FOOD HYDROCOLLOIDS
·
2026
·
IF 13.8
Mingzhu Liu,Xuelu Ding,Shan Yu,Qin Cen,Wenkang Hu,Zhiru Dai,Huaimao Tie,Xuefeng Zeng,Yuejun He
Okara is a high-dietary-fiber byproduct of soybean processing with low utilization rates. Its insoluble dietary fiber (IDF) possesses significant nutritional value, yet its natural dense structure and limited interfacial activity constrain its application in food systems. To enhance its functionality, this study modified IDF using food-grade K 2 CO 3 to improve its structural and interfacial properties. The interfacial assembly behavior and stabilization mechanism of the modified fiber (M-IDF) in Pickering emulsions were investigated. Results showed that K 2 CO 3 treatment altered IDF's microstructure, reducing crystallinity to 17.32%. and significantly increased the zeta potential of M-IDF (−20.83 mV), thereby improving its water retention capacity, oil adsorption ability, and wetting properties. Consequently, M-IDF Pickering emulsions constructed with a 20% oil phase formed smaller, better-dispersed droplet structures and exhibited higher emulsifying activity and emulsion stability. Simulated gastrointestinal digestion experiments further demonstrated that the dense particle layer formed by M-IDF at the lipid droplet interface effectively inhibits droplet aggregation and lipase adsorption. This resulted in a free fatty acid (FFA) release rate of only 53.07% at 120 min, showcasing excellent lipid sustained-release capability. This research significantly enhances the structural and interfacial functionality of Okara IDF, positioning it as a promising natural solid emulsifier. It also provides a novel pathway for developing stable emulsified foods, fat-controlled foods, and functional delivery systems.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Qiao Guo,Yongchao Yao,Jipeng Xiao,Xinyu Lu,Yiyuan Pu,Ran Li,Zhuo Zhang,Penghai Tang,Yuchen Jiang,Jianbin Luo
Cascade-targeting mannose-HMSNs enable dual macrophage and intracellular MRSA targeting. • pH/NIR dual-responsive nanoparticles promote lysosomal escape and drug release. • Photothermal IR780 and curcumin synergistically eradicate intracellular MRSA in vivo. • Curcumin-modulated M1/M2 polarization attenuates inflammation and enhances antibacterial efficacy. Intracellular bacterial infections caused by methicillin-resistant Staphylococcus aureus (MRSA) pose serious threat to human health due to immune evasion and antibiotic resistance. Here, a new integrated drug delivery system (DDS) based on hollow mesoporous silica nanoparticles (HMSNs) with cascade-targeting, acidic/NIR dual responsive, photothermal antibacterial and immune modulation activities is reported. Mannose was grafted onto HMSNs through Schiff-base bond, resulting in Man-HMSNs. IR780 and curcumin (Cur) were coloaded into Man-HMSNs which resulted in the integrated drug delivery system, IR780/Cur@Man-HMSNs. The nanoparticles are specifically recognized and internalized by macrophages via mannose receptor recognition. Crucially, the acidic phagolysosome microenvironment triggers Schiff base cleavage to expose primary amine groups, achieving surface charge reversal from negative to positive that simultaneously promotes intracellular bacterial targeting through electrostatic adhesion and cargo release a cascade-targeting mechanism distinguishing this work from conventional HMSN platforms. Under NIR irradiation, photothermal and photodynamic effects directly eradicate intracellular MRSA while accelerating drug release. Cur enhances immune modulation by upregulating the M1/M2 polarization, which further promotes antibacterial capacity. In vitro, IR780/Cur@Man-HMSNs exhibits 92% MRSA biofilm eradication efficiency under acidic conditions. In vivo, it reduces the total bacterial burden to 2.45 log₁₀ CFU and achieves efficient intracellular MRSA elimination. IR780/Cur@Man-HMSNs show better intracellular bacteria elimination efficiency both in vitro and in vivo, compared with those of free IR780/Cur and individual IR780 or Cur loaded DDS. Therefore, the photothermal antibacterial and immune regulation integrated nanosystems with cascade targeting and acidic/NIR dual responsive properties provides a new method for treating intracellular bacterial infections. By mannose modification and co-loading of IR780 and curcumin, a multifunctional IR780/Cur@Man-HMSNs nanosystem was constructed for intracellular MRSA infection therapy. The nanosystem enables macrophage-mediated and intracellular bacteria cascade-targeting, undergoes surface charge reversal in acidic phagolysosomal microenvironments to promote bacterial interaction and lysosomal escape, and exhibits NIR-triggered drug release and photothermal antibacterial effects. Moreover, curcumin-mediated modulation of macrophage M1/M2 polarization alleviates inflammation and synergistically enhances antibacterial therapeutic efficacy. Download: Download high-res image (142KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
·
2026
·
IF 5.9
Yaru Wen,Jihao Liu,Yuxin Tang,Junjie Wang,Qianqian Dong,Yuhao Li,Baoning Zhu,Yiming Liu,Jinghua Liu,Xiong He,Yao Lu
