Road Materials and Pavement Design
·
2026
·
IF 3.6
Yujuan Zhang,Qinghao Ji,Chen Sun,Peng Xiao,Yao Zhang
This study employed chemical methods to prepare crumb rubber (CR) and polyethylene glycol (PEG) composite (CR-PEG) for the modification of asphalt with phase change temperature regulation function. The microstructure and composite mechanism of CR-PEG, properties and temperature regulation function of CR-PEG modified asphalt (CR-PEG-MA) were systematically investigated in details. The results demonstrate that hexamethylene diisocyanate (HDI)facilitated the chemical complexation between CR and PEG and altered the crystal structure of PEG. As PEG molecular weight increases, the onset temperature and enthalpy of phase transition initially increase before decreasing at molecular weight of 1000. The higher the PEG content, the lower the starting temperature of phase transition and the greater the enthalpy of phase transition. CR-PEG in asphalt begins to exhibit phase change temperature regulation around 50°C. CR-PEG-MA achieves optimal comprehensive performance with 3 wt% PEG6000. Moreover, it is an effective strategy to reduce PEG leakage risk by chemically fixing PEG in CR phase.
✓ 已验证
DOI
高影响因子
ENERGY & FUELS
·
2026
·
IF 6
Qian Xie,Haiqing Zhang,Li Liu,Hui Chen,Zheng Chen,Yongping Huang,Keru Xiao,Caili Dai,Yining Wu
Preferential flow channels significantly diminish the sweep efficiency of displacement fluids. Polymer gel particles are commonly employed as in-depth profile control agents to block these high-permeability pathways, thereby improving sweep efficiency and enhancing oil recovery. However, conventional gel particles expand relatively quickly during the initial stage of injection. This characteristic is considered unfavorable for the in-depth migration of gel particles into the formation. Additionally, formation shear forces acting on the swelled particles can degrade the gel structure, thereby hindering effective plugging. Moreover, the electric interaction of gel particle functional groups is compressed by metal salt ions in formation water, reducing their final swelling factor. To address these challenges, this study developed a novel core–shell structured gel particle that combines a delayed swelling mechanism with a sodium alginate-based multicross-linked network. This integrated design not only improves in-depth migration but also significantly enhances shear and salt resistance. The surface shell layer limited the initial swelling rate of the gel particles─the swelling onset was delayed from 3 days to 12 days, and the time to reach maximum swelling was extended to 28 days with increasing shell thickness─thereby facilitating in-depth migration. The core exhibited a volume swelling factor exceeding 20 in high-salinity formation water (18 × 104 mg/L) at 70 °C after the addition of sodium alginate. Atomic force microscopy (AFM) was employed to measure the Young’s modulus of different gel particles. Results indicated that sodium alginate-enhanced gel particles exhibited a higher Young’s modulus than conventional gel particles, with minimal variation after shear, confirming their superior resistance to shear degradation. Core flooding experiments further demonstrated the particles’ migration and permeability control capabilities. Before shell degradation, the permeability reduction rate was below 20%, whereas after degradation, it exceeded 90%. These core–shell gel particles show great potential for enhancing oil recovery by enabling efficient in-depth permeability control.
✓ 已验证
DOI
高影响因子
BIOMACROMOLECULES
·
2026
·
IF 5.9
Tianyuan Xiao,Lu Wu,Zhewen Zhang,Lingzhi Huang,Qiu Fu,Xuanjia Yu,Jiahao Yang,Rongkai Yang,Guohua Dong,Haiqiang Shi
Conventional adhesives typically rely on toxic reagents such as phenol and formaldehyde, forming irreversible covalent networks upon curing. In this study, highly reactive uncondensed lignin was prepared using a green solvent, followed by epoxidation to facilitate its nanoscale formation. Subsequently, the lignin was copolymerized with dithiol borate, polyethylene glycol was incorporated to modulate the flexibility of the covalent adaptable network, thereby constructing a lignin-based vitrimer solid adhesive (LVSA). In particular, the dry and wet bonding strengths of VD3H3 adhesive to bamboo strips reached 19.16 and 11.70 MPa, respectively. This LVSA features thermal processability, recyclability, and photothermal conversion performance. Moreover, the functional chain segments facilitate the lignin adhesive to exert a gas-phase-solid-phase flame-retardant mechanism, with a limiting oxygen index (LOI) of 43.8%. This work presents an design strategy for the development of high-strength, recyclable, and multifunctional green LVSA, paving the way toward a approach for the high-value utilization of lignin.
