BIOELECTROCHEMISTRY
·
2022
·
IF 5.76
Wenjing Lai,Jiajia Li,Mingzhe Jiang,Chaoyun Ma,Chulei Zhao,Min Wang,Pengli Li,Shijie Yan,Yu Qi,Chenglin Hong
In electrochemical immunoassays, great breakthroughs have been made in ultrasensitive detection of tumor markers by amplifying signals with coreaction accelerators. Herein, carbon nitrides with nitrogen vacancies (CNNVs) are proposed as emitter, due to the introduction of nitrogen vacancies this emitter has better ECL efficiency, the phenomena of interface electron transfer and electrode passivation are improved. At the same time, it can also promote the electrochemical reduction of coreactant, making it an attractive and potential emitter. The electrode was modified with Ag-Ti 3 C 2 MXene. It not only accelerates electron transfer and increases the effective working area of the electrode, but also acts as a coreaction accelerator to promote the electrochemical reduction of the coreactant K 2 S 2 O 8 , resulting in a strong ECL signal. The immunosensor showed a good linear relationship in the range of 10 −5 -100 ng/mL with a detection limit of 0.36 fg/mL. In addition, the excellent properties of good specificity and ultra-high stability provide an effective method for ultra-sensitive immunoassays.
研究领域:
生物分析化学
·
肿瘤学
·
免疫学
·
纳米生物技术
·
分子诊断
·
转化医学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Haisheng Chen,Wenwen Chen,Jiaying Shen,Xiaona Du,Tianhong Zhou,Zhengang Dong,Taiyu Bian,Jiaxing Guo,Yiyang Wen,Yuanlin Liang,Zhenping Wu,Yang Zhang
Developing smart luminescent materials with desirable and tunable characteristics has always been an overriding priority of fluorescence technology. However, huge challenges encompass the single functionality of the luminescent materials and the traditional chemical synthetic techniques with rigorously controlling over the miscellaneous experimental conditions and variables. Herein, the lanthanide-doped bismuth-layered ferroelectric (Na 0.5 Bi 0.5 ) 0.96 Er 0.04 Bi 2 Nb 2 O 9.02 has been prepared to be utilized as a platform that not only serves the in-situ and reversible tailoring of the upconverted emission via physical methods, but also enable the versatile functionalities such as photomemory and multi-modal temperature sensing. High luminescent contrast that can reach up to 83.7 % before and after the 405 nm irradiation has been realized on the basis of the photochromic phenomenon of the as-prepared (Na 0.5 Bi 0.5 ) 0.96 Er 0.04 Bi 2 Nb 2 O 9.02 sample, and the fundamental application in the photomemory has been exhibited. Moreover, the performances of triple-mode thermometry built on the fluorescent intensity ratio techniques ( 2 H 11/2 / 4 S 3/2 and 4 S 3/2 / 4 F 9/2 ) as well as the lifetime of the 4 S 3/2 excited state of the Er 3+ ion have been investigated in carefulness, with the maximal relative sensitivities of 1.22 % K −1 at 300 K, 0.92 % K −1 at 510 K, and 0.18 % K −1 at 450 K, respectively. Our results provide significant insights into the methodology of physically modulating the upconversion luminescence, and offer a glamorous pathway for multifunctional high-end applications.
