JOURNAL OF APPLIED POLYMER SCIENCE
·
2024
·Vol. 141
·期 47
·e56255
·
IF 2.7
Jin Yang,Yixuan Hou,Yingzheng Hong,Yingbang Yao
Since thermally conductive fillers easily aggregate when introduced into polymer matrix, it is essential to apply a modifier to enhance the dispersion of the filler. In current study, the surface of boron nitride (h-BN) is firstly modified by employing a double modification process and then added into sulfonated polyetheretherketone (SPEEK) to form the composite materials. Four different kinds of samples of double-modified h-BN were obtained. Ultimately, the XXX@h-BN/SPEEK (XXX denoted as modifier, i.e. PDA, VTMS, TEOS, and APS) flexible film with the horizontally oriented XXX@h-BN was produced by heating the mixture under an external electric field. The test results indicate that the thermally conductive filler PDA@h-BN (PDA: polydopamine), which was prepared by modifying OH@h-BN with PDA, loaded into SPEEK, and electrically oriented, shows the best overall performances. With a high tensile strength of 43.24 MPa and good flexibility, PDA@h-BN/SPEEK flexible film exhibits an in-plane thermal conductivity of 2.3 Wm −1 K −1 at a filling ratio of 10 wt%. The sample may be bent at a steep angle without breaking down and can recover to original shape bearing its high degree of flexibility.
研究领域:
材料科学
·
聚合物工程
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2025
·
IF 6.6
Zhijun Liu,Junxiang Lu,Meng Xu,Shaochun Li,Anjie Zhou,Yongjuan Geng,Sai Zhang
This study presents the development of h-BN/PDMS composite coatings through hydroxylation treatment and modification of hexagonal boron nitride (h-BN) using a vinyl silane coupling agent. The study aims to address the limitations of conventional PDMS coatings, specifically their inadequate mechanical strength and poor resistance to weathering. The innovation lies in the improved dispersion of h-BN within the PDMS matrix, which was achieved via the surface grafting of vinyl groups. This approach, combined with the intrinsic layered structure and high thermal conductivity of h-BN, led to a synergistic enhancement in the mechanical performance and protective functionality of the coating. Experimental results demonstrated that incorporating 8% modified h-BN increased the tensile strength of the coating to 5.206 MPa, an improvement of 110.6% over pure PDMS, and reduced erosion depth to 2.7 μm. Furthermore, the coating exhibited minimal adhesive strength loss after UV aging (from 1.085 to 1.012 MPa). Under acidic conditions (pH = 2), the composite coating reduced the mortar strength loss by 53.1%. In seawater immersion and 25 freeze-thaw cycles, the mass loss rates of the test blocks decreased by 55.9% and 90.4%, respectively. In addition, the high UV reflectance (97.6%) and oxygen barrier properties of h-BN significantly mitigated the photo-oxidative degradation of the PDMS matrix. This study proposes a theoretical foundation and process optimization strategy for designing high-performance protective coatings suitable for use on concrete and electronic components in extreme environments.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Peng Chu,Lindong Ma,Hongli Liu,Zongwei Zhang,Yuhao Liu,Weiqiang Xie,Wenshuo Cao,Mingwei Li,Yuanhang Zhou
Aluminum borate fibers are promising candidates for high-temperature thermal insulation owing to their excellent thermal stability, good chemical resistance, and relatively low density. Herein, we report a simple method for preparing porous Al 18 B 4 O 33 /h-BN composite fibers via electrospinning and stepwise heat treatment, using an aluminum isopropoxide/aluminum nitrate (AIP-AN) complex as the aluminum source and nanoscale h-BN as the boron source. The incorporation of h-BN not only promotes the in-situ formation of the Al 18 B 4 O 33 phase but also affects the fiber's pore structure. Meanwhile, the heterogeneous interface formed between h-BN and the Al 18 B 4 O 33 may introduce additional interfacial thermal resistance, thereby synergistically reducing thermal conductivity and improving thermal insulation performance. The resulting composite fibers exhibited a highly porous structure, with a high specific surface area of 53.9175 m 2 g −1 , a low density of 0.025 g cm −3 , and a low thermal conductivity of 0.0417 W m −1 K −1 . The porous Al 18 B 4 O 33 /h-BN composite fibers demonstrate significant potential for thermal insulation in extreme environments, offering a viable approach to developing high-performance ceramic fiber insulation materials.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER
·
2026
·
IF 5.1
Han Wu,Yingying Zhou,Liuchao Zhang,Jinlei Wu,Chenxi Wang,Xiaoyan Li,Rong Ma,Chaoqun Yang,Donghai Ding,Yuchang Qing,Hui Xie
Sequential electrospinning creates spatially separated MWCNT/h-BN bilayers. • M-B-30 delivers an RL min of −34.26 dB and an EAB max of 4.48 GHz. • M-B-30 reaches 91.52% solar reflectance and emissivity up to 0.979. • Outdoor cooling lowers M-B-30 to 16.45 °C below ambient temperature. • Bilayer design balances impedance matching, dielectric loss, and radiative cooling. Integrating passive radiative cooling with microwave absorption in a single membrane remains challenging because conductive carbon-based absorbers generally exhibit strong solar heating, whereas highly reflective components alter the dielectric response and disrupt the impedance-matching balance required for efficient microwave attenuation. Here, bilayer MWCNTs/h-BN nanofibrous composite membranes were fabricated by sequential electrospinning. The h-BN-containing polyacrylonitrile (PAN) upper layer was designed to enhance solar reflection and mid-infrared emission while moderating the impedance transition from free space to the lossy MWCNTs/PAN lower layer. By adjusting the h-BN content, the optical and electromagnetic responses of the bilayer membranes were effectively coordinated. The optimized M-B-30 membrane achieved a minimum reflection loss of −34.26 dB at 1.5 mm and a maximum effective absorption bandwidth of 4.48 GHz at 1.9 mm. It also exhibited a solar reflectance of 91.52% and an emissivity of up to 0.979 within the 8–13 μm atmospheric window, resulting in a maximum sub-ambient temperature reduction of 16.45 °C during outdoor testing. The microwave absorption was attributed to the balance among layered impedance matching, conductive dissipation, polarization relaxation, and multiple scattering, whereas the radiative-cooling performance resulted from enhanced solar scattering and efficient mid-infrared thermal emission. This spatially separated bilayer design provides an effective route for integrating microwave attenuation and passive thermal regulation in multifunctional composite membranes. Download: Download high-res image (589KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Song Wu,Yongfeng Xia,Ming Zhu,Jun Zhao,Dongxu Yao,Yu-Ping Zeng
Machinable Si 3 N 4 ceramics containing 10 vol% h-BN and crystalline ytterbium silicate secondary phases were prepared. • Heat treatment promoted the crystallization of ytterbium-containing secondary phases into ytterbium silicates. • Crystallization was accompanied by the development of compressive residual stress. • 10 vol% h-BN with crystalline ytterbium silicate phases achieved drilling performance comparable to conventional 20 vol% h-BN. Traditionally, the machinability of Si 3 N 4 ceramics has mainly been improved by introducing individual weak-interface phases, while the role of grain-boundary phases was often neglected. In this study, Si 3 N 4 ceramics were fabricated by hot-press sintering with heat treatment using Yb 2 O 3 and SiO 2 as sintering additives. The crystalline ytterbium silicate secondary phases formed in situ during heat treatment, together with the addition of a small amount of h-BN, introduced weak-interface-forming regions into the Si 3 N 4 microstructure and contributed to improved machinability. The effects of sintering additive ratio, h-BN content, and heat-treatment temperature on mechanical and machinable properties were systematically investigated. The results demonstrated that Si 3 N 4 ceramics containing only 10 vol% h-BN could be readily machined using conventional cemented carbide drills while maintaining high strength, with a bending strength of 660 MPa, fracture toughness of 6.9 MPa·m 1/2 , Young’s modulus of 263 GPa, and Vicker’s hardness of 9.3 GPa (under 10 N).
