ACS Applied Polymer Materials
·
2026
·Vol. 8
·期 14
·11286-11295
·
IF 5.2
Zhang Yihao,Zhao Zhuang,Rong Youjie,Hu Jiutao,Xue Jixiang,Huang Xiaobo,Yao Xiaohong
Gel electrolytes have emerged as key components in energy
storage
devices. However, conventional gel electrolytes often exhibit limited
deformation resistance and inadequate mechanical recovery under sustained
external stress, which compromises their long-term operational stability.
Herein, we report a self-healing eutectogel electrolyte comprising
a choline chloride-ethylene glycol deep eutectic solvent (ChCl-DES)
as the dispersion medium and a poly[2-(hydroxyethyl acrylate)] (PHEA)
polymer network. The incorporation of boric acid (BA) and polyethylene
glycol (PEG) enables the formation of dynamic borate ester bonds through
interactions with hydroxyl groups. The reversible rupture and reformation
of these dynamic covalent linkages impart robust self-healing capabilities
to the material. The resulting eutectogel achieves an elongation at
break of up to 1190% and exhibits a self-healing efficiency of 82%
after 24 h. Moreover, supercapacitors assembled with this eutectogel
electrolyte deliver an areal capacitance of 183 mF/cm 2 at
a current density of 3 mA/cm 2 . This work provides a design
strategy for the development of high-performance and durable energy
storage devices, demonstrating significant potential for applications
in flexible electronics and smart sensing systems.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·Vol. 18
·期 30
·41550-41565
·
IF 7.8
Liang Siyun,Yang Peiwen,Qu Yuchen,Lan Jinle,Li Gang,Yang Xiaoping
Structural health monitoring (SHM) of carbon fiber-reinforced polymer (CFRP) composites requires sensing systems that are both highly sensitive and structurally compatible. Herein, a dual-mode self-sensing strategy is developed by constructing a perylene diimide/graphene oxide (PDI/GO) heterojunction-engineered interphase in carbon fiber (CF-PDI/GO)/epoxy (EP) composites through synergistic covalent bonding and π−π interactions, thereby simultaneously tailoring π-electron transfer channels and interfacial properties. Formed via π−π stacking between GO and PDI, the PDI/GO heterojunction shows a mechano-responsive fluorescence “off−on” behavior driven by efficient electron transfer via long-range electron delocalization. In contrast to CF-PDI, CF-PDI/GO exhibits quenched fluorescence alongside enhanced conductivity and chemical activity, causing enhancements of 222.9% in electrical conductivity, 82.5% in interfacial shear strength, and 123.9% in transverse fiber bundle tensile strength of CF-PDI/GO/EP composites (vs CF-desized/EP). Under mechanical stimuli, an obvious electrical resistance change is observed with fluorescence “switching-on” signals at damaged regions, which is attributed to breakage of long-range π-electron channels between CF and the PDI/GO heterojunction. Benefiting from its inherent self-sensing mechanism, electrical impedance tomography (EIT) is used for in-situ and real-time damage visualization with higher sensitivity compared to infrared thermography (IRT). This work presents a heterojunction-enabled interphase engineering strategy for simultaneously reinforcing and sensing CFRP composites, offering a pathway toward next-generation smart structural materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF PHYSICAL CHEMISTRY B
·
2026
·Vol. 130
·期 29
·7433-7443
·
IF 3.2
Ma Jing,Yamaguchi Toshio,Tseng Jochi,Yamada Hiroki,Yu Zhiwu,Zhou Yongquan
The concentration-dependent local
structure and ion solvation behavior
in sodium triflate NaOTf/dimethoxyethane (DME) electrolytes were systematically
investigated by integrating large-angle X-ray scattering (LAXS) with
atomic modeling, IR, and density functional theory (DFT) calculations
across a range of salt concentrations ( x (NaOTf) =
0, 0.05, 0.1, and 0.2). LAXS data-driven all-atomic modeling reveals
that Na + ions preferentially induce DME to adopt the trans–gauche–trans
(TGT) conformation, with each DME molecule coordinating to Na + in a bidentate chelation mode via both oxygen atoms. Quantitative
analysis of center-of-mass radial distribution functions shows that
the average number of DME molecules coordinating to Na + decreases from 2.2 at x (NaOTf) = 0.05 to 1.1 at x (NaOTf) = 0.2, while the average number of associated OTf – anions per Na + increases from 0.9 to 2.3
over the same concentration range. Pair distribution functions combined
with DFT-optimized cluster geometries indicate that Na + maintains a total coordination number of 5.4–5.8, with concentration-dependent
contributions from the oxygen atoms in both DME and OTf – . The Na + -OTf – contact ion pairs exhibit
two distinct configurations: bidentate (CIPB) with a Na–S distance
of 2.94 Å and monodentate (CIPM) with a Na–S distance
of 3.69 Å. The fraction of CIPB decreases from 56% at x (NaOTf) = 0.05 to 28% at x (NaOTf) = 0.2,
while the fraction of CIPM increases correspondingly from 44% to 72%.
