文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4933至4944个,产品总数347,550个

切换升序
ACS Applied Energy Materials · 2026 · IF 5.5

High-Strength Sulfonated Aramid Nanofiber Membranes for High-Efficiency Osmotic Energy Conversion

Liangliang Jin,Bo Dong,Zhenglei Hu,Yutang Zhang,Bochao Ye,Yangning Zhao,Haiyu Dong

Osmotic energy, as a clean and renewable energy source derived from the salinity gradient between seawater and river water, holds great potential for alleviating global energy shortages. However, the development of high-performance nanofluidic membranes with both high strength and efficient ion transport properties remains a critical bottleneck in practical application. Herein, we report a sulfonated aramid nanofiber (SANF) membrane fabricated by a vacuum filtration method, which possesses a highly ordered three-dimensional (3D) nanoporous structure. The SANF membranes exhibit outstanding mechanical properties with a tensile stress of 449.96 MPa and a strain of 5.20%. The improved surface charge density endows the membrane with an ultrahigh cation selectivity of 0.969 under a 50-fold salinity gradient. Under a 50-fold salinity gradient, the SANF membrane delivers a high power density of 11.65 W m−2. Notably, the energy generation device retains 97.0% of its initial performance after continuous operation for 60 days, revealing excellent long-term stability. When mixed with real river and seawater, the power density still exceeds 11 W m−2. Furthermore, when scaling up the effective area to 7 mm2, a maximum output power of 1.36 W m−2 is achieved. This work provides a robust and high-performance nanofibrous membrane candidate for promoting the practical application of osmotic energy conversion technology.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

A Strong Adhesive with High Switching Ratio Achieved by Phototriggered Azobenzene-Terminated Hyperbranched Polymer

Chenghao Zhang,Yichen Ding,Tang Li,Zhengyu Gu,Yan Zheng,Xiaoliang Wang,Dongshan Zhou

Photoswitchable adhesives realized by azobenzene groups exhibit important applications in flexible electronics, micro/nanotransfer printing, and soft robots. Such phototriggered reversible adhesives, however, suffered from a contradiction between adhesion strength and switchability. Here, we present a hyperbranched polymer with terminal groups of azobenzene as a photoswitchable adhesive. This adhesive demonstrates both a high adhesion strength and a high switching ratio after UV light irradiation. By introducing abundant hydrogen bonds into the hyperbranched polymer through selecting the appropriate monomer, the cohesive strength and interfacial interactions were enhanced, thereby improving the adhesion strength of the adhesive. Simultaneously, due to the presence of azobenzene groups, the hyperbranched polymer underwent a significant solid–liquid phase transition under UV irradiation, disrupting its cohesive strength and achieving strong switchability. On the basis of the comprehensive evaluation of both adhesion strength (8.07 MPa) and switching ratio (53.80) on glass, our optimal adhesive outperforms previously reported azobenzene-based reversible adhesives. This hyperbranched polymer provides an alternative to developing switchable adhesives for advanced manufacturing.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Electronic Materials · 2026 · IF 4.7

Cation-Exchange Synthesized CdTe/HgTe Core/Shell Quantum Dots as Hole Transport Layers for HgTe Quantum Dot Photodetectors

Runze Huang,Mengxuan Yu,Xingchen Zhang,Xudong Hu,Xi Ran,Mohan Yuan,Jun Ouyan,Jungang He,Xinzheng Lan

HgTe colloidal quantum dots (CQDs) possess an ultra-broad spectral response, good air stability, and tunable surface chemistry, making them a promising candidate material for next-generation infrared photodetectors. However, the development of HgTe CQD infrared photodetectors has been hindered by the limited availability of favorable hole transport layers (HTLs). Herein, we report high-quality HTLs based on CdTe/HgTe core/shell CQDs. The CdTe/HgTe CQDs were synthesized via a facile cation exchange strategy using CdTe CQDs. Based on the CdTe/HgTe CQD HTL, a p-on-n structure HgTe CQD photodiode was fabricated. An external quantum efficiency of 50.5% and a specific detectivity D* of 1.73 × 1012 Jones at a wavelength of 1600 nm were achieved. Subsequently, the device was successfully employed for infrared imaging. This study identifies a facile approach for the fabrication of high-quality HTLs for HgTe CQD photodiodes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2026 · IF 7.6

Chloride-Engineered CO Selectivity Promotion in Integrated Carbon Capture and Hydrogenation

Bocheng Yu,Dingli Li,Fangjing Du,Shuzhuang Sun,Muqing Yang,Xiaohan Li,Yaozu Wang,Wentao Du,Yijian Qiao,Xuan Bie,Haijun Zhang,Haiyang Liu,Qinghai Li,Yanguo Zhang,Shaoguang Feng,Hui Zhou

