Nano-Micro Letters
·
2026
·Vol. 18
·期 1
·399
·
IF 38.5
Wang Ran,Gao Qian,Wu Runhai,Mi Yongqi,Yang Shaopei,Wang Hongxiao,Wan Ting,Gull Sehrish,Xie Kefeng,Long Guankui,Du Pengcheng
Drawing inspiration from the “adhesion-conduction” architecture of spider webs, a hierarchical hydrogel electrolyte (MTP) is developed with uniform 3D ion-conductive pathways.
Specific “sticky sites” on the MXene/tannic acid network facilitate superior electrochemical properties, including a high Zn 2+ transference number of 0.833 and ionic conductivity of 27.69 mS cm −1 .
This strategy enables stable Zn anodes with an impressive lifespan of 4600 h (>6 months) and empowers flexible full cells with outstanding cyclability over 10,000 cycles.
✓ 已验证
DOI
PubMed
高影响因子
Materials
·
2026
·Vol. 19
·期 12
·2471
·
IF 3.7
Xiufen Liao,Zhilin Gong,Zhengu Chen,Junxiang Lai,Qiumei Jiang,Maomi Zhao,Shengxun Yao,Jing Xiang
Developing an environmentally friendly material with dual functionality of corrosion monitoring and inhibition is crucial for reducing economic losses. Herein, dual-function phytic acid carbon dots (PA-CDs) were prepared with a hydrothermal treatment method for corrosion monitoring and inhibition. The as-prepared PA-CDs exhibited a distinct color change from brown-yellow to wine-red immediately in the presence of OH−, and H+can restore the color of the PA-CDs-OH−system from wine-red to brown-yellow. Inspired by the above phenomenon, a visible RGB-based colorimetric sensor was fabricated by combining PA-CDs coatings with the self-made RGB-sensing device to detect OH−/H+during metal corrosion. In addition, PA-CDs had excellent corrosion inhibitory properties for Q235 steel hanging sheets in hydrochloric acid solutions, and the corrosion inhibition efficiency reached 96.40%. The excellent corrosion monitoring and inhibition properties demonstrate the potential application of the PA-CDs in engineering practice.
✓ 已验证
DOI
PubMed
高影响因子
LANGMUIR
·
2026
·
IF 4.4
Shanbo Cui,Jialong Ma,Jingyan Lu,Yawen Liu,Chang Su,Feng Teng,Haibo Fan,Peng Hu,Xin Zhao,Jiaming Song
Photocatalysis offers a green and sustainable route for pollutant degradation, with the performance of photocatalysts being a critical factor. Recently, van der Waals materials have gained increasing attention in this field due to their favorable photocatalytic properties. In this study, a novel Ag/CdPSe3 composite was synthesized via chemical vapor transport, liquid-phase exfoliation, and liquid-phase chemical reduction methods. When the Ag:CdPSe3 molar ratio was optimized to 2:1 (denoted A2C1), the composite achieved a tetracycline hydrochloride removal efficiency of 91.69% within 60 min of illumination─1.99 times that of CdPSe3. The A2C1 composite also exhibited effective photocatalytic degradation toward multiple antibiotics, including ciprofloxacin, norfloxacin, and amoxicillin, demonstrating its broad-spectrum application potential. Trapping experiments identified photogenerated holes as the dominant active species, with superoxide radicals playing supporting roles. Mechanistic studies revealed that Ag modification enhanced light absorption in the near-infrared and partial visible regions, while the Schottky junction formed at the Ag/CdPSe3 interface facilitated efficient photogenerated carrier separation. Together, these factors contribute to the superior photocatalytic performance of A2C1. This work provides new insights into the design of high-performance photocatalysts based on van der Waals materials.
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Yuhan Qiao,Gang Li,Zhiwen Luo,Mengqi Lin
The one-pot synthesis of 1,2-pentanediol from 1-pentene is a route featuring environmental benignity, cost-effectiveness, and high atom economy. In this study, a bifunctional zirconium sulfate-loaded titanosilicate molecular sieve (ZS/Ti-MWW) catalyst was prepared via the impregnation method and used in the one-pot synthesis of 1,2-pentanediol. The effects of reaction conditions, zirconium sulfate loading, and calcination temperature on the catalytic performance for the oxidative hydration of 1-pentene were systematically investigated. On the basis of the NH3-TPD characterization results, the acid amounts of different catalysts were quantitatively analyzed. The results confirmed that zirconium sulfate could introduce abundant acidic sites into the catalyst, and the acid amount varied with the loading amount of zirconium sulfate and the calcination temperature. With the increase in acid sites in the ZS/Ti-MWW catalyst, its catalytic activity in epoxide hydration was markedly improved. Thus, the 1-pentene epoxidation and epoxide hydration were efficiently carried out in one system without additional separation. Under the optimal reaction conditions, the conversion rate of 1-pentene, the selectivity, and the yield of 1,2-pentanediol reached 95.65%, 80.72%, and 77.21%, respectively. This work offers new insights into the design and preparation of bifunctional titanosilicate molecular sieve catalysts as well as the efficient and green synthesis of 1,2-diols from olefins.
