NATURE
·
2026
·
IF 48.5
Zhang Kun,Liu Yifang,Gao Ying,Zhang Zhe,Wang Haoyu,Li Wanwu,Fan Xiaoyan,Ding Jiayu,Guan Ziqi,Kawaguchi Shogo,Du Zhaoxu,Zhang Jiaqing,Su Lei,Li Yiming,Jiang Runjian,Li Yifan,Jia Yating,Wang Yanxu,Lin Jianchao,Zhu Jinlong,Tong Peng,Qian Suxin,Li Kuo,Zhang Zhidong,Li Bing
Refrigeration is indispensable to modern society 1 , yet the dominant vapour-compression systems rely on environmentally harmful fluorocarbon refrigerants with high global warming potential 2 , 3 , 4 . Solid-state caloric refrigeration offers a low-carbon alternative 5 , 6 , 7 , but its practical deployment has been hindered by limited cooling capacity and the inefficient indirect heat transfer that requires secondary fluids. Here we report an extreme barocaloric effect in NH 4 SCN aqueous solutions enabled by pressure-tuned dissolution and precipitation. This mechanism delivers an exceptionally large cooling capacity and markedly enhanced cooling efficiency. We obtain an in situ temperature drop of 26.8 K in the solution at room temperature, surpassing all known caloric materials. A Carnot-like cycle is designed to deliver 67 J g −1 cooling capacity per cycle with a second-law efficiency of 77%, benefiting from the extremely large temperature drops and direct heat transfer due to the self-circulating aqueous solution. Beyond the phase-transition scenario, this dissolution-based approach that combines the merits of current leading technologies emerges as a promising sustainable refrigeration solution.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 5.6
Jianguo Zhang,Chaochao Cao,Junke Cui,Chaoze Liu,Shaobo Yang,Zheng Zhou,Song Yan,Yanming Xue,Yongxin Qi,Chengchun Tang
Spherical boron nitride (BN) agglomerates with excellent liquidity and isotropy have great promise for enhancing their composite performances. However, the deficiency of poor structural strength and high-temperature fabrication approach are the current factors that limit this. Here, we report BN-LMO composite microspheres with isotropic properties and an average diameter of 69.04 μm achieved via a combined spray drying and low-temperature sintering (700 °C) approach, using lithium molybdate (Li 2 MoO 4 , LMO) as a low-melting-point binder. This route promotes liquid-phase assisted interfacial bonding between BN sheets, allowing the formation of structurally stable and mechanically robust composite microspheres while avoiding conventional high-temperature sintering. The resulting BN-LMO microspheres were uniformly dispersed in a PMMA matrix at 30 wt% loading with thermal conductivity of 0.9 W/(m·K) and glass transition temperature of 102.5 °C, which have increased by 373.7 % and 4.0 °C compared with pure PMMA, respectively. Besides, the composites also exhibit high compressive fracture strength of 123.3 MPa, and low dielectric loss of <0.041. Therefore, this exploration simultaneously achieves structural reinforcement and large-scale preparation of spherical BN agglomerates, offering potential opportunities for their wide applications in isotropic thermal management composites.