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2025
·
IF 3.9
Yanan Huang,Wenjing Xie,Jia Li,Jixing Liu,Hao Chen
Oxidative desulfurization (ODS) is one of the most promising processes for producing clean fuels to meet the requirements for the clean use of fossil fuels. In this study, a MoS2/h-BN heterojunction was synthesized using the chemical vapor deposition method, leading to a modified electronic structure at the surface. X-ray photoelectron spectroscopy, electron paramagnetic resonance, and electrochemical impedance spectroscopy suggested the occurrence of interfacial electronic reorganization and enhanced charge transfer efficiency due to the formation of a well-defined heterojunction. Hydrogenation temperature-programmed reduction revealed a strong interaction between h-BN and MoS2, which contributed to the highly efficient performance of the heterojunction for ODS applications. As a result, although h-BN showed very low ODS activity, its catalytic activity was enhanced so much and even comparable to that of pure MoS2 after loading with only 1.7 wt % MoS2 on h-BN to construct MoS2/h-BN heterojunctions.
研究领域:
材料科学
·
催化化学
·
能源化学
·
纳米材料
·
表面科学
·
环境化学
✓ 已验证
产品关联
DOI
高影响因子
Nano-Micro Letters
·
2022
·Vol. 14
·期 1
·1-12
·
IF 23.655
Yang Peng,Zha Jiajia,Gao Guoyun,Zheng Long,Huang Haoxin,Xia Yunpeng,Xu Songcen,Xiong Tengfei,Zhang Zhuomin,Yang Zhengbao,Chen Ye,Ki Dong-Keun,Liou Juin J.,Liao Wugang,Tan Chaoliang
The growth of high-quality single-crystalline Te nanobelts is reported by introducing atomically flat hexagonal boron nitride (h-BN) nanoflakes into the chemical vapor deposition system as the growth substrate.
The field-effect transistor based on Te grown on h-BN exhibits an ultrahigh hole mobility up to 1370 cm 2 V −1 s −1 at room temperature.
研究领域:
材料科学
·
电子工程
✓ 已验证
DOI
高影响因子
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
·
2018
·Vol. 18
·期 5
·3291-3298
·
IF 1.354
Yang Xi,Yu Xiaoyan,Naito Kimiyoshi,Ding Huili,Qu Xiongwei,Zhang Qingxin
A new thermally conductive and electrically insulative polyimide were prepared by filling different amounts of hexagonal boron nitride (h-BN) particles, and the thermal conductivity of Polyimide (PI) composites were improved with the increasing h-BN content. Based on this,
two methods were applied to improve thermal conductivity furtherly at limited filler loading in this paper. One is modifying the h-BN to improve interface interaction, another is fabricating a nano-micro hybrid filler with 2-D h-BN and 0-D nano-scale nanodiamond (ND) to build
more effective conductive network. Both surface modification and hybrid system have a positive effect on thermal conductivity. The composites introducing 40 wt% hybrid filler (the weight ratio of ND/modified BN was 1/10) showed the highest thermal conductivity, being up to 0.98 W/(m K) (5.2
times that of PI). In addition, the composites exhibits excellent electrical insulation, thermal stability properties etc.
研究领域:
材料科学
·
聚合物复合材料
·
热管理材料
✓ 已验证
DOI
高影响因子
COMPOSITES COMMUNICATIONS
·
2026
·
IF 7.7
Yujie Yang,Huixing Lin,Jiaqi Li,Yang Gao,Xiaogang Yao,Haiyi Peng
Efficient thermal management is a critical challenge for next-generation electronics, where conventional polymer-based materials suffer from inherently low thermal conductivity. Inspired by natural honeycomb structures, we developed a freeze-casting strategy to fabricate high-performance hexagonal boron nitride (h-BN)/polysilylaryl-enyne (PSAE) composites exhibiting enhanced thermal conductivity. By leveraging the unidirectional crystallization of tert-butyl alcohol (TBA), a highly ordered h-BN honeycomb scaffold was constructed, facilitating the formation of efficient phonon conduction pathways. The composites, with a low h-BN (10 μm) ratio of 23 vol%, exhibit an outstanding omni-directional thermal conductivity of 4.71 W/(m·K) along the z-axis and 3.44 W/(m·K) along the x-axis, significantly outperforming conventional polymer composites. Moreover, dielectric characterization confirms that the honeycomb structure enhances anisotropic dielectric behavior ( ε rz = 3.68, ε rx = 3.32, for h-BN (10 μm) at 23 vol%). The proposed bioinspired approach presents a scalable and effective route for developing lightweight, thermally conductive composites for advanced electronic applications.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2022
·
IF 4.778
Yuhong Nong,Licai Fu,Jiajun Zhu,Wulin Yang,Deyi Li,Lingping Zhou
To meet the criteria of high specific power thermal battery development, all-lithium molten salt electrolytes (LiF–LiCl–LiBr) are often employed in thermal batteries. In this work, a hexagonal boron nitride binding molten salt electrolyte (h-BN-E) was synthesized using a straightforward liquid nitrogen mixing process and high temperature calcination , which using h-BN as a binder in electrolyte. The h-BN-E has a low internal resistance (0.21 Ω) and a high discharge voltage (2.5 V), which is close to the theoretical discharge voltage (2.64 V). The h-BN-E with high specific capacity (329 mAhg −1 ) and specific energy (700 W h kg −1 ) at the same time. It can be demonstrated that h-BN has the capacity to more effectively immobilize the electrolytes at high temperature discharge when combined with the discharge overflow diagram. The investigation of h-BN as a binder for thermal batteries with low internal resistance can be started with the help of this work.