Achieving high CO selectivity in integrated carbon capture and hydrogenation (ICCH) remains a challenge because Ni-based dual functional materials (DFMs) inevitably catalyze competing methanation. Here, we demonstrate that trace chloride incorporation into Ni–Ca DFMs switches the dominant hydrogenation pathway from methanation to the reverse water−gas shift reaction. Chloride preferentially interacts with the CaO sorbent phase, forming Ca–Cl species that drive CaO densification and substantially lower the reducibility of the adjacent Ni active sites. Consequently, the 1% Cl-modified DFM attains 91.6% CO selectivity at 600 °C, in contrast to the 20.5% CO selectivity of the Cl-free counterpart. Cyclic testing confirms that the Cl-modified DFM maintains stable CO2 conversion and high CO selectivity. In situ experiments further show that chloride suppresses the deep hydrogenation of formate intermediates, thereby terminating the reaction at the CO-forming step rather than proceeding to CH4. This study establishes halogen engineering as an effective and operationally simple strategy for steering product selectivity in ICCH processes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY · 2026 · IF 4.6

Deep-Ultraviolet Transparent Zr/Hf Fluorides with Second-Harmonic Generation Effects Induced by Alkali-Metal Modulation

Ling Wang,Mei Yan,Min Li,Zheng-Yu Yang,Xian Li,Wenfeng Zhou,Ru-Ling Tang

Zirconium/hafnium fluorides have recently garnered considerable interest as potential optical materials, owing to their short ultraviolet (UV) cutoff edges. Transforming centrosymmetric (CS) structures into noncentrosymmetric (NCS) analogues through cationic regulation has proven to be an effective approach for the development of nonlinear-optical (NLO) materials. Herein, various Zr/Hf-based fluorides with different alkali-metal cations, including K8M5F28(H2O) (M = Zr(1), Hf(2)), CsNaHfF6 (3), and LiK10M6F35(H2O)2 (M = Zr(4), Hf(5)), were synthesized. 1–3 belong to centrosymmetric space groups, whereas 4 and 5, incorporating the Li+ cation with a small radius, exhibit NCS crystal structures. 1 and 2 feature chain-like anionic structures. 3 presents a zero-dimensional (0D) anionic structure constructed from isolated [HfF6]2– octahedra. Compounds 4 and 5 adopt three-dimensional (3D) anionic networks. The introduction of Li+ enhances structural distortion and dipole alignment, resulting in phase-matchable (PM) second-harmonic-generation (SHG) responses. Notably, all compounds exhibit UV absorption edges below 200 nm, confirming superior UV transparency. Overall, these results indicate that alkali-metal regulation is an efficient approach to trigger symmetry breaking while concurrently enabling SHG activity and maintaining short UV absorption edges.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Optical Materials · 2026 · IF 3.4

Exploration of Nd-Doped MAPbBr3 Single Crystals for Potential Space X-ray Detection

Dong Liu,Shuyi Zhang,Luzong Jing,Hao Wang,Guanwen Chen,Longfei Xu,Hongqiang Song,Xiangliang Kong,Zhongchen Wu,Yao Chen

The rapid expansion of commercial spaceflight is driving space X-ray detectors toward ultimate cost-effectiveness. Compared with conventional semiconductors, metal halide perovskites, with superior optoelectronic properties and low-cost solution processability, are promising candidates for space radiation detection. Herein, we first synthesized Nd-MAPbBr3 single crystals, with Nd3+ causing lattice contraction and thus improving the crystal tolerance factor. We uncover a correlation between color evolution and crystallization, with the precursor solution turning purple from colorless after adding NdBr3 and yellowing during crystallization due to methylamine oxidation. The fabricated planar Nd-MAPbBr3 X-ray detector exhibits a sensitivity of 162.64 μC Gy–1 cm–2 and a detection limit of 4 μGy s–1 under a low electric field of 20 V cm–1. Notably, after cumulative X-ray irradiation of 320 mGy, the sensitivity of the Nd-MAPbBr3 detector improves by 33.75%, demonstrating superior radiation tolerance. These results highlight Nd-MAPbBr3 single crystals as a promising material for space X-ray detection.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
LANGMUIR · 2026 · IF 4.4

Ultrahigh Stretchability of Organogel Networks: Fiber Evolution and the “Fishing Net Model”