✓ 已验证
DOI
PubMed
高影响因子
ACS Sensors
·
2026
·
IF 10.9
Fan Shi,Shu Deng,Lianjin Jiang,Jidie Tao,Yongfa He,Jinju Zuo,Brij Mohan,Wei Sun,Qiantao Ma
Chlorogenic acid (CGA) has antibacterial, antiviral, and antioxidant properties, making its detection essential in food science, pharma, and environmental monitoring. Nevertheless, the mechanistic understanding of CGA recognition and redox behavior at electrochemical sensor interfaces remains limited, posing a key scientific challenge. Herein, a novel Fe-N4 diatomic-site carbon nanomaterial is prepared via in situ pyrolysis of coffee grounds, which served as a simultaneous precursor for carbon, iron, and nitrogen. Aberration-corrected scanning transmission electron microscopy confirms single-atom dispersed iron with diatomic active sites. At the same time, X-ray absorption near-edge structure and extended X-ray absorption fine structure analyses reveal a Fe–N4 coordination. Density functional theory calculations indicate that during CGA oxidation, hydroxyl oxygen atoms preferentially adopt a side-adsorption configuration at dual active sites, thereby enhancing interfacial electron transfer and catalytic selectivity. The constructed electrochemical sensor exhibits two linear response ranges, 0.2−0.8 and 0.8−500.0 μmol/L, with a detection limit of 0.067 μmol/L (LOD = 3 s/m). Overall, this study presents a sensitive, cost-effective electrochemical sensor for CGA detection and highlights the critical role of adsorption configuration in determining the performance of single-atom catalysts.
✓ 已验证
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·
IF 7.6
Jiaqi Yang,Qin Zhang,Ke Wang,Dongxing Song,Ruijie Wang
The low reliability of anode-supported solid oxide fuel cells (ASOFCs) under reoxidation severely limits their commercialization. Among degradation mechanisms, interfacial delamination induced by reoxidation of Ni-based anodes is a key driver of performance deterioration. Here, the reoxidation process is reformulated as an intrinsic material state variable. A cohesive zone model (CZM) describes the initiation and propagation of the resulting interfacial delamination, and the mixed-mode cohesive parameters of the interface are experimentally calibrated through four-point bending tests. The resulting delamination is further integrated with a computational fluid dynamics (CFD) model to reveal the influence of interfacial structural evolution on the electrochemical behavior of the cell. The results show that delamination initiates when the oxidation degree reaches 0.23 and increases to 26.4% under complete reoxidation. Within the retained-anode-activity assumption adopted in the electrochemical assessment, this structural damage amplifies transport-related ohmic polarization and induces localized deactivation of electrochemical reactions, ultimately leading to a delamination-related maximum power output loss of 20.39%. The study establishes an experimentally calibrated CZM-CFD integrated analysis framework that enables quantitative characterization of reoxidation-induced interfacial delamination and associated performance degradation, evaluates the regulatory potential of multiscale engineering parameters on delamination evolution, and provides guidance for assessment, structural design, and mitigation of reoxidation degradation in ASOFCs engineering applications.
✓ 已验证
DOI
高影响因子
ACS Applied Energy Materials
·
2026
·
IF 5.5
Weixu Tian,Junyun Zhang,Yue Yu,Zhihua Wen,Jinjin Song,Di Pan,Dawei Li,Jing Li,Sunhee Lee,Jingye Jin,Chenhong Lang
The efficient conversion of ambient acoustic energy into electrical power has attracted considerable research interest for its potential to sustainably power microelectronics and self-powered sensors. Nevertheless, the development of an acoustoelectric transducer that simultaneously delivers broadband response, high conversion efficiency, and substantial power output remains a pressing challenge. Herein, we report a broadband high-output acoustoelectric transducer. The device architecture features an electrospun barium titanate (BTO)/poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) nanofiber membrane, sandwiched between two gold-coated poly(ethylene terephthalate) electrodes with a precisely engineered air spacer. Upon acoustic wave excitation, the membrane and electrode exhibit contact-separation motion, simultaneously exciting both piezoelectric and triboelectric effects. The optimized device, comprising a 0.5 mm air spacer and a 3% BTO-doped PVDF-HFP nanofiber membrane, achieves a peak output of 410.28 V and 50.24 μA under 115 dB acoustic excitation at 170 Hz. The instantaneous maximum power density reaches 11576.12 μW/cm3 (the peak surface power density is 845.06 μW/cm2). The electrical energy generated can directly power miniature electronic devices without additional energy supplying equipment. This structure effectively converts acoustic waves into an electric signal from 1 to 5000 Hz (including infrasound). Therefore, the device holds potential for detecting and warning against natural disasters associated with infrasound emissions. This acoustoelectric transducer thus exhibits promising application prospects in noise energy recovery, environmental monitoring, self-powered systems, speech recognition, and human-computer interaction.
