APPLIED SURFACE SCIENCE
·
2026
·
IF 6.9
Mingao Li,Qianqian Zhang,Wenqing Xue,Fen Guo,Yongsheng Tian,Lan Yuan,Jikun Xu,Li Guo,Daniel John Blackwood,Xiaolei Huang,Yang Gui,Baoan Fan
Developing cost-effective, robust oxygen evolution reaction (OER) catalysts for water electrolysis under harsh conditions remains challenging. Here, we report a one-step scalable synthesis of monolithic hierarchical FeCoNi (oxy)hydroxide nanotubes on Ni foam (H-FCNO(OH)@NF). This integrated electrode achieves exceptional OER robustness across a wide-temperature range (25-90 °C) and concentrated alkaline electrolytes (5–30 wt% KOH), delivering a low overpotential of 310 mV at 100 mA cm −2 and maintaining > 12 h stability at 100 mA cm −2 . Mechanistic studies reveal that Fe 3+ /thiourea co-mediates nanotube formation, while Co dopant-driven crystallization directs vertical nanosheet assembly. A full characterization on the catalyst after activation confirms preserved nanotube morphology, directly correlating structural integrity with catalytic durability. This work provides a facile, scalable route toward industrial-compatible OER electrodes for sustainable hydrogen production.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Xuebin Lian,Dehuan Kong,Yuanjian Li,Shujun Zhao
Recycle/reversible adhesives have attracted considerable attention in recent years, while there still exist challenges to integrate excellent adhesion strength, switchability, and recyclability into adhesive system. Herein, a parallel dual-dynamic covalent network containing di-spiroborate and disulfide bonds is skillfully engineered to prepare epoxy adhesives (ERB x S y ) that realizes such an integrated performance portfolio. Interspersed cyclic di-spiroborate units together with phase-locked structure of disulfide bonds contributes for desired cohesive strength, and di-spiroborate units provide interfacial adhesion effect, thus synergistically optimizing interfacial and cohesive properties. Moreover, parallel crosslinking network offers orderliness to achieve fast relaxation behavior for high-effective reversible bonding and recyclability. Therefore, the adhesion strength of ERB x S y research 14.2 MPa along with debonding work of 5124.69 N m −1 . Moreover, the ERB x S y thermosets as hot-melt adhesives can be reused at least 6 times with a conservation up to 86.7% of initial adhesion strength, and it presents excellent chemically close-loop recycle performances by N , N -dimethylformamide solvent without damaging interior structure, mechanical and adhesion properties. This work provides a novel design approach for design and preparation of high-performance adhesives with circular life and exceptional adhesion properties.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 13.2
Siyi Liu,Xingbo Ge,Chao Lv,Ning Zeng,Zezheng Zhang,Qin Li,Jinguang Cai
Catalysts and catalytic electrodes for anion exchange membrane water electrolyzers (AEMWEs) face challenges including ionomeric binder instability, high cost of noble metal-based catalysts, and insufficient activity of non-noble metal alternatives. Herein, we report a low-cost strategy to prepare ultra-stable self-supported bifunctional iron phosphide (FeP) catalysts for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The catalysts were fabricated via facile high-temperature oxidation of industrial stainless-steel felts (SSFs) followed by phosphating. Oxidation promotes the following phosphidation with high surface area exposure and conducts robust interfacial bonding between the FeP layer and SSF substrate, ensuring stable operation at high current densities and long-term durability. Phosphidation optimizes the surface electronic structure and enhances the synergistic effect of multiple metals from SSFs, endowing the catalysts with excellent alkaline catalytic activity. Notably, FeP/SSF-700-5 exhibits superior bifunctional performance, achieving 10 mA cm −2 at overpotentials of 297 mV (OER) and 105 mV (HER). When used as the anode in an AEM electrolyzer, it reached the industrial current density of 1 A cm −2 at 1.7693 V; as the cathode, 1.8729 V was required for the same current density. Both configurations showed no obvious degradation after 4000 h electrolysis at 1 A cm −2 . When employed as both anode and cathode, FeP/SSF-700-5 enabled the electrolyzer to operate at 1.9414 V at 1 A cm −2 , with an ultra-low degradation rate of −3.8 μV/h. This study provides a high-performance, stable self-supported bifunctional catalyst, laying a solid foundation for the rational design of non-precious metal catalysts in large-scale industrial applications.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2026
·Vol. 31
·期 3
·396
·
IF 4.6
Yan Lu,Sen Zhang,Hong-Yan Ge,Han-Yue Yang,Feng Zhang,Yi-Fan Pan,Hong-Zhen Lian
