APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Sadegh Ghorbanzadeh,Wei Zhang,Zeinab Sanaee,Somayeh Mohammadi
The synthesis of MXenes with high surface area and porosity remains challenging due to reliance on aggressive etchants and delamination step. This work reports a mild and straightforward strategy to synthesize Ti 3 C 2 and Ti 2 C MXenes using a nano-platelet MAX phase precursor prepared via anisotropic molten salt synthesis. This precursor’s unique architecture—featuring a 15× higher surface area and 5× greater pore volume than conventional MAX phases—enables efficient Al removal with dilute hydrofluoric acid (4% HF), eliminating the need for delamination agents or post-etching processing. These MXenes achieve a high specific surface area of 105m 2/g and pore volume of 0.11c m3/g, representing 5- and 3-fold improvements over conventional MXenes. Notably, this work demonstrates the first investigation of MAX phase photothermal properties and establishes a new synthesis paradigm that eliminates delamination requirements while achieving record photothermal conversion efficiency (71.4% for MXene, 63.1% for MAX). The pre-engineered nanoplatelet architecture inherently prevents restacking, enabling stable performance for over 200 days without intercalation agents—addressing a critical limitation in MXene shelf-life and practical applicability.
✓ 已验证
产品关联
DOI
高影响因子
Reaction Chemistry & Engineering
·
2026
·
IF 2.9
Ruitong Ma,Bing Liu,Ruibo Wang,Zhijiong Wu,Liying Guo
Four types of metal-based ionic liquid catalysts [DA-2PS][FeCl4]2, [DA-2PS][MnCl3]2, [DA-2PS][AlCl4]2, and [DA-2PS][SnCl5]2 were prepared. Their structure and thermal properties were characterized and analyzed by FTIR, 1H NMR, and TGA. The type of acids was analyzed using pyridine infrared spectroscopy. Waste polyester fiber (PET) was used as the sample for glycolysis, and the performance of the four metal-based ionic liquid catalysts in degrading PET was investigated. By optimizing the process parameters, the best reaction conditions were obtained, the chemical structure and purity of the degradation product bis(hydroxyethyl) terephthalate (BHET) were analyzed. The results showed that the four metal-based ionic liquid catalysts were successfully synthesized and exhibited good thermal stability, among which [DA-2PS][FeCl4]2 demonstrated the best catalytic performance. Under the conditions of a temperature of 190 ℃, a mass ratio of ethylene glycol to PET of 9:1, a reaction time of 7 h, and a catalyst amount of 2.5% of the total mass of the reactants, the PET conversion reached 96.5%, and the BHET yield was 89.1%. Furthermore, the catalyst maintained high catalytic activity even after six cycles of use, indicating that the synthesized metal-based ionic liquid catalysts exhibit excellent catalytic degradation performance for PET, providing a theoretical basis for the chemical recycling of waste polyester fiber.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2026
·
IF 4.1
Liuyi Huang,Xinhui Gu,Fengna Xi
Establishing sensitive detection method for carbohydrate antigen 15–3 (CA15–3) is of great significance for the early diagnosis and therapeutic monitoring of breast cancer. Herein, an electrochemiluminescence (ECL) sensor was fabricated by growing Co 3 O 4 nanoparticles in-situ within nanochannels and employing a signal gating strategy, achieving highly sensitive detection of CA15–3. Using simple Stöber method, a silica nanochannel film (SNF) was deposited onto an indium tin oxide (ITO) glass electrode. This two-dimensional (2D) nanoporous silica film provided a confined space, within which Co 3 O 4 nanozymes were synthesized in situ. Co 3 O 4 served as a peroxidase (POD)-mimic nanozyme, enabling the catalytic conversion of hydrogen peroxide (H 2 O 2 ) into reactive oxygen species (ROS). Functioning as a nanocatalyst, Co 3 O 4 remarkedly enhanced the electrochemical oxidation of luminol, thereby boosting the ECL signal. This dual enhancement mechanism enabled the sensor to achieve high luminol-based ECL signal. The bio-recognition interface was constructed by functionalizing the outer surface of SNF with silane coupling agents and immobilizing aptamers. A measurable decrease in the ECL signal was generated due to the hindered diffusion of the emitter and co-reactant and increased interfacial resistance, which occurred when the aptamer-CA15–3 complex formed on the electrode surface. This response allowed for the quantification of CA15–3. Under optimal conditions, the developed aptasensor can detect CA15–3 in the range of 0.1 to 10,000 mU/mL, with a limit of detection of 26 μU/mL. Owing to its merits of simple fabrication, rapid analysis, high sensitivity, good reproducibility, and excellent selectivity, the developed immunosensor holds great potential for clinical diagnostics of tumor biomarkers.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2026