✓ 已验证
DOI
高影响因子
ACS Applied Energy Materials
·
2026
·
IF 5.5
Jiaoyang Shen,Hehe Ren,Jian Zou,Xin Guo,Yuanjie Wei,Quancai Li,Jing Liang,Wei Wu
Aqueous symmetric sodium-ion batteries (ASSIBs) are gaining attention as attractive energy storage devices for flexible and wearable electronics due to their excellent structural stability, inherent safety, environmental friendliness, and the abundant sodium resources. NASICON-structured Na2VTi(PO4)3 (NVTP) features a three-dimensional framework structure; Ti4+/Ti3+ and V4+/V3+ redox couples can be used to fabricate symmetrical sodium-ion batteries as both the anode and the cathode. However, poor cycle stability and irreversible dissolution in aqueous solutions limit the application of NVTP in flexible ASSIBs. Herein, the Na1.9K0.1VTi(PO4)3-10% GNP (NKVTP-GNP) composite was synthesized by partially substituting Na+ in Na2VTi(PO4)3 with K+ and coating graphene nanoplatelets (GNP). The K+ doping and GNP coating successfully promoted the conversion of V4+ to V5+ and enhanced the cycling stability of the materials. The capacity retention rate of the NKVTP-GNP cathode is 99% after 1000 cycles, while the anode maintains 81% of its capacity after 500 cycles. Additionally, a flexible symmetric battery NKVTP-GNP//NKVTP-GNP was fabricated via a screen-printing technique, which delivered a wide voltage window of 1.8 V, an energy density of 63 Wh kg−1, and excellent cycling stability, retaining 90% of its capacity after 2000 cycles at 10 C. More importantly, the battery shows high flexibility, adjustable shapes, and high-throughput manufacturing. This work provides insights into the development of high-performance flexible ASSIBs.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·
IF 7.6
Zhenyu Hu,Xiaoqing Jin,Mingqi Xu,Xinyang Leng,Yu Zhang,Biao Tang,Wanqiang Liu,Tai Peng
This work introduces a novel oxygen-assisted vermiculation treatment, marking the first application of the vermiculation concept in optimizing the Cu1.92S cathode surface, significantly enhancing the performance of aqueous hydrogen proton batteries (AHPBs). Due to their nonstoichiometric structure and strong electron–ion migration capabilities, Cu1.92S cathodes were facing challenges such as tip discharge, surface dissolution and collapse, and self-discharge. To address these issues, a 30-day aging treatment in an oxygen-rich environment was employed to induce surface vermiculation. The findings reveal three major improvements postvermiculation: (1) the elimination of tip discharge effects, reducing hydrogen evolution reaction (HER); (2) the enhancement of the work function, suppressing electron escape and lowering self-discharge; (3) the strengthening of hydrogen proton adsorption, significantly boosting charge storage capacity, reaction kinetics, and cycling stability. After the vermiculation treatment, the specific capacity of Cu1.92S increased from 506.5 to 561.2 mAh g–1, the cycling life extended from 1600 to 2400 cycles, and charge–discharge efficiency improved. This study provides a simple and scalable post-treatment method for the surface modification of copper sulfide-based cathodes, laying the foundation for the development of high-performance and long-life aqueous energy storage systems.
✓ 已验证
DOI
高影响因子
JOURNAL OF PHYSICAL CHEMISTRY B
·
2026
·
IF 3.2
Yongchun Tan,Cheng Wang,Ziyi Wang,Qin Yu,Han Pan,Xiya Peng,Jian Luo
Fisetin is widely employed as a natural fluorescent probe for sensing local environmental dynamics in micelles and membranes, owing to its large Stokes shift emission arising from excited-state intramolecular proton transfer (ESIPT) and the characteristic fluorescence of its anionic form. In contrast to the extensive studies on the ESIPT of neutral fisetin, the ESIPT processes in fisetin anions have received much less attention. In this work, we incorporated 3-hydroxyflavone and fisetin into two poly(vinyl alcohol) (PVA) films that were codoped with oxalic acid and dimethyl sulfoxide, respectively. Anionic 3-hydroxyflavone and fisetin species formed in the films, as evidenced by an increased absorption in the visible spectral region. Dual emission was achieved in the PVA films upon visible-light excitation, originating from the normal and ESIPT tautomer species of divalent fisetin anions. The ESIPT barrier heights for these anions, calculated using time-dependent density functional theory, are comparable to that of neutral fisetin. This study confirms the microbasicity of PVA films and provides fundamental insight into the ESIPT process of deprotonated fisetin, offering a clear basis for its application as a microenvironmental probe in soft matter systems.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2026
·
IF 5.5
Tingting Yang,Yufei Li,Liwei Lu,Jianghua Du,Xin Guo
Achieving efficient and stable solar-driven photocatalytic water splitting for hydrogen production requires simultaneously overcoming the issues of insufficient charge separation at the microscopic scale and difficult catalyst recovery at the macroscopic scale. In this study, an S-Scheme ZnCdS/CoS2 heterojunction catalyst was integrated into a PVDF/PVP/TiO2 electrospun fiber membrane via electrospinning technology, constructing a catalytic material that combines microscopic heterojunctions with a macroscopic membrane structure to realize synergistic enhancement between the microscopic heterojunction and the macroscopic assembly. At the microscopic level, the S-scheme heterojunction promotes the separation of photogenerated charge carriers through an internal electric field, thereby increasing the hydrogen production rate to 36.47 μmol/mg, which is 5 times higher than that of pure ZnCdS catalyst. At the macroscopic level, the PVDF/PVP/TiO2 electrospun fiber membrane provides a stable support for the ZnCdS/CoS2 S-scheme heterojunction, increasing active sites while enabling easy recovery. The hydrogen production efficiency of this fiber membrane is 2.3 times that of the powdered ZnCdS/CoS2 heterojunction, with an activity retention rate of 90.7% after repeated use. This study’s strategy of combining heterojunctions with electrospinning offers a feasible approach to simultaneously enhance the hydrogen production efficiency, stability, and recyclability of photocatalytic systems.
