EUROPEAN POLYMER JOURNAL
·
2026
·
IF 6.8
Tong Yan,Hao Jiang,Jingyue Wang,Zhikun Wang,Shuangqing Sun,Songqing Hu
Soft devices that convert mechanical stimuli into electrical outputs are central to wearable electronics, where mechanical signals can be captured either as continuous deformation-dependent resistance changes or as contact-triggered triboelectric voltage outputs. However, their operational lifetime is often limited by mechanical fatigue and accidental damage that introduce microcracks, causing signal drift and eventual device failure. To address this, we report a self-healing ionogel based on weak reversible ionic and hydrogen-bonding interactions. The ionogel exhibits a tensile strength of 5.58 MPa and a toughness of 17.43 MJ/m 3 , and achieves a healing efficiency of 92.2% after 12 h at 60 °C. The ionogel can be directly used as piezoresistive strain sensors with stable and distinguishable resistance responses to diverse deformations, and recovers sensing performance close to the pristine state after healing. In addition, the ionogel can also function as a self-powered voltage-signal sensor, delivering distinct contact-triggered voltage signals against different counter materials. This work provides a generalizable strategy for constructing robust, self-healing ionogel-based soft devices for mechanical signal monitoring.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yunfei Li,Pengcheng Zhao,Jiabao Huang,Luocai Yi,Chengsi Hu,Ying Li,Liu Yang,Qingjun Chen
A single-atom alloy with isolated Os in NiCu was constructed. • Os promotes water dissociation on Ni sites and optimizes hydrogen binding. • Reconfiguration of interfacial water yields a free-water-rich environment. • The catalyst delivers excellent performance and durability in an AEMWE device. Developing efficient and durable alkaline hydrogen evolution reaction (HER) catalysts is essential for sustainable hydrogen production via anion-exchange membrane water electrolysis (AEMWE) yet remains challenging. Herein, we report a single-atom alloy catalyst comprising atomically dispersed Os on the NiCu alloy array support (Os SA/NiCu), where the unique coordination environment engenders strong electronic interactions that synergistically enhance catalytic activity. The optimized catalyst achieves an overpotential of only 14 mV at 10 mA cm −2 and operates stably for over 2000 h at 200 mA cm −2 . Combined in situ spectroscopy and theoretical calculations reveal that the Os incorporation facilitates water dissociation on adjacent Ni sites, optimizes hydrogen binding energetics, and reconstructs the local interfacial water structure, thereby accelerating alkaline HER kinetics. When employed as the cathode in an AEMWE device, Os SA/NiCu delivers a cell voltage of 1.76 V at an industrial-relevant current density of 1 A cm −2 at 80 °C, with exceptional stability exceeding 500 h. This work establishes single-atom alloy engineering as an effective strategy to enhance noble metal utilization and intrinsic activity toward durable AEMWE systems. A single-atom alloy catalyst comprising atomically dispersed Os on a NiCu alloy array support was synthesized. In situ spectroscopy and DFT reveal that Os incorporation accelerates alkaline HER by synergistically modulating water dissociation, hydrogen binding, and interfacial water structure. Consequently, the catalyst achieves 1 A cm −2 at 1.76 V and operates stably at 0.5 A cm −2 for 1000 h in an AEMWE device. Download: Download high-res image (127KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Jinfeng Li,Dandan Zhang,Qianwen Wang,Zhigang Li,Bo Tian,Nan Zhang,Haifeng Gu,Hongtao Zhao
The practical application of metal-organic frameworks (MOFs) for uranium extraction from acidic nuclear wastewater is critically hindered by the inherent trade-off between adsorption capacity and structural stability under highly acidic conditions. Inspired by biological cell membranes and their selective permeabilities, a series of bifunctional MOF adsorbents were synthesized via gamma-ray initiated graft polymerization (RIGP) by regulating the surface density of uranyl-binding phosphonic acid (-PO₃H₂) and acid-resistant phosphonate ester (-PO₃Et₂) groups, derived from vinylphosphonic acid (VPA) and diethyl vinylphosphonate (DEVP), respectively. It was found that the -PO₃H₂ groups provide specific coordination sites for U(VI), while the -PO₃Et₂ groups formed a hydrophobic barrier against H₃O + . This synergistic effect enabled the optimal balance between high adsorption performance and exceptional acid stability. The optimal adsorbent, NiBTAB-vinyl@P4E1 (where P and E denote vinylphosphonic acid and diethyl vinylphosphonate, respectively, with a feeding ratio of 4:1), exhibited a considerable adsorption capacity towards U(VI) in 1 M HNO 3 solution, accompanied by a fast adsorption rate within 50 min. NiBTAB-vinyl@P4E1 retains its structural integrity even after 24 h of soaking in 3 M HNO₃ with a nickel leaching percentage below 5%, demonstrating outstanding acid resistance. This work provides a gradient protection strategy for designing stable and efficient adsorbents for uranium removal under strongly acidic conditions.
