LANGMUIR
·
2026
·
IF 4.4
Peihang Li,Xinyue Wang,Xiaoqin Li,Wenhui Lin,Linfeng Chen,Jie Xiao,Chang Liu,Yaoyu Pan,Xueqin Chen,Bingbing Jiang
Porous organic polymers (POPs) are promising photocatalyst substrates due to their high surface area, tunable pore size, and functionalization versatility. However, these materials face challenges in structural stability suffering from reversible covalent bonds, rapid electron–hole recombination, and limited scalability in synthesis for photocatalytic water purification. Herein, we demonstrate a cost-effective strategy by depositing nonprecious metal hydroxides (Fe(OH)2, Ni(OH)2, and Zn(OH)2) onto a simple triazine-based POP (PT) to enhance interfacial charge transfer and photocatalytic activity. Remarkably, the Zn(OH)2-modified PT composite (PT-Zn(OH)2) achieves 98% degradation of 10 ppm methylene blue within 40 min─a 2.3-fold improvement over pristine PT (42%). Systematic characterization (UV–vis, XPS-VB, electrochemical impedance spectroscopy, and PL) reveals that Zn(OH)2 deposition optimizes the semiconductor’s band structure, reduces charge recombination, and improves interfacial electron–hole separation kinetics. This work highlights the pivotal role of metal hydroxide-POP interfacial engineering in enhancing photocatalysis and provides a scalable, precious-metal-free design for efficient pollutant degradation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Letao Guo,Wenna Tang,Lixia Yang,Mei Yang,Guangwen Chen
β-Hydroxy-α-phenyl esters are valuable intermediates in pharmaceutical synthesis. However, their preparation via strong base-mediated aldol condensation typically requires cryogenic conditions to achieve high yields. Herein, a continuous-flow strategy was developed for the efficient synthesis of β-hydroxy-α-phenyl esters at room temperature or slightly above, using the lithium diisopropylamide (LDA)-mediated aldol condensation of methyl phenylacetate with 3-pyridine aldehyde as a model electrophile. In batch processing, the product yield dropped markedly from 68% at −60 °C to 27% at 20 °C, accompanied by increased byproduct formation. In contrast, the continuous-flow platform enabled rapid mixing and precise residence time control, allowing the enolate to be delivered immediately to the subsequent electrophilic addition step, thereby suppressing side reactions. As a result, high yields of 77–88% were achieved at 20–40 °C with reduced byproduct formation. The effects of key operating parameters were systematically investigated, and the product diastereoselectivity was found to be primarily affected by temperature.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2026
·
IF 5.8
Hengchao Zhang,Rushun Xue,Mengke Li,Zhihao Wang,Lei Cao,Shanglin Yang,Xuefeng Xiao,Xiaojuan Li,Xiaozhou Feng,Xinhui Fan,Lingmin Yu
In situ grown 3D CuO nanoarray structures with an ordered architecture have emerged as promising materials for advanced CO gas sensing platforms owing to their intimate anchoring on a substrate, large surface area, and abundant exposed active sites. However, 3D CuO nanoarrays encounter high working temperature, slow response time, and inferior response value, impeding their practical use for CO gas detection. Herein, an Ag electronic sensitization strategy is proposed by a facile in situ deposition method. By innovatively constructing Ag nanoparticle coatings on the surface of CuO nanocone arrays, a high response (Rg/Ra) of 4.95 to 100 ppm of CO was achieved at a lower temperature of 180 °C, which is more than three times higher than that of pure CuO (240 °C, Rg/Ra = 1.53). At the same time, Ag/CuO has a fast response time (tres) of 49 s and a recovery time (trec) of 56 s, which is at least 19 s shorter than pure CuO. In addition, the sensor has good CO selectivity for other gases such as CO, NH3, C3H6O, and CH4O, as well as long-term stability for 8 weeks (relative error 4.03%), which is better than pure CuO (relative error 6.45%). This excellent performance is mainly attributed to the synergistic effect of the unique nanoarray structure of Ag/CuO and the strong sensitization effect of Ag. Therefore, this study provides a novel and promising strategy for developing high-performance chemical sensors using interfacial engineering.