A Ti 4+ -doped NiFe-LDH was employed as an electrocatalyst. • It requires overpotentials of 243 and 263 mV at 50 mA cm −2 in 1 M KOH and seawater. • Ti 4+ doping modulates the LDH electronic structure, activating the lattice oxygen mechanism. • This modulation significantly improves both electrocatalytic activity and long-term stability. The oxygen evolution reaction (OER) is kinetically sluggish and unstable, severely limiting its efficiency in water electrolysis, particularly in seawater. Here, we report the growth of Ti-doped NiFe layered double hydroxide (LDH) nanosheets on nickel foam (NF) via a one-step hydrothermal synthesis. The introduction of high-valent Ti 4+ cations effectively modulates the local electronic configuration of the NiFe-LDH host, thereby tending to promote the lattice oxygen mechanism (LOM) and fundamentally accelerate the OER kinetics. Consequently, the optimal Ti 0.1 NiFe-LDH/NF catalyst exhibits an overpotential of only 243 mV at 50 mA cm −2 in 1 M KOH, with a Tafel slope of 63.4 mV dec −1 . Importantly, it demonstrates exceptional operational durability, maintaining a current density of 50 mA cm −2 for more than 100 h with a minimal potential increase of just 7 mV. In alkaline seawater, the Ti-doped catalyst shows superior activity and corrosion resistance relative to its undoped counterpart, underscoring its potential for direct seawater electrolysis. This study elucidates the critical role of cation doping in activating the LOM pathway through optimization of the electronic configuration, and offers an effective strategy for developing high-performance and highly stable OER electrocatalysts for both freshwater and seawater splitting. Download: Download high-res image (251KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CARBON
·
2026
·
IF 12.7
Yongmei Luo,Junqi Li,Wei Liu,Yang Li,Jiangang Zhang,Yuan Luo
Free-standing N -doped carbon nanofibers were successfully fabricated. • Carbonization temperature tailors pore structure and nitrogen retention. • Porous NPCNFs outperform hollow NHPCNFs in capacitive performance. • NPCNF-800 exhibits superior capacitance and rate performance. • The flexible symmetric supercapacitor delivers high energy density. Despite the immense potential of electrospun carbon nanofibers in supercapacitor applications, precisely engineering their hierarchical pore structures and surface chemistry to maximize active sites remains a formidable challenge. In this study, nitrogen-doped porous and hollow porous carbon nanofibers(NPCNFs/NHPCNFs) were synthesized via the electrospinning of polyacrylonitrile (PAN), poly(methyl methacrylate) (PMMA), and zinc acetate dihydrate (ZAH), followed by a controlled carbonization process. The fiber morphology, pore architecture, nitrogen doping, and degree of graphitization were systematically tuned by varying the carbonization temperature to exploit the differential thermal decomposition of PMMA and ZAH. Electrochemical evaluations reveal that the NPCNFs exhibit higher capacitance than their hollow counterparts, with capacitive performance primarily depending on mesopore volume and specific surface area. The optimized NPCNF-800 electrode delivers a high specific capacitance of 375 F g −1 at 0.5 A g −1 , excellent rate capability with 88.5% capacitance retention at 10 A g −1 and outstanding cycling stability (95.1% retention after 10000 cycles). The enhanced performance is attributed to the synergistic effects of nitrogen doping, enlarged mesopore volume, improved electrical conductivity and efficient ion/electron transport within the one-dimensional hierarchical porous framework. Furthermore, a symmetric flexible supercapacitor assembled using the optimized electrode achieves a maximum energy density of 43.4 Wh kg −1 at 0.3 kW kg −1 and maintains 33.2 Wh kg −1 at 12 kW kg −1 while preserving excellent mechanical flexibility. Download: Download high-res image (400KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Fengjiao Zhou,Can Peng,Shumin Liu,Xingyou Zhou,Yuekai Hu,Aihua Xu,Xiuying Liu,Shuaiqi Zhao,Xiaoxia Li
A dynamically reversible oxygen vacancy regeneration mechanism is established in Fenton-like catalysis. • A synergistic oxygen vacancy–redox feedback loop enables intrinsic self-sustaining catalytic activity. • The first experimentally validated demonstration of full oxygen vacancy regeneration under operational conditions. Designing heterogeneous Fenton-like catalysts that combine high activity with long-term stability remains a fundamental challenge in advanced oxidation. Here, we report an ethanol dehydrogenation–mediated rapid quenching–reduction strategy to construct a mixed copper–iron oxide catalyst (MCFO-Q) with regenerable oxygen vacancies. During quenching, transient thermal energy drives in situ ethanol dehydrogenation, injecting electrons into the lattice and selectively removing surface lattice oxygen. This yields a high density of well-defined surface oxygen vacancies while reducing Fe 3+ /Cu 2+ to more active Fe 2+ /Cu + states. Compared to the slow-cooled control, MCFO-Q shows higher vacancy concentration, enhanced reducibility, and superior electron-transfer capability—confirmed by spectroscopic and electrochemical characterization. In the MCFO-Q/PMS system, levofloxacin degrades by 95% in 30 min (k obs = 0.32 min −1 ), 1.78-fold faster than unquenched MCFO. Crucially, after five cycles of deactivation, MCFO-Q fully regains its initial vacancy density and activity following a single mild re-quenching. Overall, ethanol-mediated quenching establishes a dynamic feedback loop linking vacancy regeneration with transition-metal redox cycling—enabling intrinsic, sustained catalytic performance.