✓ 已验证
DOI
高影响因子
MINERALS ENGINEERING
·
2026
·
IF 6
Muyuan Zeng,Wenbo Li,Xinyu Zhang,Jialin Xu,Siyuan Yang,Jie Liu,Jue Wang
Cross-linked corn starch (CLCS) significantly enhances the magnetic capture rate of –20 μm hematite. • The combination of CLCS with a high-gradient magnetic field further increases the size of the agglomerate. • The size and compactness of CLCS-induced aggregates jointly determine their magnetic capture efficiency. High-gradient magnetic separation (HGMS) is widely used for weakly magnetic iron ores, yet its efficiency declines sharply for ultrafine hematite due to low magnetic responsiveness and poor capture probability. This study investigates how cross-linked corn starch (CLCS)-induced bridging aggregation enhances magnetic capture behavior in HGMS. The effects of slurry pH, CLCS dosage, and magnetic field intensity on aggregation behavior and magnetic capture efficiency were systematically examined. CLCS induced bridging aggregation and regulated aggregate architecture. While near-neutral conditions favored larger agglomerates, weakly alkaline conditions (pH ≈ 9) produced more compact and stable structures, increasing magnetic capture efficiency from 63.47% to 85.89%; excessive CLCS, however, caused steric hindrance and structural loosening. Magnetic capture experiments further revealed a transition from individual-particle capture to cooperative aggregate capture. Force-balance modeling demonstrates that structural enlargement enhances the ratio of magnetic force to hydrodynamic resistance, thereby improving capture probability. These findings clarify the cooperative magnetic capture mechanism of CLCS-induced hematite aggregates and provide mechanistic insight into the efficient recovery of ultrafine weakly magnetic hematite.
✓ 已验证
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Yangchun Ge,Zhuochao Shen,Yuying Xie,Yupeng Qiu,Haohua Zhang,Changmeng Sun,Jiangkuan Tang,Bingke Li,Junran Xu,Xuqiang Peng,Lanlan Zhai,Zhongyu Li
A multifunctional crosslinker enables an intelligent, self-healing KGM hydrogel. • The hydrogel responds to pH, reactive oxygen species, and redox stimuli. • The smart coating extends banana shelf-life via synergistic barrier and antibacterial effects. In this study, a novel dual-terminal phenylboronic acid-functionalized quaternary ammonium crosslinker (DTDP-PBA) containing a disulfide linkage was synthesized to construct a konjac glucomannan (KGM)-based hydrogel. The hydrogel network formed through dynamic boronic ester crosslinking, offering rapid self-healing (within 5 min) and multi-stimuli responsiveness to pH, reactive oxygen species (ROS), and redox potential. As a banana preservation coating, the hydrogel exhibited low permeability to water vapor, CO 2 , and O 2 , good UV-shielding, and excellent biocompatibility, outperforming polyethylene film and pure KGM. Over 8 days of ambient storage, it reduced weight loss to 3.9%, kept decay rate below 13.9%, maintained firmness at 20.1 N, and delayed ethylene peak to day 7, thus retarding fruit softening and deterioration. This work provides a versatile dynamic covalent strategy for responsive polysaccharide materials and a high-performance smart coating for bananas and other perishable fruits. Download: Download high-res image (131KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Nan Lv,Shirui Zhang,Khay Wai See,Xiaolin Wang