研究领域:
材料科学
·
光学工程
·
功能材料
·
纳米光子学
·
传感技术
·
固态物理
·
智能材料
✓ 已验证
DOI
高影响因子
Nanoscale
·
2019
·Vol. 11
·期 36
·16907-16918
·
IF 6.97
Hong Lin,Jian Mao,Minchao Qin,Zhilong Song,Wanjian Yin,Xinhui Lu,Wallace C. H. Choy
While red is one of the primary colors for display applications, the investigation of visible red emitting perovskites, particularly 2D perovskites, is relatively limited. In this work, we demonstrate a single-phase Ruddlesden–Popper quasi-2D (C3H7NH3)2CsPb2I7 perovskite for red color LEDs. Through increasing the annealing temperature of (C3H7NH3)2CsPb2I7 perovskite thin films, we have successfully achieved tunable emission wavelengths from 654 to 691 nm. Equally important, for all the quasi-2D perovskite LEDs, once the annealing temperature is fixed, the emission spectrum is independent of bias voltages, which is very important for their use in lighting and displays. With the analysis of the crystallinity, morphology, and thermodynamic stability of the quasi-2D perovskite, we find that the obtained (C3H7NH3)2CsPb2I7 perovskite is a single-phase quasi-2D perovskite with only n = 2 phase. Besides, we found that the red shifting of emission wavelength is caused by the increase of perovskite crystal size while increasing the annealing temperature. Our results also show that the temperature-induced color tunability can be applied to a series of quasi-2D perovskites with different alkylammonium cations. Importantly, we find that short alkylammonium spacers offer better electrical properties for efficient current transport and high performance in LED applications. This work contributes to controlling the optoelectronic properties of quasi-2D perovskites via controlling their crystal growth as well as paves the way to realize practical lighting and display applications of perovskite LEDs.
研究领域:
材料科学
·
光电功能材料
·
半导体器件
·
纳米结构材料
·
固态照明
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 33
·14103-14107
·
IF 3.288
Chanchan Xu,Le Lv,Dawei Luo,Wei Liu
By using pyrazine derivatives, three different types of copper(I) iodide based inorganic–organic hybrid structures, 1D-CuI(2-mo-pz) (1, 2-mo-pz = 2-methoxy-pyrazine), 2D-CuI(2,3-dm-pz)0.5 (2, 2,3-dm-pz = 2,3-dimethyl-pyrazine), and 2D-Cu2I2(2,5-dm-pz)2 (3, 2,5-dm-pz = 2,5-dimethyl-pyrazine), have been obtained by using a slow-diffusion method. Single crystal and powder X-ray diffraction analyses reveal that these hybrid structures are a one-dimensional (1D) staircase chain based structure, two-dimensional (2D) staircase-chain based structure, and 2D rhomboid dimer based structure, respectively. All of the three compounds show photoluminescence, with the internal quantum yield (IQY) as high as 88.2% for 1. This work provides evidence that for this type of hybrid materials, the structure of the inorganic module could be determined by the selection of the organic ligands and that the substituted group on the organic ligands can influence the luminescence efficiency of the hybrid structures.
研究领域:
无机化学
·
材料化学
·
配位化学
·
光物理
·
功能材料
✓ 已验证
DOI
高影响因子
OPTICS AND LASER TECHNOLOGY
·
2023
·
IF 5
Shizhou Tan,Pengcheng Jian,Maocheng Shan,Yongming Zhao,Zhihua Zheng,Yiming Yang,Yuhui Zeng,Dan Xu,Zhenyu Chen,Changqing Chen,Feng Wu,Jiangnan Dai
In this work, we demonstrated tunable structured AlGaN-based nanoporous (NP) distributed Bragg reflectors (DBRs) with high-reflectivity through one-step vertical-lateral electrochemical etching (ECE). The aperture of nanopores in the doping layer and the size and density of V-pits on the surface of NP-DBRs can be tuned by controlling the etching bias. Furthermore, by further tuning the thickness of alternating layers, we achieved high reflectivity of NP-DBRs at multiple center wavelengths within the wavelength range from 280 to 800 nm. To explore its potential applications, MoS 2 with a photoluminescence (PL) emission in the red light region was grown for the first time on the NP-DBRs. Due to the light localized effect of surface V-pits and the high reflectivity of the bottom DBRs , the PL intensity of MoS 2 was significantly enhanced by a factor of 37.3 compared to the region without NP-DBRs. The PL enhancement of MoS 2 on porous AlGaN and different periodic NP-DBRs further validated the PL enhancement mechanism. The corresponding theoretical simulations also revealed that the PL enhancement should be attributed to the combined effect of enhanced light absorption and NP-DBRs induced emission interference. The fabricated AlGaN-based NP-DBRs provide a new approach for improving the quantum efficiency of two-dimensional layered materials, which holds significant importance for advancing the development of miniaturized and integrated 2D/3D heterogeneous structure systems in the field of optoelectronics.