✓ 已验证
DOI
高影响因子
ACS Catalysis
·
2026
·
IF 13.6
Xuan An,Jie Wang,Hu Shi,Hongxia Zhang,Jianghong Zhao,Pengju Yang
Efficient hydrogen generation via photocatalysis under red or near-infrared (NIR) light remains a formidable challenge, primarily due to the limited spectral absorption of most semiconductors and rapid charge recombination. While heterojunction engineering represents a promising strategy, conventional heterostructures often suffer from rigid interfacial architectures that restrict their charge-separation capability. Here, we present an aggregation strategy for constructing a dynamic noncovalent heterojunction using Rose Bengal sodium (RBS) and Rhodamine 6G (R6G). The results confirm that the through-space conjugation between RBS and R6G extends the light absorption of the RBS/R6G system from the visible region to the red-light region, resulting in a redshift of approximately 90 nm. Concurrently, the dynamic nature of this noncovalent heterojunction effectively suppresses backward electron transfer via excited-state structural rearrangement, thereby facilitating directional charge migration, along with a reduced exciton binding energy of 13.91 meV. Consequently, the Pt/RBS-R6G-SDS system delivers high-efficiency hydrogen evolution performance under red light, achieving a quantum yield as high as 76% at 600 nm—the highest value reported to date for red/NIR-driven hydrogen production (λ ≥ 600 nm). This work proposes a design strategy based on dynamic noncovalent heterojunctions enabled by aggregation, which effectively merges broad spectral absorption with efficient charge separation, paving the way for advanced solar-to-fuel conversion.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Yong Wang,Minglong Huang,Hongxia Li,Yu Li,Songlin Chen,Yu Li
This study synthesized a non-ionic amphiphilic self-emulsifying waterborne epoxy resin using toluene diisocyanate (TDI), polyethylene glycol monomethyl ether (mPEG), and epoxy resin E44 as raw materials via a two-step synthesis. The waterborne epoxy resin was emulsified using the phase inversion method, and the emulsification process was investigated. The prepared emulsion was cured using a commercially available aqueous curing agent, followed by mechanical properties testing of the cured products. Results from FTIR and 1 H NMR hydrogen spectrum analyses confirmed the successful grafting of hydrophilic polyether segments onto the epoxy resin without ring-opening of epoxy groups. The optimal synthesis temperatures for the two-step process were determined as 50°C (first step) and 65°C (second step), yielding transparent and pure products. During inversion emulsification, the stirring speed was 2500 rpm, and the water addition rate was 0.03 mL/s. Emulsion stability reached its highest grade when the molecular weight of mPEG was 1000, with the smallest particle size of 109.23 nm and the lowest polydispersity index of 0.201. The cured product exhibited tensile strength of 5.43 MPa and flexural strength of 29.49 MPa, demonstrating favorable mechanical strength and flexibility.
✓ 已验证
DOI
高影响因子
NAUNYN-SCHMIEDEBERGS ARCHIVES OF PHARMACOLOGY
·
2026
·
IF 4
Morsy Wafaa A.,Heibashy Dina M. I.,Eissa Shimaa M.,Elshafiey Sara H.
