文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第793至804个,产品总数1,267个

设置提升方向
rGO
RSC Advances · 2018 ·Vol. 8 ·期 16 ·8607-8614 · IF 2.936

One-pot synthesis of CoFe2O4/rGO hybrid hydrogels with 3D networks for high capacity electrochemical energy storage devices

Lingxia Zheng,Lingtong Guan,Guang Yang,Sanming Chen,Huajun Zheng

CoFe2O4/reduced graphene oxide (CoFe2O4/rGO) hydrogel was synthesized in situ via a facile one-pot solvothermal approach. The three-dimensional (3D) network structure consists of well-dispersed CoFe2O4 nanoparticles on the surfaces of graphene sheets. As a binder-free electrode material for supercapacitors, the electrochemical properties of the CoFe2O4/rGO hybrid hydrogel can be easily adjusted by changing the concentration of the graphene oxide (GO) precursor solution. The results indicate that the hybrid material made using 3.5 mg mL−1 GO solution exhibits an outstanding specific capacitance of 356 F g−1 at 0.5 A g−1, 68% higher than the pure CoFe2O4 counterpart (111 F g−1 at 0.5 A g−1), owing to the large specific surface area and good electric conductivity. Additionally, an electrochemical energy storage device based on CoFe2O4/rGO and rGO was assembled, which exhibits a high energy density of 17.84 W h kg−1 at a power density of 650 W kg−1 and an excellent cycling stability with 87% capacitance retention at 5 A g−1 after 4000 cycles. This work takes one step further towards the development of 3D hybrid hydrogel supercapacitors and highlights their potential application in energy storage devices.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2018 · IF 5.116

A novel Pt/pyridine ionic liquid polyoxometalate/rGO tri-component hybrid and its enhanced activities for methanol electrooxidation

Hongli Shi,Ruiying Wang,Mengran Lou,Dianzeng Jia,Yong Guo,Xingchao Wang,Yudai Huang,Zhipeng Sun,Tao Wang,Luxiang Wang

A novel tri-component hybrid, Pt/pyridine ionic liquid polyoxometalate/reduced graphene oxide denoted as Pt/(epy) 3 PMo 12 O 40 /rGO with well-dispersed, smaller size Pt nanoparticles on rGO is successfully synthesized. The morphology, structure, composition and electrochemical property are characterized by high resolution transmission electron microscopy , X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive spectrometer, Raman spectra , thermogravimetric analysis and cyclic voltammetry , respectively. Ionic liquid polyoxometalate (epy) 3 PMo 12 O 40 availably prevents the aggregations of Pt nanoparticles on the rGO surface, furthermore, effectively improves anti CO poisoning performance and enhances the conductivity of the material. The mass activity of as-prepared Pt/(epy) 3 PMo 12 O 40 /rGO catalyst for methanol oxidation is about 10 times of 20% commercial platinum carbon, 7 times of Pt/rGO, 4 times of Pt/epyBr/rGO, and 2 times of Pt/H 3 PMo 12 O 40 /rGO. This further demonstrates that the ionic liquid polyoxometalate (epy) 3 PMo 12 O 40 play a very important role in enhancing the eletrocatalytic activity of the tri-component hybrid composite catalyst.

CAS / MDL: 18497-13-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH · 2018 ·Vol. 25 ·期 31 ·31358-31367 · IF 2.8

Fenton oxidation of municipal secondary effluent: comparison of Fe/Ce-RGO (reduced graphene oxide) and Fe2+ as catalysts