Protein phosphorylation is a crucial post-translational modification that regulates protein activity, cellular signaling, transcriptional regulation, and cell cycle control. However, the analysis of phosphoproteins in biological samples is often compromised by complex sample matrices and interference from high-abundance proteins. While the top-down phosphoproteomics strategy enables comprehensive analysis of post-translational modifications based on intact proteins, its requirement for higher protein purity due to low protein ionization efficiency poses stern challenges. Consequently, developing appropriate enrichment methods for phosphoproteins in practical samples becomes essential. Immobilized metal ion affinity chromatography (IMAC) represents a common strategy for phosphorylated protein separation and enrichment. Among metal ions, Ti4+has gained widespread application as IMAC chelating ligands due to its capacity to form multiple coordination networks and its high selectivity for phosphorylated protein enrichment, leveraging the strong chelating ability of phosphate groups toward metal ions. This paper presents the design and preparation of a novel magnetic Ti-IMAC nanocomposite, MNP@MPTMS–VPA–Ti(IV). The material is modified with phosphate groups via facile thiol-ene click chemistry and then immobilizes Ti4+, enabling selective enrichment of intact phosphoproteins through IMAC affinity. The efficiency of enrichment was evaluated using subsequent matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for detection and analysis. This Ti-IMAC material-based magnetic solid-phase extraction (MSPE)-MALDI-TOF MS protocol has been successfully applied to enrich intact phosphoproteins in milk and eel mucus with high selectivity, sensitivity, and suitability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Polymers
·
2026
·Vol. 18
·期 2
·284
·
IF 4.9
Sheng Ye,Haijie Zhi,Wenqiang Wu,Sohail Yasin,Chaohua Gu,Jianfeng Shi,Sheng Zeng
Rubber materials undergo continuous wear in high-pressure seal applications. To address the risk of adhesive wear and consequent leakage of rubber seals operating under reciprocating sliding in high-pressure hydrogen storage and refueling systems, this study employed high-pressure hydrogen tribology testing. Ball-on-disk reciprocating tests were conducted using a 316L stainless-steel ball against silica-filled nitrile butadiene rubber (NBR), and the friction response and wear-morphology evolution were compared under ambient air, 1 MPa hydrogen (H2), 50 MPa H2, 50 MPa nitrogen (N2), and grease-coated conditions. Under dry sliding, the coefficient of friction (COF) of NBR in air and hydrogen ranged from 1.34 to 1.44, whereas it decreased markedly to 0.942 in 50 MPa N2. The wear volume under the four dry conditions was concentrated in the range of ~0.292–0.320 mm3. After grease coating, the steady-state COF in air and at 50 MPa H2dropped to 0.099 and 0.105, respectively, and the wear features changed from ridge-like wear patterns/tear pits to regular, smooth indentations with slight running marks. The results demonstrate that a lubricating film can effectively separate direct metal–rubber contact and suppress stick–slip, enabling a low-friction, low-wear, and highly stable interface in high-pressure hydrogen, and providing a practical engineering route for reliable operation of rubber seals in hydrogen service.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Minerals
·
2026
·Vol. 16
·期 1
·94
·
IF 2.2
Xiaoxu Yan,Suwei Yue,Zida Tong,Yuzhi Zhang,Yun Wu
Topaz is one of the most economically important fluorine-rich nesosilicates, which are predominantly colorless in natural crystals. Hence, the trade relies almost entirely on irradiated blue topaz with an unstable color center, which has been shown to fade over time. The cobalt (Co) diffusion treatment is a stable alternative process for converting colorless topaz to blue by a solid-state diffusion mechanism. To investigate the potential role of Co2+substitution in the formation of the blue layer and the coupled behavior of F/OH dehydroxylation in facilitating this process, systematic diffusion treatments have been successfully conducted and compared. In this study, gem-quality topazes were annealed in air at 1000 °C for 20–40 h (hr) along with CoO, Fe2O3, Cr2O3, and CuO powders. The diffused products were characterized using Scanning Electron Microscope (SEM), Ultraviolet-Visible absorption spectroscopy (UV-Vis), Near-Mid Infrared spectroscopy (NMIR), and X-ray photoelectron spectroscopy (XPS). Parallel runs with CuO, Fe2O3, or Cr2O3alone confirmed that none of these oxides produces a stable blue layer, underscoring the unique role of Co. The Co-diffused sample displays an intense blue layer characterized by a Co2+octahedral isomorphism triplet at 540, 580, and 630 nm, which are absent from both untreated and heat-only controls. XPS analysis reveals the emergence of Co2+(binding energy: 780.63 eV) and a concomitant depletion in F−, along with the disappearance of the OH overtone absorption at 7123 cm−1. These observations confirm that defluorination generates octahedral vacancies accommodated by the coupled substitution: CoF2(solid reactant) + (AlO2)−(fragment of topaz structure) → AlOF (solid product) + (CoOF)−(fragment of topaz structure). Prolonged annealing leads to decreased relative atomic percentages of K+and F−ions, consistent with volatilization losses during the high-temperature process, thereby directly correlating color intensity with cobalt valence state, which transfers from Co2+to Co3+. These findings establish a Co-incorporation chronometer for F–rich aluminosilicate systems, with an optimal annealing time of approximately 20 hr at 1000 °C. Furthermore, the above results demonstrate that the color mechanism in nesosilicate gems is simultaneously governed by volatile release and cation availability.
