文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第5749至5760个,产品总数347,550个

切换升序
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Optimized Carrier Concentration and Reduced Thermal Conductivity in Cu-Deficient CuGaTe2 Alloyed with AgSbTe2 for Superior Thermoelectric Performance

Simin Zhang,Suiting Ning,Xinran Hu,Zhangheng Lai,Wenzeng Zhao,Hailin Liu,Yichu Wu,Zhiquan Chen

As a mid-temperature thermoelectric material, CuGaTe2 features a distinctive crystal structure, environmentally friendly and high tunability, all of which contribute to its promising thermoelectric performance. However, due to its intrinsically low electrical conductivity and high lattice thermal conductivity, the thermoelectric performance of pristine CuGaTe2 is unsatisfactory. In this work, Cu-deficient Cu0.96GaTe2 was alloyed with different contents of AgSbTe2 via a combined approach involving melting, ball milling, and spark plasma sintering. The Cu-poor condition introduces Cu vacancies, thereby providing more hole carriers. AgSbTe2 alloying leads to a further increase in the carrier concentration. Despite of the decrease in carrier mobility, the electrical conductivity was evidently enhanced. On the other hand, Sb doping increases the density of states at the Fermi level, leading to enhancement of the Seebeck coefficient. Moreover, Cu vacancies and AgSbTe2 alloying both cause a significant decrease in sound velocity, thereby decreasing the lattice thermal conductivity to an ultralow value of 0.29 W m–1 K–1 at 743 K. Finally, the optimized (Cu0.96GaTe2)0.9(AgSbTe2)0.1 sample demonstrates the highest thermoelectric performance, achieving an average zT of 0.41, which represents a 215.4% improvement over pristine CuGaTe2. Its peak zT reaches 1.39 at 743 K, corresponding to a 124.2% improvement relative to pristine CuGaTe2.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
BIOMACROMOLECULES · 2026 · IF 5.9

Degradation-Function Coupling in Eugenol-Functionalized PLGA Polyurethanes for Antifouling Interfaces

Chunying Si,Yunbiao Qi,Haoyi Wang,Quanxing Zhang,Wei Jiang

The development of biodegradable antifouling coatings represents a promising route to environmentally compatible marine protection. However, most polyester-based systems exhibit limited interfacial evolution and a poor long-term biofouling resistance. Here, we report poly(lactic-co-glycolic acid) (PLGA)-based polyurethane (PU) coatings that bear covalently tethered eugenol (EU) side groups (PLGA–PU-EUx), designed to couple hydrolytic degradation with interfacial bioactivity. Compared with PLA-based analogues, the PLGA–PU-EUx coatings show greater mass loss, lower water contact angles during seawater immersion, more evident chemical and morphological evolution, and markedly enhanced inhibition of marine bacteria (Micrococcus luteus) and diatoms (Navicula incerta). At 15 wt % EU, diatom inhibition exceeds 95%. Leachate analysis indicates that freely dissolved EU-related species are highly limited under the tested conditions, while zebrafish embryo assays show no obvious acute developmental toxicity. These findings establish degradation-function coupling as a general strategy for designing durable and environmentally benign antifouling interfaces.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Electronic Materials · 2026 · IF 4.7

Optimization of Energy Storage Performance in Sandwich-Structured PVDF-NBT/BN Composite Films

Haoran Chen,Jincong Zhang,Tingwei Mei,Tian Zhang,Yong Zhang

With the continuous advancement of modern electronics and power equipment, there is a growing demand for film capacitors with higher dielectric constants and discharge energy densities. In this study, we fabricated a sandwich-structured thin film using polyvinylidene fluoride (PVDF)-bismuth sodium titanate (NBT) as the outer layers and boron nitride (BN) nanosheets as the intermediate layer. The PVDF-NBT layers enhance the material's polarization strength and dielectric constant, while the BN layer ensures its breakdown strength and insulation properties. With an optimal composition of 6 wt % BN and 3 wt % NBT, the composite film achieves an energy storage density of 13.2 J cm−3 and a breakdown strength of 5000 kV/cm while maintaining a low dielectric loss of approximately 0.02 at 1000 Hz. These results indicate that the proposed composite structure holds great promise for applications in dielectric energy storage.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Polymer Materials · 2026 · IF 5.2

Dual-Function Design of Anisotropic Nanocellulose Sponge for Thermal Management and PCM Encapsulation

Qin Qin,Gaigai Duan,Bin He,Yong Huang,Mei Li,Xiaoshuai Han,Shuijian He,Shaohua Jiang

