INORGANIC CHEMISTRY
·
2026
·
IF 4.6
Jiang Yue,Dong Junjie,Chen Min,Hu Youcai,Tang Renjian,Chen Jingling,Wang Juan,Guo Fengwan
Zero-dimensional hybrid metal halides (0D HMHs) are attractive
candidates for room-temperature phosphorescence (RTP). However, most
existing 0D HMHs emit a single color, making it challenging to achieve
multicolor luminescence and multistimuli responsiveness while preserving
persistent afterglow. In this work, we prepared the 0D hybrid zinc
halide material [i-PrTPP] 2 ZnBr 4 . Benefiting
from hydrogen-bond networks and the heavy atom effect, this material
delivered long-lived cyan RTP. Its phosphorescence lifetime reaches
414.92 ms, and the photoluminescence quantum yield (PLQY) is 22.12%.
We further doped the host with Sb 3+ and Mn 2+ . The doped samples emit red fluorescence (PLQY = 51.92%) and green
fluorescence (PLQY = 93.57%) separately, while the original cyan phosphorescence
is retained. The Mn 2+ -doped material also shows an unusual
mechanoluminescence (ML). Increasing the dopant concentration enhances
the energy-transfer efficiency from the organic triplet (T 1 ) state to the dopant ions, thereby enabling temporal modulation
of the luminescence. Combining dual-mode emission, ML, and temporal
regulation, these materials can be used for dynamic optical encoding
and information encryption. This study offers a new route to develop
multiresponsive luminescent materials and advanced dynamic anticounterfeiting
techniques.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2026
·
IF 12.2
Zhao Yannan,Wang Luming,Zhang Xianglan,Tang Tao,Zhao Meirong,Lv Lu,Yue Siqing
Pollinator
risk assessment for emerging neonicotinoids still relies heavily on
lethality-oriented apical end points, which may miss the intake region
in which sensory or behavioral impairment emerges without overt mortality.
We asked whether imidaclothiz (IMT) produces neurofunctional impairment
at realized intakes below those associated with reduced survival.
Adult worker honey bees ( Apis mellifera ) were exposed to IMT for 10 days, and realized-intake dosimetry
was combined with benchmark-dose (BMD) modeling for survival, electroantennography
(EAG), proboscis extension reflex (PER), and untargeted head-tissue
metabolomic end points. Across alternative lower-tail summaries, metabolomic
BMDs extended below the Day-10 mortality BMD 10 (≈0.107
μg bee –1 day –1 ) and overlapped
with the lowest EAG and PER benchmarks. This cross-level alignment
supports the interpretation that lower-tail molecular sensitivity
summaries and selected neurofunctional benchmarks occupy an intake
region that lethality-based end points alone do not resolve. Dose-responsive
metabolomic features were tentatively assigned to tryptophan–kynurenine
and glycerophospholipid/redox-related pathways; orthogonal protein
measurements showed broad concordance with these metabolomic patterns.
By placing molecular, neurofunctional, and apical responses on a common
realized-intake scale, this cross-level BMD comparison approach supports
characterization of sublethal neonicotinoid risk in pollinators.
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2026
·Vol. 42
·期 22
·15967-15977
·
IF 4.4
Zhang Li,Zhang Wenhao,Wang Zhaomeng,Fan Sining,Xia Puyue,Tang Shaolong
Porous gold materials, with advantages such as low relative
density
and high chemical stability, are widely used in biosensing, chemical
energy storage, etc. Currently, traditional methods still face challenges
in the preparation of ultrafine nanoporous gold microspheres, which
limit their application in advanced electronic packaging. In this
study, we propose a strategy for the controlled preparation of nanoporous
gold microspheres using low-gold-content alloy microspheres, which
includes wet chemical reduction, crystal diffusion and growth, liquid–solid
interfacial nonwetting effect, and chemical-free corrosion dealloying.