·
IF 17.2
Qinghua Liu,Peiqing Cai,Hengshuai Li,Xue-Yang Ji,Dafeng Zhang,Xipeng Pu
S-scheme heterojunctions can offer an effective strategy for spatially separating photogenerated charge carriers, thereby sig F nificantly enhancing photocatalytic performance. In this study, cadmium sulfide (CdS)/copper tungstate (C F uWO 4 ) (CdS/CW) S-scheme heterojunction photocatalysts with adjustable components were fabricated by decorating CdS nanorods with CuWO 4 nanoparticles. The optimal hydrogen evolution rate (2725.91 μmol g –1 h –1 ) of CdS/CW-10% with excellent cycling stability under visible light is 10.1-fold higher than pure CdS. Density functional theory calculations and photoelectrochemical analyses confirmed that the S-scheme charge-transfer mechanism from CdS to CuWO 4 is responsible for the enhanced photocatalytic performance by promoting charge separation. Additionally, the photothermal effect of CuWO 4 increased the local temperature of the photocatalyst, further accelerating the reaction kinetics. This study highlights a dual-enhancement approach based on interfacial charge modulation by constructing an S-scheme heterojunction and photothermal activation, providing valuable insights into the design of high-efficiency S-scheme photocatalysts for solar-driven hydrogen production.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2026
·
IF 5.9
Zhichao Ma,Yiran Wang,Yanxin Qin,Qikun Yin,Ming Wei,Wenbo Lu
The development of a quantitative electrochemical method for H 2 O 2 detection is crucial as it enables the real-time assessment of both bleaching agent residues in food and oxidative stress in cancer cells. The single-atom Co catalyst Co SAs@ZIF-NC was prepared using a bimetallic ZIF-8-67 precursor via a template-confined synthesis strategy. Successful synthesis was confirmed through comprehensive characterization of its structure and morphology using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller method, and X-ray absorption near edge structure. The as-synthesized Co SAs@ZIF-NC was immobilized on the surface of a pencil-lead graphite electrode, enabling the electrochemical detection of H 2 O 2 . The H 2 O 2 sensor showed excellent analytical performance for H 2 O 2 detection, with a linear range of 1–2000 μM, a detection limit of 0.21 μM, and a sensitivity of 2395.54 μA·mM -1 ·cm -2 (S/N=3), alongside reliable selectivity, stability, and reproducibility. It was successfully applied to determine H 2 O 2 residues in food and monitor extracellular H 2 O 2 levels in A549 cells. Therefore, this paper proposes a novel material design strategy for single-atom catalysts for electrochemical H 2 O 2 sensing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Yue Feng,Puxiang Zhao,XueChang Pei,Di Liu,Pengfei Ma,Chuanxi Wang,Mingxian Liu
Diabetic wounds frequently develop infections and impaired healing due to the hyperglycemic microenvironment, creating a need for dressings with combined antibacterial and tissue-regenerative functions. Here, the lumens of halloysite nanotubes (HNTs) were employed for confined in-situ synthesis of silver nanoparticles (Ag@HNTs), which were then incorporated into a chitosan matrix by solution mixing and freeze-drying to produce porous Ag@HNTs-CS sponges. The lumen-confined synthesis generated uniformly distributed Ag nanoparticles in the HNT lumens, which reduced aggregation and direct cell contact, thereby lowering toxicity and enabling sustained Ag + release. The composite exhibited triple antibacterial functionality, combining bactericidal effects mediated by chitosan, Ag + sustained release, and enhanced photothermal activity under 808 nm irradiation, strongly inhibiting E. coli and S. aureus . In a diabetic rat model with infected full-thickness skin defects, these sponges significantly promoted wound healing. Mechanistically, the sponges reduced TNF- α , increased IL-10 and VEGF, mitigating inflammation while enhancing neovascularization and collagen deposition. The confined-synthesis of metal nanoparticles within the HNT lumens and incorporation into a biopolymer matrix ensures sustained metal ion release, high photothermal performance and bioactivity, which offer a promising strategy for infected wound management.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Tingting Xu,Ruixiang Xie,Yiyu Long,Jianrong Da,Yao Xu,Guanghui Lu,Huiyang Bian,Shumei Wang,Hongqi Dai
