ACS Nano
·
2026
·
IF 17.3
Di Zhao,Chengcheng Chi,Xiao Han,Kesong Liu,Lei Jiang,Liping Heng
High-speed continuous fluids transport within enclosed pipelines is a core driving technology in biomedicine, chemical analysis, and soft robotics. However, conventional pumping technologies rely on bulky compressors that suffer from excessive power consumption (>3 × 107 W), high noise (>60 dB), and considerable weight (>2 kg). Although emerging liquid metal (LM)-based micropumps offer silent and portable alternatives, the inherent clogging of chambers by deformed LM restricts operation to the high frequency (>100 Hz) and low duty cycle (<50%) of the electrical signal, inevitably leading to flow rate decay (<5000 μL min–1). Herein, we introduce a magnetic LM-based electro-magnetic fluid pump (mEMFP) that synergizes electric and magnetic fields for efficient liquid transport. By integrating core–shell Fe@PDA@Ag magnetic particles into LM, we generate magnetically responsive LM droplets (MLM) that can be precisely anchored within the pump chamber, thereby eliminating clogging. This design enables the operating frequency to be reduced to 10 Hz and the duty cycle to be increased to 80%, extending the effective actuation duration. Under 12 V square wave signal (12 Vp-p, 6 V DC offset), mEMFP equipped with a single MLM droplet achieves a flow rate of 1.59 × 104 μL min–1, while four serially integrated MLMs deliver 2.20 × 104 μL min–1 with power consumption below 20 mW. What’s more, the mEMFP is successfully demonstrated in versatile applications including multifunctional liquid transport, phase-change valving, and personalized thermal management, offering a feasible pathway toward high-performance microfluidic systems.
✓ 已验证
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY
·
2026
·
IF 4.6
Hengli Zhu,Kaipeng Tian,Jiaren Du,Ke Chen,Jianqi Qi,Kailei Lu,Hengwei Lin
Rare-earth-doped transparent ceramics, as novel luminescent materials, show broad application prospects in the field of advanced photonics. In this study, a series of Gd2Hf2O7:Yb3+,Er3+ transparent ceramics were prepared by controlling Yb3+ concentration via vacuum sintering. These ceramics exhibit a dense microstructure that effectively suppresses light scattering and nonradiative relaxation, enabling simultaneous visible light, near-infrared emission, and upconversion luminescence within a single ceramic system. The dual-mode emissions are attributed to the strong near-infrared absorption of Yb3+ ions, as well as the efficient Yb3+ → Er3+ energy transfer under 980 nm excitation and the presence of Er3+ → Yb3+ energy transfer under ultraviolet light. Furthermore, these ceramics exhibit superior environmental resilience and hydrophobic properties. Accelerated hydrothermal aging tests reveal negligible phase decomposition, minimal decay in near-infrared and upconversion luminescence, and significantly enhanced performance compared to commercial aluminate phosphors. This property stems from the inherent chemical stability and dense structure of the ceramics. Gd2Hf2O7-based dense transparent ceramics, characterized by dual-mode luminescence, high transmittance, and exceptional durability, hold promise in addressing the stability limitations and integration challenges in harsh environments and high-power optoelectronic devices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Yifan Yue,Baohe Wang,Aiping Wang,Fuying Zhao,Jing Zhu,Jing Ma
The catalytic efficiency for methyl methacrylate (MMA) production via aldol condensation of methyl propionate (MP) and formaldehyde (FA) depends on the acid–base and structural properties of the catalyst. Inspired by this, a synergistic design strategy is implemented by fabricating Cs/Al-MCM-41 catalysts, where Al doping preserves ordered mesopores and tunes acid–base properties. This approach generates an optimal density of medium acid sites together with a balanced distribution of weak-to-medium base sites, leading to 90% MMA selectivity and a space-time yield of 0.29 g/(gcat·h). Moreover, the mesoporous confinement not only enhances the dispersion of Cs active species but also suppresses the condensation of coke precursors, thereby significantly improving the catalyst stability. Density functional theory (DFT) calculations reveal that basic Cs–O–Si sites and acidic Al sites cooperatively activate MP and FA, promoting aldol condensation. This work demonstrates that the integration of targeted acid–base regulation with structural confinement provides a rational catalyst design principle for efficient aldol condensation.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Zhibo Luan,Jian Li,Yangwei Wang,Zhicheng Song,Wei Zhao,Qinghua Guan,Wen Zhao,Song Liu,Pengfei Du,Zhengtong Ning
