INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Xinru Wang,Zhuocheng Li,Jinjin Qian,Dandan Zhao,Xiaoxu Zhang,Xiaolong Ma
Removing volatile organic compounds (VOCs) from emissions is critical, yet current approaches often cause CO 2 emissions or merely transfer VOCs between phases. We present an iron-catalyzed pyrolysis technique that converts o -xylene into solid carbon and COx-free hydrogen, offering the potential to produce COx-free hydrogen from VOCs. Using a high-temperature fixed-bed reactor (800–1000 °C), we found that the reduced Fe catalyst activity increases with temperature and reaction time. Optimal conditions gave a removal capacity of 376.1 mg g −1 , hydrogen production of 394.6 mL g −1 , and carbon production of 268.8 mg g −1 . The decomposition process involves carbon infiltration and the transformation of intermediate Fe 3 C, leading to catalyst fragmentation and enhanced activity. The resulting iron-carbon hybrid features a carbon-encapsulated iron structure comprising crystalline α-Fe and graphite. This structure exhibits superior catalytic performance in degrading methylene blue via H 2 O 2 , offering a promising foundation for developing environmentally friendly VOC treatment technologies.
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Nan Wu,Bao-Xu Jiang,Jing-Yu Sun,Bo Jiang,Yu-Rong Liu,Yu-Teng Zhang,Nan Lv,Shuang-Bao Li
● Zr-based MOC/PAN composite beads was fabricated by a phase inversion method. ● ZrT@PAN-0.5 beads achieved 97.68% ± 2.31% removal efficiency for methyl orange. ● Adsorption mechanism was mainly attributed to electrostatic interactions and pore volume. ● This research pioneers Zr-MOCs as fillers in composite beads for pollutant removal. The demand for synthetic dyes has continuously increased due to their wide application in industrial coloration. However, the discharge of dye-containing wastewater poses significant risks to both ecosystems and human health. In the present study, zirconium-based metal-organic cages (Zr-MOCs) were incorporated into polyacrylonitrile-based beads via a facile phase-inversion method, yielding a series of Zr-MOCs@PAN composite beads. The adsorption performance of the composite beads for methyl orange (MO) was evaluated via batch adsorption experiments. The key factors affecting adsorption performance, such as the loading ratio of Zr-MOCs, adsorbent dosage, initial dye concentration and solution pH, were systematically investigated. The results demonstrated that ZrT-1 integrated composite beads exhibited an adsorption capacity of 48.62 ± 1.72 mg/g for 40 mg/L MO at pH = 5 (removal efficiency reached 97.68% ± 2.31%), which was significantly higher than that of pristine PAN beads. The adsorption driving force for MO was mainly attributed to the synergistic effect of electrostatic interactions, pore volume, and hydrogen bonding interactions between the zirconium cages and MO. This work provides a versatile route to fabricate MOC-functionalized composite beads, exhibiting promising potential for dye removal from wastewater. Download: Download high-res image (136KB) Download: Download full-size image Novel composite beads were constructed by embedding Zr-based metal-organic cages into a PAN matrix, exhibiting efficient removal behavior for dye pollutants.
✓ 已验证
DOI
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2026
·
IF 5.2
Abdelazeem S. Eltaweil,Nouf Al Harby,Mervette El Batouti,GopiKrishna Pasam,Mazin Al Kitani,Eman M. Abd El-Monaem
In this study, the adsorption capability of green algae-derived biochar was enhanced by integrating with iron sulfide, creating the FeS 0.66 @GA-BC 0.33 composite. The magnetic FeS 0.66 @GA-BC 0.33 composite exhibited excellent adsorption performance toward Cr(VI) with a maximal adsorption capacity of 423.73 mg/g. Surprisingly, the FeS 0.66 @GA-BC 0.33 composite showed fast adsorption, with an equilibrium time of 60 minutes. Furthermore, batch experiments showed that the maximum removal efficiency of Cr(VI) by FeS 0.66 @GA-BC 0.33 was 92.39% at pH 3, 20 °C, and an adsorbent dose of 0.01 g. The kinetic analysis indicated that the pseudo-second-order model best described the adsorption process, while the isotherm results showed good agreement with both the Langmuir and Freundlich models. A combination of response surface methodology (RSM) and Box–Behnken design (BBD) was used to optimize the adsorption of Cr(VI) onto FeS 0.66 @GA-BC 0.33 . The independent variables were adsorbent dose (5–30 mg), initial Cr(VI) concentration (50–300 mg/L), and contact time (1–120 min). Analysis of variance (ANOVA) showed that the maximum removal efficiency reached 99.09% at an adsorbent dose of 17.5 mg, an initial Cr(VI) concentration of 50 mg/L, and a contact time of 120 min. The Cr(VI) adsorption mechanism was proposed based on the X-ray photoelectron spectroscopy spectra of fresh and used FeS 0.66 @GA-BC 0.33 composites, suggesting the governing reduction reaction, electrostatic interaction, and coordination bond pathways on the adsorption of Cr(VI).