Speciation analysis based on coordination number distributions reveals
that at x (NaOTf) = 0.05, 49% of Na + exists
as [Na-3DME] + , 44% as neutral [Na-1OTf-2DME] 0 , and 7% as anionic [Na-2OTf-1DME] − ; at x (NaOTf) = 0.2, the dominant species becomes [Na-2OTf-1DME] − (35%), followed by [Na-3OTf] 2– (29%),
with only 20% remaining as neutral [Na-1OTf-2DME] 0 . This
systematic evolution from solvent-separated ions to contact ion pairs
and higher-order ionic aggregates with increasing salt concentration
provides a quantitative structural basis for understanding the nonlinear
ionic conductivity behavior in glyme-based sodium electrolytes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of the American Chemical Society
·
2026
·Vol. 148
·期 30
·32768-32781
·
IF 16.6
Feng Kai,Qian Shuairen,Liu Xiaozhi,Shen Yang,Li Zhengwen,Chen Yuxin,Tian Jiaming,He Le,Zhang Xiaohong,Cheng Yi,Su Dong,Yan Binhang
The Haber–Bosch ammonia synthesis is a cornerstone
of global
agriculture and the chemical industry, yet it is fundamentally constrained
by intrinsic scaling relations, necessitating energy-intensive conditions
associated with a significant carbon footprint. Herein, we report
a surface redox-mediated chemical looping strategy that utilizes the
CO 2 hydrogenation reaction as a chemical trigger to drive
ammonia synthesis at atmospheric pressure over a cobalt–molybdenum
bimetallic nitride (Co 3 Mo 3 N) nitrogen carrier.
Mechanistic investigations reveal that CO 2 induces a dynamic
surface oxidation that weakens the intrinsic Mo–N bonds and
facilitates the hydrogenation and release of lattice nitrogen as NH 3 . The cycle is closed by a subsequent nitridation step that
removes surface oxygen and regenerates the nitride lattice. This redox-mediated
mechanism enables an unprecedented NH 3 peak concentration
of ∼2.3% and a release rate of 12.4 mmol·g cat –1 ·h –1 at 500 ° C under
atmospheric pressure, circumventing the thermodynamic limitations
that historically hinder low-pressure ammonia synthesis. Our findings
demonstrate how dynamic surface engineering can decouple kinetic limitations
from thermodynamic constraints, offering a novel paradigm for sustainable
nitrogen fixation coupled with carbon utilization.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2026
·Vol. 18
·期 31
·43449-43458
·
IF 7.8
Peng Shuqiang,Yang Shuohui,Tian Yonggang,Liu Ziheng,Lei Xiaoyu,Chen Yuping,Peng Xiangfang
Achieving precise refractive index matching alongside mechanical robustness remains a bottleneck for high-performance antireflective (AR) coatings. Herein, we propose a synergistic composition-regulation and interface-welding strategy that fundamentally decouples the intrinsic trade-off between optical transparency and mechanical integrity in porous optical thin films. By blending hollow silica nanoparticles (HSNs) and solid silica nanoparticles (SSNs) at precisely controlled volume ratios, the effective refractive index of the coating is continuously tunable over a range from 1.27 to 1.18. At the optimal ratio, the coating delivers a peak transmittance of 98.86% and a transmittance enhancement of 8.8%. Simultaneously, a mild vapor-phase ammonia treatment is employed to catalyze interfacial Si–OH condensation, thereby constructing a continuous Si–O–Si covalent network. This welding process preserves the hollow structure with negligible optical loss (<0.25%) while imparting exceptional durability. The coating maintains >98% transmittance after undergoing three separate durability tests: 80 abrasion cycles (500 g load), five sand impacts, and high-pressure water jetting. This work provides a universal pathway for fabricating multifunctional AR coatings with tailorable indices and superior durability for demanding outdoor photovoltaic and optoelectronic applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 5.2
Xu Xiaowen,Wang Jiesheng,Zheng Haoyuan
Tuna is valued for its nutritional
benefits, but significant
waste
occurs due to inaccurate shelf life estimations. Herein, we developed
a multifunctional, mechanically robust, and highly sensitive visual-sensing