✓ 已验证
DOI
高影响因子
CHEMISTRY OF MATERIALS
·
2026
·
IF 7.1
Shiyue Sun,Jie Zhu,Tingting Li,Shaolin Du,Yunzhe Ke,Chenfei Yang,Yajing Sun,Xiaotao Zhang,Shuaishuai Ding,Wenping Hu
The design of molecular magnets with programmable spin states at room temperature is challenging for quantum materials. Although organic charge transfer (CT) cocrystals offer a promising framework for tuning spin states through electronic coupling, the deliberate design of donor (D)-acceptor (A) pairs and based on orbital-regulation strategy to mediate effective magnetic interactions has remained unexplored. Here we prove that CT cocrystals provide a platform where metal orbital characteristics govern magnetic strength, while the ordered CT lattice mediates long-range exchange interactions to support collective magnetic ordering. We obtained C60-H2TPP, C60-CuTPP, C60-CoTPP with successively increasing ferromagnetism at 300 K. Through orbital-regulation strategy, the substitution of metal ion Cu2+ with Co2+ precisely reorients the unpaired electron orbital from an alignment parallel to the donor molecule plane to one that points directly toward the C60 molecule. This spatial orientation leads to a significant enhancement in saturation magnetization, revealing that the orbital orientation of the D and A molecules can systematically govern the ferromagnetic ground state in cocrystals. Our results support orbital-regulation strategy as an effective design principle for room-temperature molecular magnets, with implications for spintronic applications based on organic quantum materials.
✓ 已验证
DOI
高影响因子
ACS Omega
·
2026
·
IF 5.2
Kaiqin Xie,Yinfeng Xu,Hao Ren,Zihong Dong,Yilin Li,Hua Dong
Traditionally, the efficiency of water flooding for oil recovery has been attributed to whether the formation is “water-wet” (hydrophilic) or “oil-wet” (oleophilic). However, water flooding is fundamentally a process in which the aqueous phase displaces the oil phase from the rock surface, involving the replacement of the “oil-rock” interface with a “water-rock” interface. This process is closely related to the under-oil–water wettability of the rock surface. In this study, alkoxysilane modification was used to regulate rock surfaces, achieving three wetting states: under-oil hydrophilic (under-oil–water contact angle of 34.9°), under-oil neutral (under-oil–water contact angle of 92.4°), and under-oil hydrophobic (under-oil–water contact angle of 129.2°). The simulated water flooding and spontaneous imbibition experiments demonstrate that enhancing the under-oil hydrophilicity of rock significantly improves both water flooding oil recovery and imbibition recovery. Water flooding results show that, compared to untreated natural cores, the oil recovery of under-oil hydrophilic cores increased by 10.5%, with a corresponding reduction in displacement pressure of 1.4 MPa. In contrast, under-oil hydrophobic cores exhibited a 13.7% decrease in recovery and a 1.3 MPa increase in pressure. Spontaneous imbibition tests revealed that under-oil hydrophilic cores achieved an imbibition recovery of 34.02%, whereas under-oil hydrophobic cores showed almost no effective oil production via imbibition. It also confirms that it is not the overall water or oil wettability (in air) of the rock surface but the under-oil–water wettability that determines the efficiency of water flooding. These findings can provide insightful guidance for searching for more efficient water flooding methods.
✓ 已验证
DOI
PubMed
高影响因子