✓ 已验证
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2026
·
IF 9.2
Yujing Zhang,Ziyan Yang,Pengwei Lei,Yuqi Zhang,Jiao Ma,Fumei Wang,Lina Liu,Zhikun Zhang
Toluene steam reforming (TSR) is an effective route for converting biomass tar model compounds into H 2 -rich syngas, but the practical application of Ni-based catalysts is limited by Ni sintering and coke deposition under high-temperature reforming conditions. In this work, municipal solid waste (MSW) incineration bottom ash (IBA) was converted into a waste-derived catalyst support through a CaO extraction-residue passivation route, and Ni-based catalysts were subsequently prepared for TSR. Considering the trace amount of Fe originally present in the IBA-derived support and the known promotional effect of Fe on Ni-based reforming catalysts, additional Fe was introduced to regulate the Ni-Fe interactions and optimize the catalytic structure. A series of xFe-15Ni/MS 15 Ca 85 catalysts were synthesized and evaluated for toluene steam reforming at 850 °C with a S/C ratio of 3. Among them, 7.5Fe-15Ni/MS 15 Ca 85 exhibited the best catalytic performance, achieving a toluene conversion of 96.77%, an H 2 yield of approximately 77%, and stable operation for 45 h on stream. Characterization results suggest that appropriate Fe addition promoted the formation of Ni-Fe alloy species, improved the dispersion of active metal species, and optimized the pore structure, thereby increasing the accessibility of active sites. Moreover, Fe incorporation increased the relative proportion and potential reactivity of surface lattice oxygen species, which may facilitate the oxidation of carbonaceous intermediates and suppress coke accumulation. This study suggests that IBA can be upgraded into an effective support for Ni-based TSR catalysts and provides a feasible strategy for coupling solid-waste valorization with tar reforming for syngas production.
✓ 已验证
DOI
PubMed
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Kun Zhao,Xin Gong,Qinglan Li,Jingyi,Mingxia Lin,Xiping Cui,Suqing Zhao
A nanozyme-amplified immunoassay was developed for Helicobacter pylori detection. • Avian-derived IgY and scFv enabled a dual-recognition sandwich format. • Porous PtCu nanozymes provided stable colorimetric signal amplification. • The assay achieved an LOD of 1.91 × 10 3 CFU/mL with good selectivity. • The method supports sensitive screening in matrix-rich samples. Helicobacter pylori ( H. pylori ) is a major gastric pathogen associated with chronic gastrointestinal diseases, creating a need for simple and reliable analytical methods for its detection, particularly in complex sample matrices. Herein, we developed a nanozyme-amplified colorimetric sandwich immunoassay by integrating a unified avian-derived dual-recognition format with porous PtCu nanozyme-based catalytic signal amplification. Egg yolk-derived immunoglobulin yolk (IgY) was used as the capture antibody, while a phage display-derived single-chain variable fragment (scFv) selected after chicken immunization and biopanning was assembled onto porous PtCu nanomicrobeads (PtCu NPMs) as the catalytic detection probe. This design combines complementary IgY/scFv recognition with the catalytic robustness of porous PtCu nanozyme for sensitive H. pylori detection. Under optimized conditions, the assay achieved a limit of detection of 1.91 × 10 3 CFU/mL and showed good selectivity toward H. pylori . The method was further evaluated in saliva, milk, water, and vegetable juice samples, where satisfactory recoveries were obtained at moderate-to-high spiking levels. These results indicate that the proposed assay is suitable for sensitive screening and semi-quantitative analysis of H. pylori in complex matrices, and provides a practical strategy for combining avian-derived recognition reagents with nanozyme-based signal amplification in pathogen detection. Scheme 1 . Schematic illustration of the PtCu NPMs@scFv-based nanozyme-amplified sandwich immunoassay for H. pylori detection. (A) Selection of avian-derived scFv against H. pylori by hen immunization and phage display. (B) Construction of the PtCu NPMs@scFv probe through electrostatic assembly on PtCu NPMs. (C) Proposed detection mechanism: egg-yolk-derived IgY captures H. pylori on the solid phase, scFv recognizes cell-surface antigenic determinants of H. pylori , and the resulting IgY H. pylori -PtCu NPMs@scFv sandwich complex enriches porous PtCu nanozyme at the interface, thereby catalyzing the TMB/H 2 O 2 reaction to generate an amplified colorimetric signal. Download: Download high-res image (153KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2026
·
IF 4.3
Yanqing Wang,Dongchen Guo,Zhiping Fang,Min Fan,Zhenhao Yan,Fuling Guo,Wangchao Chen,Yuan Gao,Tongqi Ye,Chengwu Shi
