ChemCatChem
·
2026
·Vol. 18
·期 1
·e01574
·
IF 3.9
Liya Zhou,Hengrui Zuo,Yunting Liu,Chunliu Li,Ying He,Guanhua Liu,Li Ma,Ruxue Feng,Yanjun Jiang
A naturally sourced imine reductase (IRED) was identified from the UniProt database and thoroughly investigated, leading to the identification of an IRED ( Thermostaphylospora chromogena ) typically toward the S -isomer. The mutation E127P/E221A/S236A (denoted as M3) was obtained through combinatorial mutagenesis, which exhibited a wider pH range, significantly improved catalytic activity, and enhanced stability compared to the wild-type Tc IR. M3 demonstrated an enzyme activity of 307.28 ± 3.35 U/g protein and a 7.78-fold increase in catalytic efficiency, clearly outperforming that of Tc IR. A dual enzyme-catalyzed asymmetric synthesis of ( S )-1-methyl-1,2,3,4-tetrahydroisoquinoline (( S )-1-MeTIQ) from 100 mM 1-methyl-3,4-dihydroisoquinoline (1-MeDIQ) was constructed by combining M3 with formate dehydrogenase (FDH, for coenzyme regeneration). This cascade biocatalytic system achieved remarkable results, with a high conversion (> 99%) of 1-MeDIQ and enantioselectivity ( ee value > 98%) of ( S )-1-MeTIQ under optimized reaction conditions. Additionally, this dual-enzyme system was extended to the asymmetric reduction of more cyclic imine substrates, achieving excellent conversion (> 96%) and high ee values > 96%. These findings reveal that M3 is a promising biocatalyst for the efficient, scalable, and stereoselective synthesis of chiral tetrahydroisoquinolines and other chiral N -heterocyclic compounds.
✓ 已验证
产品关联
DOI
高影响因子
ChemCatChem
·
2026
·Vol. 18
·期 2
·e01743
·
IF 3.9
Yunjie Xie,Bowen Xu,Yi Liu,Feng Zeng,Chalachew Mebrahtu
Herein, we present a concept for CO 2 -assisted direct aqueous-phase hydrogenation of sodium acetate to ethanol, offering a salt-tolerant approach that circumvents energy-intensive acidification and simplifies biomass valorization. The reaction was performed over highly dispersed Pt on the CoAlPt (CAP) catalyst, which improves H 2 activation and drives hydrogen spillover, thereby increasing the reactive surface hydrogen species while mitigating excessively strong H adsorption that suppresses activity under alkaline conditions. The CAP catalyst achieved 90.88% ethanol selectivity with a productivity of 3.63 mmol·g −1 ·h −1 at 180°C without CO 2 addition. Introducing CO 2 (0.1 MPa) increased ethanol productivity to 4.92 mmol·g −1 ·h −1 by converting OH − to HCO 3 − and shifting acetate speciation toward molecular acetic acid, which is more readily hydrogenated. The results obtained in this concept study highlight the potential of using CO 2 as a promoter for direct acetate hydrogenation towards a sustainable strategy for converting acetate-rich aqueous streams to ethanol and other value-added products. Graphical CoAlPt (CAP) catalyst enables an efficient aqueous-phase hydrogenation of acetate to ethanol with 90.88% selectivity. Introducing a controlled amount of CO 2 led to a two-way synergistic promotion between acetate and CO 2 hydrogenation, where balanced OH − /HCO 3 − species further enhance ethanol and methane formation.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 26.8
Churui Zhang,Haichao Chen,Jingyuan Huang,Huaizuo Chen,Chuankun Zhang,Xiu Song Zhao
Inorganic salt electrolytes have been explored for developing cold-resistant aqueous energy storage devices. Current research on anti-freezing inorganic salt solutions mainly focuses on the H-bond regulation effects of individual cations or anions. The overall ionic effects (e.g., ion type, concentrations, cation hydration numbers, ion interactions, and ionic associations, etc.) on the anti-freezing properties lack a comprehensive understanding. In addition, crystallization of the salt electrolyte below the solidification point can lead to an abrupt performance failure of the energy storage device. In this work, we study the