This study demonstrates a strategy for fabricating anisotropic cellulose nanofibril (CNF) sponges with precisely tailored microstructures via directional freezing. By decoupling the effects of solid content and freezing temperature, we reveal their distinct and synergistic roles in governing the final microstructure: solid content primarily dictates the framework density and porosity, while freezing temperature strongly governs the pore dimensions. This mechanistic understanding enables the rational and orthogonal optimization of multifunctional performance, achieving both high thermal insulation (axial: 46.1 mW m–1 K–1, radial: 42.4 mW m–1 K–1) and superior phase change material encapsulation (98.49% loading efficiency, 1.96% leakage rate). The resulting phase change composite material exhibits a high enthalpy of 186.2 J g–1, demonstrating excellent thermal energy storage capacity. This work provides a design blueprint for developing sustainable, high-performance thermal management materials from renewable nanocellulose.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ENERGY & FUELS · 2026 · IF 6

All-3D-Printed Flexible Zn-Ion Hybrid Micro-Supercapacitors Enabled by Hierarchical Conductive Networks for Ultrahigh Areal Capacitance

Kang Xu,Dingbang Niu,Li Deng,Xu Zhang,Juan Yang,Pengjun Ma,Yi Zhang,Bo Shi,Bingjun Yang

3D-printed flexible zinc-ion hybrid microsupercapacitors (ZHMSCs) show immense promise as emerging energy storage units for flexible microelectronic systems, delivering intrinsic safety, high theoretical capacity, and designable architectures. However, the low intrinsic conductivity of electrode materials and the significant interfacial contact resistance hinder the development of all-printed devices with superior areal capacitance and power density. In this study, a hierarchical conductive optimization strategy is proposed to construct a high-performance flexible ZHMSC via a fully 3D-printing process. At the microscale, highly conductive PEDOT:PSS (PH1000) is introduced as an intercalation agent into the Ti3C2 MXene cathode, effectively suppressing the restacking of MXene layers and constructing efficient ion transport channels. At the macro scale, the interface contact resistance is effectively reduced by in situ printing of the silver current collector. The device exhibits excellent electrochemical performance enabled by a directly printable, high-mass-loading zinc-based composite anode and a water-retentive ZnSO4/hyaluronic acid gel electrolyte. The fabricated flexible ZHMSC delivers a remarkable areal capacitance of 1199.5 mF cm–2 and an energy density of 326.5 μWh cm–2. Moreover, the device demonstrates excellent cycling stability with 82% retention of the initial capacitance after 9000 cycles. This work confirms the effectiveness of a hierarchical conductive network design in enhancing all-printed energy storage and provides an efficient, scalable manufacturing paradigm for the next generation of integrated flexible micropower systems.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MACROMOLECULES · 2026 · IF 5.7

Biobased, High-Performance Fully Alicyclic Copolycarbonates

Yaning Wang,Mengwei Du,Ting Xu,Fenghuan Yang,Mingfa Guo,Ruimin Xie,Rongliang Wu,Huaping Wang,Jing Wu

To advance the development of sustainable high-performance polycarbonates, a series of novel copolycarbonates (PITCs) were designed and synthesized using two biobased alicyclic building blocks: isosorbide (IS) and 2,5-tetrahydrofurandimethanol (THFDM). The target polycarbonates were prepared via melt polymerization, yielding materials with number-average molecular weights ranging from 51,600 to 75,500 g/mol. By integrating density functional theory calculations with kinetic studies, we elucidated the reaction mechanism and monomer reactivity, confirming that intermolecular interactions between the building blocks promote polymerization efficiency. Notably, the incorporation of THFDM significantly enhanced the cohesive energy density of the PITC matrix, enabling PI89T11C and PI70T30C to achieve balanced performance: high glass transition temperatures (Tg) of 151.2 °C and 115.8 °C, respectively, superior tensile strength (74–75 MPa), and excellent elongation at break (70–92%). In contrast, PITCs with high THFDM content (≥90 mol %) exhibited exceptional flexibility, with elongation at break values ranging from 900% to 1600%. Additionally, all PITCs maintained high transparency (∼93% light transmittance) and elevated biobased content (82–84%). These biobased, high-performance copolycarbonates thus hold significant promise for the development of eco-friendly and sustainable advanced engineering materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Engineering Atomically Dispersed Cu Sites Confined in Hierarchical Silicalite-1@La2O3@Silicalite-1 Architecture for Spatiotemporal Decoupling of Bioethanol Upgrading