For soft robotic systems to emulate the adaptive behaviors of natural organisms, integrated systems with both high compliance and multimodal sensing are essential. However, existing soft robotic designs often struggle to simultaneously achieve large deformability, high force output, and stable real-time multimodal perception. Here, we report a precompressed flexoskeleton soft actuator integrated with a self-powered flexible bimodal sensor for enhanced actuation and multimodal perception. The developed self-powered bimodal sensor enables the simultaneous detection of distance and pressure, thereby allowing soft robots to perceive both noncontact proximity information and contact stimuli with good operational stability and durability. To further support this sensing platform, a flexoskeleton derived from a trimmed spiral surface was incorporated into the actuator and assembled in a precompressed state, thereby constraining radial expansion and promoting deformation through the release of stored elastic energy. The actuator delivered a blocking force of 17.28 N at 70 kPa while maintaining a bending angle of 30.5°, and also supported multidirectional bending and modular assembly. The integrated bimodal sensor combines noncontact triboelectric proximity sensing with contact piezoelectric pressure sensing, enabling self-powered discrimination of approach and touch events. In the proximity sensing mode, the open-circuit voltage increases from 0.24 to 0.71 V as the distance decreases from 25 to 5 mm. In the pressure sensing mode, the device produces up to 5.98 V and 325 nA under an 80 N load, together with good operational durability. Benefiting from the synergistic integration of self-powered sensing and structural actuation, the system demonstrates adaptive interaction in serial manipulators, plant-inspired predatory grasping in parallel soft grippers, and programmable gait perception in tripedal soft robots. This work provides a feasible strategy for deeply integrating self-powered multimodal sensing with soft actuation and highlights the potential of functional sensing materials for intelligent soft robotic systems.
✓ 已验证
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY
·
2026
·
IF 4.6
Linkai Zhao,Jing Zhao,Jiaying Hu,Zhao Mo,Ziyi Wang,Zhaoli Xue,Lei Feng,Long Zhao
A typical dye-sensitized semiconductor system prefers a cascade electron transfer to gain efficient injection and to avoid charge recombination, whereas this design protocol might be an unfit photocatalysis domain since the radical species are no longer bare photoelectrons. To check the hypothesis, a zinc porphyrin sensitizer with the triphenyltriazine (TPTZ) substituent 3TPTZ-ZnP was designed, along with a triphenylamine (TPA) analogue 3TPA-ZnP for comparison. Density functional theory (DFT) calculations suggested that the TPTZ substituents on 3TPTZ-ZnP form a more planar structure with no significant coupling to the porphyrin core. When coated onto TiO2, enhanced light absorption was achieved by 3TPTZ-ZnP. This increased light-harvesting ability did not lead to a greater photocurrent of 3TPTZ-ZnP/TiO2 as compared to 3TPA-ZnP/TiO2, which is due to a competitive electron transfer pathway from the porphyrin to the TPTZ groups, besides the electron injection to TiO2. Nonetheless, 3TPTZ-ZnP/TiO2 exhibited superior photodegradation performance compared to 3TPA-ZnP/TiO2. This is attributed to the planar conjugated structure with more nitrogen content of TPTZ, which promotes π–π interactions with aromatic dyes and allows more superoxide radicals (•O2–) to be generated on the surface. Further experiments also confirmed that the main free radicals in the reaction were photogenerated holes (h+) and •O2–.