Wan Zhong,Wang Jianlong

The advanced treatment of municipal secondary effluent by heterogeneous and homogeneous Fenton processes using Fe/Ce-RGO (reduced graphene oxide) and Fe 2+ as catalysts was studied and compared. Sulfamethazine (SMT) was spiked in the effluent to examine the effectiveness of the emerging contaminant removal. The Fe/Ce-RGO catalyst was characterized using a scanning electron microscope (SEM) and cycle voltammetry curves. The removal of dissolved organic carbon (DOC), soluble chemical oxygen demand (SCOD), SMT, and ultraviolet-visible spectroscopy in 254 nm (UV 254 ) of municipal secondary effluents was examined. The DOC removal efficiency of secondary effluent (without addition of SMT) was 36.30% and 11.74% using Fe/Ce-RGO and Fe 2+ as catalysts, respectively. The removal efficiency of DOC, SCOD, and SMT in heterogeneous Fenton process was higher than that in homogeneous Fenton process. The changes of three-dimensional excitation-emission matrix (3DEEM) fluorescence, soluble microbial products (SMPs), humic acids, and UV 254 were determined, and the results indicated that UV 254, aromatic proteins, and humic acids decreased rapidly in both processes; however, polysaccharides and protein-like substances were difficult to degrade. Although some toxic substances produced after Fenton-like treatment, the biodegradability of the treated effluent was enhanced.

CAS / MDL: 57-68-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2018 · IF 6.14

MOF-Derived NiO/NiCo2O4 and NiO/NiCo2O4-rGO as Highly Efficient and Stable Electrocatalysts for Oxygen Evolution Reaction

Yanying Wang,Zhaoyi Zhang,Xin Liu,Fang Ding,Ping Zou,Xianxiang Wang,Qingbiao Zhao,Hanbing Rao

We developed a hydrothermal synthesis and high temperature calcination method to synthesize the metal–organic framework (MOF)-derived NiCo2O4/NiO and NiCo2O4/NiO-rGO. These composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Brunner–Emmet–Teller measurements. This work combines excellent catalytic efficiency of the transition metal with large specific surface area and large number of pores of the MOF. Consequently, catalysts for oxygen evolution with high efficiency and low cost were obtained. Both materials show lower overpotential at 430 and 350 mV, respectively, under 10 mA·cm–2. The Tafel slopes are 49 and 66 mV·dec–1, respectively, with very small performance attenuation for long-term catalytic reaction. Therefore, the catalysts reported herein possess great potential for application in oxygen evolution reaction.

CAS / MDL: 10026-22-9 13478-00-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2018 · IF 5.116

Co2SiO4/SiO2/RGO nanosheets: Boosting the lithium storage capability of tetravalent Si by using highly-dispersed Co element

Yiming Zhao,Lihua Zheng,Hao Wu,Huan Chen,Liwei Su,Lianbang Wang,Yuanhao Wang,Manman Ren

Tetravalent Si materials (SiO 2 and transition metal silicates) are receiving tremendous attentions for lithium storage, whereas a troublesome problem is how to improve the content of active Si. This work reports a novel method to boost their lithium storage capabilities by using highly-dispersed Co element in the form of nanofilm-like Co 2 SiO 4 /SiO 2 powder on the surface of reduced graphene oxide (RGO) that promotes the electronic diffusion and accommodates the volume changes. As a result, the Co 2 SiO 4 /SiO 2 /RGO exhibits over 20 times higher reversible capacity and better rate performance than the SiO 2 /RGO counterpart. In comparison, the Co 2 SiO 4 /SiO 2 /RGO shows the highest reversible capacity (1382 mAh g −1 at 500 mA g −1 ) and longest life span (500 cycles) in all known silicates-based materials and higher power/energy density than both of commercial graphite and Li 4 Ti 5 O 12 materials. Ex-situ X-ray photoelectron spectra and electrochemical tests at different voltage windows are conducted to illustrate the reason for the significantly improved performances. It demonstrates that tetravalent Si is gradually activated to lower-valence form by highly-dispersed Co generated with cycling. This observation provides new evidence for the electrochemical catalytic mechanism in transition metal silicates for lithium storage.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2019 ·Vol. 30 ·期 15 ·14007-14021 · IF 2.195

Preparation of PVDF-TrFE based electrospun nanofibers decorated with PEDOT-CNT/rGO composites for piezo-electric pressure sensor

Ahmed Arsalan,Jia Yunming,Huang Yi,Khoso Nazakat Ali,Deb Hridam,Fan Qinguo,Shao Jianzhong