overall ionic effects of glass-forming aqueous electrolytes for enhancing their anti-freezing properties. It is found that ion pairs with more positive cationic potentials and less negative anionic potentials, cations with large coordination numbers, and anions with large ionic size and multiple H-bond sites are crucial for achieving glass-forming aqueous electrolytes with exceptional anti-freezing performance. Notably, the Ca(ClO 4 ) 2 eutectic electrolyte exhibits a pure glass transition at −122°C and maintains a visible liquid state at −85°C. A supercapacitor cell with a Ca(ClO 4 ) 2 electrolyte is operational at temperatures as low as −80°C. This study provides insightful understandings for designing glass-forming anti-freezing electrolytes with improved adaptability of aqueous energy storage devices under extremely cold conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Xiaofeng Li,Qiuxiang Zhang,Ran Wang,Jinzhen Huang,Jiecai Han,Tai Yao,Xianjie Wang,Sida Jiang,Bo Song
To enable fast sodium ion battery charging in a wide temperature range, the local structures of anode materials must be optimized to reduce the Na + diffusion resistance at the interface and inside the electrode. Guided by theoretical predictions, isotropic ReSe 2 with a 1 T phase crystal structure (1 T ReSe 2 ) is developed herein to exhibit enhanced electrical conductivity for efficient charge transfer compared to the 1 T' ReSe 2 phase. Enabled by its metallic characteristic and longer Re─Se bonds, 1 T ReSe 2 achieves a lower Na + diffusion barrier and lower adsorption energy than 1 T' ReSe 2 , facilitating faster Na + storage reaction kinetics. Operando spectroscopy characterization confirms that the 1 T ReSe 2 electrode can directly produce Na x ReSe 2 without undergoing a significant phase transition. This inhibits volume expansion, leading to improved cycling stability. As a result, 1 T ReSe 2 exhibits good fast-charging performance in a wide temperature range. A capacity of 197 mAh g −1 @20 A g −1 is maintained after 8000 cycles at room temperature, and a capacity of 136 mAh g −1 @1 A g −1 (corresponding to a capacity retention rate of 60%) is retained after 465 cycles at −40°C.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 26.8
Chao Xie,Deng Ke,Shunzi Li,Yuhang Shan,Can Fu,Xingang Ren,Liangpan Yang,Wenhua Yang,Zhixiang Huang
Multi-functional optoelectronic devices that integrate the capacities of neuromorphic processing and photodetection are of pivotal importance for advancing optoelectronic techniques. Here, we present a dual-functional optoelectronic device based on a multi-heterostructure of Cs 3 Cu 2 I 5 /graphene/Ge, which realizes high-performance deep-ultraviolet (DUV) synaptic behavior and self-driven near-infrared (NIR) photodetection simultaneously. On one hand, the device leverages the photogating effect in the Cs 3 Cu 2 I 5 /graphene heterostructure to produce persistent photo-conductivity, emulating synaptic behavior upon DUV light stimulation. Electron trapping by introducing B 4 PyMPM as capture sites significantly promotes spatial divorcement of photocarriers, guaranteeing remarkably improved synaptic characteristics. The utilizations in DUV fingerprint recognition with an accuracy of 97.8%, and optoelectronic reservoir computing with recognition accuracy reaching 100% for three 4-bit numbers are demonstrated. On the other hand, the device utilizes the photovoltaic effect in the graphene/Ge heterostructure to generate photoresponse at zero working bias, enabling self-driven photodetection upon NIR light illumination. The wide-bandgap Cs 3 Cu 2 I 5 functions as an effective NIR anti-reflection layer to induce a strong light trapping effect, giving rise to boosted photoresponse properties. The excellent photoresponse supports the device in performing single-pixel NIR optical imaging. It is believed that this work is inspiring to the design of high-performance multi-functional optoelectronic devices toward integrated and intelligence applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Tao Hu,Yulan Guo,Xiaodong Yi,Ming Zhao,Yan Gao,Hang Lin