Xiaoqian Tong,Jinjie Guan,Huili Yuan,Likang Zhou,Si Chen,Xu Wang

Stretchable gels have attracted tremendous attention in the fields of flexible electronics and wearable devices. However, the lack of systematic observations on microstructural evolution during ultrahigh stretching (above 400%) restricts the rational design of high-performance stretchable gel materials. In this work, a methyl methacrylate (MMA)-based organogel with 0.5 wt % POSS-G1-BOC (POSS = polyhedral oligomeric silsesquioxane, a POSS core organic–inorganic hybrid dendrimer) as the gelator (denoted as MMA/0.5 wt % POSS-G1-BOC) was fabricated. Assisted by 3 M VHB tape, the organogel achieves an unprecedented uniaxial tensile deformation up to 800%. Combining scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and dynamic mechanical analysis (DMA), six regular evolutionary behaviors of the fiber network during stretching from 0% to 900% are systematically revealed: (1) a progressive decrease in fiber diameter; (2) a gradual reduction in mother-fiber spacing; (3) enhanced uniaxial orientation along the stretching direction; (4) an increase in the number of mother-fibers accompanied by shortened and reduced daughter-fibers; (5) the fusion of mother/daughter-fibers with regular-shaped defects at 900% stretching; and (6) stretch-induced growth of POSS-G1-BOC crystalline dots. To elucidate the uniform energy dissipation during ultrahigh stretching, a “Fishing Net model” is proposed, in which the dynamic breakage and recombination of hydrogen bonds between POSS-G1-BOC molecules act as the core driving force. Furthermore, by comparing with the liquid crystal (5CB, 4-cyano-4′-biphenyl)-based gel system, the regulatory role of solvent polarity in fiber formation and tensile performance is clarified. This work provides direct experimental evidence and a theoretical framework for understanding the microstructural changes of gels under ultrahigh stretching and thus guides the development of next-generation stretchable materials.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL SCIENCE & TECHNOLOGY · 2026 · IF 12.2

Unlocking the Potential of Metal Sulfides and Edge Plane Engineering for High-Capacity Thallium Adsorption from Non-ferrous Smelting Gas

Fenghua Shen,Yu Zou,LeLe Liu,ZiXi Zhang,Xingyuan Yu,Chaolong Liu,Kaisong Xiang,Hui Liu

As a highly toxic heavy metal, the atmospheric thallium (Tl) emission from non-ferrous smelting has gained increasing attention, yet it still lacks a sufficient understanding of gaseous thallium purification through adsorption. Herein, we demonstrate for the first time that metal sulfides, including MoS2, CuS, and ZnS, are active in TlCl adsorption, wherein MoS2 exhibits the best activity. A crystal plane engineering strategy was proposed to fabricate the edge plane of MoS2, uncovering a critical law that the TlCl adsorption ability of MoS2 highly depends on the formation of edge sites. Edge-enriched MoS2 realizes a record TlCl adsorption capacity of 159.3 mg g–1 at 250 °C under a pure N2 atmosphere, which is two times higher than the current sorbents. Both Mo6+ and S22– are active centers for getting electrons from Tl+ and achieving the chemisorption of TlCl. Electron density difference analyses verify the stronger activity of edge Mo sites in withdrawing electrons from Tl+ than the basal S sites. MoS2 displays strong resistance to SO2 and H2O and can utilize O2 to generate Mo6+ species, which ensures its stability for TlCl adsorption under smelting gas. This work establishes metal sulfides as promising sorbents for gaseous Tl removal and introduces new insights into the design of high-performance sorbents for heavy metal control.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Microfluidic-Assisted Blow-Spinning Strategy for Fabricating Nanofiber Aerogels toward High-Efficiency Thermal Insulation

Jie Ren,Jun-Sheng Ge,Xing-Guo Fu,Guo-Xing Li,Chang Liu,Su Chen

The traditional methods of preparing aerogels exhibit some shortcomings, such as uncontrollable pore morphology, complex process, and poor mechanical properties, which greatly limit the application of aerogels in personal thermal management (PTM). Herein, we propose a microfluidic-blow-spinning strategy that leverages the confinement effect of microchannels to enhance the mixing efficiency of different components, thereby enabling efficient homogenization of multiple components in the microfluidic field. Meanwhile, due to the continuous flow characteristics inherent to microfluidic systems, dynamic regulation of fiber microstructure composition during the spinning process can be achieved. The as-prepared fiber aerogels exhibit an ultralow density of 8.6 mg/cm3, can withstand tensile stress up to 5000 times their own weight, and retain nearly negligible plastic deformation even after 1000 compression cycles. More importantly, these fiber aerogels possess multimodal cooling functionalities through polyvinylpyrrolidone (PVP)-mediated evaporative cooling and silica (SiO2)-endowed excellent infrared emissivity, achieving a temperature reduction of 6.5 °C under natural sunlight, thereby outperforming commercial down products. Ascribed to the above facile and scalable preparation process, these fiber aerogels demonstrate broad application prospects in personal thermal management under extreme environmental conditions.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2026 · IF 5.8

Atomic-Scale Surface Formation of 4H–SiC during Chemical Mechanical Polishing through Catalyst-Induced Dual-Pathway Oxidation