We developed a high-performance electrically conductive and transparent PVDF-TrFE based electrode for piezoelectric pressures sensor using the electrospinning technique. The electrode was produced by depositing the reduced graphene oxide (rGO), multiwall carbon nanotubes (rGO-MCNTs) via spray coating. Various concentration of rGO and MCNTs were used and optimized for improved electrical performance of the resultant electrode. The deposition of poly (3,4-ethylenedioxythiophene) (PEDOT) was successfully achieved by using vapor phase polymerization (VPP). The morphological characteristics of the as-prepared hybrid composite nanofiber mats were analyzed by using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transforms infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray diffraction (X-RD), and UV–visible spectroscopy. The electrical performance of the fabricated composite nanofibers was measured by using a four-point probe device. The results showed significant enhancement in electrical conductivity of the hybrid nanocomposite which increased up to 3916 S cm −1 and sensitivity of the developed pressure sensor was achieved 67.4 kPa −1 . This work suggests that the hybrid nanocomposite can be used for the transparent electrodes in a piezoelectric pressure sensor.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
TALANTA · 2017 · IF 4.162

A sensitive SPR biosensor based on hollow gold nanospheres and improved sandwich assay with PDA-Ag@Fe3O4/rGO

Shuo Li,Qiong Wu,Pinyi Ma,Yue Zhang,Daqian Song,Xinghua Wang,Ying Sun

A novel surface plasmon resonance (SPR) biosensor based on hollow gold nanospheres (HGNPs) and an improved sandwich assay was developed to detect rabbit IgG. The electromagnetic coupling between the HGNPs and Au film, and the notable plasmonic fields spread over the inner and outer surfaces of HGNPs, led to the considerable amplification of the SPR signal. [email protected] 3 O 4 /reduced graphene oxide ( [email protected] 3 O 4 /rGO) was introduced to bind detection antibody (Ab 2 ) to form the improved sandwich structure. Ag nanoparticles were excited to produce SPR and their hot electrons were doped on graphene thin films, which amplified the response of biomolecules. Magnetic nanoparticles (Fe 3 O 4 ) simplified the collection of Ab 2 [email protected] 3 O 4 /rGO. An external layer of polydopamine (PDA) permitted the efficient immobilization of Ab 2 without activation via abundant functional groups and protected the nanoparticles from etching or agglomeration. In addition, because of its large mass, Ab 2 [email protected] 3 O 4 /rGO also played a key role in the further amplification of the SPR response signals. This novel SPR biosensor exhibited an effective response to the rabbit IgG at the different concentrations ranging from 0.019 to 40.00   μg   mL −1 . This value is 132 times lower than that observed for a traditional SPR biosensor based on Au-3-mercaptopropionic acid and 8 times lower than that obtained from an Ab 2 sandwich assay, which indicates that the SPR sensor has high sensitivity. In addition, the designed biosensor showed satisfactory recoveries to detect the rabbit IgG spiked in serum samples. Therefore, the novel SPR biosensor with high sensitivity and acceptable recovery has potential for practical applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
BIOELECTROCHEMISTRY · 2024 · IF 4.8

Competitive electrochemical aptasensor for high sensitivity detection of liver cancer marker GP73 based on rGO-Fc-PANi nanocomposites

Guiyin Li,Bo Wang,Shengnan Li,Xinhao Li,Ruijie Yan,Xiaohong Tan,Jintao Liang,Zhide Zhou