研究领域:
光电子学
·
半导体材料
·
纳米光子学
·
二维材料
·
固体物理
·
表面科学
·
集成光子器件
✓ 已验证
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2018
·
IF 2.732
Qinghua Yang,Benxue Jiang,Shuilin Chen,Yiguang Jiang,Pande Zhang,Jun Wang,Shiqing Xu,Long Zhang
Al 2 O 3 : Er 3+ /Yb 3+ transparent ceramics codoped with Zn 2+ ions with intense upconversion and near infrared emission were prepared by conventional solid-state reaction and vacuum and hot isostatic pressing sintering. The effects of Zn 2+ incorporation to the structure, transparent, upconversion and NIR luminescence were discussed in detail. The as prepared Al 2 O 3 ceramics exhibited a total transmittance of ~ 75% in infrared regions (800–3300 nm) and ~ 50% in visible regions (500–800 nm). Under the excitation of a 980 nm laser diode , the as prepared Al 2 O 3 ceramics displayed two tense upconversion emission peaks of a green one centered at 550 nm and a red one centered at 660 nm and a tense near infrared emission peak centered at 1.532 µm, characteristic of Er 3+ emission. Compared with Er 3+ /Yb 3+ doped only, Zn 2+ codoped Al 2 O 3 :Er 3+ /Yb 3+ transparent ceramics showed higher upconversion and near infrared emission of ~ 11 times and ~ 4 times, respectively. The enhancement mechanism due to incorporation of Zn 2+ ions was also discussed in detail.
研究领域:
材料科学
·
光学材料
·
无机非金属材料
·
发光材料
·
陶瓷工程
✓ 已验证
DOI
高影响因子
Advanced Healthcare Materials
·
2024
·Vol. 14
·期 1
·2402272
·
IF 10
Hongwei Zhang,Linfu Chen,Qian Chen,Qiufang Chen,Jun Zhou
Tirapazamine (TPZ), an antitumor prodrug, can be activated in hypoxic environment. It specifically targets the hypoxic microenvironment of tumors and produces toxic free radicals. However, due to the tumor is not completely hypoxic, TPZ often fails to effectively treat the entire tumor tissue, resulting in suboptimal therapeutic outcomes. Herein, a low pathogenic Escherichia coli TOP10 is utilized to selectively colonize tumor tissues, disrupt blood vessels, and induce thrombus formation, leading to the expansion of hypoxic region and improving the therapeutic effect of TPZ. Additionally, a thermosensitive hydrogel is constructed by Pluronic F-127 (F127), which undergoes gelation in situ at the tumor site, resulting in sustained release of TPZ. To monitor the therapeutic process, it is genetically modified TOP10 by integrating the bioluminescent system luxCDABE (TOP10-Lux). The bioluminescent signal is associated with tumor hypoxia enhancement and thrombus formation, which is beneficial for therapeutic monitoring with bioluminescence imaging. In the murine colon cancer model, the TOP10-Lux combined with TPZ-loaded F127 hydrogel effectively suppressed tumor growth, and the treatment process is efficiently monitored. Together, this work employs genetically modified TOP10-Lux to enhance the therapeutic efficacy of TPZ and monitor the treatment process, providing an effective strategy for bacteria-based tumor-targeted chemotherapy and treatment monitoring.