✓ 已验证
DOI
高影响因子
TALANTA
·
2026
·
IF 6.7
Guicai Fan,Jiayan Xu,Ji Ying,Qiguang Wang,Xueyan Bian,Chenjie Gu,Tao Jiang,Jianwei Ma
It is essential for the clinical diagnosis and treatment of idiopathic membranous nephropathy (IMN) to achieve the sensitive and efficient detection of anti-phospholipase A2 receptor (PLA2R) antibodies which has been identified as a major autoantibody for IMN. In this work, we developed a multi-composite surface enhanced Raman scattering (SERS) substrate by decorating two-dimensional black phosphorus nanosheets (BP NSs) onto carbon paper (CP) through hydrothermal reaction and then triggering in-situ reduction of silver nanoparticles (Ag NPs). Except for the promising target enrichment efficiency attributed to the one-dimensional fibrous structure of CP with large specific surface area, the resulting CP@BP@Ag composite substrate exhibited perfect SERS activity owing to the synergistic effect of plasmonic coupling and charge transfer (CT). Furthermore, this triple nanoplatform was employed as immunosubstrate to detect anti-PLA2R antibodies based on a sandwich immunostructure with the participation of anti-human IgG antibodies-conjugated Raman immunoprobe. Benefiting from mature antigen-antibodies specific recognition, the limit of detection (LOD) was measured at 0.43 ng/mL. Especially, the proposed SERS-based immunoassay strategy was conducted to monitor real IMN samples, demonstrating consistent trend with the clinical method. Overall, this platform paves the way for ultrasensitive diagnostics of IMN, which offers a promising strategy for extended monitoring of renal biomarkers.
✓ 已验证
DOI
PubMed
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2026
·
IF 17.2
Puyu Du,Yi Shen,Tao Peng,Zisheng Yu,Tingting Du,Meng Ma,Hongyu He,Zhilin Jia,Yang Liu,Shaohua Shen
Selective electrocatalytic 5-hydroxymethylfurfural (HMF) oxidation reaction (HMFOR) is believed to be highly dependent on the surface adsorption behaviors. Herein, a series of CuAu alloys with various metallic compositions and steered surface adsorption behaviors were prepared by a one-step electrodeposition method. By optimizing the Cu molar ratios, a superior electrocatalytic performance for HMFOR via one-electron dehydrogenation could be observed over Cu 0.25 Au 0.75 , reaching a current density of 84.8 mA cm –2 at 0.4 V vs . RHE, with 94.5% 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) yield, 98.6% HMFCA faradaic efficiency (FE) and 94.6% H 2 FE. Remarkably, with Cu 0.25 Au 0.75 as the anode and Pt/C as the cathode, the integrated membrane electrode assembly electrolyzer could operate at a low cell voltage of 0.45 V for simultaneous HMFOR and bipolar H 2 production, with 94.5% HMFCA FE and ~200% H 2 FE. Experimental investigations and theoretical calculations demonstrate that the alloying induced charge redistribution between Cu and Au could modulate the d -band centers, and then steer the surface adsorption behaviors to balance HMF adsorption and HMFCA desorption at surface, ensuring the active site availability for one-electron dehydrogenation HMFOR. This work presents a facile strategy for designing efficient electrocatalysts for ultralow-potential HMFOR, with fundamental surface adsorption behaviors deepened for biomass electrooxidation.