Golgi protein 73 (GP73) is a novel tumor marker in the early diagnosis and prognosis of hepatocellular carcinoma (HCC). Herein, a competitive electrochemical aptasensor for detecting GP73 was constructed using reduced graphene oxide-ferrocene-polyaniline nanocomposite (rGO-Fc-PANi) as the biosensing platform. The rGO-Fc-PANi had larger specific surface area, excellent conductivity and outstanding electroactive performance, which served as nanocarrier for GP73 aptamer (GP73 Apt ) binding and as redox nanoprobe for record electrical signal. Then, a complementary chain (cDNA) was fixed to the electrode by hybridization with GP73 Apt . When GP73 was present, a competitive process happened among cDNA, GP73 Apt and GP73, formed the GP73-GP73 Apt stable chemical structure and made cDNA detach from the sensing electrode, resulting in enhancement of electrical signal. The difference in the corresponding peak current before and after the competition can be used to indicate the quantitative of GP73. Under optimal conditions, the DPV current response showed a good log-linear relationship with GP73 concentrations (0.001 ∼ 100.0 ng/mL) with a detection limit of 0.15 pg/mL (S/N = 3). It was successfully used for GP73 detection in human serum with RSDs ranging from 1.08 % to 6.96 %. Therefore, the aptasensor could provide an innovative technology platform and hold a great potential in clinical application.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2024 · IF 8.3

Constructing Adsorption Site-Enhanced Vo-BiOCl/rGO Heterostructures for Efficient Response to NO2/NH3 Gases at Room Temperature

Xinmiao Nie,Xue Zhong,Fan Yang,Rongguo Wang,Xiaodong He,Wenbo Liu

Real-time detection of harmful gases at room temperature has become a serious problem in public health and environmental monitoring. Two-dimensional materials with semiconductor properties BiOCl is a promising gas-sensitive material due to its large specific surface area and adjustable band gap as well as outstanding safety characteristics. However, limited by the weak gas adsorption sites and sluggish charge-transfer ability, the performance of BiOCl could not be fully exploited. Oxygen vacancy (Vo) engineering can introduce lattice defects, thereby significantly increasing the local charge density and enhancing the adsorption of gases, which is an effective strategy to enhance the gas-sensing performance. In this work, we composite BiOCl with a vacancy (Vo-BiOCl) and reduced graphene oxide (rGO) to construct a Vo-BiOCl/rGO heterostructure with enhanced gas adsorption sites. Experimental and theoretical calculations show that Vo can enhance the adsorption of gases and the introduction of rGO forms a high-quality heterostructure with BiOCl, which can effectively reduce the band gap of BiOCl and promote electron transfer, thereby improving the sensitivity of the sensor. Benefiting from above, Vo-BiOCl/rGO achieves the ability to detect low concentrations of NO2/NH3 at room temperature, with high sensitivity (55% at 1 ppm of NO2 and −28% at 1 ppm of NH3), fast response time (40 s at 1 ppm of NO2 and 2 s at 1 ppm of NH3), good stability (over 150 days), and fully recoverable gas sensitivity.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FUEL · 2024 · IF 6.7

Bimetallic Cu-Co catalyst derived from in-situ grown CuCoAl-LDHs on rGO for alcohols synthesis from syngas

Shiyi Wang,Mingsheng Luo,Zhi Yang,Ziyang Zhang,Wenshuai Yang,Ziyuan Li,Xiaoteng Cui,Lingman Xia,Changke Shao

Using a citrate-assisted liquid phase co-precipitation method, a CuCoAl-LDH composite nanomaterial was successfully synthesized in situ on rGO and applied to alcohol synthesis for the first time. Structural characterization and morphological observations indicate that the hybrid material consists of hexagonal LDH nanosheets that are vertically aligned, crossed and densely distributed on the rGO surface. The graphene support significantly promoted the dispersion of LDH and prevented strong interlayer stacking during LDH crystal growth. After optimization of the Co/Cu ratio, the Cu 2 Co 1 /Al 2 O 3 /rGO catalyst exhibited a total alcohol selectivity of 60 %, of which 82 % were C 2+ alcohols, and no deactivation was observed after 100 h of reaction. The addition of the graphene support significantly reduced the particle size of the Cu-Co alloy on the catalyst surface, and the particles were highly dispersed on both the Al 2 O 3 matrix and the rGO surface. This dispersion facilitated strong interactions between the Cu-Co alloy particles, while the high thermal conductivity of graphene effectively suppressed the formation of hotspots. In addition, the well-ordered three-dimensional nanosheet structure of the LDH precursor provides a large specific surface area and highly uniformly dispersed active centers. This structure not only promotes the formation of bridge adsorption sites with high CO dissociation ability, which balances multiple bonding and bridge CO adsorption, but also significantly increases the probability of CO insertion, thereby enhancing the performance of HAS. This study provides an effective method for the preparation of LDH/rGO composites, demonstrating their broad potential application prospects.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES PART B-ENGINEERING · 2024 · IF 12.7