Nanoindentation results show that, compared to the brittle crushing
under deep pressing of polymer microspheres, the newly prepared nanoporous
gold microspheres exhibit significantly low-pressure-stable deep-press
anisotropic conductive properties. Specifically, the nanoporous gold
microspheres achieve up to 80% compression deformation under a load
of approximately 5 mN, primarily due to their unique nanoporous structure,
reducing hardness. In terms of piezoresistive performance, the nanoporous
gold microspheres maintain stable low-resistance conductive properties
during both loading and unloading processes, which is mainly attributed
to the large compression deformation enhancing the connection reliability
between substrates. When applied to anisotropic conductive film preparation
and device encapsulation testing, the results demonstrate that with
a powder loading of 5 wt %, the nanoporous gold microsphere-based
anisotropic conductive film exhibits a significantly wide pressure
encapsulation range (0.1–0.5 MPa), which is directly related
to the large compression deformation ability of the nanoporous gold
microspheres. This ability can not only reduce the requirement for
uniform particle size distribution and save sorting costs but also
effectively improve the conductivity of interconnected devices.
✓ 已验证
DOI
PubMed
高影响因子
ACS Photonics
·
2026
·Vol. 13
·期 16
·4922-4933
·
IF 6
Zhang Mingdi,Chen Huahao,Ge Shuangkang,Wang Chenjiang,Gao Wei,Han Qingyan,Dong Jun,Zhang Chengyun
Surface plasmons modulate rare-earth luminescence via
local field
enhancement and photothermal effects, yet the synergy-competition
between these inherently coupled effects remains to be decoded, impeding
precise level-selective control. Herein, we construct a Yb 3+ , Er 3+ upconversion system with different metals (Au/Ag
nanoislands) and host morphologies (prism/plate), and combine steady-state
spectroscopy, fluorescence lifetime dynamics, and multiphysics simulations
to decode their interplay. We unveil pronounced level selectivity:
the 2 H 11/2 → 4 I 15/2 transition is dominated by field enhancement, whereas the 4 S 3/2 → 4 I 15/2 and 4 F 9/2 → 4 I 15/2 transitions exhibit
a synergy-competition between field enhancement and nonradiative processes.
Ag nanoislands, owing to dense coverage, create strong near-field
coupling that boosts 520 nm emission but simultaneously introduce
additional nonradiative decay channels, limiting lifetime extension.
Dispersed Au nanoparticles, by contrast, form weaker coupling that
suppresses nonradiative losses, resulting in a markedly prolonged
excited-state lifetime. Host morphology further governs the field–thermal
balance: plate-like crystals realize tighter plasmon coupling and
higher enhancement under single-wavelength excitation, yet their smaller
volume and reduced heat capacity lead to more pronounced thermal quenching
under dual-wavelength coexcitation. Prism-like crystals, benefiting
from larger metal-ion separation and greater thermal mass, achieve
superior net enhancement at 520 nm. Simulations corroborate the near-field
and thermal origins of these behaviors. This work decodes the synergy-competition
landscape, establishing a design framework for level-selective rare-earth
luminescence and tunable photonic devices.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sensors
·
2026
·
IF 10.9
Zhang Xue,Sun Jiaxing,Wang Yuchen,Zhang Ziqi,Wang Duojia,Liu Kai,Tian Weiliang,Zhang Kewei
Atomically thin, two-dimensional (2D) semiconductors offer unprecedented opportunities for high-performance gas sensing, while the limited surface accessibility of their bulk counterparts severely restricts their practical applications. Herein, ultrathin graphitic carbon nitride (g-C 3 N 5 ) nanosheets with an average thickness of ∼1.7 nm were successfully synthesized via a facile and scalable sulfuric acid-assisted intercalation–exfoliation strategy using bulk g-C 3 N 5 derived from the thermal polymerization of 3-amino-1,2,4-triazole. The exfoliation process effectively tailors the electronic structure and maximizes the exposure of nitrogen-rich