Antimony sulfide (Sb 2 S 3 ) is a promising absorber for photovoltaics operating under both outdoor and indoor illumination due to its suitable bandgap and excellent photostability. However, during chemical bath deposition, the unsynchronized hydrolysis and sulfidation of Sb 3+ species induce excessive homogeneous nucleation, leading to amorphous particles and ultimately films with small grains, high grain boundary density, and low crystallinity. To address this issue, an rGO-regulated deposition strategy is developed. The oxygen-containing functional groups on rGO can interact with Sb 3+ species through coordination and electrostatic interactions, thereby modulating their local availability and reaction kinetics. This suppresses homogeneous nucleation and promotes substrate-guided growth, yielding Sb 2 S 3 films with [ hk 1] preferred orientation, enlarged grains, reduced defects, and improved carrier transport. As a result, the photovoltaic device with rGO-regulated achieves a PCE of 7.61% under AM 1.5G illumination (compared to 7.15% for the conventional CBD device) and 17.64% under 3000 K, 1000 lux warm white LED illumination. This work highlights Sb 2 S 3 as a versatile absorber for outdoor–indoor photovoltaics and provides a pathway for regulating solution-phase crystallization.
✓ 已验证
DOI
高影响因子
FOOD RESEARCH INTERNATIONAL
·
2026
·
IF 8.8
Xiaohong Guo,Ziqiang Qin,Yongrui Ti,Di Wu,Kunsong Chen
Freezing and salting out enhanced mechanical properties of Gel/PVA hydrogel . • Tannic acid gave both high mechanical enhancement and potent antimicrobial activity. • 10% TA enhanced Gel/PVA hydrogel (GP10T) had superior Young's modulus (7.74 MPa). • Hydrogels loaded with TA inhibited the growth of Botrytis cinerea. GP10T preserved strawberry hardness without affecting color, weight, or TSS. Hydrogels have great application potential for food preservation due to their excellent biocompatibility and functional tunability, but it is difficult to easily balance mechanical strength and functionality. In the present study, gelatine (Gel) and polyvinyl alcohol (PVA) were used as substrates, and tannic acid (TA) was introduced to construct a composite hydrogel by freezing-salting out method. The mechanical, antimicrobial, and strawberry preservation performance of TA-loaded hydrogels was systematically evaluated. The results revealed that freeze-salting out promoted hydrogen bonding crosslinking and physical entanglement between PVA and Gel chains, while TA further optimized the microstructure through intermolecular interactions. Specifically, the hydrogel with 10% TA (GP10T) was identified as the optimal formulation. It achieved a compressive strength of 7.74 MPa, a Young's modulus of 1.04 MPa, and an energy dissipation rate of 29.14%. Rheological analysis revealed a gel-sol transition point delayed to approximately 900% strain. Additionally, it exhibited an equilibrium swelling ratio of 137.36% and a controlled degradation rate of 72.82% within 30 days. The GP10T hydrogel inhibited the growth of Botrytis cinerea and effectively maintained the firmness, color and other quality parameters of strawberries during storage. The developed GP10T hydrogel shows promising prospects for fruit preservation applications. Download: Download high-res image (147KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CORROSION SCIENCE
·
2026
·
IF 10.3
Xiaoyu Jiao,Junhong Jia,Runze Wei,Rui Deng,Jie Yang,Nairu He,Yun Shi,Dongsheng Li
The role of molybdenum (Mo) in the hot-corrosion behavior of HVOF-sprayed Cr 3 C 2 -NiCr coatings was systematically investigated in Na 2 SO 4 -NaCl (75–25 wt%) molten salt at 700–800℃. The results reveal a clear Mo-content-dependent dual effect. At an optimal addition of 3 wt% Mo, the coating exhibited the highest corrosion resistance, as evidenced by the lowest parabolic rate constant and the highest apparent activation energy (∼75 kJ·mol⁻ 1 ). Microstructural and phase analyses (SEM, EBSD, and XRD) indicated that this enhancement was attributed to the formation of a continuous and dense scale dominated by Cr 2 O 3 -NiCr 2 O 4 , with trace NiMoO 4 providing grain-boundary pinning. In contrast, excess Mo (5 wt%) promotes the formation of low-melting-point Na 2 MoO 4 and volatile MoO 3 , leading to scale disintegration and accelerated corrosion. Thermodynamic analyses further confirmed that the optimal Mo content stabilizes protective oxides and suppressing detrimental chlorination pathways. This study clarifies the mechanistic basis of the dual role of Mo and establishes a composition-property relationship for the design of corrosion-resistant coatings in aggressive molten-salt environments.