✓ 已验证
产品关联
DOI
高影响因子
Applied Sciences-Basel
·
2026
·Vol. 16
·期 2
·1137
·
IF 2.5
Linlin Zhang,Xiaomin Zhang,Fan Mo,Zhipeng Zhao
Fibrin clots with strain-hardening characteristics exhibit pronounced material nonlinearity and acoustic dispersion under ultrasound, leading to waveform distortion and shock formation during finite-amplitude wave propagation. However, peak-shock stress is limited by viscoelastic dissipation and dispersion, constraining the efficiency of ultrasound in applications such as thrombus ablation. To overcome this limitation, a shock wave amplification method using designed multi-wave-packet sequences is proposed. Based on a power-law model from quasi-static compression tests, shock generation under a single sinusoidal pulse was first simulated. The dual-wave-packet chasing strategy was then developed, in which the amplitude, frequency, and time delay of the second packet were tuned to achieve effective superposition with the precursor. The waveform superposition factor (WSF) was introduced for quantitative evaluation. Numerical results demonstrate that this strategy can significantly increase the peak-shock-wave stress, with a maximum gain of 22.7%. Parametric analysis further identified amplitude as the dominant factor influencing wavefront steepness and amplification effectiveness. This study provides a novel method and theoretical support for developing efficient and controllable ultrasonic sequences for thrombolysis.
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2026
·Vol. 16
·期 1
·103
·
IF 4
Hui Tang,Jiateng Hu,Qianqian Yang,Gang Yu
In the present study, glass/ceramic hybrid fibers were chosen as a paper matrix, which effectively balance toughness and high-temperature resistance for soot combustion applications. In order to address the issue of unevenness in the performance of paper-type catalysts caused by the differences in the dispersion behavior of glass fibers and ceramic fibers in water, a facile foam-forming technology was proposed. The obtained glass fiber/mullite composite paper with various mass ratios (1:1, 2:1, 3:1, 4:1, and 5:1) exhibit high evenness, and better high-temperature resistance than the pure glass fibers. After impregnating K-Mn active ingredients, 15K5Mn-GFF-3G1C (GF/CF = 3:1) demonstrates high tensile strength, excellent catalytic activity (T50 = 388 °C), reusability (five cycles), and high-temperature stability (800 °C, 12 h).
✓ 已验证
产品关联
DOI
高影响因子
Crystals
·
2026
·Vol. 16
·期 1
·68
·
IF 2.4
Mingxuan Deng,Yang Yu,Yunhao Wang,Zhuangzhuang Ma,Linyuan Lu,Tianhao Rui,Yulin Lan,Jiajun Linghu,Nannan Han,Yiyan Li,Zhipeng Li,Haibin Zhang
The discovery of cathode materials that simultaneously exhibit high oxygen-reduction activity, robust stability, and low cost is pivotal to moving solid oxide fuel cells (SOFCs) from the laboratory into commercial deployment. To address this challenge, we compile the largest perovskite dataset to date parameterized by the oxygen tracer surface exchange coefficient (k*). Using only readily obtainable elemental and structural descriptors, we develop machine-learning models that surpass existing approaches in both accuracy and computational efficiency. Specifically, by integrating Mahalanobis-distance-based applicability-domain analysis with random forest-enhanced property descriptors and support vector regression, we high-throughput-screen 1.3 million ABO3 compositions and curate a candidate list that balances thermodynamic stability, cost, and oxygen-reduction activity. Beyond prediction accuracy, SHAP interpretation reveals strong physical correlations between the enhanced descriptors andk*, highlighting the coefficient of thermal expansion, O p-band center, and A-site ionic radius as the dominant factors governing oxygen exchange kinetics. Finally, we identify 209 promising perovskite cathodes predicted to outperform LSC in the low-temperature regime, offering promising directions for experimental realization of practical low-temperature SOFCs.