active sites, enabling enhanced surface adsorption and accelerated charge transfer. As a result, the as-prepared g-C 3 N 5 nanosheets exhibit outstanding room-temperature ammonia (NH 3 ) sensing performance, delivering a high sensitivity of 22.27 ppm –1 , a low detection limit of 27 ppb, and excellent selectivity under complex gas environments. Notably, the integration of g-C 3 N 5 nanosheets onto a flexible porous substrate further enables robust mechanical stability and efficient gas diffusion, supporting reliable operation under bending and long-term use. More importantly, the sensor demonstrates the capability to discriminate pulmonary infection patients from healthy individuals through exhaled breath analysis, highlighting its potential for non-invasive clinical diagnostics. This work not only provides an effective strategy for constructing high-performance carbon nitride-based gas sensors but also offers a promising platform for wearable healthcare monitoring and early disease detection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 5.2
Chen Yixiang,Wang Jiabo,Zhang Yutao,Zhang Xianhong,Yang Wantai
Introducing
siloxane components into polymer molecular chains can
impart materials with unique properties such as low surface energy,
antifouling, and wear resistance. In this work, we synthesized cross-linked
polymeric microspheres via a self-stabilized precipitation polymerization
(2SP) strategy involving vinyl chloride (VC), vinyl polydimethylsiloxane
(VPDMS), and diallyl maleate (DAM), followed by an investigation of
their (CL-P[(VC)- co -(VPDMS)]) effects within the
PVC matrix. Fourier infrared spectroscopy (FTIR), solid-state 13 C nuclear magnetic resonance (SS 13 C NMR), proton
nuclear magnetic resonance ( 1 H NMR), and X-ray photoelectron
spectroscopy (XPS) confirmed the successful synthesis of cross-linked
copolymers. By adjusting the feed ratio of DAM, the copolymer microspheres
with controllable gel content (GC, 20–95%), tunable number-average
diameter ( D n , 400–1400 nm), and
uniform particle size distribution (PSD, ∼1.02) could be obtained.
By employing CL-P[(VC)- co -(PDMS)] as a polymeric
filler in a rigid PVC system, it exhibited polymeric lubricant features
during the processing, where the plasticizing time increased and the
melt temperature has a slight decrease with the filler content. Simultaneously,
CL-P[(VC)- co -(VPDMS)] also demonstrates good wear
resistance. For instance, by adding 3 phr CL 5 -P[(VC) 80 - co -(VPDMS) 20 ] in PVC matrix,
the specific wear rate of the composite was reduced to 5.1 ×
10 –5 mm 3 /Nm, about one-quarter of that
of rigid PVC. Uniaxial tensile tests and impact tests showed that
the addition of cross-linked microspheres had little effect on the
mechanical properties of PVC.
✓ 已验证
DOI
高影响因子
LANGMUIR
·
2026
·Vol. 42
·期 29
·21195-21206
·
IF 4.4
Liu Qixin,Zhu Manyu,Li Shanshan,Zhang Yuqi,Li Zihao,Wang Yiran,Wu Lie,Ishibashi Takaaki,Jiang Xiue
Accurately understanding the water structure around multiple
groups
and their synergistic effect at electrified interfaces has been challenging
due to the complexity of the interface. The interfacial chiral symmetry-breaking
effect leads to differences in the spatial distribution of functional
groups and the consequent water structure, thereby providing a possibility
for the accurate analysis of molecular group-associated water. On
the basis of this model and combined with surface-enhanced infrared
absorption spectroscopy and ab initio molecular dynamics simulation,
we have systematically investigated the precise water structure around
carboxyl and amino groups, including the influence of carboxyl groups
on tetrahedrally coordinated water, the effect of amino groups in
tightening the surrounding water organization, and their synergy in
directing the first-layer water toward the surface. The presence of
methyl groups can enhance the interaction between amino groups and
water due to their electron-donating function. Furthermore, we revealed
a ligand-induced enhancement in the hydrogen evolution reaction at