研究领域:
肿瘤学
·
微生物治疗
·
分子影像学
·
药物递送
·
生物材料
·
转化医学
·
合成生物学
✓ 已验证
DOI
高影响因子
OPTICS AND LASER TECHNOLOGY
·
2016
·
IF 1.879
Rong Chen,Ying Tian,Bingpeng Li,Feifei Huang,Caizhi Wang,Xufeng Jing,Junjie Zhang,Shiqing Xu
Nd 3+ /Ho 3+ co-doped silicate-germanate glass has been synthesized by high temperature melt-quenching method. Near infrared emission centered at 2 µm has been successfully obtained by incorporating Nd 3+ and Ho 3+ in present glass. The Judd-Ofelt intensity parameters Ω t (t=2, 4, 6), and radiative properties of Ho 3+ were calculated and discussed by using the Judd-Ofelt theory. The energy transfer processes and luminescence properties of Nd 3+ /Ho 3+ co-doped glasses were analyzed pumped by a conventional 808 nm laser diode . Desirable spectroscopic characteristics indicates that Nd 3+ /Ho 3+ co-doped silicate-germanate glass might be a good alternative matrix for 2 µm band mid-infrared laser.
研究领域:
光学材料
·
无机非金属材料
·
光子学
·
激光技术
·
固体物理
✓ 已验证
DOI
高影响因子
Laser & Photonics Reviews
·
2024
·Vol. 19
·期 1
·2401012
·
IF 9.8
Pengcheng Jian,Maohua Chen,Dongyan Li,Yongming Zhao,Weijie Liu,Yuang Luo,Xiantai Tian,Meng Peng,Xing Zhou,Jiangnan Dai,Feng Wu,Changqing Chen
The extraordinary mechanical compliance of 2D molybdenum disulfide (MoS 2 ) makes it an ideal candidate for strain modulation of various electrical and optical properties. However, developing facile methods for accurate and stable engineering of strain still remains a major challenge. Here, a novel and effective method is demonstrated for introducing periodic strain into monolayer MoS 2 by direct growth on nano-patterned sapphire substrates (NPSS). A mixed aqueous solution of Na 2 MoO 4 and NaOH is spin-coated on the NPSS and sulfurated in one step by chemical vapor deposition (CVD). Highly oriented monolayer MoS 2 single-crystal nanosheets with high quality and few sulfur vacancies are achieved conformally on the NPSS via a liquid-mediated growth mode. Notably, the periodically distributed blue shift of the PL emission peak demonstrated periodic compressive strain is introduced into the nano-patterned MoS 2 via the thermal expansion difference between MoS 2 and substrates. Furthermore, photodetectors fabricated using the nano-patterned monolayer MoS 2 exhibit a high photo-to-dark current ratio (PDCR) over 10 6 , an excellent detectivity of 5.4 × 10 13 Jones, and a fast photoresponse of 7.7 ms, owing to the strain-induced back-to-back built-in electric field, enhanced light absorption by light-scattering effect and fewer S vacancy defects. The scanning imaging demonstration based on the single-pixel nano-patterned MoS 2 photodetector further confirms its great potential in image sensors. This work hereby presents a pathway for direct conformal growth of nano-patterned monolayer MoS 2 with precisely periodic strain, which should inspire the applications for high-performance optoelectronic devices via the strategy of patterned substrate engineering by the periodic nanostructures.
研究领域:
材料科学
·
纳米科技
·
光电子学
·
凝聚态物理
·
表面科学
·
半导体器件
✓ 已验证
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2022
·Vol. 24
·期 3
·69
·
IF 2.533
Song Rong,Li Ying,Qian Jun
Perovskite has shown attractive optoelectronic performances and is a potential material in lighting, anti-counterfeiting, sensor, and other optoelectronic devices. Recently, spin-coating has been widely used in fabricating high-performance perovskite films, but it is difficult to process and apply in practice. In this paper, the CsPbBr 3 /Cs 4 PbBr 6 composite perovskite quantum dots with photoluminescence quantum yield of 36% and high storage stability were prepared by using room temperature ligand-assisted precipitation method and controlling the proportion of CsBr/PbBr 2 . In addition, the composite perovskite was ground and dispersed in the inks system. After adjusting the composition and ratio of the resin components, the inks were suitable for screen printing with a viscosity of 2439 mPa•s, an initial dryness of 25 mm/30 s, and a thorough dryness of 100 s/100 μm. By printing, the perovskite films exhibited high coverage, strong green emission, and outstanding fluorescence recovery ability after exposure to water. Screen printing perovskite inks have the characteristic of being patternable, which provides a solution for preparing a perovskite film in the application.
