of the air cathode ORR, and state-of-the-art Pt-based catalysts suffer from high cost, susceptibility to poisoning, and inadequate durability in neutral media. To address this challenge, non-precious metal catalysts represented by metal‑nitrogen‑carbon dopants have attracted significant attention due to their geometrically constrained coordination environments that resist hydrolytic dissociation and electronic structures capable of circumventing specific adsorption poisoning pathways. Herein, we report a molecularly engineered manganese single-atom catalyst (MnNC-0.5) synthesized via a cyano-amino coordination strategy coupled with MgO-templated pyrolysis. This approach creates well-defined Mn N 4 sites adjacent to -CN functional groups within a hierarchical porous carbon matrix. The catalyst exhibits exceptional ORR activity across the entire pH spectrum, with half-wave potentials of 0.89 V in 0.1 M KOH, 0.77 V in 0.5 M H 2 SO 4 , and 0.69 V in 0.1 M PBS. It also demonstrates remarkable stability, retaining over 90% of its initial current after 35,000 s of continuous operation. Density functional theory (DFT) calculations reveal that the adjacent -CN group electronically modulates the Mn N 4 center, optimizing the adsorption free energy of oxygen intermediates and thereby enhancing the intrinsic activity. When employed as an air cathode in a liquid ZAB, the MnNC-0.5-based device achieves a peak power density of 193.4 mW cm −2 and a high specific energy density of 1094 Wh kg Zn −1 , outperforming the Pt/C benchmark. This work provides a viable molecular-engineering strategy for designing high-performance, pH-universal ORR electrocatalysts for next-generation energy conversion and storage devices.
✓ 已验证
产品关联
DOI
高影响因子