✓ 已验证
DOI
高影响因子
LANGMUIR
·
2026
·
IF 4.4
Huiyun Xia,Changan Guo,Gang He,Lifang Song,Ni Yan,Wenshuo Zhang
Conventional photocatalytic coatings for nitric oxide (NO) abatement often suffer from the accumulation of toxic nitrogen dioxide (NO2) as an intermediate byproduct, undermining their environmental friendliness. To address this challenge, a layered composite coating was designed and fabricated by integrating the photocatalytic C3N4/Bi2WO6 heterojunction onto hollow glass microspheres, followed by fluorination and incorporation into a polymer matrix. This process engineered a robust and hydrophobic surface microenvironment, which remained conducive to the NO/O2 interfacial reaction even under adverse conditions. Consequently, the composite coating exhibits high selectivity in NO oxidation, achieving substantial removal rates (25.4–69.1%) while minimizing the NO2 conversion rate (2.6%) in a low-temperature and dry environment, as verified by in situ monitoring. Interface engineering enhances selectivity by optimizing the adsorption and activation of reactants. The synergy between the coating’s excellent durability, inherent antibacterial, and self-cleaning properties underpins its long-term functional stability. In situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations elucidate the enhanced charge separation/transfer, which in turn promotes a reaction pathway conducive to the selective formation of nitrate. Consequently, this work establishes a practical strategy of microenvironment engineering via rational coating design, advancing photocatalytic technology toward sustainable air pollution control.
✓ 已验证
DOI
PubMed
高影响因子
LANGMUIR
·
2026
·
IF 4.4
Qiqi Gan,Xiao Feng,Dejun Wang,Yanhong Lin,Tengfeng Xie
In the heterogeneous photo-Fenton-like system, enhanced separation and migration of photogenerated charge carriers can further accelerate the redox cycle of metal ions and promote both H2O2 activation and the generation of reactive oxygen species (ROS). In this work, copper-loaded carbon nitride with nitrogen vacancies (Cu-Nv-CN) was synthesized. Cu-Nv-CN exhibits outstanding heterogeneous photo-Fenton-like activity, 94.0% of tetracycline (TCH) is eliminated within 50 min in the presence of 10 mM H2O2, and the corresponding degradation rate constant reached 0.0522 min–1. Surface photovoltage and femtosecond transient absorption (TA) spectroscopy measurements revealed that Cu sites act as effective electron trapping centers. Furthermore, the introduction of Nv drives the rapid migration of photogenerated electrons to the Cu sites. The synergistic interplay between these two factors significantly improves the utilization efficiency of photogenerated charge carriers. The photo-Fenton-like pollutant degradation mechanism of Cu-Nv-CN was systematically elucidated by combining radical trapping experiments, electron paramagnetic resonance (EPR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) measurements. This study proposes a viable strategy for boosting the catalytic activity of graphitic carbon nitride-based photocatalysts in advanced photo-Fenton-like systems.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 5.2
Zhenyu Guo,Qian Zhai,Weiqiang Song,Senlong Yu,Man Liu,Hengxue Xiang,Meifang Zhu
Superhydrophobicity of different materials has become a hot research topic. However, it is still challenging to realize a hydrophobic-to-superhydrophobic transition quickly by a simple process. This is mainly limited by how the surface roughness and stability of the material are constructed. Herein, we successfully prepare a superhydrophobic surface of the polylactic acid (PLA) sheet which is fabricated by an innovative and convenient method of pregrinding and postcoating. The result indicates that PLA coating materials with a multiscale hierarchical micronanostructure exhibit excellent superhydrophobic and self-cleaning properties. PLA coating in a TiO2 nanoparticle suspension without pregrinding resulted in the formation of a four-level hierarchical structure with a water contact angle (WCA) between 120 and 130°. PLA coating sheets with pregrinding in the same suspension possess the resulting multiscale hierarchical structure with a WCA more than 150°, showing superhydrophobicity. This study provides a basis for the design of self-cleaning materials and promotes the wider application of PLA-based superhydrophobic materials.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Xiangyu Sun,Jing Yan,Fengti Guo,Hao Sun,Xiaoqi Xie,Nan Su,Jingxuan Sun,Yumei Niu,Lin Zhang,Lina He
Stem cell transplantation holds great promise for facial nerve repair, yet its efficacy is largely constrained by the excessive accumulation of reactive oxygen species (ROS) and the highly inflammatory microenvironment. Thus, developing bioactive scaffolds with robust antioxidant capacity for stem cell transplantation remains a challenge. In this study, an injectable and self-healing composite hydrogel composed of chitosan, graphene oxide, and cerium oxide nanoparticles (CeNPs) was developed to provide structural support for the neural conduit, create a favorable microenvironment for human dental pulp stem cells (hDPSCs), and effectively promote facial nerve regeneration. The hydrogel exhibited intrinsic shear-thinning, self-recovery, and self-healing properties, ensuring its adaptability to irregular nerve defects and suitability for minimally invasive delivery, while its ROS-scavenging activity effectively reshaped the injury microenvironment to mitigate oxidative stress and inflammatory responses in the transplanted cells. In vitro, the composite hydrogel promoted the specific migration of hDPSCs, while alleviating cellular oxidative damage by modulating the PI3K/AKT signaling pathway to facilitate M2 polarization of macrophages. In a facial nerve defect model, treatment with the hydrogel in combination with hDPSCs significantly improved neurological function and tissue regeneration, achieving morphological and functional outcomes comparable to those of autologous nerve grafts. Collectively, this CeNPs-integrated hydrogel provides adaptive structural support, modulates the injury microenvironment, and promotes stem cell migration, representing a promising bioactive platform with clinical translational potential for facial nerve repair.