hydrogel tailored for real-time tuna freshness monitoring. The system
is constructed from a sodium alginate/polyacrylamide matrix reinforced
with tannic acid-coated cellulose nanocrystals. This structural design
endows the hydrogel with exceptional stretchability, toughness, antifatigue
properties, and tear resistance, successfully overcoming the mechanical
fragility of traditional hydrogels. Furthermore, the catechol groups
from tannic acid provide reliable multisubstrate adhesiveness, alongside
intrinsic antioxidant and highly effective antimicrobial activities
against Candida albicans and Staphylococcus aureus , ensuring the hygienic stability
of the sensor in packaging environments. For visual freshness detection,
a pH/NH 3 dual-responsive thymol blue was embedded into
the matrix. The hydrogel indicator successfully tracked yellowfin
tuna spoilage at both 4 and 25 ° C, delivering distinct visual
color changes (Δ E > 50). These color transitions
exhibited strong linear correlations ( R 2 > 0.97) with key freshness indicators, including Δ E vs pH, Δ E vs TVB-N, and TVB-N vs
pH. This work presents a highly durable and accurate intelligent packaging
material for visual freshness monitoring, offering a promising strategy
to improve food safety and reduce waste in the seafood industry.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·Vol. 18
·期 31
·42780-42788
·
IF 7.8
Zou Lie,Huang Xiao-Yan,Zhang Yi,A Yao-Lin,Xu Qing-Chi,Chen Bing-Hui,Liu Jinxuan,Zhang Hua,Li Jian-Feng
Understanding the molecular origins of oxygen reduction reaction (ORR) activity on Pt-based catalysts is essential for the rational design of high-performance electrocatalysts. Herein, by combining electrochemical measurements with in situ shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), we systematically investigate the ORR pathway on Pt-based alloy nanocatalysts incorporating different transition metals to elucidate how surface oxygenated intermediates dictate ORR activity. Among the catalysts examined, PtNi exhibited higher activity than PtFe, PtCo, and commercial Pt/C, underscoring the pronounced sensitivity of intrinsic ORR activity to alloy composition. Potential-dependent in situ Raman spectra, corroborated by isotopic labeling, directly identified *OOH as a key ORR intermediate and established a clear correlation between its vibrational frequency and catalytic activity. The results suggest that Ni alloying may modify the electronic environment of Pt, thereby weakening the Pt-O interaction, optimizing the adsorption state of the kinetically relevant *OOH intermediate, and consequently promoting ORR kinetics. This study establishes an effective spectroscopic platform for probing ORR intermediates on realistic electrocatalyst surfaces and offers molecular-level understanding of the activity enhancement in Pt-based alloy catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Nano
·
2026
·Vol. 20
·期 31
·22195-22214
·
IF 17.3
Feng Yu,Li Jiankun,Wu Cong,Hou Senlin,Liu Yehui,Sun Hui,Chen Meng,Li Ziyi,Li Zhi,Zhang Guanglie,Wang Steven,Roy Vellaisamy A. L.,Yu Xinge,Li Wen Jung
Soft dual-modal tactile sensors capable of simultaneously
sensing
force and temperature are essential for enhancing human-like perception
and interaction in robots, particularly in the functional sense of
concurrent mechanical and thermal perception. However, achieving self-decoupled
and high-fidelity dual-modal sensing remains a significant challenge
due to intrinsic signal crosstalk, structural complexity, and limited
flexibility in existing designs. Here, we present a soft robotic tactile
(RoboTac) skin that intrinsically decouples force and temperature
using an ionic conductive film within a minimalist architecture, featuring
an ultralight weight and an ultralow cost. Ionic conductivity enables
independent readouts without algorithmic compensation by allowing
thickness compression to modulate capacitance (force) and lateral
ionic transport under thermal stimuli to modulate resistance (temperature).