研究领域:
储能技术
·
材料科学
·
电化学
·
热电池
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Jia Wang,Zeru Wang,Chuanyao Dong,Kan Zhang
Titanium alloys are widely used in lightweight mechanical components, but their limited mechanical and tribological properties often lead to failure under service conditions. In this study, a titanium-based micro-arc oxidation (Ti-MAO) composite coating was developed by incorporating hexagonal boron nitride (h-BN) while optimizing electrolyte composition and process parameters. Proper control of h-BN content effectively improved the high-temperature oxidation resistance and tribological properties of the Ti-MAO coating. The research results showed that h-BN could regulate the energy distribution during MAO discharge, promote coating densification, and reduce structural defects. At a concentration of 4 g/L, h-BN maintained good dispersibility. Compared with an additive-free Ti-MAO coating, the h-BN/Ti-MAO composite coating showed an 86% reduction in the oxidation rate constant at 600 °C. Due to the stable layered structure of h-BN over a wide temperature range, the composite coating maintained a friction coefficient (COF) below 0.31 from room temperature (RT) to 500 °C, reduced to below 0.21 within 300 °C. However, excessive h-BN led to particle aggregation and a decline in overall coating performance. In summary, this approach enhances the durability of titanium alloy components through improved oxidation resistance and tribological properties.
✓ 已验证
DOI
高影响因子
ChemCatChem
·
2021
·Vol. 13
·期 14
·3312-3318
·
IF 5.686
Ding Ding,Bing Yan,Yang Wang,An-Hui Lu
Graphical Nanofiber Catalysis : Hexagonal boron nitride has been regarded as a potential inorganic nonmetallic catalyst for the oxidative dehydrogenation of propane. Herein, a novel nanofiber catalyst consisting of hexagonal boron nitride/silica oxide ( h -BN/SiO 2 ) was prepared via electrospinning method, which exhibited remarkable 24.9 g olefins ⋅ g BN −1 ⋅ h −1 productivity of olefins in oxidative dehydrogenation of propane. Fibrous nanomaterials have drawn considerable attention in the field of catalysis due to the promoted utilization of the surface and facilitated mass transfer process. In this study, we prepared one-dimensional nanofiber catalysts consisting of hexagonal boron nitride/silica oxide ( h -BN/SiO 2 ) via electrospinning method. The key is to prepare uniform sols consisting of exfoliated h -BN. The diameters of the nanofiber catalysts can be tuned in the range of 150–300 nm through h -BN loading change. When used in oxidative dehydrogenation of propane (ODHP), the obtained nanofibrous catalysts exhibited a 12.4 % conversion of propane and 85.1 % selectivity towards propylene, with remarkable olefins productivity of 24.9 g olefins ⋅ g BN −1 ⋅ h −1 , which is more than 5 times higher than that of bulk ODHP catalysts reported to date. This study shines light on the specific one-dimensional fibrous structure containing dispersed h -BN as well as a new strategy of preparing more efficient boron-based catalysts in the ODHP process.
研究领域:
催化材料
·
能源化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）