✓ 已验证
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Qiannan Hu,Qing Li,Wanchao Zuo,Jiaren Song,Yao Nie,Zhizhong Gu,Bin Di,Zhanhui Wang,Jianjun Dai,Yanmin Ju
Commercial gold nanoparticle-based lateral flow immunoassays (LFIAs) are widely used for point-of-care (POCT) diagnostics; however, inefficient signal transduction and the absence of intelligent interpretation result in low sensitivity and poor quantification. Here, we present an on-device platform (Multimatrix QuantAI-LFIA) that integrates deep learning for the intelligent quantitative detection of staphylococcal enterotoxin B (SEB) across multiple biological matrices. By employing Fe-polydopamine (Fe-PDA) as a charge-transfer-active label for signal transduction, this system displayed superior colorimetric performance owing to efficient ligand–metal charge transfer (LMCT) transitions of Fe(III), achieving an initial visual limit of detection (LOD) of 5 ng/mL within 15 min. Further, the deep learning model enabled robust quantitative analysis under varying illumination conditions, extending the dynamic range to 0.1–800 ng/mL and reducing the LOD to 0.1 ng/mL, which was 50-fold lower than the visual readout. Through transfer learning, the model demonstrated reliable adaptation to serum and urine samples, yielding strong correlations between predicted and actual SEB concentrations (R2 > 0.90). In blind tests, the Multimatrix QuantAI-LFIA achieved an area under the curve (AUC) of 0.924 via a self-developed smartphone application, substantially outperforming naked-eye interpretation (0.700). This on-device platform provides rapid, accurate, and matrix-adaptive quantification, offering a practical pathway toward next-generation POCTs.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2026
·
IF 5.5
Wei Tang,Lei Wu,Huizhen Xu,Hao Xu,Shiying Sun,Chen Yang,Xin Song
Despite the widespread implementation of additive engineering in organic solar cells, the intrinsic mechanisms dictating the halogen-dependent efficacy of these additives remain elusive. Herein, we present a systematic investigation into three 1,8-dihalooctane additives (DClO, DBrO, and DIO) within the PM6:L8-BO system, explicitly correlating their modulation behaviors with halogen identity. Our findings demonstrate that the modulation efficacy is intrinsically governed by the halogen substituent: while DIO exhibits the most potent aggregation regulation, it unfortunately induces severe non-radiative energy loss, thereby compromising the open-circuit voltage. Conversely, DClO displays the weakest modulation capability, resulting in restricted current density and fill factor. Notably, DBrO achieves an optimal trade-off between aggregation control and the suppression of non-radiative energy losses. Consequently, devices processed with 0.5 vol % DBrO deliver the best power conversion efficiency of 19.2% alongside a remarkable fill factor of 79.8%, where the DClO- and DIO-treated devices achieved performances of 18.4 and 18.5%, which are higher than the control device (17.2%) without additive. This work offers fundamental insights into halogen-dependent additive behavior, establishing a rational guideline for additive selection to balance morphological control and non-radiative losses in high-efficiency organic solar cells.