Asymmetric band engineering integrates multiple energy conversion pathways. • Electrode-induced built-in potentials regulate directional carrier transport. • Coupled temperature, humidity and pressure generate complementary DC-AC outputs. • Enables bias-free multimodal energy harvesting and self-powered sensing. Efficient conversion of environmental signals into electrical energy is essential for self-powered devices and sensing technologies. Traditional designs often rely on single-function mechanisms, leading to inefficiencies and scalability issues. In this work, we introduce an asymmetric band engineering strategy that integrates multiple energy conversion pathways within a single composite nanofiber membrane (SCNFM). By exploiting electrode work function differences, the asymmetric energy-level configuration between Al/SCNFM and Cu/SCNFM enhances charge transport and couples thermally induced, humidity-driven, and piezoelectric processes for efficient energy conversion. The SCNFM demonstrates a temperature range of 25–210 °C, humidity detection from 30 to 90% RH, and pressure sensing from 0.5 to 3 N, with stable outputs under varying conditions. Under coupled temperature and humidity stimuli, the device exhibits a 21% voltage enhancement at 70 °C, demonstrating a clear synergistic effect. This design simultaneously converts temperature, humidity, and pressure stimuli into complementary DC and AC signals without external bias, offering a scalable framework for multi-stimulus energy harvesting and self-powered sensing in applications such as flexible electronic skins and wearable health monitors. Download: Download high-res image (145KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Xuebiao Li,Ning Li,Suyi Wen,Jiahui Li,Xinru Yang,Mei Liu,Fei Han,Hulin Zhang
An anti-freezing, non-drying thermogalvanic hydrogel with interfacial gating has been prepared. • The gel has high robustness (638 kPa) and thermoelectric performance (1.45 mV K −1 ). • Crack-engineered interface enables dual- layer thermogalvanic with fast (∼40 ms), sensitive ionic modulation. • A wearable wristband enables 6-channel signal acquisition for feature encoding. • High-precision (>95%) self-powered wireless sign language recognition. Next-generation human-machine interfaces require energy-sustainable and highly responsive sensing systems. However, most wearable sensors rely on external power supplies and complex signal processing, limiting long-term stability and portability. Here, we propose a self-powered thermogalvanic hydrogel wristband that simultaneously harvests energy from the body-ambient temperature gradient and transduces mechanical deformation into readable electrical signals. The wristband integrates six dual-layer hydrogel patches, each exhibiting high extensibility (534.5%), adaptable modulus (638 kPa), lightweight portability, tunable ionic conductivity, and anti-drying stability for prolonged use. Enhanced sensing is achieved through thermoelectric–mechanical coupling governed by interfacial resistance gating, wherein deformation reduces the resistance barrier and enhances the intrinsic thermoelectric current. This coupling ensures high sensitivity with a response time of merely 40 ms. By integrating deep learning algorithms, the wristband achieves real-time sign language recognition and object authentication with an accuracy exceeding 95%. This work introduces a hybrid strategy for intelligent motion recognition, providing a new insight for sustainable wearable human-machine interaction.