Smart multi-stimuli-responsive luminescence materials, which integrate diverse optical functionalities and hold significant promise for cutting-edge optoelectronic applications, have advanced notably in recent years. However, traditional phosphor powders often suffer from instability due to organic binders, limiting their practical utility. This study presents a novel multi-responsive luminescent glass ceramic (GC) based on SrMg 2 Al 6 Si 9 O 30 :Eu 2+ osumilite, developed via an in situ glass crystallization strategy. The material uniquely integrates efficient and stable photoluminescence (PL, quantum yield 76%), persistent luminescence (PersL), thermally stimulated luminescence (TSL), and X-ray-excited radioluminescence (RL, light yield 13 856 photons/MeV) in a single, intrinsically stable matrix. Molecular dynamics simulations reveal that the precursor glass exhibits crystal-like topological configurations, promoting nucleation of the SrMg 2 Al 6 Si 9 O 30 :Eu 2+ phase with a low crystallization activation energy (226.7 kJ/mol). The GC demonstrates exceptional thermal stability and robust performance in applications: high-security anti-counterfeiting via dynamic multi-mode (PL/PersL/TSL) information encoding, and X-ray detection with 8 lp/mm spatial resolution, outperforming commercial scintillators like BGO. These findings establish a new paradigm for designing stable, multi-responsive luminescent materials, paving the way for next-generation integrated optical devices.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Lu Zhou,Xinming Fan,Haojie Du,Gaoqiang Mao,Qian Wang,Yufang Chen,Xueyi Guo,Dawei Yu
This paper introduces a novel electrolyte additive, 3,5-bis(trifluoromethyl)phenyl isocyanate (3,5-Bis(CF 3 )PhNCO), designed to mitigate interfacial instability and structural degradation of single-crystal LiNi 0.92 Co 0.06 Mn 0.02 O 2 cathodes under 4.6 V high-voltage cycling. Distinct from conventional monofunctional additives, 3,5-Bis(CF 3 )PhNCO integrates strongly reactive -NCO groups and electronegative -CF 3 groups, enabling a unique synergistic working mechanism. The -NCO moiety scavenges moisture and neutralizes acidic species (e.g., HF) to suppress electrolyte hydrolysis, while the -CF 3 groups enhance hydrophobicity and induce preferential oxidative decomposition for the formation of a robust cathode-electrolyte interphase (CEI). Driven by this synergistic effect, the additive constructs a ∼20 nm nitrogen-rich CEI layer, which effectively alleviates uneven Li + deposition, stabilizes the valence states of transition metals, and inhibits microcracking of the NCM92 cathode-effects validated by focused ion beam (FIB) 3D reconstruction, X-ray absorption fine structure spectroscopy (XAFS), and COMSOL Multiphysics simulations. Electrochemically, with 2 wt.% additive incorporation, the cells achieved an excellent capacity retention of 87.08% after 150 cycles at a 0.5 C rate, while full cells maintained 86.67% of their capacity after 1400 cycles at 1 C. This work establishes theoretical and experimental frameworks for multifunctional additive design, offering critical guidance for developing high-energy-density, long-life lithium-ion battery cathodes.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Optical Materials
·
2026
·Vol. 14
·期 5
·e01740
·
IF 7.2
Um-e Kalsoom,Shakir Hussain Chaudhry,Jiaqing Guo,Abida Parveen,Yueshu Feng,Liwei Liu
