Nanoscale
·
2026
·
IF 5.1
Limeili Tian,Miaomiao Yang,Jing Wang,Shuai Yang,Chunxu Han,Yangyang Huang,Qingqiang Meng,Aiping Wu
Photocatalytic degradation is an eco-friendly method for decomposing tetracycline hydrochloride (TC), yet it faces challenges such as slow photogenerated carrier transfer, poor separation efficiency, and limited active sites. Semiconductor composites offer a promising solution to enhance catalytic efficiency. In this context, a novel 0D/2D BiOCl 0.7 I 0.3 /Bi 2 MoO 6 (BOCI-BMO) direct Z-scheme photocatalyst was synthesized via a solvothermal method, featuring 0D BiOCl 0.7 I 0.3 quantum dots anchored on 2D Bi 2 MoO 6 nanosheet. The composite photocatalyst with an optimal BOCI to BMO mass ratio of 7:3 (50 mg), achieved over 94% removal of TC (10 ppm) in 40 minutes, demonstrating excellent cyclic stability and broad applicability. Both theoretical calculations and experimental results confirm that the photogenerated carrier transport between semiconductors follows a Z-scheme mechanism, significantly enhancing carrier separation efficiency while preserving strong redox capabilities. Moreover, the unique 0D and 2D structures provide a large specific surface area, offering abundant active sites and reducing carrier transport distance, thereby boosting photocatalytic performance. This study provides theoretical and experimental insights for designing and synthesizing novel visible light-responsive photocatalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·
IF 7.2
Mengnan Qu,Siyu Li,Mengge Cao,Ziqi Liu,Kun Xue,Jinmei He
In this article, a kind of multifunctional composite with magnetic actuation and photothermal conversion functions for oils and MPs adsorption in water was successfully fabricated through dip-coating method. Through a series of steps of grafting PDA, CuCo-LDHs, Fe 3 O 4 , and PDMS on melamine foam (MF) structure, a multifunctional composite sponge was designed, and was labeled as PDMS/Fe 3 O 4 /CuCo-LDHs/PDA@MF (PFCA). The PFCA shows remarkable photothermal conversion performance, the maximum surface temperature can attain 141.1 ℃ under simulated sunlight with intensity of 2.0 kW/m 2 . Meanwhile, the PFCA exhibits remarkable oil–water separation performance, the oil removal efficiencies of various oils are all higher than 99%. Besides, the PFCA presents good adsorption performance for MPs, the maximum removal efficiencies of MPs removal based on PE, PP and PS are 98.3%, 98.1% and 98.7%, respectively. Finally, the adsorption behavior of PFCA for MPs were studied, the MPs adsorption mechanism of PFCA was explored and p–π, π–π interaction, electrostatic force, hydrogen bonding, superhydrophobic effect and their synergistic effect were analyzed.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 11.3
Junyi Feng,Shiyu Wang,Jiwei Zhang,Mengyi Tang,Xiaodan Zhang,Xuesong Feng,Kaifa Du,Wei Li,Huayi Yin,Bowen Deng,Dihua Wang
The efficient immobilization of radionuclides such as Cs, Sr, Ba, and Ce remains a critical challenge in the safe treatment of radioactive waste salts. Here we report a synergistic lattice incorporation and spatial confinement strategy that enables one-step immobilization of multiple radionuclides within a sodalite framework derived from topotactic transformation of 4 A zeolite. Mechanical blending followed by solid-state sintering at 850℃ for 2 h produces a dense sodalite solidified matrix exhibiting exceptional thermal stability, radiation resistance, acid-alkali tolerance and mechanical integrity. The normalized leaching rates of Cs, Sr, Ba, and Ce were all below 5 × 10 −5 g/(cm 2 ·d) after 28 days. Multiscale characterization combined with density functional theory (DFT) reveals that chemical adsorption, ion exchange, lattice incorporation, and covalent coordination collectively stabilize radionuclides through coupled spatial confinement and lattice immobilization. A prospective life cycle assessment (LCA) confirms that this sodalite operates with markedly reduced carbon emissions and energy demand compared to conventional vitrification and ceramic process. These findings provide a promising low-energy, high-safety pathway for the immobilization and disposal of irradiated nuclear fuels.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.7
Fei Xu,Yingqi Gao,Xiaoxiao Zhou,Jing Cui,Ruozheng Wei,Tao Peng