✓ 已验证
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Manman Wu,Wenwei Qiu,Yuliang Su,Wei-Wei Zhao,Ninghui Song,Bin Hu,Guangxu Chen
Background Volatile organic compounds (VOCs), ubiquitous aquatic pollutants, have garnered global attention due to their potential threats to aquatic organisms and human health. While purge-and-trap (P&T) with gas chromatography-mass spectrometry (GC-MS) is the standard detection method, commercial systems face limitations in detection limits and contamination resistance due to sorbent traps. This study developed an adsorbent-free ultra-low-temperature P&T system using Stirling cryogenic refrigeration technology, integrated with fully automated online sampling and quality control modules, thereby establishing a robust GC-MS monitoring platform. Results The developed system achieves quantitative VOC capture at −120°C without adsorbent materials, eliminating trap degradation and cross-contamination. Comprehensive validation using 56 representative VOCs demonstrated exceptional analytical performance in full-scan data acquisition mode: linear dynamic range of 0.1–10 μg L −1 (R 2 > 0.9975), method detection limits (MDLs) of 0.005–0.016 μg L −1 , precision of 2.0–5.2% (RSD, n = 6), and trueness of 86.9–115.7% (recovery). A 15-day continuous field validation in real drinking water sources confirmed system robustness (recoveries ranging from 70.0% to 130.0% for 94.6% of all target compounds). Significance This adsorbent-free approach differs from conventional adsorption-based methods by relying on condensation for VOC enrichment. It achieves detection limits more than five times lower than China's standard GB/T 5750.8-2023 method (0.055-0.365 μg L −1 ) while avoiding carryover contamination and adsorbent-related maintenance. By eliminating consumable trap packing and supporting autonomous operation through integrated QC protocols, the system reduces operational costs and personnel requirements. These characteristics make the technology suitable for unattended, long-term online monitoring in complex environmental matrices, providing a practical option for real-time surveillance of hazardous VOCs in remote water sources and facilitating rapid response to episodic pollution events.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Jie Li,Zhengfeng Xie,Yujie Hu,Rui Zhang,Hong Liao,Junjie Gao,Wei Shi,Chuxiang Zhou
CNTC exhibits a micron-scale flower-like structure resembling sunflower seeds, with porous sites that enhance the capture of pollutants. • Its remarkable ability to adsorb multiple pollutants demonstrates significant potential for treating complex industrial wastewater streams. • CNTC exhibits maximum adsorption capacities of 1621.27 mg/g for CR, 158.99 mg/g for Cu 2+ , and 218.47 mg/g for sulfides. • CNTC demonstrates excellent application value in continuous flow adsorption. The rapid growth of urbanization and industrialization around the world has led to significant water pollution caused by humans. In response to the challenge of treating complex contamination involving dyes, heavy metals and sulfides, this study successfully designed and synthesized a porous micellar structure adsorbent (CNTC) using cyclodextrin as the raw material via molecular design. Physical characterization reveals that the material possesses unique morphological features and is rich in functional groups, such as hydroxyl, carboxyl and amino groups. It also has an extended π-π conjugated system, which provides multiple active sites for efficient adsorption. Adsorption experiments confirm that CNTC exhibits exceptional removal capacities for Congo red (CR), Cu 2+ and sulfides, with maximum adsorption capacities of 1621.27, 158.99 and 218.47 mg/g respectively. The adsorption process conforms to the multilayer chemisorption model and proceeds spontaneously. Notably, in dynamic column adsorption experiments, CNTC's adsorption behavior towards CR closely matches the Yoon–Nelson model, demonstrating its potential for continuous treatment. Furthermore, CNTC exhibits excellent cycling stability and salt tolerance, maintaining high pollutant removal efficiency in real aquatic environments, which indicates its significant practical application value. Download: Download high-res image (374KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Yize Chen,Pengbing Zhao,Zheng Gao,Yunna Pu,Jin Huang,Jianjun Wang,Jie Zhang,Hongxiao Gong
The growing demand for conformal microwave devices in aerospace and autonomous systems requires ceramic substrates with low dielectric loss and curved geometries. While low-temperature co-fired ceramics (LTCC) are ideal candidates for such high-frequency applications, their conventional manufacturing is mainly limited to planar structures. In this work, an integrated digital light processing (DLP) strategy for manufacturing curved SiO 2 -based LTCC components was developed to address the key challenges of slurry rheology, curing behavior, and sintering-induced deformation. First, a 1.0 wt.% KH-570 modification was used to enhance the powder-resin interface through Si-O-Si bonding and polymerizable functional groups, yielding a printable slurry (50 vol.% loading, 2.74 Pa·s at 30 s –1 ). Second, to mitigate excessive light penetration in the low-scattering SiO 2 system, a UV absorber was incorporated to regulate the curing behavior, reducing the penetration depth ( D p ) from 96.3 μm to 52.0 μm. Third, a buried powder sintering strategy was implemented to suppress the deformation of unsupported curved architectures. Consequently, curved LTCC substrates exhibited a low dielectric constant of 2.55 and a low dielectric loss of 0.0022 at 10 GHz. The practical applicability was validated by an inkjet-printed conformal X-band microstrip antenna, which exhibited a resonant frequency of 10.11 GHz and a return loss of –25.8 dB. This work establishes an effective strategy for the additive manufacturing of curved LTCC ceramics and provides a viable route toward high-performance conformal RF devices.