✓ 已验证
DOI
高影响因子
Materials Today Chemistry
·
2026
·
IF 7.4
Lan Zhang,Zixin Xu,Hongwei Che,Aifeng Liu
An integrated design strategy is proposed to prepare NC@NiSe 2 and MNCNs. • The integrated NiSe 2 with NC synergistically enhance charge storage kinetics. • The NC@NiSe 2 electrode exhibits enhanced charge storage capability. • The MNCNs feature large specific surface area and rapid ion diffusion kinetics. • The NC@NiSe 2 NC.||MNCNs HSC device delivers high energy and power densities. To develop high-performance electrode materials for hybrid supercapacitors (HSCs), we here propose an integrated design strategy for simultaneously fabricating nitrogen-doped carbon networks decorated with NiSe 2 nanoparticles (NC@NiSe 2 ) and macroporous nitrogen-doped carbon networks (MNCNs) using sodium glutamate as nitrogen containing carbon sources, nickel nitrate as nickel source, and NaCl as the template. Experimental and computational studies reveal that the synergistic coupling of NC with NiSe 2 enables richer electroactive sites, more charge transport channels, higher electrical conductivity, and lower OH - adsorption energies on the surface. Consequently, the NC@NiSe 2 electrodes demonstrate enhanced charge storage performance (989 C g -1 at 1 A g -1 and 83.2% capacity retention after 2000 cycles at 10 A g -1 ). Meanwhile, the MNCNs encompassing macro-/meso-/micropores, possess a large specific surface area, continuous conductive networks, and favorable ion diffusion channels, thereby achieving a specific capacitance of 201 F g -1 at 1 A g -1 as well as 94.5% capacitance retention after 2000 cycles at 5 A g -1 . Furthermore, the assembled NC@NiSe 2 ||MNCNs HSC device delivers the maximum energy density of 38.0 Wh kg -1 at 797 W kg -1 and maintains 88.4% of its initial capacity after 2000 cycles. Our work presents a promising and scalable pathway for the rational design of advanced electrode materials with improved electrochemical performance for next-generation energy storage applications. Download: Download high-res image (317KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Nana Lv,Pedram Fatehi,Xinyi Shao,Mengke Zhao,Long Liang,Bo Geng,Jian Wang,Guigan Fang,Ting Wu
An ultrasonic-alkaline process was developed to boost fines cationization under mild, green conditions. • The pretreatment mechanism of this process was studied through multi-scale structural characterization. • Cationized fines improved paper strength and have potential as a green paper additive. Cationic etherification is valuable for imparting advanced functionality to lignocellulosic fibers, but its practical application is constrained by high reagent demand and a low reaction efficiency. This study developed an ultrasonic-alkaline synergistic pretreatment to enhance the cationic etherification of the fine fraction from bamboo chemi-mechanical pulp (BMP). To elucidate its underlying mechanism, this study employed ultrasonic pretreatment and NaOH pretreatment in two separate processes to generate control groups. Cationic etherification modification of fines was conducted with the gradient dosages of 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHPTAC), and the superiority of synergistic pretreatment was verified comparatively. Furthermore, the mechanism of the ultrasonic-alkaline pretreatment was elucidated by systematically tuning parameters (ultrasonic duration, ultrasonic power, and aqueous sodium hydroxide concentration) and examining how these variables influence the fine fraction. The results show that this pretreatment significantly improved the degree of substitution (DS) to a maximum of 41%. This enhancement is attributed to the cleavage of the ester bonds in hemicellulose and lignin, promoting their removal and disrupting the crystalline regions of cellulose. Collectively, these changes markedly increase the exposure of active hydroxyl groups, which in turn promotes the etherification reaction significantly. These findings indicate that ultrasonic-alkaline pretreatment offers an efficient and green strategy for boosting the cationic modification efficiency of lignocellulosic materials. Consequently, the cationized fines at 6% addition improved the paper strength of bamboo and wood pulps by over 20%. Download: Download high-res image (143KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING RESEARCH & DESIGN
·
2026
·
IF 4
Yaran Wen,Feiyu Wang,Yaxiao Li,Jinmeng Kang,Wandi Chen,Wenzhi Kang,Yuxin Du,Yixuan Chen,Yudong Xu
This study aimed to develop an efficient, stable, and environmentally-friendly photocatalyst for degrading methylene blue (MB) under visible irradiation. Bio-compatible and nanorod-like hydroxyapatite (HAP) was synthesized using a chemical co-precipitation method, showing that HAp achieved a degradation efficiency of 99.41% within 90 min for 10 mg/L MB with an optimal catalyst dosage of 2 g/L, which was ascribed to the active radicals such as h + , 1 O 2 , and ·O 2 - induced by photo-sensitization of MB dyes and surface adsorption of HAP. It is shown that HAp exhibits good structural stability and re-usability. And a degradation pathway for MB involving stepwise demethylation, ring opening, and subsequent mineralization was also proposed. This research is believed to promote the practical applications of hydroxyapatite in photocatalytic treatment of dye wastewater.
