ENERGY & FUELS
·
2026
·Vol. 40
·期 31
·17236-17244
·
IF 6
Li Xuguang,Sheng Zhiyuan,Liu Zhiqiang,Cai Zhuoyi,Sun Shuo,Zhao Xiangyu
Although all-solid-state lithium
batteries (ASSBs) demonstrate
immense potential for practical applications due to their exceptional
safety and high energy density, their large-scale commercialization
remains hindered by sluggish Li-ion migration kinetics. This bottleneck
is primarily rooted in the inherently deficient ionic conductivity
of conventional high-capacity cathodes, which, combined with poor
interfacial compatibility between the cathode and solid electrolyte
(SE), typically triggers a marked escalation in charge-transfer impedance
at the cathode/SE interface during the cycles, eventually leading
to rapid electrochemical decay. Here, we report NbOCl 3 as
a high-capacity cathode material involving a 3-electron redox process.
Owing to the dynamic enhancement of ionic conductivity (>2 ×
10 –5 S cm –1 ) during the discharge
process and good interfacial compatibility between the oxychloride
cathodes and the chloride SE, the NbOCl 3 electrode exhibits
fast Li-ion transport kinetics at the cathode/SE interface. Furthermore,
owing to the high binding energy of Nb–O bonds, NbOCl 3 exhibits remarkable ambient stability, preserving its crystalline
tetragonal framework for over 20 days at 60% relative humidity─a
stark contrast to the near-instantaneous decomposition of niobium
chloride. These synergistic effects enable NbOCl 3 to deliver
a robust electrochemical performance, characterized by 55% capacity
retention over 1000 cycles at 1.0 C and high-rate capability. Our
findings highlight the potential of NbOCl 3 for practical,
long-life ASSBs and provide a viable strategy for designing high-performance
electrode materials.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2026
·Vol. 20
·期 32
·22716-22728
·
IF 17.3
Wu Yunshuo,Wang Haiqiang,Wu Zhongbiao
Valorization
of nitrous oxide (N 2 O), a potent greenhouse
gas, through cooperative reforming with light alkanes offers a promising
route toward carbon-negative hydrogen production. Here, we report
a Ru 1+n /ZnO catalyst that integrates isolated ruthenium
single atoms (Ru 1 ) with subnanometre ruthenium nanoparticles
(Ru n ), enabling cascade N 2 O valorization coupled
with propane dry reforming. The catalyst reduces noble-metal cost
by ∼70% compared with Ir-based benchmarks while delivering
markedly enhanced hydrogen production (145.1 mol H 2 kg cat –1 h –1 ) together with
stable operation for at least 72 h. Mechanistic studies reveal that
densely anchored Ru 1 sites in close proximity to Ru n electronically modulate the nanoparticles toward a more metallic
state, promoting hydrocarbon activation. Meanwhile, CH x * intermediates formed on Ru n are rapidly
consumed through reforming with O* species generated on satellite
Ru 1 via N 2 O activation, enabling an efficient
cascade reaction pathway that suppresses side reactions and enhances
hydrogen generation. This work demonstrates a cooperative single-atom–nanoparticle
catalytic strategy for greenhouse-gas valorization and efficient hydrogen
production, providing insights into the rational design of multifunctional
reforming catalysts.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2026
·Vol. 9
·期 30
·14427-14438
·
IF 5.8
Wang Dandan,Cui Yuandong,Wang Hongxiao,Li Xin,Ben Haoxi,Yang Xiaoli
Selective conversion of cellulose into C 2 polyols
under
aqueous-phase conditions remains challenging due to the difficulty
in coordinating hydrolysis, C–C bond scission, and hydrogenation
while suppressing nonproductive side reactions. Herein, we report
an ultrasmall entropy-stabilized multimetallic PdPtRuCuNi nanocatalyst
supported on defect-rich nanostructured WO x that enables precise interfacial regulation of the interfacial functional
balance. Under relatively mild hydrothermal conditions, the nanocatalyst
achieves complete cellulose conversion with a high ethylene glycol
selectivity of 65.7%, significantly outperforming the corresponding
single-metal nanocatalysts. Spectroscopic and kinetic analyses reveal
an exceptionally low apparent activation energy, which originates
from the surface-assisted hydrolysis pathway constructed by the nanoscale
metal-oxide contact interface with superior interfacial wettability
and abundant oxygen vacancies at the nanointerface. Mechanistic studies
demonstrate that the electronically coupled multimetallic sites provide
an ultrahigh hydrogenation rate that effectively traps reactive C 2 fragments before they undergo rearrangement to organic acids.