the single group level. Our research provides a new methodology for
obtaining comprehensive insights into the impact of each functional
group, how they synergize to regulate the water structure and proton
reduction in complex systems, and their contribution to proton-coupled
electron-transfer reactions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·Vol. 14
·期 31
·13859-13872
·
IF 7.6
Cao Yuanpeng,He Jingjing,Huang Liangchao,Tu Wenhui,Li Liqi,Huang Chenyi,Zhang Xinyu,Li Runlin,Zhang Yingjie,Dong Peng,Duan Jianguo
High-voltage lithium cobalt oxide (LiCoO 2 , LCO) offers high energy density for advanced electronics, but elevated cut-off voltages accelerate surface Co/O loss and structural degradation. Here, we report a scalable waste-to-value upcycling route that combines process-intensified regeneration with interfacial engineering to convert end-of-life LCO into a high-voltage-stable cathode. Mechanochemical leaching and continuous NH 4 HCO 3 -assisted co-precipitation produce a spherical Al-doped, Li-deficient precursor, which is regenerated by relithiation and calcination. Surface hydrolysis of tetrabutyl titanate followed by mild lithium-assisted annealing forms a conformal Li-Ti-O shell and a shallow Ti-enriched near-surface gradient. Multiscale characterization verifies the nanoscale coating and interfacial transition region, and first-principles calculations show that Ti lowers the surface energy of the LCO (104) facet, explaining the improved near-surface stability. The optimized material delivers 228.8 mAh g –1 at 0.2 C, 183.7 mAh g –1 at 5 C, and 85% capacity retention after 100 cycles at 1 C (3.0–4.6 V). This regeneration-to-interface-conversion strategy provides a practical route for greener, scalable rejuvenation of reclaimed LCO.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·Vol. 98
·期 32
·23507-23519
·
IF 7.3
Gao Yihuan,Liu Jing,Chen Siying,Yang Qiquan,Tang Jianru,Huang Shu,Zhu Xiaohua,Zhang Youyu,Liu Meiling
Precision diagnosis and molecular subtyping of arthritis
call for
analytical tools capable of providing objective, dynamic, and multiparametric
readouts of disease progression and severity. Current clinical assessments
mainly depend on symptom evaluation, imaging, and nonspecific biochemical
indicators, lacking highly specific biomarkers and suffering from
subjective interpretation and inconsistent multiparameter integration.
To address this challenge, we designed a dual-nanozyme activity sensor
array using metal-oxide-functionalized porphyrinic metal–organic
frameworks (MOFs) for simultaneous and parallel multibiomarker detection
and molecular classification of osteoarthritis (OA). Three types of
metal oxide@PCN-224 nanomaterials with distinct metal centers were
synthesized, and their peroxidase (POD)- and laccase (LAC)-mimicking
activities were systematically investigated. Leveraging their differential
dual-mimic activities, a multichannel sensing array for the simultaneous
and discriminative detection of key OA-related biomarkers including
C-reactive protein (CRP), hyaluronidase (HAase), matrix metalloproteinase-13
(MMP-13), tumor necrosis factor-alpha (TNF-α), interleukin-1beta
(IL-1β), and interleukin-17 (IL-17) was constructed. Each biomarker
interacts with the nanozymes to generate unique catalytic activity
modulation “fingerprints” due to the difference in the
nanozyme–biomarker interaction. Depending on their size, charge,
and functional groups, biomarkers may undergo adsorption on the surface
or alter the steric hindrance, local charge distribution, or interfacial
electron transfer, leading to either inhibition or promotion of the
activity of nanozymes. Integrated with pattern recognition algorithms,
this sensing array not only addresses the specificity shortfall of
single biomarker analysis but also achieves high-accuracy classification
of synovial fluid samples from clinically staged OA patients (mild
and serious). By integrating three materials with dual-enzyme activities,
the sensor array can generate more diverse and distinguishable “fingerprint”
signals, significantly improving classification accuracy and robustness.