Pulmonary fibrosis is a progressive and fatal lung disease characterized by excessive extracellular matrix deposition. Bleomycin (BLM)-induced pulmonary fibrosis is a widely used experimental model that replicates key pathological features of the human disease. Berberine (Brb), a natural phytochemical, exhibits anti-inflammatory and immunomodulatory properties. However, its clinical application is restricted by poor bioavailability. Nano-formulation of Brb (Nano-Brb) may enhance its therapeutic potential. Therefore, this study aimed to evaluate the protective effects of Nano-Brb against BLM-induced pulmonary fibrosis in rats and to elucidate the underlying biochemical, histopathological, immunohistochemical, and molecular mechanisms. Thirty adult male albino rats were randomly assigned into six groups: control, Brb-treated (100 mg/kg body weight), Nano-Brb-treated (100 mg/kg body weight), BLM-treated (single intratracheal dose of 5 mg/kg body weight), BLM + Brb, and BLM + Nano-Brb. Nano-Brb significantly attenuated BLM-induced pulmonary fibrosis, as evidenced by reduced pro-inflammatory cytokines, including interleukin-1β (IL-1β), interleukin-4 (IL-4), interleukin-13 (IL-13), and tumor necrosis factor-alpha (TNF-α), as well as decreased matrix metalloproteinases (MMPs). It also modulated nuclear factor kappa B (NF-κB) and transforming growth factor-beta (TGF-β) signaling and reduced collagen type I (Col-I) and collagen type III (Col-III), connective tissue growth factor (CTGF), and neutrophil elastase (NE). Histopathological, histochemical, and immunohistochemical investigations confirmed marked improvement in lung architecture. Furthermore, Nano-Brb reduced transforming growth factor-beta 1 (TGF-β1) expression and upregulated pulmonary sirtuin 3 (SIRT3) gene expression. The present results suggest that Nano-Brb enhanced the lung’s architecture and functional performance by modulating inflammatory cytokines, oxidative stress, gene expression, and histopathological damage. Graphical Created in https://BioRender.com . Schematic representation of the experimental design: rats were administered bleomycin to induce pulmonary fibrosis, followed by treatment with berberine or nano-berberine. The study assessed oxidative stress markers, inflammatory cytokines, histopathological and immunohistochemical changes, and gene expression related to fibrosis and inflammation. The nano-formulation demonstrated superior therapeutic efficacy.
The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
PubMed
高影响因子
Small
·
2026
·
IF 11.8
Chen Bai,Jiarui Duan,Deyin Wang,Yuhua Wang
Optical pressure sensing plays a crucial role in high-pressure research and materials science, yet luminescent manometers that combine high sensitivity with a visually detectable color change remain rare. In this work, a novel Eu 2+ -activated KGa 5 S 8 green-emitting phosphor has been successfully synthesized, demonstrating remarkable piezochromic properties. When the applied pressure is varied from 1 atm (∼0.1 GPa) to 10.44 GPa, a significant spectral redshift is observed in the sample. This results in a visually striking color transition, shifting from a green emission peaking at 541 nm to a red emission peaking at 697 nm. This transition yields an exceptionally high-pressure linear sensitivity of d λ/ d P = 14.49 nm/GPa, marking it as the highest value reported to date among pressure-sensing materials with emission in the visible range. The multicolor emission variation is attributed to pressure-induced electronic structure modulation, enabling sensitive pressure detection. This study provides a new piezochromic phosphor with record sensitivity and an obvious visual color change, offering a promising candidate for high-pressure sensing applications.
✓ 已验证
DOI
PubMed
高影响因子
POLYMER COMPOSITES
·
2026
·
IF 4.9
Shuai Zhang,Jianbin Qin,Linli Xu,Guangcheng Zhang,Xuetao Shi
3D printing technology represents a pivotal methodology for the fabrication of carbon fiber composites characterized by intricate structural configurations. In pursuit of developing high-strength carbon fiber energy-absorbing structures (EAS), a strategy of blending thermoplastic polyurethane (TPU) with short carbon fiber (SCF) to combine both good flexibility and processability for the consequential fused deposition modeling (FDM) process is proposed. The interfacial adhesion between carbon fibers and TPU is considered with surface modification of carbon fibers with polydopamine coating, which is mainly based on the mechanisms of chemical bonding and physical interlocking, thereby enhancing the mechanical properties of the composites. More interestingly, the short carbon fibers exhibit alignment along the printing direction during the 3D printing process, which further enhances the mechanical strength of the composite material in that orientation. Furthermore, both the polydopamine coating and the orientation of carbon fibers were found to exert significant influences on the energy absorption properties of 3D-printed composites. When the carbon fiber content is 20%, the specific energy absorption (SEA) of TPU/SCF@PDA composites in the axial and transverse directions is increased by 114.3% and 193.6%, respectively, compared with that of pure TPU. Consequently, the strategic optimization of the polydopamine surface coating and the extrusion-induced alignment of carbon fibers present an efficacious approach for the fabrication of carbon fiber composites with superior strength and energy absorption capabilities. Highlights Proposed a novel TPU/SCF@PDA 3D-printed composite material system. PDA coating enhances the interfacial strength of TPU/SCF composites. Interface enhancement and SCF orientation improve energy absorption properties. The transverse SEA of the 20% TPU/SCF@PDA composite was increased by 193.6%.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·
IF 7.6
Mengyue Wang,Chenjing Gong,Junyang Sun,Junbo Hou,Bin Yan
The development of high-performance biobased polyester adhesives has primarily focused on mechanical reinforcement, while the relationship between adhesive performance and polymer microstructure, particularly the role of weakly polar groups, remains underexplored. Here, we construct polyester systems with precisely tuned methoxy content from vanillin-derived monomers to elucidate the regulatory role of weakly polar methoxy groups in polymer thermodynamics and metal adhesion. Methoxy incorporation effectively suppressed crystallization, inducing a transition from a highly crystalline, high-modulus state to an amorphous, low-modulus state (Tg = 24 °C). Interestingly, this weakening of bulk strength unexpectedly strengthened interfacial adhesion: the dual-methoxy system achieved a lap shear strength of 12.46 MPa on iron, surpassing the methoxy-free counterpart (3.71 MPa). Copolymerization experiments further demonstrated that by adjusting the ratio of methoxy-free to methoxy monomers, the crystallinity, mechanical properties, and adhesion strength (ranging from 3 to 15 MPa) of the polyesters can be systematically tuned over a wide range, validating the feasibility of methoxy groups as a structural switch for modulating adhesion performance. Molecular simulations revealed that methoxy groups enhance interfacial interaction with metals by increasing the polymer’s negative electrostatic potential and binding energy. This work establishes a new strategy for optimizing adhesion through crystalline-to-amorphous transition regulated by weakly polar groups, offering a molecular design perspective for tunable biobased polyester adhesives.