Ming Zhang,Guoli Fan,Liyuan Yuan,Feng Li

Bioethanol upgrading to higher alcohols (C4–10–OH) involves several sequential reaction steps occurring at multiple different active sites. Therefore, precisely engineering heterogeneous catalysts with appropriate local chemical structures of active sites and spatial environments is highly desired for efficient ethanol tandem conversion. Herein, we constructed a novel Cu-based catalyst featuring atomically dispersed Cu sites confined in a hierarchical silicalite-1@La2O3@silicalite-1 architecture, where single Cu atoms were confined in the micropores of surface silicalite-1 (S-1) zeolite nanoislands dispersed on the outer La2O3 layer encapsulating a hollow S-1 zeolite core. By modulating the content of Cu and La species, such a constructed multihierarchical Cu@S-1@La2O3@S-1 catalyst exhibited excellent performance in ethanol conversion to higher alcohols, along with an impressively high ethanol conversion of 74.9% and C4–10–OH selectivity of 85.0%, as well as an unprecedentedly high production rate of higher alcohols (10.575 mol·gCu–1·h–1) at 275 °C, far exceeding those over state-of-the-art Cu-based catalysts. It was elucidated that surface single-atom Cu sites first notably promoted the adsorption and activation of ethanol and thus initiated its dehydrogenation to produce acetaldehyde, and subsequently, acetaldehyde intermediates migrated to the outer La2O3 layer featuring abundant medium-strength basic and acidic sites, thereby facilitating the condensation of acetaldehydes and their further dehydration. This work provides an innovative approach for rationally designing high-performance supported Cu catalysts with a spatiotemporal decoupling structure applied in advanced heterogeneous tandem catalytic processes through the design of site-specific confinement within hierarchical structures.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL EDUCATION · 2026 · IF 3

Visualization of the Effects of Hydrogen Bonding in Self-Healing Hydrogel

Xiaojie Zhang,Chenmin Zhang,Yanfang Hao,Xuechang Song,Xiaohui Ji,Xiangfu Meng,Yanhong Ji

The research develops an instrument-free classroom demonstration using a self-healing hydrogel to visualize hydrogen bonds (H-bonds) interactions. Students directly experience the re-formation and breaking of H-bonds through cutting and stretching cycles, thereby gaining an intuitive sense of their tangible strength. Tailored for different educational levels, high school students grasp H-bond formation through autonomous self-healing, while university students connect fundamental chemistry to polymer science via macroscopic evidence. Student feedback from classroom implementation with over 2000 high school students indicated notable differences in self-reported understanding: the proportion of students who reported correctly identifying H-bonds as interaction forces was 91.7% in the demonstration group, compared to 50.3% in traditional lecture settings. This work provides educators with an accessible platform to bridge macroscopic phenomena and molecular interactions, achieving visualization without expensive instruments.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COLLOID AND POLYMER SCIENCE · 2026 · IF 2.9

Cyclodextrin-based pH-responsive and long-circulating nanoparticles for efficient delivery of protein

Li Hang,Zhao Jing,Geng Huili,Chen Zihan,Wang Yurui,Liang Fei

Protein and polypeptides drugs require frequent administration due to low bioavailability and poor stability, leading to reduced patient compliance. We developed a nano-delivery system for the efficient delivery of bovine serum albumin (BSA) based on carboxymethyl-β-cyclodextrin (CM-β-CD) and polyethylene glycol-grafted chitosan (CS-g-mPEG) via polyelectrolyte complexation method. The effects of factors such as volume ratio, pH and grafting degree on particle size, stability, and drug release behavior were investigated. Under optimal conditions, the size of nanoparticle was 223 nm with polydispersity index of 0.131, and the Zeta potential was + 23.86 mV. In vitro release studies demonstrated the nanoparticles can achieve pH-responsive drug release, with release rate of 74.3% in simulated intestinal fluid (pH = 6.8), following the Ritger-Peppas model. Moreover, this nano drug carrier exhibits excellent biocompatibility and long-circulation performance, providing a novel strategy with potential applications for protein drug delivery.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE · 2026 · IF 2.6

Synergistic Effect of Multi-dimensional Magnetic Intrinsic Absorption and Porous Structure Scattering for Efficient Microwave Absorption