✓ 已验证
产品关联
DOI
高影响因子
EUROPEAN POLYMER JOURNAL
·
2026
·
IF 6.3
Xiaoyun Qing,Keyan Wang,Jiajun Qiu,Mengting Hu,Qinpei Wang,Liang Li,Zhen Fang,Yangbing Wen
In this study, a self-healing lignin-based polyacrylamide/polyvinyl alcohol (SL-cPAM/PVA) hydrogel featuring excellent high temperature and salt resistance was successfully synthesized via a two-step method. Sodium lignosulfonate (S-Lignin) was first incorporated into a chemically crosslinked polyacrylamide (cPAM) network, followed by the formation of dynamic boronate ester linkages among polyvinyl alcohol (PVA), catechol groups, and borax to construct a dual crosslinked structure. The rheological, thermal, and mechanical properties of the hydrogel were comprehensively characterized. The results indicate that the introduction of S-Lignin improved the initial decomposition temperature from 150 °C to 178 °C, and enabled the hydrogel to achieve self-healing behavior at 130 °C, supported by reversible borate ester bonds, hydrogen bonding, and ionic interactions. The hydrogel maintained structural integrity in high-salinity environments (up to 21 × 10 4 mg/L) and demonstrated remarkable recovery in mechanical strength and microstructure after damage. Even after 30 days of thermal aging at 130 °C, brine-healed hydrogel remained intact without signs of hydrolysis. These findings indicate the excellent potential of SL-cPAM/PVA hydrogel as a water-plugging material in high-temperature, high-salinity oilfield environments, providing a sustainable and functional approach for enhanced oil recovery.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 9
Yuxuan Chen,Xiaoming Xu,Zhiwei Wang,Sunxinyi Wang,Guoyan Hua,Fuqiang Liu
The eco-friendly and cost-effective regulation of interface polymerization (IP) reaction is an effective strategy to enhance the energy efficiency of nanofiltration (NF). In this work, a novel polyamide (PA) NF membrane was prepared by introducing glycerol-doped sugarcane cellulose nanofibers as a biomass composite interlayer. The optimized interlayer could modulate the water-organic interfacial tension and regulate piperazine (PIP) diffusion, thereby enabling a more controlled IP reaction. The optimized membrane (TFC-8) featured a more homogeneous and integrity PA separation layer with the thickness of only 25 nm. Compared to the control membrane, TFC-8 exhibited a lower zeta potential, reduced pore size, a narrower pore size distribution, and a high pure water permeance of 45.78 LMH/bar. Additionally, TFC-8 achieved a high monovalent/divalent anion selectivity of 160.38 in the treatment of dyeing wastewater and showed great potential in the removal of organic micropollutants. Molecular dynamics simulations and interfacial tension confirmed that the composite interlayer greatly improved the tension at the water-organic interface, promoting a more uniform trans -interfacial mass transfer process of PIP. Overall, this work represents a novel eco-friendly modification method for the preparation of homogeneous and structurally intact PA NF membranes for efficient separation of inorganic salts from wastewater.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.9
Jinling Gao,Wei Zhan,Yuning Huang,Wei Gao,Hong Yin
Boron nitride (BN) is a promising nonmetallic oxygen evolution reaction (OER) support due to its exceptional stability in oxidative environments. However, the site requirements and reaction mechanism of BN-based catalysis are still in vigorous debate. Herein, we construct a hybrid catalyst of cobalt clusters anchored on carbon-doped boron nitride (Co-C/BN). Unlike complex interfacial engineering strategies, our simple carbon-doping method creates abundant anchoring sites within inert h -BN, providing a versatile support platform. The induced strong electronic metal-support interaction (EMSI) effectively modulates the electronic structure, resulting in enhanced OER activity with an overpotential of 410 mV at 10 mA cm −2 and a Tafel slope of 111 mV dec −1 , alongside improved stability. Through combined experimental and theoretical analyses, we find that the carbon-doped BN support facilitates charge redistribution, forming an interfacial dipole and lowering the Co d-band center. This electronic modulation optimizes the adsorption free energy of oxygenated intermediates, thus accelerating reaction kinetics. Site-specific density functional theory calculations reveal that Site 2, a moderately electron-enriched Co atom on the surface, is the most active site, emphasizing the importance of the local coordination environment. This work underscores the crucial role of EMSI in tailoring the electronic structure of metal clusters for advanced electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 9.8
Yating Shang,Xinyue Jiang,Yanxia Zuo,Yuqun Xie