The treatment of pancreatic cancer has long been a global challenge. Strategies based on mitochondrial Ca 2+ overload-related ferroptosis have garnered significant attention. However, the various limitations of current Ca 2+ generators make it difficult to maintain an effective concentration of Ca 2+ overload. In this study, we developed a nanocomposite material, CaO 2 @Fe( SS )-MOF@Ce6@PAA (CFMCP), by encapsulating CaO 2 nanoparticles (NPs) and the photosensitizer Chlorin e6 (Ce6) within a metal-organic framework (MOF) and further modifying it with polyacrylic acid (PAA). This nanocomposite effectively depletes glutathione (GSH) in tumor tissues, thereby enhancing the efficacy of photodynamic therapy (PDT) and chemodynamic therapy (CDT). Upon co-incubation of CFMCP NPs with SW1990 pancreatic cancer cells, we observed efficient cellular uptake of the nanomaterials. Under the influence of CFMCP NPs, cellular GSH and glutathione peroxidase 4 (GPX4) levels decreased, exacerbating oxidative stress and lipid peroxidation, increasing Fe 2+ content, and aggravating mitochondrial damage. Using the mitochondrial Ca 2+ uptake inhibitor Ruthenium red, we further confirmed that Ca 2+ overload is a critical mechanism by which CFMCP NPs induce ferroptosis in SW1990 cells. In vivo studies demonstrated that CFMCP NPs exhibit excellent biocompatibility, significantly inhibit tumor growth, and exert direct cytotoxic effects. In summary, the development of this novel composite nanomaterial, which induces ferroptosis through mitochondrial Ca 2+ overload, provides a valuable reference for synergistic and highly effective tumor therapy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.3
Yuanlu Xu,Jiaying Yan,Maolong Qiao,Shuan Ye,Yunda Wu,Qingquan Tang,Chengxiang Zhu,Kehan Jiang,Ruzhong Zuo,Chang Wu,Kang Du,Shengxiang Wang
Y 4 Al 2 O 9 ceramics were synthesized via the solid-state reaction method across a range of sintering temperatures. The phase-pure composition was identified as monoclinic (space group P 2 1 /c), characterized by a structural framework of interconnected [YO₆] and [YO₇] polyhedral chains. XRD analysis and Rietveld refinement confirmed the formation of single-phase Y 4 Al 2 O 9 within the sintering temperature of 1450 °C to 1650 °C. At the optimal sintering temperature of 1625 °C, the Y 4 Al 2 O 9 ceramics exhibited a highly dense and uniform microstructure, correlating with its great microwave dielectric performance. Far-infrared spectroscopy analysis further revealed intrinsically low dielectric loss and a low relative permittivity for Y 4 Al 2 O 9 ceramics. The Y 4 Al 2 O 9 ceramic sintered at 1625 °C demonstrated the highest relative density (99.89 %) and optimal microwave dielectric properties: ε r = 12.09, Q × f = 34,419 GHz, and τ f = 43.6 ppm/°C, making it a promising candidate for high-temperature co-fired ceramic (HTCC) applications. To validate its practical utility, a C-band dielectric patch antenna was designed and fabricated using the high-performance Y 4 Al 2 O 9 ceramic as the dielectric substrate. The antenna achieved a gain of 4.31 dBi and an efficiency of 80.12 % at the center frequency of 4.52 GHz, highlighting its suitability for emerging 5 G communication systems.
✓ 已验证
DOI
高影响因子
JOURNAL OF FOOD COMPOSITION AND ANALYSIS
·
2026
·
IF 4.6
Feiran Xu,Tong Ji,Yu Wang,Guosheng Xu,Xingguang Chen,Zhaoming Wang,Bao Zhang,Jiansheng Zhao,Baocai Xu
γ-Glutamyl dipeptides (γ-GGDPs) have been implicated be generated by enzymatic action on γ‑glutamyl groups, modulate kokumi sensation of fermented foods via activating calcium-sensing receptors (CaSR). However, their variation and potential formation mechanism in Jinhua ham remain unclear. 10 γ-GGDPs (γ-EA, γ-ED, γ-EE, γ-EL, γ-EM, γ-EG, γ-EF, γ-EY, γ-EI, γ-EW) in Jinhua ham were quantified by UHPLC-Q-TOF-MS and accumulating significantly during processing ( P < 0.05), with final contents ranging from 0.78 ± 0.01 μg/g (γ-EW) to 24.75 ± 0.33 μg/g (γ-EA). Sensory evaluation confirmed these γ-GGDPs enhanced the kokumi, saltiness, and umami of Jinhua ham during the post-ripening periods. Mechanistic investigation indicated that γ-glutamyl transpeptidase (GGT) transfer and hydrolytic activities increased progressively to 9.11 ± 0.17 U/mg and 12.19 ± 0.40 U/mg, respectively, which corroborated GGT's role in driving γ-GGDPs formation by catalyzing the transfer of γ-glutamyl groups to free amino acids (FAAs) generated by endogenous enzymes in Jinhua ham. Further validation via a ternary reaction system (comprising FAAs, γ-glutamyl donors, and GGT extracted from Jinhua ham) confirmed this GGT-catalyzed transfer reaction for γ-GGDPs biosynthesis. This study provides a theoretical foundation for the potential formation mechanisms of γ-GGDPs in Jinhua ham and regulation of Kokumi sensation in fermented foods.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENT INTERNATIONAL