✓ 已验证
DOI
高影响因子
NATURAL PRODUCT RESEARCH
·
2026
·
IF 1.8
Ziteng Dai,Zhangyang Shen,Juan Wang,KangHuini Song,Mei Yang,Honglin Xue,Hongwei Guo,Zhiheng Su,Xia Wei,Yanying Liu,Dan Zhu
Eight compounds were isolated and identified from Aspergillus fumigatus 06T03, a rhizospheric soil fungus obtained from the soil of Aegiceras corniculatum. These include aspertriterpene A (AT-A,1), chaetominine (CHM,2), fumitremorgin B (FT-B,3), verruculogen (VRC,4), 12,13-dihydroxyfumitremorgin C (DH-FT-C,5), asperfumigatin (AFG,6), fumitremorgin C (FT-C,7), and verruculogen TR-2 (VRC-TR2,8). Their structures were elucidated through comprehensive spectroscopic analysis and single-crystal X-ray diffraction. Notably, AT-A(1) represents a new isolate from the genus Aspergillus sp., and its crystal structure is reported here for the first time. In vitro antibacterial assays revealed that AT-A(1) exhibited potent inhibitory activity against Pseudomonas aeruginosa and Staphylococcus aureus, with minimum inhibitory concentration (MIC) values of 2 µg/mL and 4 µg/mL, respectively. Further investigation demonstrated that AT-A(1) significantly suppresses bacterial biofilm formation. Moreover, when administered at a specific concentration, it can compromise the structural integrity of bacterial cell membranes and enhance membrane permeability. This study expands the chemical diversity of secondary metabolites from mangrove-derived A. fumigatus. Furthermore, this is the first report of compounds 2–8 as constituents of fungi associated with A. corniculatum, reinforcing the potential of mangrove-associated microorganisms as a prolific source of bioactive natural products.
✓ 已验证
DOI
PubMed
高影响因子
LANGMUIR
·
2026
·
IF 4.4
Yongxin Hu,Haitao Ji,Liangjun Li,Xiaoyu Mao,Changhua Li,Songlin He,Chuan Fu,Yi He
The development of high-performance anticorrosion coatings through sustainable methods is of critical importance. However, the practical applications of Ti3C2Tx MXene are often quite limited. This study proposes a fabrication strategy aimed at developing an intelligent, self-healing composite coating. Specifically, porous covalent organic frameworks (COFs) were grown in situ on amino-modified Ti3C2Tx nanosheets using a Lewis acid molten salt method combined with a room-temperature synthesis approach. This carrier possesses a high specific surface area (199.65m2·g–1), enabling the high loading of corrosion inhibitors (PESA/BTA). When this substance is added to water-based epoxy resin, the resulting coating establishes a “passive protection + active repair” mechanism. It is worth noting that at a pH of 2, the controlled-release agent reaches its maximum efficacy within 180 min. Electrochemical tests demonstrated outstanding durability, with the low-frequency impedance modulus (|Z|0.01 Hz) remaining at 3 × 108 Ω·cm2 after 60 days of exposure to 3.5 wt % NaCl. This value is 2 orders of magnitude higher than that of pure epoxy. Furthermore, the coating demonstrates rapid self-healing capabilities (impedance recovery to 5 × 105 Ω·cm2 within 72 h) and superior tribological properties (friction coefficient of 0.06). This study presents a scalable method for manufacturing durable MXene-based coatings.
✓ 已验证
DOI
PubMed
高影响因子