The development of multifunctional papermaking additives has long been a research focus. Attapulgite, a naturally abundant chain-layered magnesium-aluminosilicate clay mineral, is a promising non-metallic resource. When incorporated into pulp, its notable adsorption capacity, colloidal properties, and hydroxyl-rich structure may promote compatibility with plant fibers, thereby improving paper uniformity, smoothness, and flexibility. Furthermore, owing to its high specific surface area and strong surface adsorption effects, attapulgite can be easily surface-modified through simple treatments to enhance bonding between paper fibers and fillers, reduce retention aid usage, and even serve as a functional filler. However, current challenges include irregular mining practices for raw attapulgite ores, compositional complexity, insufficient analysis of its structural and physicochemical properties, and limited research on post-modification strategies, all of which hinder its high-value applications. To address these limitations, this study utilized raw attapulgite ore as a base material. After purification via a straightforward washing method, its surface was modified with polydopamine to serve as a carrier for silver nanoparticles, yielding a highly dispersed functional attapulgite-based filler for papermaking. The modified attapulgite filler demonstrated significant performance enhancements: after paper formation, the white water turbidity decreased from 81.8 NTU to 40.3 NTU. The paper tensile index was maintained with a slight improvement, increasing from 23.97 N·m·g⁻¹ to 24.81 N·m·g⁻¹ . No significant adverse effects were observed on the bulk, opacity, or whiteness. Moreover, it exhibited favorable antibacterial activity, with inhibition zone diameters of 11.80 mm and 12.14 mm against E. coli and S. aureus , respectively. These results confirm that simple purification and modification strategies can endow attapulgite fillers with multifunctionality, providing a practical reference for future applications of attapulgite-based functional materials in the paper industry.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2026
·Vol. 46
·期 9
·118205
·
IF 6.3
Yang Zhou,Yanling Huang,Qiumei Huang,Ning Guan,Ning Zhang,Huaicheng Xiang,Ying Tang,Liang Fang
Next-generation wireless communication demands microwave dielectric ceramics that effectively achieve ultra-low loss, a stable resonant frequency, and a low permittivity. Here we demonstrate an entropy-engineering strategy that selectively disorders the [A(2)O 6 ] octahedral site while preserving the rigid [GaO 4 ] tetrahedral backbone in gallium-based olivine A 2 GaO 4 . A series of CaY 1– x (Nd 0.25 Sm 0.25 Eu 0.25 Yb 0.25 ) x GaO 4 ceramics was synthesized by solid-state reaction at 1260–1420 °C. Systematic increases in configurational entropy (ΔS config ) and ionic-size disorder ( δ R ) drive a reversible Pnma → Pmnb symmetry switch, suppress phase separation, and expand the lattice. At x = 0.8, the high-entropy single-phase olivine exhibits ε r = 9.2 ± 0.2, Q×f = 151,025 ± 400 GHz, and τ f = -39.8 ± 2.0 ppm/°C, while Vickers hardness rises to 5.79 ± 0.2 GPa. Ultra-low loss is synergistically influenced by ΔS config , δ R , and packing fraction. A C-band dielectric resonator antenna fabricated from the x = 0.8 composition achieves 92.63 % radiation efficiency and 6.39 dBi gain, validating the entropy-design paradigm for high-frequency applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2026
·
IF 3.2
Yao Zhou,Xin Zhang,Wenjun Chu,Xinyu Yin,Lulu Tang,Han-Shu Xu
We report the growth of high-quality, millimeter-sized Ba 5 Nb 4 O 15 single crystals using a flux method, with the largest crystals reaching dimensions of 3 × 1.5 × 0.3 mm 3 . X-ray diffraction (XRD) analyses confirms that Ba 5 Nb 4 O 15 crystallizes in the hexagonal perovskite-related structure with space group P 3 ‾ m 1 , and that the naturally exposed facets correspond to the (00 l ) plane. Importantly, the temperature-dependent specific heat is well described by the Debye–Einstein phonon model, yielding a Debye temperature ( Θ D ) of 165 K and an average phonon velocity ( v p ) of 1343.9 m/s. Moreover, no anomaly indicative of a structural phase transition is observed in the entire measurement range of 2–220 K.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Zhangyue Shen,Xiuqin Wang,Xianbing Xu,Shengjie Li,Yuanyuan Liu,Yugang Wang,Hairong Sun,Zhenhua Zhu,Jinfeng Pan