This work identifies rational modulation of nanoscale interfacial
functional balance as a universal design principle to boost target
product selectivity and carbon utilization efficiency for aqueous-phase
biomass catalytic conversion.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·Vol. 14
·期 28
·12821-12832
·
IF 7.6
Chen Yuhan,Xie Haiyang,Wu Yubo,Luo Jiangxue,Zhan Tianren,Zhang Yanjuan,Huang Zuqiang,Hu Huayu,Gan Tao
Developing highly efficient Fe-based single-atom catalysts (SACs) for the selective oxidation of C–H bonds to produce value-added aromatic ketones under mild conditions is still challenging. Herein, the construction of amphiphilic Fe SACs with electron-deficient Fe–S 2 O 2 structure supported on porous S-doped lignin-derived carbon (Fe 1 /SLC) was achieved using a ball milling combined with an impregnation method. Due to the synergistic interaction between electron-deficient Fe–S 2 O 2 sites and ethylbenzene (EB)–water microinterfacial effects, Fe 1 /SLC markedly enhanced the catalytic activity and acetophenone (AP) selectivity for the selective oxidation of EB to AP under 60 ° C for 12 h, obtaining an AP selectivity of 99.1% at 99.0% EB conversion and a high turnover frequency (TOF) of 2422.3 mmol EB g Fe –1 h –1 , which were much higher than those of the control catalyts (Fe 1 /LC and Fe NPs /SLC), surpassing most reported catalysts in similar reaction system. The electron-deficient Fe–S 2 O 2 sites were conducive to the cleavage of TBHP to generate 1 O 2 , • O 2 – , and • OH radicals, wherein • O 2 – was dominant, while 1 O 2 and • OH performed a secondary role. Meanwhile, the density functional theory calculations revealed that the amphiphilic property of Fe 1 /SLC induced by the C–SO x –C structure heightened the catalytic activity and AP selectivity, which originated from the unique interfacial hydrogen-bonding interactions and adsorption energy gradients. Furthermore, Fe 1 /SLC showed excellent recyclability, long-term storage stability, and satisfactory universality. This work provides a promising strategy to simultaneously improve the catalytic activity and aromatic ketones selectivity of the selective oxidation of C–H bonds.
✓ 已验证
产品关联
DOI
高影响因子
ACS Photonics
·
2026
·Vol. 13
·期 16
·4824-4834
·
IF 6
Qiu Yunping,Pan Yuzhu,Huang Qianqian,Zhang Yulian,Chen Jinbao,Liu Youwen,Wang Xin
MAPbBr 3 (MA = CH 3 NH 3 ) perovskite
single-crystal γ-ray detectors based on Schottky diodes typically
suffer from electrochemical reactions at the cathode under an applied
bias. A low-resistance contact could decrease the electrical field
near metal/MAPbBr 3 single crystals. However, it is difficult
to achieve highly conductive n-type/p-type layers made of MAPbBr 3 single crystals. In this work, we report that n-type and
p-type MAPbBr 3 can be achieved by incorporating heterovalent
dopants and adjusting the MABr:PbBr 2 molar ratio. Through
epitaxial growth, γ-ray PIN diodes consisting of n-type and
p-type layers are fabricated, which establish sufficient energy barriers.