✓ 已验证
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Guanya Ji,Bo Feng,Bo Zhang,Yaxin Shi,Bo Tao,Qijian Niu,Xiuxiu Dong,Jinxiu Song,Zhong Tang,Xiuli Shen
Hydrothermal and mechanoenzymatic hydrolysis each enhance enzyme utilization. • Hydrothermal pretreatment reduces lignin inhibition and alleviates physical blocking. • Additives (e.g., BSA) can reduce non-productive enzyme adsorption. • 76.7% glucose yield achieved at 25% solids loading and low enzyme usage within 12 h. The valorization of lignocellulosic biomass is crucial for sustainable bioenergy production. This study systematically investigates an integrated strategy, combining hydrothermal pretreatment, additive addition, and mechanoenzymatic hydrolysis, to enhance monosaccharides production from rice straw at high solids loading while reducing enzyme usage for cost-effective saccharification. Hydrothermal pretreatment (180°C, 120 min) resulted in hemicellulose depletion and the formation of porous structures in rice straw, thereby enhancing cellulose accessibility. This process enabled the near-complete conversion of cellulose to glucose, achieving both a 98.11% yield and a glucose concentration of 134.75 g/L. Both hydrothermal pretreatment and mechanoenzymatic hydrolysis improved the efficiency of enzyme utilization under high-solids conditions. Lignin inhibition analysis suggested that hydrothermal pretreatment reduced the overall inhibitory effect of lignin and effectively alleviated its physical blocking. In static and mechanoenzymatic hydrolysis systems, the overall inhibition decreased from 14.12% to 13.01% and from 28.02% to 21.99%, respectively. Moreover, under conditions of low enzyme loading (10 FPU/g) and high solids (25% w/v), bovine serum albumin-aided mechanoenzymatic hydrolysis achieved both a 76.68% glucose yield and a concentration of 105.67 g/L within 12 h. These findings provide crucial insights for overcoming the recalcitrance of biomass and addressing the solid effects in high-solids enzymatic hydrolysis, thereby highlighting the synergistic potential of combined strategies in lignocellulosic biorefining. Download: Download high-res image (244KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Hongying Liu,Abderaouf Djeffal,Zheyue Mei,Yu Liu,Zheng Meng,Xinru Xu,Mengying Wang,Xungang Diao
A multi-state all-solid photothermal window achieves decoupled and programmable regulation of solar transmission and thermal radiation within a single device. • The system enables fully integrated multi-band control across VIS–NIR–LWIR regions, overcoming the intrinsic coupling limitation in conventional smart windows. • Large infrared emissivity modulation (Δε₃–₅ μm = 0.44, Δε₈–₁₄ μm = 0.46) allows adaptive switching between radiative cooling and thermal insulation. • The device delivers four programmable operating modes with a dynamic temperature modulation of ~12.1 °C. • This work provides a practical strategy for reducing building energy consumption through dynamic thermal management. Smart windows that dynamically regulate solar irradiation and thermal radiation are critical for reducing building energy consumption, However, current systems suffer from intrinsic coupling between solar transmission and thermal emission, preventing independent regulation. Here, we report a multi-state all-solid dynamic broadband photothermal window that enables energy-flow decoupled regulation across visible, near-infrared, and long-wave infrared regions within a single integrated device. The Multi-State all-Solid Dynamic Broadband Photothermal Window (MSDBP) integrates a WO 3 electrochromic layer, a LiPON solid electrolyte, and an interpenetrated nanowire/nanosheet V 2 O 5 ion-storage layer, forming a structure–material synergistic architecture with enhanced ion transport and carrier modulation. By integrating carrier-induced optical transitions with an asymmetric Fabry–Pérot cavity, the device establishes a spectrally selective thermal management mechanism, allowing independent and programmable control of solar transmission and thermal emission. Specifically, the MSDBP exhibits a large visible transmittance modulation (12.6–70.5% at 550 nm) and dynamically tunable infrared emissivity with Δε 3–5 μm = 0.44 and Δε 8–14 μm = 0.46, accompanied by a maximum temperature modulation of ~12.1 °C under controlled thermal conditions. Four adaptive operating modes (bright cool, bright warm, dark cool, and dark warm) are realized via voltage-driven regulation, enabling flexible responses to varying environmental conditions. This work demonstrates significant potential for reducing building energy consumption by enabling adaptive regulation of solar heat gain and thermal radiation, offering a practical strategy for next-generation energy-efficient building envelopes.