This study elucidates the microstructural evolution of ethanol clusters and their regulatory role in flavor ester solubility during the aging of Soy sauce flavor Baijiu. Using integrated fluorescence and Raman spectroscopy, we show that Liquid-Liquid Phase Separation (LLPS) transforms ethanol clusters from hydrophilic to hydrophobic microdomains. Methodologically, we innovatively combined alcohol dehydrogenase (ADH) activity assay with Nile Red fluorescence probing to distinguish ethanol molecular states. Mass spectrometry further reveals a Non-Monotonic dissolution pattern for four key long-chain fatty acid ethyl esters: initial solubility increase through hydrophobic microdomains is later reversed by steric hindrance due to excessive cluster densification during extended aging. In samples aged over 30 years, pronounced ethanol cluster aggregation triggers flavor precipitation, evidenced by decreased free ethanol and solid deposit formation. These findings uncover the microstructural mechanism linking phase separation to flavor stability, offering a theoretical basis for improving Baijiu colloidal properties and sensory quality.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
npj Flexible Electronics
·
2026
·
IF 15.5
Lin Feifei,Ni Hao,Zhao Weiwei,Liu Leilei,Zhang Yijie,Huang Zijing,Wang Wenjin,Wang Qixiang,Wang Tushun,Bai Yan,Ding Ning,Liu Shujuan,Huang Wei,Zhao Qiang
Flexible millimeter-wave (mmWave) antennas hold great promise for conformal integration across diverse devices and high-speed, large-channel capacity in 5G/6G wireless communications. Spoof surface plasmon polaritons (SSPPs) structure with periodic grooves is well-suitable for designing miniaturized, flexible and ultra-wideband planar mmWave antennas. However, achieving high-precision fabrication of SSPP configurations with optimal micrometer-scale filling factors using flexible conductive materials remains highly challenging. Herein, we report the high-precision all-Ti 3 C 2 -printed flexible ultra-wideband mmWave endfire antennas based on SSPPs for wireless communication. The SSPPs antenna exhibits a wide operating bandwidth of 25–49 GHz, which stems from the reactance properties of the ordered multilayer structure of Ti 3 C 2 . The S- parameter and gain can be well maintained even after cyclic bending, owing to the robust adhesion between the polydopamine-modified substrate and the Ti 3 C 2 film. This work pioneers the demo instance of flexible Ti 3 C 2 antenna for high-speed (446.06 Mbps), large-capacity, and low-latency mmWave wireless communication.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2026
·
IF 7.9
Minyue Yan,Xun Zhu,Dingding Ye,Xuefeng He,Yuan Zhou,Yang Yang,Qiang Liao
Air-breathing microfluidic fuel cells (AMFCs) are considered promising micro power sources due to their competitive cell performance, easy integration, and wide range of applications. However, the gas-liquid two-phase flow mechanism in AMFCs remains unclear. In this work, we propose a novel AMFC that enables high-resolution in-situ observation of the dynamic behavior of gas-liquid two-phase flow within the microchannel. A comprehensive analysis is conducted using mechanical models to investigate the cell performance and two-phase flow behaviors under various conditions, including wettability, flow rates, slant angles and the catalyst loading. Additionally, the influence mechanism of anodic pore size on bubble escape behavior is analyzed. We optimize cell power generation, discharge stability and two-phase flow under conditions of a hydrophilic channel, high flow rate and a 90° slant angle. For the porous anode, increasing the catalyst loading reduces the pore size of the anode surface, which is beneficial to promoting the detachment of small bubbles, thereby enhancing fuel transport, power generation and cell stability. This work provides the new insight into understanding the effects of gas-liquid two-phase flow on cell performance to improve the stability of power generation.
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2026
·
IF 2.6
lidi Gao,Jiawen Yu,Dongsheng Zhao,Xinyu Liang,Jun Wang,Fuquan Zhao,Ming Zhao,Hongtao Chu,Shili Qin
In this work, a novel Ti-based MOF (NH2-MIL-125) bonded open-tubular (OT) column was firstly prepared via one-step in-situ growth method for capillary electrochromatography (CEC). The stationary phase was characterized by Fourier transform-infrared spectroscopy, scanning electron microscopy, X-ray diffraction spectroscopy, and nitrogen adsorption-desorption measurements. The results showed that the stationary phase exhibited a large specific surface area (1247.57 m²/g) with microporous and mesoporous structure and no obvious changes in the morphology/size inside and outside the column. Baseline separation of three β-adrenergic receptor blockers (Prop, Sot, and Lab), three β-adrenergic receptor agonists, and four sulfonamide antibiotics were obtained under the optimized CEC conditions with the shortest analysis time of 2.52 min and a maximum resolution of 11.52. The separation mechanisms were mainly attributed to polarity and electrophoretic mobility of the analytes, as well as π-π interactions and hydrogen bonding interaction between the stationary phase and the analytes. A quantitative detection method of three β-adrenergic receptor blockers in pork samples was established using the NH2-MIL-125 bonded OT column. Good linearity (R² > 0.999) was obtained over the concentration range of 0.01-1.00 mg/mL with limits of detection of 0.0044-0.0084 mg/mL and recoveries of 90.27-106.74%. Thus, the developed method was simple, rapid and high efficiency, and could be applied for the simultaneous separation and detection of the three β-adrenergic receptor blockers in real samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.2