This study modified cellulose nanocrystals (CNC) with casein (CA) using ultrasound (U). Ultrasound treatment (U-CA-CNC) reduced particle size and created uniform filamentous networks compared to just CA-CNC. Analysis showed enhanced hydrogen bonding between CA and CNC due to ultrasound. U-CA-CNC and CA-CNC significantly improved interfacial properties: contact angle increased while interfacial tension decreased sharply. Consequently, high internal phase emulsions (HIPEs) stabilized by these modified particles, especially at CA:CNC ratios of 1:1.5 or 1:2, had smaller droplet sizes, higher elasticity (G'), and higher viscosity. These HIPEs remained stable without delamination after 15 days at 4 °C when inverted and showed lower oxidation (TBARS). Ultrasound effectively improved the CA-CNC interfacial properties, enabling stable HIPEs with enhanced rheology.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2026
·
IF 9.2
Wei Liu,Zhengtong You,Shiqi Qin,Zhipeng Hu,Jiaxin Mu,Zhijun Zhang,Yanjun Xie,Qingwen Wang,Charles U. Pittman
Developing sustainable carbon materials with both dye adsorption and electrochemical properties offers a promising strategy for carbon neutrality. Herein, a coupled carbonization strategy was employed to prepare porous carbon with high-level heteroatom doping and hierarchical pores, involving the co-hydrothermal treatment of wood flour with phytic acid and melamine, followed by K 2 CO 3 activation. Phytic acid and melamine act as P/N sources and structural builders, promoting hydrochar formation via phosphate coordination and condensation reactions, resulting in a stable cross-linked network rich in N, P, and O. The resulting N, P co-doped hierarchical porous carbon (NP-PC) exhibits an ultrahigh surface area (2792 m 2 g −1 , a 344 % increase compared to pure wood flour-derived carbon), suitable mesoporosity (36 %), and tailored surface chemistry (19.86 at% heteroatom content). At room temperature, NP-PC demonstrates an exceptionally high adsorption capacity for methylene blue (3028 mg g −1 after 6 h contact) and rapid adsorption kinetics (90 % removal within 5 min), outperforming most reported carbon-based adsorbents. NP-PC retains an adsorption capacity above 2500 mg g −1 even after five regeneration cycles. As a supercapacitor working electrode, NP-PC electrode also shows excellent electrochemical performance, delivering a specific capacitance of 380 F g −1 at 0.5 A g −1 and retaining 273 F g −1 at 25 A g −1 . This study achieves the conversion of low-value biomass into high-performance functional carbons, providing a sustainable solution for integrated environmental and energy applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.9
Jiao Yang,Zhihui Zhou,Lu Xia,Shiyi Wang
The development of advanced lithium-ion batteries (LIBs) is currently hindered by the inherent limitations of conventional polyolefin separators, particularly their poor electrolyte wettability and susceptibility to thermal shrinkage at high temperatures. Herein, a novel composite separator was successfully fabricated by the in-situ growth of a silica aerogel (SA) and bacterial cellulose (BC) framework onto a polypropylene (PP) substrate. The resulting SA/BC-5@PP separator features a three-dimensional interconnected porous architecture that significantly enhances electrolyte affinity, achieving a high electrolyte uptake of 246.1% and a reduced contact angle of 6°. The structural design reduces thermal shrinkage by 45% relative to PP separators at 170 ℃, ensuring dimensional integrity. Furthermore, the SA/BC-5@PP separator facilitates rapid ion transport kinetics, attaining a superior ionic conductivity of 0.85 mS cm − 1 and an elevated Li + transference number of 0.69. Consequently, the Li||LiFePO 4 full cell utilizing this modified separator exhibit outstanding rate capability, delivering a specific capacity of 2.26 times greater than that the PP separator at 5C, and superior long-term stability with 82.13% capacity retention after 500 cycles at 1C. These findings suggest that the synergistic integration of SA and BC enables high-performance, thermally stable separators, offering a promising pathway toward safer and more efficient LIBs.
✓ 已验证
产品关联
DOI
高影响因子