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2026
·
IF 4.3
Huamei Zhong,Xiaotong Li,Tongqing Tang,Hongyu Zhu,Xuean Song,Shewei Hu,Feifei Chen,Alei Zhang,Kequan Chen
Multi-enzyme cascade designed for 5-hydroxypipecolic acid synthesis from low-cost substrate. • Self-sufficient cofactor recycling achieved without expensive exogenous coenzymes. • Under glucose-controlled feeding, the system achieved a product titer of 23.65 g L -1 . 5-Hydroxypipecolic acid (5-HPA) is a chiral building block widely employed in pharmaceutical synthesis. Conventional chemical synthesis of 5-HPA is limited by poor stereoselectivity and environmental burdens. Herein, we developed a biosynthetic method for 5-HPA production from L-lysine (L-Lys) through a multi-enzyme cascade. Firstly, a lysine 6-aminotransferase SkL6AT from Stenotrophomonas koreensis and an imine reductase HeP5C from Halomonas elongata were screened and introduced into recombinant strains capable of converting L-Lys to L-pipecolic acid (L-PA). After optimization of plasmid copy number and ribosome-binding site strength, as well as establishment of the NADH regeneration system, the L-PA titer reached 7.50 g L⁻¹. Subsequently, a hydroxylase XdPH from Xenorhabdus doucetiae was introduced to construct a 5-HPA-producing strain. Fermentation conditions were optimized in shake flasks and subsequently scaled up to a 5 L bioreactor. Under a fed-batch strategy, the final engineered strain produced 23.65 g L -1 5-HPA with a yield of 0.587 g g⁻¹ from L-Lys. Download: Download high-res image (192KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Hao Wang,Yunhua Lu,Pengwei Lv,Guoyong Xiao,Tonghua Wang,Lin Li
While conventional polymeric gas separation membranes are limited by the inherent permeability-selectivity trade-off, mixed matrix membranes (MMMs) often suffer from poor interfacial compatibility and non-selective void defects. Herein, rigid flaky polyimide (PI)-type covalent organic frameworks (COFs) were solvothermally synthesized using 2,4,6-triaminopyrimidine (TAP) and pyromellitic dianhydride (PMDA). The obtained COFs were adopted as functional fillers and blended into hydroxyl-containing polyimide (HPI) precursor derived from 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane (6FAP) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) to prepare thermally rearranged (TR) MMMs. The as-synthesized COFs possess excellent thermal stability, distinctive porous structure and moderate interfacial affinity with the polymer matrix, which effectively enhances the gas separation performance of the obtained membranes. At a PI-type COF loading of 2.0 wt%, the MMM treated at 450 °C for 1 h achieves superior separation performance. The permeabilities toward H 2 , CO 2 , O 2 and N 2 reach 2446, 2920, 495 and 131 Barrer, and the corresponding ideal selectivities of H 2 /N 2 , CO 2 /N 2 and O 2 /N 2 are 18.67, 22.29 and 3.77, respectively. Remarkably, the H 2 /N 2 separation behavior exceeds the 2008 Robeson upper bound, and CO 2 /N 2 as well as O 2 /N 2 separation performances are close to this limit. Elevated treatment temperature and extended heating time remarkably improve gas permeability but sacrifice membrane selectivity. Moreover, the fabricated MMMs display satisfactory anti-aging stability after 180-day ambient storage. This study develops a valid modification strategy via flaky PI-type COF incorporation to elevate the gas separation performance of TR polymers, providing a promising route for constructing high-efficiency gas separation membranes.
✓ 已验证
DOI
高影响因子