Moreover, the RoboTac skin demonstrates its practical utility for
robots in object perception, specialized tasks, and human–robot
interaction. This work establishes a general principle for intrinsically
self-decoupling modalities in tactile sensors, advancing multimodal
sensing, intelligent perception, and embodied robotics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2026
·Vol. 74
·期 30
·23698-23711
·
IF 6.7
Song Jun,Qin Yutong,Jin Lu,Han Liang,Li Shihan,Wu Shijuan,Shen Pan,Chen Yanling,Liu Yaqi,Cao Yan,Li Juan,Li Ying,He Qi,Huang Wei
Benzylisoquinoline alkaloids (BIAs) hold broad pharmaceutical
potential,
yet poor water solubility and low bioavailability limit their application.
Glycosylation improves these properties, but glycosyltransferases
(GTs) efficiently catalyzing diverse BIAs remain scarce. Here, we
identify UGT74AN1 from Asclepias curassavica , capable of glycosylating various BIAs. Structure-guided semirational
engineering yielded the double mutant UGT74AN1 M2 , exhibiting
a 341-fold increase in catalytic efficiency. Molecular dynamics simulations
revealed that these mutations widen the substrate channel and strengthen
binding. To overcome UDP-glucose dependency, we designed the fusion
enzyme AtSuSy-L12-UGT74AN1 M2 via the iMARS platform, enabling in situ UDP-glucose generation coupled with highly efficient
BIA glycosylation. Consequently, the synthesized dihydrojatrorrhizine-3- O -β- d -glucoside ( 1b ) demonstrated
superior antitumor activity compared to its aglycone through stronger
proliferation inhibition and apoptosis induction. This work provides
an efficient enzymatic toolkit for green BIA glycoside synthesis and
identifies promising candidates for drug development.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2026
·Vol. 9
·期 14
·9243-9254
·
IF 5.5
Gao Song,Wu Haijun,Tong Bo,Xia Shuanghong,Ai Shun,Huang Aigen,Li Tao
Aqueous zinc metal batteries (ZMBs) have emerged as a promising alternative to lithium-ion batteries, owing to their high theoretical capacity, low redox potential, and intrinsic safety. However, the Zn anode suffers from three interrelated critical issues (Zn dendrite growth, the hydrogen evolution reaction (HER), and corrosion reaction), which collectively impede the practical application of ZMBs. Herein, we focus on addressing HER and corrosion reaction via electrolyte modification to boost the overall performance of ZMBs. Pyrrolidone carboxylic acid (PCA), a natural moisturizing factor (NMF), was introduced as an additive into the ZnSO 4 electrolyte, with two synergistic functions: (1) forming stronger hydrogen bonds with H 2 O molecules that reduce water activity to suppress HER; and (2) dissociating and creating an acidic environment that eliminates the corrosion products Zn 4 SO 4 (OH) 6 · x H 2 O and its analogs (collectively referred to as ZSH) to mitigate corrosion reaction. Benefiting from these effects, the Zn||Zn symmetric cell maintained stable cycling for 5000 h at 1 mA cm –2 and 1 mAh cm –2 (only 220 h without PCA), the Zn||Cu asymmetric cell exhibited a high coulombic efficiency of 99.66% at 1 mA cm –2 (only 98.30% without PCA), and the Zn||V 2 O 5 full cell still delivered a high discharge capacity of 116.3 mAh g –1 at 1200th cycle at 5 A g –1 (only 69.7 mAh g –1 without PCA). This work provides a facile and eco-friendly strategy for constructing highly reversible Zn anodes and high-performance ZMBs.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·Vol. 65
·期 28
·15242-15253
·
IF 3.9