Jinxue Wang,Songli Yu,Fei Xu,Wei Cui,Binwu Chen,Yanzhen Yin,Xingtang Liang
A castor oil-based polyether polyol (COP) with molecular weight comparable to that of a petroleum-based polyether polyol (PPG) was prepared via the oxypropylation of castor oil and propylene oxide. Such COP was utilized to fabricate flexible polyurethane foams (FPUs). A comparative study was conducted on foams derived entirely from PPG (FPU-0), with 50 % COP substitution (FPU-0.5), and entirely from COP (FPU-1.0). Results indicated that the introduction of COP significantly enhanced hydrogen bonding interactions between the ester groups in the soft segments and the imino groups in the hard segments, as confirmed by FT-IR, XRD and DFT calculations. These stronger hydrogen bonds promoted the physical cross-links between the soft segments and the hard segments. This led to a remarkable improvement in tensile strength (from 99.5 kPa to 124.2 kPa) and energy dissipation under cyclic compression (increasing from 2.2 kJ/m³ to 5.2 kJ/m³ at the 4th cycle) while maintaining a high fracture elongation (∼140 %). Owing to its high damping capacity and sustainable, bio-based composition, the COP-based FPU showed great potential for impact-absorbing applications such as protective packaging, automotive seating cushions, and sports equipment midsoles. This work elucidated the crucial role of ester groups in enhancing intermolecular interactions and improving the properties of FPU, providing a practical guidance for developing high-performance bio-based flexible polyurethane foams.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·Vol. 17
·期 1
·767
·
IF 15.7
Wang Zhenyu,Yang Yingguo,Luo Guizhong,Xu Wenwu,Liu Chengyu,Yang Tianqi,Ji Wenyu,Zhang Fujun,Lu Min,Zhang Yu,Wu Zhennan,Bai Xue
Metal nanoclusters, as unique metallic molecules comprising a few to hundreds of metal atoms and stabilized by organic monolayer ligands, have recently emerged as a novel class of chromophores and hold great promise for flexible light-emitting diodes. However, the fabrication of flexible metal nanoclusters-based light-emitting diodes is still hindered by low photoluminescence quantum yields, suboptimal solution processability, and consequently compromised emitter-film quality with random dipole orientations. This work addresses these limitations through strategic molecular engineering by employing 1, 3-di(9H-carbazol-9-yl)benzene as a π-conjugated mediator. This approach enables supramolecular assembly to achieve π-π coupling-mediated horizontal dipole alignment in nanocluster solid films, allowing an external quantum efficiency of up to 26.4% in flexible light-emitting diodes with a maximum brightness of 41,365 cd m −2 , and retaining more than 94% of initial efficiency after 2000 bending cycles at 3 mm curvature radius.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Yan Wang,Jingyu Lu,Shuang Guo,Shuai Wang,Jingjing Pan,Yinghua Wu,Haifang Hu,Chuanjie Fang,Liping Zhu
The removal of refractory organic pollutants from water sources poses a critical challenge for environmental protection. Catalytic membranes that integrate separation and degradation functionalities have emerged as a promising strategy. However, their practical implementation has been hampered by inadequate catalyst stability and complex fabrication processes. In this study, we report a facile strategy to fabricate a robust Ag-based catalytic membrane (Ag-PDA-M 0 ) via the in situ growth of Ag nanoparticles on a polydopamine (PDA)-modified nylon substrate. The PDA interlayer provides abundant anchoring sites for Ag nanoparticles, enabling the formation of a dense and uniform catalytic layer throughout the membrane matrix. Under gravity-driven filtration conditions, the membrane demonstrated exceptional performance with 99% removal efficiency for methylene blue without requiring additional catalyst recovery steps. Notably, it maintained 92% of its initial catalytic activity after eight consecutive operation cycles, demonstrating remarkable stability under continuous-flow conditions. Comprehensive characterization confirmed that the enhanced performance originated from the synergistic combination of high catalyst loading, optimized mass transfer, and strong metal-support interaction provided by the PDA modification. This work presents a practical and scalable approach for designing high-performance catalytic membranes, offering new insights into the development of energy-efficient water treatment technologies for sustainable pollutant removal.
✓ 已验证
产品关联
DOI
高影响因子