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Jie Li,Menghao Li,Yu Li,Fan Wang,Xinqi Liang,Jiawei Zhang,Zexiang Shen,Minghua Chen
Achieving fast ion transport and stable interfacial chemistry at low temperatures through electrolyte design remains a major challenge for commercial LiFePO 4 ||Graphite (hereafter referred to as LFP||Gr) lithium-ion batteries (LIBs). Herein, a weakly solvating ester-based electrolyte is formulated using ethyl acetate (EA), diethyl carbonate (DEC), fluoroethylene carbonate (FEC), and dimethoxyethane (DME) with bis(trifluoromethanesulfonyl)imide (LiTFSI) and a LiNO 3 additive. Compared to systems employing large amounts of fluorinated solvents or high-concentration electrolytes, the solvent cost is reduced by using low-cost ester-based primary solvents. The tailored solvent environment promotes an anion-rich primary solvation sheath, which is conducive to promoting the formation of an inorganic-rich interfacial film on graphite anode surface, dominated by LiF and nitrogen-containing species, and lower the Li + desolvation energy barrier, resulting in accelerated interfacial Li + transport kinetics and enhanced graphite/electrolyte interfacial stability at low temperatures. As a result, the designed electrolyte shows excellent compatibility with both LiFePO 4 and graphite from ambient to low temperatures and provides enhanced rate capability relative to conventional carbonate electrolytes. High-mass-loading LFP||Gr full cells employing the designed electrolyte deliver 131.8 mAh g −1 at 2 C at ambient temperature and maintain 128 mAh g −1 at −30 °C, significantly surpassing the performance of cells with conventional carbonate-based electrolytes (12.7 and 108 mAh g⁻¹, respectively). This work provides a practical way to achieve commercial high-rate low-temperature graphite-based LIBs by regulating electrolyte solvation structure and the electrode/electrolyte interfacial structure. Download: Download high-res image (245KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Xinnan Kang,Xiaoyou Cui,Zhiyu Zhang,Chuhan Zhang,Bin Liu
The inefficient separation of photogenerated charge carriers significantly limits the photocatalytic efficiency of nitrogen-enriched graphitic carbon nitride (g-C 3 N 5 ). To address this issue, a CoWO 4 /C 3 N 5 type-II heterojunction was fabricated via a water-bath-assisted process followed by calcination, providing an alternative to conventional hydrothermal approaches. The optimal composite (2% CoWO 4 /C 3 N 5 ) demonstrated exceptional photocatalytic activity and broad-spectrum applicability, achieving degradation rates of 71.24% for MO, 82.26% for MB, and 80.09% for RhB within 20 min. It also maintained high efficiency in treating complex mixed-dye systems, underscoring its practical potential. Phytotoxicity tests using mung bean seeds and natural lotus leaves further indicated that the treated dye solution exhibited no obvious toxicity and even promoted root elongation. The improved performance can be attributed to the broadened visible-light response and the efficient charge separation/transfer enabled by the type-II heterojunction, which also contributes to the structural stability of the photocatalyst. Download: Download high-res image (272KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子