The resulting γ-ray PIN diode (8.4 × 8.5 × 4.1 mm 3 ) exhibits a dark current of only 238 nA under a bias of −1000
V. Owing to the absence of a strong electric field near the cathode,
cathode stability is improved. The balanced charge transport property
is further confirmed by time-of-flight and Hecht analyses. The γ-ray
PIN diode achieves an energy resolution of 3.1% for 662 keV γ-ray
photons.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·Vol. 14
·期 31
·13972-13983
·
IF 7.6
Zhong Huoqing,Liang Hongwei,Liu Rongtao,Jia Jianbo,Cui Rongxue,Guan Ai,Zhou Hongyu,Yan Bing
The environmental persistence of petrochemical plastics demands not only biodegradable replacements but also fundamentally new material design strategies. Here, we report a biomineralization-inspired, oligomer-directed strategy that reprograms calcium phosphate growth at the prenucleation stage to fabricate a flexible, writable hybrid film composed of calcium phosphate oligomers (CPOs) and sodium alginate (SA). Unlike conventional nanoparticle-based composites, the strong ionic interactions between Ca 2+ and the carboxyl groups of SA stabilized highly reactive CPOs and directed their transformation into small-sized hybrid hydroxyapatite nanostructure aligned along the polymer chains. This molecularly integrated organic–inorganic architecture alleviates the intrinsic brittleness of mineral phases by reducing ionic crosslinking, while simultaneously imparting stiffness and strength. Structural analyses (XRD, XAFS, XPS, and FTIR) confirm reduced Ca–Ca coordination, anisotropic crystallinity, homogeneous dispersion, and robust interfacial bonding, evidencing an organic–inorganic hybridization rather than a particulate composite. The resulting films exhibit superior tensile strength (65.8 ± 7.7 MPa), a threefold increase in elastic modulus compared with pure SA, and a compact, phase-uniform morphology. In addition, the CPO-SA surface shows enhanced roughness and wettability, enabling smooth ink adhesion and excellent writability, which surpass both SA and conventional calcium phosphate nanoparticle (CPN)-SA composites. The combined stiffness, intrinsic printability, water tolerance, and environmentally benign degradation address a critical unmet need in sustainable packaging. More broadly, this oligomer-directed strategy establishes a generalizable design principle for engineering polymer-like mineral architectures and advances a versatile platform for next-generation sustainable “mineral plastics”.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·Vol. 14
·期 27
·12026-12036
·
IF 7.6
Zhong Haojia,Liu Hongchen,Yang Fan,Sun Xinyang,Gao Fuming,Zhang Xiaona,Wei Kexin,Wang Kuobo,Li Shijia,Li Zhenxing,Wang Chunxia,Li Yongfeng
Copper-based electrocatalysts demonstrate significant potential for electrochemical CO 2 reduction toward value-added chemicals. However, achieving selective synthesis of multi-carbon (C 2+ ) products on copper-based catalysts remains a substantial challenge. In this study, a Cu 2 O electrocatalyst (Mg 0.1 -Cu 2 O-SC) doped with magnesium (Mg) and surface-modified by sodium citrate (SC) was successfully synthesized via a simple wet chemical reduction method. The Mg 0.1 -Cu 2 O-SC achieves a Faradaic efficiency (FE) of 77.8% and a partial current density of 357.9 mA cm −2 for C 2+ products, which is 1.35 times higher than the FE of unmodified Cu 2 O. Mg 0.1 -Cu 2 O achieves an enhancement in the FE for CO, demonstrating that the Lewis-acidic Mg weakens the bond strength of Cu−*CO and enhances the local concentration of *CO by attracting electrons from Cu. In situ spectroscopic analysis reveals that the surface modification of SC facilitates the *CO to *CHO hydrogenation, which shifts the C−C coupling to a more favorable *CO−*CHO route with a lower-energy barrier and consequently improves the FE for C 2+ products. Theoretical calculations indicate that the electron-withdrawing effect of Mg induces a downward shift in the copper d-band center. Energy barrier analyses reveal that SC effectively lowers the energy barriers for both the water dissociation reaction and the *CO−*CHO coupling reaction. This work confirms that Mg effectively modulates the adsorption behavior of key intermediates and synergistically optimizes the reaction pathway in concert with SC.