研究领域:
材料科学
·
纳米科技
·
光电子学
·
印刷电子
·
荧光材料
✓ 已验证
DOI
高影响因子
ACS Applied Optical Materials
·
2023
·
IF 0
Zhennan Wang,Yi Wei,Zhiliang Ren,Wei Wang,Dong Tu,Guogang Li
Near-infrared (NIR) light serves a key role in many potential applications such as food analysis, biomedical devices, night vision, and so on. As an important component of NIR phosphor-converted light-emitting diodes (pc-LEDs), the adjustment of emission peak position and spectral width of Cr3+-doped phosphors is still considered to be a crucial challenge. Herein, the two emissions at 740 nm from [Cr1O6] and 830 nm from [Cr2O4] were realized to broaden the emission band in the Al2.26Ge0.74O4.87:Cr3+ (AGO:Cr3+) phosphor. Moreover, with increasing Cr3+-doped concentration, the crystal field strength decreases and energy transfer from [Cr1O6] to [Cr2O4] is enhanced. The emission peak originating from [Cr2O4] gradually becomes dominant, resulting in a spectral red shift and broadening. The optimized AGO:0.7% Cr3+ phosphor shows remarkable thermal stability, of which the integrated intensity at 373 K keeps 86% of the initial intensity at 298 K. Under 405 nm excitation, the internal quantum efficiency could reach 70% and the external quantum efficiency was measured to be 23%. The application of night vision can be implemented based on the AGO:Cr3+-fabricated NIR pc-LED. This work achieves simultaneous modulation of luminescence color and spectral width by controlling the Cr3+-doped concentration, which provides a feasible strategy for NIR emission adjustment.
研究领域:
材料科学
·
光学材料
·
固态照明
·
光子学
·
发光
✓ 已验证
DOI
CERAMICS INTERNATIONAL
·
2023
·Vol. 49
·期 24
·40846-40852
·
IF 5.2
Xinrong Chen,Shaoda Yuan,Yanghan Guo,Bingguo Liu,Shiqing Pang,Le Zhang,Baoli Du,Carsten Dam-Hansen,Jian Xu,Ole B. Jensen
Eu 2+ doped-CaAlSiN 3 possesses broad red emission, enabling a phosphor-converted lighting device to achieve a high color rendering index (CRI) and proper color temperature. However, CaAlSiN 3 :Eu 2+ exhibits relatively slow decay (∼1 μs) and intense re-absorption of luminescence from green/yellow emitters, thereby causing optical saturation and reducing the luminous efficacy. Here, we fabricated a novel phosphor converter comprising Lu 3 Al 5 O 12 :Ce 3+ and Y 1.3 Gd 1.6 Al 5 O 12 :Ce 3+ powders. The typical sample, when excited by a blue laser , exhibited a high luminous efficacy of 231 lm/W and a high saturation threshold of 22.2 W/mm 2 , resulting in a high luminous exitance of 695 lm/mm 2 . Importantly, the phosphor converter produced a broad emission band that included sufficient cyan and red components, resulting in a full width at half maximum (FWHM) of 134 nm and a high CRI of 81. With this excellent balance between CRI and luminous efficacy, the reported phosphor converter can significantly expand the range of laser lighting applications.
研究领域:
光学材料
·
固态照明
·
光子学
·
发光
·
材料科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）