The study reveals that these nanoparticles exhibit highly tunable photoluminescence (PL), with distinct blue, red, and near-infrared emissions that are highly sensitive to temperature changes. For the first time, the temperature-dependent characteristics of PL emissions for optical thermometry behavior among 300–500 K for particular nanoparticles are also investigated. The temperature-dependent fluorescence intensity ratio (FIR) technique, leveraging phonon-mediated apparent temperature-dependent coupling among Tm 3+ states, is employed to calculate the absolute sensitivity (S a ) and relative sensitivity (S r ) of particular nanoparticles. The results indicate high S a values of up to 0.0108 K −1 for sample A and 0.0017 K −1 for sample B across the given temperature range. Sample A exhibits a higher S r of 0.0122%K −1 at low temperatures, while decreasing to 0.0046%K −1 at higher temperatures, while sample B maintains a relatively consistent value over the same temperature range. These results highlight the potential of the synthesized nanoparticles as an effective optical thermometric probe. The Yb 3+ concentration directly modulates energy transfer efficiency and temperature sensitivity by influencing both the rate of energy transfer to Tm 3+ and the extent of nonradiative losses. Optimizing Yb 3+ content is thus crucial for achieving high sensitivity and stability in PL-based optical thermometry, positioning Yb 3+ /Tm 3+ co-doped K 0.3 Bi 0.7 F 2.4 nanoparticles as promising candidates for advanced noncontact temperature sensing applications.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Tianxiang Yang,Menglong Sun,Qing Pang,Guangping Yang,Haijiang Yang,Rou Feng,Zhiguo Wang,Weidong Tian,Abdullah Nasir,Sining Yun
Facilitating rapid carrier transport through interfacial electron modulation and nanostructure construction is an effective strategy for designing efficient and stable carbon-based electrodes, but it still poses significant challenges. Here, we propose a phase-segregation engineering to prepare two binary metal selenide heterojunctions on 3D N-doped carbon cubes, CoSe 2 /FeSe 2 @NDCC (CS/FS@NDCC) and NiSe 2 /FeSe 2 @NDCC (NS/FS@NDCC), by utilizing different metal-based Prussian blue analogs as sacrificial templates. Based on the large specific surface area and abundant pores provided by the 3D nanocube structure, as well as the electron-rich field effect generated by the self-driven transfer of electrons at the inhomogeneous interfaces of binary selenides, the transport and extraction of carriers at the composite interface are significantly enhanced. When applied to the electrodes of carbon-based perovskite solar cells (C-PSCs) without a hole transport layer, CS/FS@NDCC and NS/FS@NDCC achieved power conversion efficiencies (PCEs) of 14.11% and 12.82%, respectively. Similarly, in Liquid-junction solar cells, CS/FS@NDCC and NS/FS@NDCC demonstrated PCEs of 8.91% and 8.09%, respectively. This research provides both theoretical and experimental support for the development of highly efficient and stable carbon-based heterojunction electrodes for new energy conversion devices.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Mingjie Lei,Yi Zhao,Xiujuan Sun,Yuan Pan,Yadong Liu,Jiayu Kang,Diye Wei,Luyi Zou,Yong Pei
Electrocatalytic urea oxidation reaction (UOR) holds great promise in green energy conversion and pollutant degradation with low energy-consumption. Herein, Fe-NiTe/NiSe 2 nanosheets array with super-hydrophilic/aerophobic surface and enhanced built-in electric field is constructed. The surface hydrophilic/aerophobic properties enabling rapid bubble nucleation and efficient detachment, liberating covered active sites, thus improving the surface adsorption kinetics of urea molecular and OH − . Moreover, Fe incorporation accelerates charge transfer and modulates the built-in electric field at the NiTe/NiSe 2 heterojunction interface. This reduces the surface reconstruction potential and optimizes the occupancy of hybrid anti-bonding (d-δ)* orbitals, leading to the formation of electron-rich region (Fe-NiTe) and electron-deficient region (Fe-NiSe 2 ), which preferentially adsorbs the electron-withdrawing (C═O) and electron-donating (─NH 2 ) groups of urea, respectively, thereby optimizing the adsorption energy of urea molecules. Therefore, the Fe-NiTe/NiSe 2 heterojunction exhibits excellent alkaline UOR performance, requiring only 1.447 V RHE to deliver a current density of 100 mA cm −2 , which it can maintain for over 90 h. The Fe-NiTe/NiSe 2 (+) ∥ Pt/C (-) urea electrolyzer can maintain stable for 150 h at 100 mA cm −2 . This work offers a macro- and microscopic coupling engineering strategy to address the surface and intrinsic properties for alkaline UOR, holding significant practical value for advancing energy-efficient hydrogen production and wastewater treatment.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Optical Materials
·
2026
·
IF 7.2
Zikang Yu,Mingxiang Chen,Jiuzhou Zhao,Hongjin Zhang,Sifan Zhuo,Shisheng Lin,Yang Peng,Daqin Chen
High-power laser-driven projection display demands that the phosphor converters possess excellent thermal handling capacity and stably efficient light output; however, simultaneously enhancing opto-thermal performance is still full of challenges. Herein, a novel universal architecture of phosphor-in-glass film (PiGF) on sapphire substrate with MgO-in-glass (MiG) layer coated on the other side is developed. Owing to the high refractive index of 1.74 and thermal conductivity of 50 W·m −1 ·K −1 of MgO, the MiG layer not only recycles the backscattering light but also improves the heat dissipation, leading to synergistically enhanced opto-thermal properties of PiGF. Taking Y 3 Al 5 O 12 : Ce 3+ (YAG) PiGF-sapphire-MiG (YSM) as a representative example, the optimized composite enables a high luminous flux (LF) of 5515 lm and luminous efficiency (LE) of 196.9 lm·W −1 at a luminescence saturation threshold (ST) of 28 W·mm −2 . After introducing red-emitting CaAlSiN 3 : Eu 2+ (CASN) component, the YAG-CASN PiGF-sapphire-MiG (YCSM) converter yields warm white light with a color rendering index (CRI) up to 90.6, enabling to realization of more details and more vivid color rendition of the laser projection system. This study provides a cost-effective, easy-prepared, and universal strategy for advancing high-efficiency PiGF-based color converters and high-power laser-driven applications.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Guangsheng Zhang,Lishuai Zong,Jianhua Han,Changhong Xiao,Xiaoxu Wang,Yibo Wang,Haoran Liu,Lingmei Jiang,Xigao Jian,Jinyan Wang
With the advancement of the Internet of Things (IoT), 3D printing has emerged as a versatile fabrication platform for constructing 3D conformal electronics. However, developing photosensitive resins compatible with 3D printing that possess high thermal and moisture stability alongside low dielectric loss remains a challenge for fabricating complex, curved 3D circuits. Herein, a fluorine-rich poly(aryl ether) photosensitive material system, synthesized via quaternary copolymerization and blended with thiols to formulate inks for direct ink writing (DIW) is presented. The optimized inks demonstrate high thermal stability (glass transition temperature up to 247°C), robust mechanical strength (tensile strength of 69 MPa and elongation at break of 17%), and favorable dielectric properties (dielectric constant of 2.86 and dielectric loss of 0.0063 at 10 GHz). Leveraging the advantageous properties of the poly(aryl ether) photosensitive inks, it is successfully fabricated various functional, complex 3D structures with high thermal and moisture stability, including high-curvature conformal circuits. Furthermore, a 3D-printed high-frequency X-band antenna operating at 10.2 GHz, highlighting the practical applications of these fluorine-rich resin materials for advanced IoT devices is demonstrated. These results present a promising material concept and fabrication strategy for producing complex 3D-printed circuits applicable to a wide range of 3D conformal electronic devices.
✓ 已验证
产品关联
DOI
高影响因子