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Yufei Yang,Leqi Chou,Zhuocheng Gan,Zhiqi Wen,Wenhao Zhang,Bo Wei,Chunyou Mao,Xiangbin Zeng
Tungsten disulfide (WS 2 ), a representative transition metal dichalcogenide (TMDC), has emerged as a pivotal material for logic, optoelectronic, and flexible electronics owing to its exceptional properties. However, cumbersome synthesis protocols and multi-step fabrication processes severely hinder its practical implementations. Herein, we report a direct, rapid, and scalable approach for synthesizing large-area WS 2 thin films utilizing an excimer laser (λ= 248 nm). By employing a machine learning (ML) framework to optimize the laser processing parameters, the controllable synthesis of WS 2 is achieved with negligible thermal accumulation. Furthermore, we successfully fabricated WS 2 -based field-effect transistors (FETs) and flexible strain sensors. Notably, the FETs exhibit a remarkable I on /I off current ratio of 10 6 and an electron mobility of 6.72 cm 2 /V∙s. This methodology not only facilitates the large-area synthesis and device integration of WS 2 but also presents a versatile pathway for developing micro/nano-devices based on a broad spectrum of TMDCs and other functional materials. Download: Download high-res image (221KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2026
·
IF 15.6
Ge Wang,Guosheng Duan,Zhiye Yao,Leilei Sun,Sinan Zheng,Zhean Bao,Hanwei Hu,Dinghao Chen,Xinyuan Kong,Dan Li,Yang Wang,Zhizhen Ye,Jingyun Huang
Zinc dendrite growth, hydrogen evolution reaction, and corrosion reaction severely impede the commercialization of zinc-metal batteries. In contrast to previous studies focusing on the first two detrimental issues, corrosion induced by dissolved oxygen (DO) is frequently neglected. With the self-deoxygenation effect of carbonic dihydrazide (CHZ) as the core mechanism, this work elaborates on its synergistic regulation of the interfacial environment, solvation structure, and deposition behavior as a multifunctional additive. CHZ spontaneously captures DO and suppresses the hydrogen evolution reaction, thereby mitigating side reactions. Benefiting from the preferential adsorption of CHZ at the zinc metal interface and the generation of CO 2 through its self-deoxygenation effect, the in situ formation of a ZnCO 3 -dominated solid electrolyte interphase (SEI) layer is promoted. Furthermore, as a bidentate ligand, CHZ exhibits strong coordination with Zn 2+ , which not only reconstructs the solvation structure but also regulates the zinc deposition kinetics, ensuring uniform and compact zinc deposition. Consequently, the CHZ-containing Zn||Zn symmetric cell exhibits extraordinary cycling stability of 1250 h under 10 mA cm −2 and 5 mAh cm −2 . The Zn||Cu asymmetric cell maintains a high Coulombic efficiency of 99.86% over 3350 cycles. This work provides new insights into enhancing the electrochemical stability of zinc anodes through a synergistic strategy. Rooted in the self-deoxygenation effect, the multifunctional additive carbonic dihydrazide captures dissolved oxygen and enables the in-situ formation of ZnCO 3 -dominated solid electrolyte interphase (SEI) layer, achieving 1250 h of cycling stability at 10 mA cm −2 /5 mAh cm −2 . Download: Download high-res image (250KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子