·
2026
·
IF 9.7
Ren Kong,Meng Li,Zihan Zhang,Qian Sun,Chunsheng Liu
Rice consumption constitutes a primary pathway for non-occupational pesticide exposure globally. However, systematic characterizations linking multi-regional residue profiles with mechanism-informed toxicity prioritization remain insufficient. Here, we applied an integrated “residue–exposure–mechanism” framework to analyze 98 pesticides across 306 rice samples, comprising 234 from China and 72 from major international producers. Forty-four pesticides were detected across rice samples, including 32 insecticides, 9 fungicides, and 3 herbicides. All samples contained detectable residues, with total concentrations ranging from 0.01 to 242.28 μg/kg dry weight. Insecticides dominated pesticide profiles, while the fungicide carbendazim was nearly ubiquitous. Pronounced spatial heterogeneity in pesticide contamination was observed across surveyed countries, as Pakistan exhibited the highest overall pesticide burden while Russia displayed the lowest. The residues within China followed a “east/south higher, west/north lower” gradient. The maximum total hazard quotient occurred in sample from Myanmar, followed by Pakistan and India, and the dietary risks were primarily driven by lambda-cyhalothrin, profenofos and chlorpyrifos. By integrating exposure metrics with ToxCast in vitro bioactivity and ADME evidence, we identified 20 priority pesticides exhibiting multi-organ bioactivity signatures. Overall, this study provides a comprehensive multi-region examination of pesticide residues in rice and offers a mechanism-informed screening strategy to guide pollutant prioritization and risk management.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Soft Matter
·
2026
·
IF 2.8
Tianyu Wang,Chenxi Huyan,Qiuzhen Chen,Xiang Han,Fahu Yang,Zibi Wang,Changxiang Guo,Dong Liu,Fei Chen
High-performance elastomers always suffer from the trade-off between the ability of self-healing and mechanical stiffness. Here we report a hierarchical, synergistic hydrogen-bonding design that overcomes this trade-off. By integrating quadruple hydrogen bonds with moderately dynamic hydrogen-bond clusters within the hard domains of polyurea, we create a dual-dynamic, decoupled phase architecture that simultaneously imparts rigidity and enables reversible molecular reconfiguration. This interplay of strong and dynamic interactions generates robust hard domains that reinforce mechanical strength while preserving rapid, thermally activated self-healing. The resulting polyurea exhibits near-complete recovery of mechanical performance (≈100% at 80 °C after 8 h) together with a high Young's modulus of 24.2 MPa. This work demonstrates a rational strategy to reconcile the conflicting demands of self-healing and stiffness in polymeric materials through a hierarchical synergistic hydrogen-bonding system.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 9
Xiaohui Yi,Shao-Lu Li,Jun Xiao,Niamat Ullah,Hongfen Zuo,Yunxia Hu,Genghao Gong
Efficient separation Mg 2+ and Li + is crucial for lithium extraction from salt-lake brines because the two cations have very similar chemical and physical properties. In this work, we synthesized a novel bis-pyridinium amino monomer, 1,1'-(ethane-1,2-diyl)bis(3-aminopyridin-1-ium) (BAPE), and grafted it onto the PEI-TMC membrane surface. By regulating the BAPE grafting concentration, both the surface charge and effective pore size were systematically modulated. The optimized BAPE-grafted membranes exhibited a strongly positive zeta potential (19.9 mV at pH 7) and a water permeance of 24.5 LMH/bar, 4.4 times that of the pristine membrane, while maintaining a high MgCl 2 rejection of ∼98.6 % using a 1000 ppm MgCl 2 feed solution. Notably, a single filtration stage reduced the Mg 2+ /Li + ratio from 20 in the feed to 0.48 in the permeate, corresponding to a high selectivity (S Mg 2+ /Li + ) of 41.6 (2000 ppm, Mg 2+ /Li + ratio of 20). The modified membranes also demonstrated excellent long-term stability over 72 h. These results underscore the value of rational molecular design, introducing pyridinium functionality by surface grafting, as a promising route to high-performance nanofiltration membranes for brine with high Mg 2+ /Li + ratios.