✓ 已验证
DOI
高影响因子
CRYSTAL GROWTH & DESIGN
·
2026
·
IF 3.6
Ying Long,Xuehua Dong,Lin Qi,Lindong Luan,Zichen Ren,Zhien Lin,Guohong Zou
Balancing large birefringence with ultraviolet (UV) transparency remains a central challenge in the development of birefringent crystals. Herein, we report two Sb(III)-based hypophosphites, Sb(H2PO2)2Cl and Sb(H2PO2)2F, and comparatively investigate their crystal structures and optical properties. Single-crystal X-ray diffraction analysis shows that Sb(H2PO2)2Cl crystallizes in a wave-like two-dimensional (2D) layered structure, whereas Sb(H2PO2)2F adopts a 1D chain structure. Optical measurements reveal that Sb(H2PO2)2F exhibits a markedly enhanced birefringence of 0.205 at 546 nm, compared with 0.055 for Sb(H2PO2)2Cl, in good agreement with DFT-calculated values of 0.211 and 0.041, respectively. Meanwhile, Sb(H2PO2)2F retains a wide band gap of 4.81 eV and a short UV cutoff edge of 258 nm, indicating a favorable balance between optical anisotropy and UV transparency. Further structure–property analysis suggests that the enhanced birefringence of the fluoride is closely associated with the more favorable orientational efficiency of the stereochemically active lone pair on Sb3+. These results demonstrate that halogen substitution is an effective approach for tuning optical anisotropy in UV-transparent Sb(III)-based hypophosphites.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Rongfei Kang,Wenxin Fan,Kunyan Sui
Hygroscopic hydrogels are promising materials for high-efficiency sorption-based atmospheric water harvesting (SAWH); however, their practical application is constrained by intrinsically slow water transport within the collapsed dehydrated polymer networks, a process predominantly governed by osmotic pressure gradient (∇πos). Here, we develop a rigid-polymer-network-based interconnected macroporous hygroscopic hydrogel (HRIMP) via a facile foaming-assisted polyelectrolyte diffusion-complexation strategy, enabling ultrafast sorption/desorption kinetics for high-efficiency SAWH. The antishrinkage rigid network resists structural collapse during dehydration, preserving a hierarchical porous architecture that synergistically combines ∇πos with capillary pumping to accelerate water transport beyond the limitations of conventional hydrogels. Consequently, the HRIMP exhibits excellent sorption/desorption kinetics across a wide humidity range, achieving equilibrium water uptake within just 45 and 90 min at 30% and 90% relative humidity (RH), respectively, and releasing 83.4% of adsorbed water within only 29.5 min under one sun irradiation. Leveraging this ultrafast kinetics, we design a continuous cyclic SAWH device that maintains high water productivity (1.07 Lwater kgsorbents–1 day–1) even under cold, dry winter conditions (around 0 °C, 43% RH). This rigid-network design strategy provides a generalizable approach to overcome the inherent mass-transfer limitations of gel-based adsorbents, promoting the practical application of high-performance SAWH systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Physical Chemistry C
·
2026
·
IF 3.4
Xuhui Zheng,Haikuo Lei,Xue Kong,Shibing Wang,Yanli Ruan
All-solid-state lithium–metal batteries (ASSLMBs) that employ poly(ethylene oxide) solid polymer electrolytes (PEO-SPEs) exhibit the potential for attaining high energy densities. However, compared with other solid electrolytes, they present challenges such as low ionic conductivity, limited electrochemical windows, and reduced stability at even higher temperatures. Here, applying zeolitic imidazolate framework-8 (ZIF-8)-modified Li1.3Al0.3Ti1.7(PO4)3 (LATP) as a functional filler, a LATP@ZIF-8 composite solid electrolyte (CSE) is prepared with poly(ethylene oxide) (PEO). The ZIF-8 shell serves as an interfacial bridge to address key issues of PEO-based electrolytes: filler agglomeration, poor compatibility, anion migration, and discontinuous ion transport. This interface engineering strategy, realized through filler surface functionalization, enhances the performance of composite solid-state electrolytes, paving the way toward safer, higher-energy-density batteries. Its porous structure and Lewis acid centers not only promote the dissociation of the lithium salt LiTFSI but also effectively immobilize the TFSI– anion, thereby increasing the lithium-ion transference number to 0.62. The obtained electrolyte, when characterized by EIS, achieved an ionic conductivity of 3.04 × 10–4 S cm–1 at 60 °C, demonstrating a low activation energy of 0.22 eV. When configured in a Li||CSE||LFP assembly, the cell delivers an initial discharge capacity of 146.8 mAh g–1 and retains over 81% of the initial capacity after 400 cycles at 1 C and 60 °C, confirming its exceptional cycling durability.
✓ 已验证
DOI
高影响因子