Li Ye,Wei Mengting,Li Zhuan,Luo Heng,Hu Chun,Yang Junliang,Li Jing

Wireless communication technology permeates modern society, with low-frequency bands such as the C-band (4–6 GHz) serving as primary operational frequencies. The potential environmental impact of microwave radiation from these bands has garnered significant attention. However, the longer wavelengths characteristic of low-frequency signals necessitate larger absorber dimensions, presenting a critical challenge for developing lightweight microwave absorption materials. Herein, the design idea of synergizing the intrinsic absorption of multi-dimensional magnetic powder and the scattering mechanism of microporous structure was proposed. Lightweight porous polyurethane (PU) composites co-modified by the flaky carbonyl iron (FCI)/spherical carbonyl iron (SCI) were successfully obtained by a one-step foaming method. The FCI/SCI/PU achieved a minimum reflection loss per unit density of − 44 dB·cm 3 /g. This composite foam material shows advantages of easy preparation, low cost, and excellent low-frequency absorption performance, which has a great application prospect in creating an electromagnetic clean and safe environment. Meanwhile, this coordinated design strategy of magnetic constituents and microporous structures provides a reference for the development of low-frequency microwave absorption materials.

CAS / MDL: 102-71-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Water Chemistry and Technology · 2026 ·Vol. 48 ·期 3 ·279-285 · IF 0.9

Preparation of a Novel Triazine-Based Dithiocarbamate for Removing Lead Ions from Water

Xuefeng Li

A novel triazine-based dithiocarbamate (DTC) was synthesized using cyanuric chloride, ethylenediamine and carbon disulfide as raw materials. The DTC product was characterized by Fourier Transform infrared spectroscopy (FTIR) and elemental analysis, and its performance in removing lead ions from water through chelating-type adsorption was evaluated. Characterization results demonstrate the successful synthesis of the target product DTC. The lead ion removing ratio was shown to increase with pH value (2–6), removing time (0 to 160 min) and adsorbent dosage (0–4 g L –1 ), and then keep almost unchanged when further increasing their values. However, the removing ratio was found to decrease with the increase of initial lead ion concentration. Meanwhile, the removal quantity decreased with adsorbent dosage and increased with initial lead ion concentration. The DTC product achieved 97.2% removing ratio under the condition of pH 6, removal time 160 min, adsorbent dosage 4 g L –1 , and initial lead ion concentration 40 mg L –1 . The relationship between removal quantity and equilibrium adsorption concentration showed a good fit with the Langmuir-type adsorption isotherm equation ( R 2 = 0.994) while a poor fit with the Freundlich equation ( R 2 = 0.961). This indicates that the lead ion adsorption on the prepared adsorbent corresponds to a monolayer coverage resulting from the chelating-type chemical adsorption on the DTC groups, namely the adsorption active sites. These results suggest the potential application of this novel DTC for removing heavy metals in the field of water treatment.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Food Measurement and Characterization · 2026 · IF 3.6

pH-sensitive intelligent film for visual freshness monitoring of meat and aquatic products

Yang Jing,Wang Qiying,Liu Zitian,Lin Ligang,Tang Fengling,Xu Meina,Yang Xu,Cheng Qi,Ma Wensong,Shang Huiyang,Wu Hao

With the increased demand for food safety, how to detect food spoilage in real time is widely researched. A intelligent film of konjac glucomannan (KGM)/sodium alginate (SA)/carboxylated cellulose nanofibers (CCN) with varying concentrations of Roselle extracts (REs) (KSC/REs) were prepared in this work. The physicochemical properties, functional properties and practical applications of the KSC/REs film were systematically evaluated. Specifically, FT-IR, XRD, XPS and SEM analyses indicate that rare earth elements (REs) have successfully incorporated into the KSC film via hydrogen bonding. In addition, REs enhance the film's thickness, tensile strength, antioxidant activity and thermal stability through hydrogen bonding interactions. As the concentration of REs increased, the film's transmittance (TS) rose by 357%, while its water vapour permeability (WVP) decreased by approximately 44%. The KSC/REs films with varying concentrations of REs could exhibit pH-responsiveness in different pH environments. Notably, the KSC/REs films could detect the metamorphosis of chicken, pork, and shrimp through color change and the results became more pronounced with the concentration of REs. Through the membrane's ΔE value, it was found that at different pH levels, the ΔE value of the KSC/RES-12 membrane was generally around 10 greater than that of the KSC/RES-3 membrane. This indicates that increased concentrations of REs result in more pronounced colour changes in the membrane. Briefly, a bio-based intelligent packaging film was developed in this work, demonstrating potential applications in meat freshness monitoring.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。