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Yichen Zou,Zikai Zhou,Jian Kang,Zhenwei Yuan,Dan Hou,Hualin Jiang,Jing Chen,Wanming Xiong
Six highly unsaturated diimidazole ionic liquids (ILs) were synthesized and applied to catalyze the condensation of furfural into furoin. The effects of solvents and reaction conditions on the reaction were also investigated. Results showed that the δH(C-2) chemical shift of the imidazolium ring could reflect the catalyst’s catalytic performance. CH2Cl2 facilitated the deprotonation of the ILs and product separation, leading to the highest furoin yield. While the presence of 10% acetone could enhance contact between the catalyst and furfural, thereby increasing the yield. RSM, ANN, and SVR demonstrated the reliability and accuracy of the experimental results. The kinetic calculation was consistent with the observed rapid completion of the reaction under mild conditions. What’s more, energy-level calculations revealed that the nucleophilic reaction with the second furfural molecule to form furoin constitutes the rate-determining step. This work is expected to provide valuable guidance for catalyst design and process optimization.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Jianing Chen,Zhuoqun Su,Jianghua Liu,Jingxia Chen,Yue Yang,Di Wu,Yuhan Shi,Cheng Zhou,Guoliang Li
Precise identification and structural elucidation of glycans have long been a challenge in analytical science. A clear understanding of their structure–function relationship is also crucial for revealing related biological activities. Although emerging nanopore technology has the potential to provide glycan fingerprints at the single-molecule level, direct detection remains significantly difficult due to limitations such as small size, insufficient charge, and efficient methods for nanopore events identification. To overcome these hurdles, we proposed a synergistic enhancement strategy that integrated charge modulation of glycans with the spatial confinement effect of the nanopore lumen. This innovation significantly strengthens the interactions between glycans and the nanopore, thereby amplifying the fingerprint signals of glycans with subtle structural differences. This method not only distinguished between glycan isomers but also enabled qualitative analysis and has been successfully validated in real samples. To further enhance the analytical objectivity, we employed a customized machine learning algorithm to automatically classify and identify translocation events, achieving an overall accuracy of over 97%. In conclusion, this study provides a novel single-molecule sensing perspective for glycan fingerprint analysis.
✓ 已验证
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Jiaxun Li,Lingling Guo,Xiaoling Wu,Maozhong Sun,Liguang Xu,Chuanlai Xu,Hua Kuang,Xinxin Xu
Plant-derived foods are a vital component of the human diet, but they pose health risks due to the potential presence of anthraquinones (AQs) and their derivatives, and long-term intake of these substances can lead to health issues. Therefore, there is an urgent need for a method to rapidly and simultaneously detect seven AQs, including AQ, emodin, rhein, chrysophanol, aloe emodin, alizarin, and purpurin. In this study, four haptens were designed based on the common parent nucleus structure of the seven AQs combined with computer-aided simulation analysis. MD was used to analyze the recognition mechanism between AQ mAb-4D7 and the seven AQs, revealing that key amino acid residues (TRP90, ASP99, and TYR31) in the complementarity-determining region of the antibody maintain broad-spectrum recognition of AQs through the combined effects of Pi–Pi stacking, hydrogen bonding, and hydrophobic interactions. Based on AQ mAb-4D7, gold nanoparticles based on lateral flow immunoassay (GNP-LFIA) was developed for detecting the seven AQs in tea, aloe vera, and herbal drinks, with calculated limits of detection of 7.282–34.112 μg/kg, 5.536–27.338 μg/kg, and 5.025–26.319 μg/kg, respectively. In real sample detection, the method exhibited high consistency with the results of liquid chromatography-tandem mass spectrometry confirming the accuracy and stability of GNP-LFIA and providing a reliable technical tool for the on-site rapid screening of multiple AQs in plant-derived foods.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Physical Chemistry Letters
·
2026
·
IF 4.5
Jiaxing Zhu,Qi Xiao,Renqiang Yang,Jiajun Luo,Jiang Tang
Tin-based perovskite light-emitting diodes (PeLEDs) have emerged as promising candidates for environmentally benign optoelectronic applications. However, their practical performance remains limited by severe interfacial defect states, particularly at the buried interface. In this work, we introduce a self-assembled monolayer (SAM) molecule [4-(3,6-dibromo-9H-carbazol-9-yl)butyl]phosphonic acid (Br-4P), combining NiOx to effectively mitigate interfacial defects for PEA2SnI4-based (PEA = phenethylammonium) pure-red PeLEDs. This SAM is meticulously designed with tailored dimensions to achieve interfacial structural synergy with PEA2SnI4, serving as a bridging component between NiOx and the perovskite. The insertion of Br-4P promotes superior crystallinity and more uniform crystal orientation, enables the passivation of undercoordinated Sn2+ species, and the phosphate group of Br-4P functions to anchor onto NiOx. As a result, the optimized PeLEDs achieved a peak external quantum efficiency of 6.19% at 623 nm with a narrow full width at half-maximum of 27 nm and a luminance of 226 cd·m–2. This work highlights the critical role of interface engineering in unlocking the potential of Sn-based perovskite emitters for high-efficiency, nontoxic light-emitting applications.