✓ 已验证
DOI
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2026
·Vol. 74
·期 32
·25595-25606
·
IF 6.7
Peng Qingqing,Tang Wei,Chen Siqi,Song Yuan,Wang Zhongliang,Li Gang,Chai Fang
Herein, silver nanoclusters (FO-Ag NCs) were synthesized
using
folic acid and O-phenylenediamine as ligands, with an emission at
578 nm when excited at 410 nm. The FO-Ag NCs achieved multivariate
determination for Hg 2+ and bovine serum albumin (BSA) via
two strategies. Initially, Hg 2+ quenched the emission,
while BSA enhanced it with a blue shift (578 to 558 nm), with detection
limits (LOD) of 96 nM and 0.60 μM, respectively. Another strategy,
cascade detection based on BSA recovering the Hg 2+ quenched
emission, was accomplished with an LOD of 1.26 μM for BSA. These
two strategies ensured the sensing accuracy by self-calibration. The
smartphone supporting portable sensing enabled rapid on-site analysis
in food and water with satisfied recoveries (94.22–106.09%
for Hg 2+ and 97.31–112.51% for BSA), and the reliability
was confirmed by ICP-MS and ELISA. The multivariate sensing protocol
demonstrated potential applications for environmental monitoring and
food safety.
✓ 已验证
产品关联
DOI
高影响因子
BIOCONJUGATE CHEMISTRY
·
2026
·Vol. 37
·期 8
·1731-1738
·
IF 4.5
Gao Fei,Wang Kai,Liang Feng-Ming,Feng You-Zhen,Cheng Zhong-Yuan
Acute lung injury (ALI) involves inflammatory dysregulation
and
oxidative stress, processes in which cysteine (Cys), an endogenous
sulfur-containing biothiol, participates through thiol redox homeostasis.
We designed HD-Cys, an activatable hemicyanine probe, to visualize
Cys in real-time in an LPS-induced murine ALI model. The reaction
with Cys releases the emissive HD form and produces a pronounced near-infrared
turn-on response. HD-Cys showed high selectivity, a detection limit
of 160 nM, and a linear concentration-dependent response. Its performance
was examined in BEAS-2B cells, serum, and mice with LPS-induced ALI.
After probe administration, pulmonary fluorescence was stronger in
ALI mice than in normal controls and decreased following N -ethylmaleimide (NEM)-mediated thiol depletion. Together, these findings
establish HD-Cys as an experimental tool for tracking Cys-associated
thiol redox changes during inflammatory lung injury.
✓ 已验证
DOI
高影响因子
ACS Applied Polymer Materials
·
2026
·Vol. 8
·期 15
·13358-13365
·
IF 5.2
Wang Feifei,He Mantang,Yang Yanan,Hu Hongmei,Han Chaofeng,Li Yaping,Cao Jiliang
With the rapid advancement of electronic devices, electromagnetic
radiation has increasingly caused environmental interference, thereby
stimulating the development of flexible and wearable electromagnetic
interference (EMI) shielding materials. However, it remains challenging
to achieve EMI shielding textiles that simultaneously possess facile
fabrication, high shielding efficiency, and excellent durability.