✓ 已验证
DOI
高影响因子
SENSORS
·
2026
·Vol. 26
·期 2
·699
·
IF 3.5
Yixue Han,Zaihua Duan,Yi Wang,Weidong Chen,Di Liu,Zhen Yuan,Yadong Jiang,Huiling Tai
In recent years, electrochemical pressure (ECP) sensors with self-powered and both dynamic and static pressure detection capabilities have received widespread attention. To improve pressure sensing performances while reducing the thickness of conventional sandwich structure ECP sensors, we propose an ECP sensor with a simple electrode coplanar structure. Specifically, it consists of Cu/Zn foil electrodes and LiCl/polyvinyl alcohol (PVA) modified filter paper. Among them, the Cu/Zn coplanar electrodes are used for redox reactions, the LiCl provides conductive ions, and the PVA is used to provide a humid environment to promote the ionization and conduction of LiCl. The rough surface microstructure of the filter paper is used to enhance the pressure sensing performances of the sensor. The results show that the ECP sensor with an electrode coplanar structure can spontaneously output current in the pressure range of 0.4–100 kPa, with sensitivities of 0.273 kPa−1(0.6–20 kPa) and 0.036 kPa−1(20–100 kPa). Specifically, compared to ECP sensors with a sandwich structure, it has a wider response range and higher sensitivity. Through the current response, morphological characterizations, and redox reactions, the pressure sensing mechanism is elucidated. Furthermore, the proposed ECP sensor can be used for respiratory state recognition combined with machine learning. This research provides a new approach for developing a high-performance ECP sensor with a simple electrode coplanar structure.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Micromachines
·
2026
·Vol. 17
·期 2
·151
·
IF 3
Weilin Guo,Yanping Hu,Yunchao Cao,Hongbin Zhang,Hong Wang
Field-effect transistor (FET) biosensors enable label-free and real-time electrical transduction; however, their practical deployment is often constrained by the need for bulky benchtop instrumentation to provide stable biasing, low-noise readout, and data processing. Here, we report a portable extended-gate FET (EG-FET) integrated sensing system that consolidates the sensing interface, analog front-end conditioning, embedded acquisition/control, and user-side visualization into an end-to-end prototype suitable for on-site operation. The system couples a screen-printed Au extended-gate electrode to a MOSFET and employs a low-noise signal-conditioning chain with microcontroller-based digitization and real-time data streaming to a host graphical interface. As a proof-of-concept, enterohemorrhagicEscherichia coliO157:H7 was selected as the target. A bacteria-specific immunosensing interface was constructed on the Au extended gate via covalent immobilization of monoclonal antibodies. Measurements in buffered samples produced concentration-dependent current responses, and a linear calibration was experimentally validated over 104–1010CFU/mL. In specificity evaluation against three common foodborne pathogens (Staphylococcus aureus,Salmonella typhimurium, andListeria monocytogenes), the sensor showed a maximum interference response of only 13% relative to the target signal (ΔI/ΔImax) with statistical significance (p< 0.001). Our work establishes a practical hardware–software architecture that mitigates reliance on benchtop instruments and provides a scalable route toward portable EG-FET sensing for rapid, point-of-need detection of foodborne pathogens and other biomarkers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2026
·
IF 17.2
Diankun Song,Yunyun Wu,Jiahui Hua,Chunfeng Shao,Zhaoyang Wei,Jianji Wang,Kai Dai
Imidazolium-based ionic liquids (ILs) exhibit great potential in promoting electrochemical CO 2 reduction reaction (CO 2 RR) by reducing overpotential reduction and enhancing catalytic efficiency. However, the regulatory role of ILs structure in the local physicochemical region at the electrode/electrolyte interface and in reaction kinetics remain unclear. In this study, we designed imidazolium-based ILs with tunable cation alkyl chain length and systematically revealed the dynamic interfacial regulation mechanism controlled by cation structure, based on in-situ infrared spectroscopy and molecular dynamics simulations. The commercial Ag electrodes in electrolytes with critical chain length exhibit nearly 100% Faradaic efficiency for CO production while maintaining high current density. Imidazolium cations with critical chain length effectively regulate the electric double layer at the Ag electrode/electrolyte interface: they notably balance a range of positive and negative factors, including hydrophobicity, CO 2 absorption, conductivity, viscosity, and hydrogen evolution reaction, etc . Collectively, these effects synergistically shape an optimized interfacial local physicochemical region, enhancing the rate of CO 2 catalytic reactions. This work elucidates the mechanistic framework of interfacial regulation in CO 2 RR and delivers molecular design principles for engineering IL-based electrolytes toward enhanced catalytic selectivity.
✓ 已验证
产品关联
DOI
高影响因子