By correlating clinical staging and multifactor molecular fingerprints,
this work offers an innovative integrated sensing strategy for the
objective diagnosis, dynamic monitoring, and precise management of
OA.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2026
·Vol. 9
·期 28
·13467-13476
·
IF 5.8
Dong Zihui,Chen Jiaxu,Tian Jiayi,Chen Biao,Liu Enzuo,Shi Chunsheng,Kang Jianli,Tang Ying,Qin Hongye,Ma Liying
In
recent years, the magnetic field utilization has emerged
as
an effective approach to enhance the oxygen evolution reaction (OER)
performance of catalysts through the magneto-thermal effect, magneto-hydrodynamic
effect, and spin-polarization effect. The OER process can be influenced
by controlling the spin state of intermediates in the spin-polarization
effect. Moreover, selenides with abundant d-electrons, high polarizabilities,
and metallicity properties render them highly suitable for the application
in OER. Medium-entropy compounds exhibit characteristics of outstanding
catalytic activity, structural stability, cocktail effect, etc. Herein,
due to the intrinsic correlation between the magnetic enhancement
effect and spin-dependent dynamics, the medium-entropy selenide FeCoNiVSe x nanosheet array catalyst exhibits a 317
mV overpotential and 40 h stability at 100 mA cm –2 current density in the presence of a 75 mT magnetic field. The spin-popularization
effect, whereby the magnetic field instigates a conversion of spin
states between the radical singlet and triplet states, can optimize
the reaction pathway, enhance the reaction efficiency, and exhibit
the persistent magnetic enhancement of FeCoNiVSe x . This work provides valuable insights into the mechanism of
understanding of magnetic field-assisted OER processes.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2026
·Vol. 74
·期 30
·23451-23460
·
IF 6.7
Huang Yuetong,Zhang Xinyan,Liu Qiyu,Ma Qiaozhi,Qiu Xueqing
Efficient
fractionation of lignocellulosic components
is a prerequisite
for full-component utilization. Conventional methods rely on harsh
conditions, causing severe degradation of cellulose and hemicellulose
and lignin condensation, while milder conditions compromise fractionation
efficiency. To balance native structure preservation and fractionation
efficiency, a biphasic system composed of lithium bromide molten salt
hydrate (MSH) and n -butanol was developed. At 110
° C for 1 h, cellulose and hemicellulose were selectively hydrolyzed
into oligosaccharides in the MSH phase with yields of 81.4% and 88.1%,
respectively. The isolated lignin retained 96.1% of β-O-4 ether
bonds (38.5/100 C9 units), and its catalytic hydrogenolysis delivered
a monophenol yield of 82.1% to the theoretical value. The light-colored
lignin (Δ E = 31.28) achieved SPF 28.2 as a
sole sunscreen active ingredient, demonstrating commercial potential.
This biphasic system enables highly selective fractionation of lignocellulosic
components with limited condensation, yielding key feedstocks for
bioenergy and biorefinery, including oligosaccharides and native structure-preserved
lignin.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·Vol. 98
·期 31
·22666-22673
·
IF 7.3
Wang Huan,Yang Dandan,Wang Qi,Hu Qingyu,Chen Qinsheng,Tang Huiru
Many phosphorylated analytes are present in complex mixtures
and
have diverse essential functions involving biology, chemistry, food,
and environmental sciences; their simultaneous quantification is vital
for efficiently revealing their crucial functions but remains challenging.
Here, we developed a high-coverage method for quantifying many phosphorylated
analytes in one run using ion-pairing reversed-phase ultrahigh-performance
liquid chromatography and tandem mass spectrometry. Good sensitivity
(limit-of-detection <0.95 pmol), linearity ( R 2 > 0.99), recoveries (80%–120%), precision (CV <
20%), and intertechnician consistency (CV < 20%) were demonstrated
for simultaneously quantifying 125 such analytes including nucleotides,
nucleotide sugars, phosphorylated amino acids and sugars, and the
enzyme-cofactors derived from vitamin B 1 (TMP, TPP, TTP),
B 2 (FMN, FAD), B 3 (NAD, NADP), B 5 (acyl-CoAs), and B 6 (PLP, PMP). The method applicability
was also confirmed by quantifying 43–78 phosphorylated metabolites
in five typical biological matrices including human urine, plasma,
cells, feces, and rabbit liver tissue, illustrating their significant
molecular phenotypic differences in the phosphometabolome. By quantifying
the phosphometabolomic differences using the method, we further revealed
some metabolic characteristics associated with the drug resistances
for human non-small cell lung cancer cells. This offers a reliable
method for the quantitative investigation of phosphorylated metabolites
and their functions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子