Xin Song,Zhigang Dong,Chuanqiang Li,Jiani Guo,Renke Kang,Shang Gao

Achieving appreciable material removal while preserving atomic-scale surface integrity remains challenging in CMP of 4H–SiC, largely because the oxidation pathways governing catalyst-assisted removal are still insufficiently understood. Here, a NaVO3–H2O2–SiO2 slurry was employed as a model catalytic system to clarify how H2O2 activation controls interfacial oxidation and material removal during CMP. Compared with a conventional H2O2–SiO2 slurry, the NaVO3-containing system increased the MRR from 27 to 366 nm h–1 while producing an atomically smooth surface with Sa below 0.1 nm. Combined experiments and first-principles calculations reveal that this enhancement originates from a catalyst-induced dual-pathway oxidation mechanism. In the first pathway, NaVO3 activates H2O2 to form pervanadate species, represented by [VO(O2)(OH)2]−, which directly oxidize surface Si–C bonds and initiate the formation of a SiO2-rich tribolayer. In the second pathway, reduced V(IV) intermediates further react with H2O2 through a Fenton-like route to generate hydroxyl radicals, which sustain tribolayer renewal and deepen surface oxidation. Electrochemical measurements, UV–vis spectroscopy, XPS, cross-sectional TEM, and density functional theory consistently support this mechanism. These results establish a mechanistic framework linking catalytic H2O2 activation, interfacial oxidation, tribolayer evolution, and atomic-scale surface formation in 4H–SiC CMP.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2026 · IF 5.8

Plasma-Induced Bandgap Engineering and Defect Modulation in g-C3N4 for Photocatalytic H2O2 Production

Mengting Li,Yiping Liu,Wenxuan Liu,Yuqing Wang,Bo Fu,Meisi Chen,Licheng Li,Fang Guo,Muhua Chen

Graphitic carbon nitride (g-C3N4) is a promising metal-free photocatalyst for solar-driven H2O2 production, yet its activity is intrinsically limited by a narrow visible-light response, rapid charge recombination and low surface area. This work reports a cold plasma engineering strategy using radio frequency (RF), dielectric-barrier-discharge (DBD) and glow-discharge (GD) treatments to simultaneously modulate the morphology, defect chemistry and electronic structure of g-C3N4. Among the three protocols, RF plasma yields a “sponge-like” architecture with a 53% larger specific surface area (43.7 m2 g–1) and introduces nitrogen/oxygen-containing surface species that narrow the bandgap from 2.32 to 2.12 eV while preserving the crystalline framework. As a result, NCN-RF exhibits the highest H2O2 evolution rate among the investigated samples, reaching 1239 μmol g–1 h–1 under visible light irradiation (λ ≥ 420 nm), which is 4.7 times that of pristine NCN, and retains ∼80% activity after three cycles. Radical trapping and in situ EPR spectroscopy reveal a sequential two-electron oxygen-reduction pathway dominated by ·O2– intermediates. The enhanced activity is mainly attributed to the combined contribution of defect-modulated electronic structure, oxygen-containing surface species that may facilitate interfacial charge regulation, and a mesoporous network that improves mass transport. This work demonstrates a simple dry plasma-assisted surface modification strategy based on combined electronic-structure and morphology modulation for designing carbon nitride based photocatalysts for photocatalytic H2O2 production.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMISTRY OF MATERIALS · 2026 · IF 7.1

Tailoring B-Site Preferential Occupations for Tunable Magnetism in Spinel High-Entropy Oxides via Nonmagnetic Al3+ Probe

Hao Deng,Jiyang Xie,Dandan Gao,Wanbiao Hu

The rich diversity of transition-metal pairs bridged by oxygen contributes to the fascinating magnetic behaviors in high-entropy oxides (HEOs), while the complex interplay between multisite lattice configurations, spin states, and magnetic exchange interactions remains yet to be explored. Here, we report the Al3+-driven octahedral site preferential occupations and tunable magnetic frustration in spinel-type [5M1/(5+x)Alx/(5+x)]3O4 (x = 0–5; M = Cr/Fe/Mn/Zn/Co) HEOs. Nonmagnetic Al3+ preferentially occupies octahedral sites (PB), which significantly distorts the lattice with expansion in tetrahedral sites while shrinkage in PB–O. This structural evolution enables tuning of magnetic properties, e.g., competition between ferromagnetic and antiferromagnetic states, spin glass, and spin-flop frustration states. Alternating-current susceptibility presents apparent spin frustration that follows a critical slowing-down model, which is suppressed when the Al3+ level is beyond x = 2 because of the weakly frozen and disordered magnetic moments. These findings bring insights into modulating magnetic exchange interactions within multiple structural complexities for designing HEOs with tunable magnetic properties.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。