Herein, a multilevel composite conductive network composed of reduced
graphene oxide (rGO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)
(PEDOT:PSS) was successfully constructed on silk fabric (SF) via a
layer-by-layer self-assembly strategy, resulting in a flexible EMI
shielding fabric (SF-PEDOT:PSS-rGO). Specifically, PEDOT:PSS formed
a uniform conductive coating through in situ polymerization, while
rGO further established a continuous conductive network and strengthened
the interfacial interactions among the different components. Benefiting
from the synergistic effect conductive network and interfacil interactions
among PEDOT:PSS, rGO, and SF, the resulting textile exhibited outstanding
EMI shielding performance with a maximum shielding efficiency of approximately
80%. Moreover, the fabric demonstrated excellent durability, retaining
over 80% of its initial shielding efficiency after 30 washing cycles,
while maintaining stable surface resistance and EMI shielding performance
during repeated folding and tape-peeling tests. This study provides
an effective strategy for constructing durable multilevel conductive
networks on textile substrates and offers valuable guidance for the
development of high-performance wearable EMI shielding materials.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·Vol. 18
·期 32
·44222-44235
·
IF 7.8
Wang Xiyao,Liang Jiaju,Ji Huiyu,Zhang Jian,Lin Lin,Liang Hengnan
Optical manometry is essential in diamond anvil cell experiments, motivating pressure-sensitive phosphors that provide robust broadband readouts over a wide pressure range. Here we report a Ce 3+ -activated CaZrO 3 perovskite phosphor with a low dopant level of about 0.40 atom % Ce quantified by EDS, and we evaluate its pressure-dependent luminescence response. Powder XRD and SEM–EDS confirm a single-phase CaZrO 3 host and successful incorporation of the Ce activator. Temperature-dependent photoluminescence and lifetime measurements reveal that the material exhibits good thermal stability. Under compression up to 45 GPa, the broadband Ce 3+ 5d–4f emission exhibits an almost linear redshift of the band centroid with dλ/d P about 2.45 nm GPa –1 and a concurrent broadening of FWHM with dFWHM/dP about 1.15 nm GPa –1 . In parallel, the CIE 1931 chromaticity coordinates derived from the full emission spectrum evolve regularly with pressure, enabling a continuous color change from blue to green and offering a convenient visual readout. High-pressure Raman spectra indicate a structural transition near 30 GPa, consistent with synchrotron XRD reports for CaZrO 3 , yet no discontinuity is observed in the pressure dependences of the luminescence parameters. First-principles calculations suggest that compression is mainly accommodated by ZrO 6 octahedral tilting and anisotropic polyhedral compression, whereas the local Ce-O crystal-field environment evolves smoothly, accounting for the continuous optical response through the transition. These results establish CaZrO 3 :Ce 3+ as a wide-range, multi-parameter optical manometer for high-pressure calibration at room temperature.
✓ 已验证
DOI
PubMed
高影响因子
MACROMOLECULES
·
2026
·Vol. 59
·期 14
·8321-8327
·
IF 5.7
Chen Yin An,Wang Xiaoyuan,Liao Hongguang,Fang Lulin,Li Xiang,Zhu Caizhen,Fan Hailong
Protein mechanical responses are governed not only by
dynamic noncovalent
interactions but also by their local sequence organization. Inspired
by this principle, we study a hydrophobic polyelectrolyte with a statistically
enriched neighboring distribution of cationic and aromatic monomers.
In water, concentrated solutions of this polymer undergo reversible
shear-induced gelation, transforming from viscous liquids into transient
gel-like states under shear and recovering fluidity after the removal
of stress. This transition depends strongly on concentration and shear
rate, indicating a concentration-dependent entangled state that becomes
increasingly susceptible to network formation under flow. A nonaromatic
control polymer does not exhibit this behavior. In saline media, electrostatic
screening drives the system into a salt-induced associated state,
yet the reversible shear-induced transient gel-like transition persists.
The gelation transition and the dimensions of rodlike aggregates both
depend on the identity of the added alkali metal cation. Because this
ion dependence follows the known aqueous cation−π competition
trend, the results identify cation−π interactions as
the dominant sequence-specific driving force. These findings show
that statistical enrichment of neighboring cation–arene motifs
can encode protein-like force responsiveness in synthetic polymers.
✓ 已验证
产品关联
DOI
高影响因子