Bioinspired, highly sensitive interlocked flexible textile pressure sensor based on multilayer SWCNTs/PVP/rGO dendritic for gesture recognition

Yong-song Tan,Weiyi Han,You Wu,Dajiang Kuang,Liyang Song,Chaoxia Wang

The development of wearable gesture recognition systems, capable of converting intricate human gestures into electric signals and graphical representations , poses significant challenges for future advancements in health monitoring and human-machine interfaces. In response to this demand, we present an approach centered on a cell-inspired, multiscale hierarchical structural piezoresistive pressure sensor designed for gesture recognition applications. The breathable, hierarchically interlocked textile pressure sensor (PFPA), featuring a SWCNTs/polyvinylpyrrolidone (PVP)/reduced graphene oxide (rGO) dendritic structure combined with a PANI/PVA cylindrical array, exhibits remarkable properties. The dendritic electrodes, composed of SWCNTs and PVP in a 1:2 ratio, maintain optimal regularity. Meanwhile, the cylindrical PANI/PVA array is meticulously engineered with a radius of 200 μm, a height of 200 μm, and an inter-cylindrical spacing of 150 μm. The PFPA demonstrates an unprecedented ultrahigh sensitivity of 80.8 kPa −1 across a pressure range of 0–5 kPa, coupled with a rapid response time of 150 ms and minimal hysteresis of 16.1 %. The PFPA also demonstrates outstanding repeatability, with no significant performance degradation observed after 4000 cycles. By correlating the bending angles of finger joints with resistance changes, we successfully integrated these sensors into a glove, enabling precise gesture recognition. The multilayer SWCNTs/PVP/rGO dendritic and PANI/PVA cylindrical array pressure sensor exhibits superior sensing performance and accurate posture capture. This demonstrates its significant potential for applications in wearable electronics and intelligent devices, marking a substantial advancement in the field.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2024 · IF 4.9

A GOX/RGO-CS-Fc/AuNPs nanosensing membrane in a light-addressable potentiometric biosensor for glucose specific detection

Jintao Liang,Qing Huang,Liang Wu,Xiaohang Shi,Kaiteng Yan,Fei Guo,Zhide Zhou,Guiyin Li

Glucose (Glu) is an important source of energy and metabolic intermediate for animal and plant cells. In this study, a high-performance biosensor for specific detection of Glu was constructed by combining a light-addressable potentiometric biosensor (LAPS) and a specific sensitive unit. The specific sensitive unit was adopted a silicon-based capacitive structure, and the glucose oxidase/reduced graphene oxide -chitosan-ferrooxidase/gold nanoparticles (GOX/RGO-CS-Fc/AuNPs) was modified onto the silicon-based working electrode to construct an nanosensing membrane. The interaction between the specific sensitive unit and Glu resulted in the formation of a bilayer potential, and the field effect generated by the bilayer potential caused a change in the capacitance of the silicon structure, which resulted in a change in the photocurrent-voltage characteristics of the LAPS. Through the potential shift in the photocurrent-voltage characteristics, the LAPS was capable of detection the concentration of Glu. Under optimal conditions, the potential shift was linearly correlated with the Glu concentration from 0.01 mg/mL to 4.00 mg/mL with R 2 of 0.9821, and the limited detection was 0.001 mg/mL. In addition, the LAPS showed good recovery (97.92 %–105.72 %), admirable specificity and stability in detection Glu in human serum samples.

CAS / MDL: 9012-76-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。