✓ 已验证
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Guangliang Wu,Wenjing Liu,Hao Dong,Jian-Ming Zhu,Jiangyi Zhang,Zhifang Xu
The standard addition method (SAM) determines sample isotope compositions from mixtures of samples and standards with known isotope ratios, which has been widely applicated for low-mass or low-concentration samples. However, conventional off-line SAM is labor-intensive and can suffer from substantial uncertainty (≥2.5%) in the sample proportion (f value) within the mixture, which compromises isotopic accuracy. Here we present a novel online SAM specifically designed to address these challenges. The reference gas routinely used in conventional analyses is innovatively repurposed as a standard and introduced online directly into the sample stream via the ConFlo IV interface. The isotope ratios of samples are subsequently calculated using an isotope mass balance model. The method is evaluated and validated by measuring the sulfur (S) isotope compositions of standard materials and natural samples using elemental analyzer isotope ratio mass spectrometry (EA-IRMS). The uncertainty in the f value is less than 0.148%, ensuring the accuracy of calculated results. The approach eliminates the need for manual standard addition, significantly enhancing measurement efficiency. The method achieves accuracy and reproducibility comparable to conventional techniques while reducing the sample mass by 75%. Based on the developed approach, coarse to ultrafine atmospheric particulate matter was successfully measured in a haze event, revealing size-dependent S isotope variations. Importantly, this methodology is highly practical and easy to be widely adopted for current standard equipped EA-IRMS laboratories, as it requires no additional labor and financial investments for hardware upgrading proposed in previous publications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Omega
·
2026
·
IF 5.2
Jin Guo,Hu Meng
The employment of profile control and water-shutoff agents in the context of high-temperature, low-permeability reservoirs has emerged as a pivotal strategy for augmenting oil recovery. However, the efficacy of reservoir modification is diminished by damage caused by low-temperature resistance and high filtration. The present study synthesized a profile-control agent (nanoscale) with the purpose of improving fluid flow in geological reservoirs. Furthermore, a multicoupled experimental apparatus was developed to evaluate the rheological, seepage, and plugging behaviors of geological fluids. In addition, a chemical kinetic model was established to elucidate the microscopic regulation mechanism of the profile-control and water-shutoff agent. The results demonstrated that the nanoscale chemical agent exhibited superior thermal stability compared with commercially available chemicals at 200 °C, while elevated reservoir pressure further enhanced its profile-control and water-shutoff performance. Moreover, the synthesized chemical agent showed lower filtration loss and reduced material adsorption relative to commercial products, thereby mitigating reservoir damage and improving reservoir recovery efficiency. This study provides fundamental theoretical and experimental support for energy extraction from high-temperature, low-permeability reservoirs.
✓ 已验证
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY
·
2026
·
IF 4.6
Yingfang Li,Long Tian,Hai Wu,Xiaohuan Long,Xu Wang,Chaoyong Deng,Weichao Huang
Fe3+-activated luminescent materials have recently evoked considerable interest owing to their environmentally friendly and versatile applications potential. In this study, novel Li2MgTi3O8: Fe3+ phosphors are synthesized and its luminescence properties were systematically investigated. The Li2MgTi3O8: Fe3+ phosphor exhibits a broad excitation spectrum covering the ultraviolet–visible region from 250 to 600 nm. Upon 417 nm excitation, the as-prepared phosphor shows a broad far-red emission band centered at 709 nm due to the 4T1 (4G) → 6A1 (6S) transition of Fe3+ ions, along with a good internal quantum efficiency (IQE) of 39%. Importantly, the emission band of phosphors can be well matched with the absorption spectra of plant pigments. Furthermore, the temperature sensing properties of the phosphor samples were analyzed by using the fluorescence intensity (FI) and fluorescence lifetime (FL) technique, achieving maximum relative sensitivities (Sr) of 1.73% K–1@423 K and 3.52% K–1@373 K, respectively. These results indicate that Li2MgTi3O8: Fe3+ phosphors have potential applications for optical thermometry and plant growth illumination.
✓ 已验证
DOI
PubMed
高影响因子