Xu Zhen,Liu Zheng,Meng Lina,Lu Yuan,Fan Shiguang,Chen Feng,Wang Yiwei,Sun Qiang,Guo Xuqiang
The
valorization of nitrogen-rich low-grade natural gas (N 2 -lgNG) presents a dual challenge of mitigating greenhouse
gas emissions and securing strategic helium resources. This study
demonstrates the technical feasibility and optimization of a two-stage
hydrate-based gas separation (HBGS) process for the simultaneous capture
of light hydrocarbons (methane and ethane) and enrichment of low-abundance
helium (0.52 mol %) as a crucial industrial pretreatment step. A systematic
methodology integrating response surface methodology (RSM) and multiobjective
optimization was employed. RSM was used to develop accurate proxy
models that quantify the effects of the gas–liquid ratio (GLR),
temperature ( T ), and pressure ( P ) on three key separation performance metrics: light hydrocarbon
capture rate (CR LH ), helium concentration in the residual
gas (cHe res ), and helium recovery rate (RR He ). The analysis identified temperature as the most sensitive parameter
for separation performance. The nondominated sorting genetic algorithm
II (NSGA-II) was applied to proxy models to generate a Pareto-optimal
frontier of solutions. The entropy-weighted technique for order of
preference by similarity to ideal solution (TOPSIS) was then utilized
to impartially select the single best-compromise operating condition:
GLR of 90 N m 3 /m 3 , T of 279.15
K, and P of 5.00 MPa. Experimental validation under
the optimal conditions achieved a CR LH of 91.05%, a 6.3-fold
increase in cHe res (reaching 3.27 mol %), and an RR He of 78.25%. This work not only proves the efficacy of the
two-stage HBGS process for integrated resource recovery from challenging
gas streams but also establishes a model-driven optimization framework
for the design of HBGS technology.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·Vol. 14
·期 29
·13031-13041
·
IF 7.6
Luo Qionglin,Xu Zhen,Zhang Sitian,Li Zhiling,Ren Kaixiang,Ding Can,Li Yongtao,Peng Cong,Zeng Shunqin
PEO-derived polymer electrolytes hold promise for economical, deformable lithium metal batteries with elevated energy density. Nevertheless, their deployment is constrained by insufficient Li + transport, restricted electrochemical stability, uncontrolled Li dendrite proliferation, and inferior anode cyclability. Herein, we introduce oxygen-deficient Nb 2 O 5 (Ov-Nb 2 O 5 ) into a polyethylene oxide host to fabricate an innovative solid-state electrolyte. The Ov-Nb 2 O 5 particles anchor PEO chains via Lewis acid−base interaction, forming a robust oxide−polymer interface. This interaction effectively prevents filler aggregation and reduces PEO crystallinity, yielding a homogeneous electrolyte membrane with enhanced mechanical strength. The resulting architecture accelerates Li + migration across the polymer, thereby elevating ionic transport and restraining dendrite advancement. The PEO/LiTFSI/10%Ov-Nb 2 O 5 electrolyte demonstrates a conductivity of 2.5 × 10 −4 S cm −1 alongside a Li + transference number of 0.63 at 60 ° C. Furthermore, Li-metal symmetric cells sustain steady deposition/dissolution exceeding 1500 h under 0.2 mA cm −2 . When paired with a LiFePO 4 cathode, the full cell achieves a reversible capacity of 121.4 mAh g −1 at 0.5 C and retains 91.7% of its capacity after 400 cycles. This investigation underscores an effective approach for engineering multifunctional fillers toward advanced solid electrolytes featuring rapid ion conduction and exceptional interfacial durability.
✓ 已验证
产品关联
DOI
高影响因子