✓ 已验证
产品关联
DOI
高影响因子
REACTIVE & FUNCTIONAL POLYMERS
·
2026
·
IF 5.1
Xiyuan Guo,Yuanfeng Pan,Yuanjian Xie,Pingxiong Cai
Pesticides are essential for agricultural production; however, their improper application can result in ecological damage and potential threats to human health. Therefore, the development of pesticide-controlled-release systems is crucial for the sustainable progress of agriculture and society. This work presents a novel strategy for fabricating a polyelectrolyte hydrogel bead-based pesticide-controlled-release system. The process involves blending a sodium alginate/carboxymethyl chitosan (SA/CMCS) solution with cystine dihydrochloride (CYS), followed by introducing the mixture into a citric acid (CA) solution. The abundant protonated amino groups (-NH 3+ ) and carboxylate anions (-COO-) within the system facilitate the formation of CMCS/SA-CYS/CA composite hydrogel beads (CHGB), subsequently loaded with thiamethoxam (TMX) to create TMX-loaded CHGB (TCHGB) for investigations into drug loading and responsive release. The CHGB exhibits remarkable swelling properties (up to 4200%), along with pH and redox sensitivity. And the release of TMX from TCHGB displays favorable responsiveness to pH and redox stimuli. Under alkaline conditions (pH 9.0) and reductive surroundings (containing glutathione), the cumulative release ratio of TMX surpasses 95%. Furthermore, it has been demonstrated that the release kinetics of TMX comply with Fickian diffusion described by the Korsmeyer-Peppas model. The discoveries of this study hold considerable research and practical value in the domain of controlled-release agricultural chemicals.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2026
·
IF 4.7
Hanli Hu,Congqing Yang,Jun Guo,Mingxi Pan,Yina Li,Hui Huang
Copper (Cu) powder, valued for its exceptional conductivity and low cost. However, their applications suffer from severe oxidation. Existing organic modification strategies overlook the intrinsic surface energy anisotropy of Cu, inadequately suppressing initial oxidation at high-active sites and consequently poor oxidation resistance. To address this limitation, this work proposes a priority targeted passivation of high-activity facets strategy. This approach recognizes that high-activity sites on Cu surfaces serve as primary triggers for oxidation reactions, by preferentially blocking O 2 dissociation at these active sites, oxidation can be substantially suppressed. Three environmentally friendly modifiers — stearic acid (SA), oleic acid (OA), and 1-dodecanethiol (1-D) were screened for surface modification. Systematically investigated how their facet-selective adsorption regulates oxidation pathways in Cu particles. While OA preferentially adsorb onto high-activity Cu (220) facets, effectively inhibiting O 2 dissociation at these critical sites and suppressing oxidation at its source. OA-modified Cu powder preserved 63.40 % metallic Cu after 180°C/8h sintering and remained unoxidized after 180 days in air exposure, demonstrating exceptional antioxidation performance. This study establishes that prioritized passivation of highly energy facets is essential for enhancing the oxidation resistance of Cu powders.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2026
·
IF 5.1
Yihui Lan,Guirong Wu,Jin Tang,Zekai Huang,Yunlong Zhao,Jiangnan Zhao,Chenyang Xue,Libo Gao
Flexible pressure sensors that mimic human skin are attractive for electronic skin, soft robotics, and healthcare, but it remains difficult to combine ultrahigh sensitivity, wide range, and long-term stability in one device. Here, we present an ultra-sensitive iontronic pressure sensor (USIPS) based on a fingerprint-inspired spiral interpolating electrode, a laserprocessed spacer, and a thermoplastic polyurethane (TPU)/graphene/multi-walled carbon nanotubes (MWCNTs)/ionicliquid composite layer microstructured into cylindrical protrusions by femtosecond-laser engraving. This architecture amplifies contact mechanics and electric-double-layer modulation, delivering ultrahigh sensitivities of ~1.92 × 10⁵ kPa⁻¹ (0-110 kPa), ~6.58 × 10⁴ kPa⁻¹ (110-300 kPa), and ~1.91 × 10⁴ kPa⁻¹ (300-900 kPa), together with a wide detection range (from ~577 Pa to 900 kPa), fast response (~20 ms), and excellent stability under prolonged high-pressure loading. Coupled with a tailored signal-processing and machine-learning pipeline, the USIPS enables quantitative hardness/softness perception and accurate discrimination of representative materials, while also supporting pulse monitoring, robotic grasping, and plantar gait analysis. These results demonstrate a unified iontronic-AI platform for wide-range, high-fidelity tactile sensing and intelligent perception.
✓ 已验证
产品关联
DOI
PubMed
高影响因子