文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

热门产品

视图 列表 网格

显示第85至96个,产品总数882个

设置提升方向
Fe3
CHEMISTRY & BIODIVERSITY · 2024 · IF 2.3

Tannin Acid/Fe3+ Composite Film Filled with Essential Oil Extracted from Melaleuca bracteata F. Muell Leaves for the Preservation of Mango

Xiaonan Zhang,Xiaocheng Zhuang,Manxin Chen,Jingrong Wang,Zhuoyu Liu,Daxiong Qiu,Jinna Wang,Yan Huang,Weina Li,Zhiwei Liu

Tannic acid and Fe 3+ were used in this study to create a polyphenol–metal network-based composite film for the preservation of Melaleuca bracteata essential oils. The inhibition rate of ABTS and DPPH free radicals reached more than 90 % at an essential oil concentration of 20 mg/mL. Additive quantities of 2.0 % essential oil nano-emulsion, 0.8 % tannic acid/Fe 3+ solution, 0.4 % microcrystalline cellulose, and 1 % chitosan were used to maximize the characteristics of the composite films. When combined with FTIR analysis, X-ray diffraction and scanning electron microscopy revealed that the composite film containing the essential oil emulsion had a more reticulated structure. The essential oil composite layer on mangoes increased the fruit shelf time to 12 days, decreased weight loss by 10.81±4.70 %, increased the amount of soluble solids by 2.03±0.31 %, and increased the amount of vitamin C by 2.18±0.09 %. A trustworthy technical method for the storage and transportation of agricultural goods is offered by this study. Graphical

CAS / MDL: 56180-94-0 96829-58-2
研究领域: 食品科学 · 植物化学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2021 · IF 8.128

Electrochemical process of early-stage corrosion detection based on N-doped carbon dots with superior Fe3+ responsiveness

Zheng Liu,Ruonan Jia,Feng Chen,Guilong Yan,Weiguo Tian,Jinming Zhang,Jun Zhang

Iron corrosion is a subject of great technological importance and extensive public concern. However, the highly efficient detection of iron corrosion at early stage is still a challenging task. Herein, bright fluorescent carbon dots (CDs) with superior response to Fe 3+ were prepared by simple solvothermal process based on citric acid and ammonia. The obtained CDs are able to rapidly, sensitively and selectively respond to Fe 3+ . The quantitative analysis showed that the CDs exhibited a linear response to Fe 3+ in the range of 10 to 300 µM, with a detection limit of 0.9 μM. And the fluorescence quenching of CDs was obvious enough to be detected by the naked eyes. Such promising responsiveness of CDs offers a great opportunity for real-time and visual detection of Fe 3+ during electrochemical corrosion process. In addition, due to the excellent stability and solubility of CDs, patterned papers and hydrogels have been fabricated utilizing cellulose and PVA as matrices. The as-prepared biocompatible, environmental-friendly and disposable CDs based fluorescent materials were successfully used for detecting the degree of iron corrosion. This could provide a simple and visual strategy for monitoring the safety of structural metal materials.

研究领域: 材料科学 · 电化学 · 分析化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
EUROPEAN POLYMER JOURNAL · 2021 · IF 4.598

Novel water soluble polymeric sensors for the sensitive and selective recognition of Fe3+/Fe2+ in aqueous media

Suyan He,Luminita Marin,Xinjian Cheng

Fe 3+ and Fe 2+ are common metal ions in natural water environments and creatures. The development of water-soluble fluorescent sensors for detecting Fe 2+ /Fe 3+ ions was of great significance. In this work, two kinds of boron fluoride dipyrrole (BODIPY) fluorescent small-molecules were synthesized firstly. One of the small molecules contains a thioester bond that can be used as a chain transfer agent to participate in the polymerization process, and the other contains an unsaturated C = C double bond at the meso position. Through the reversible addition-fragmentation chain transfer polymerization (RAFT) polymerization method, methacrylic acid (MAA) and methacrylamide (MAM) were used as the main monomers, and small molecular fluorescent monomers were introduced to the end of the main chain. In this way, fluorescent macromolecules were obtained. The polymers were water soluble owing to the presence of long enough hydrophilic carboxyl and amide chains. These fluorescent probes exhibit high sensitivity to Fe 2+ /Fe 3+ , good selectivity, and anti-interference of other ions. The detection limit for Fe 2+ was as low as 2.3 × 10 −7 M, and the detection limit for Fe 3+ can reach up to 4.5 × 10 −7 M. The results show that these probes can be used as good sensors to identify Fe 2+ and Fe 3+ . Moreover, the fluorophores could be incorporated into polymer chains as the RAFT reagents and/or functional monomers.

研究领域: 化学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION · 2021 ·Vol. 38 ·期 4 ·2000332 · IF 3.31

Polyvinyl Alcohol Enhanced Fluorescent Sulfur Quantum Dots for Highly Sensitive Detection of Fe3+ and Temperature in Cells

Jiehao Lei,Zeming Huang,Pengxiang Gao,Jiahui Sun,Li Zhou

As a new class of metal-free fluorescent dots, sulfur quantum dots (SQDs) have attracted more and more attention because of their unique properties and promising applications in many fields. However, synthesizing SQDs with high optical stability and stimuli-responsive fluorescence is still in its infancy. Herein, a simple one-pot strategy is reported for preparing polyvinyl alcohol (PVA)-capped SQDs from cheap elemental sulfur by employing PVA as ligand. The as-prepared SQDs with size in range of 1.5–5 nm show fine water dispersibility and stability, bright fluorescence, good optical stability, and low cytotoxicity, which make them potential for cell imaging. In addition, the SQDs show sensitive and selective fluorescence quenching behavior toward Fe 3+ with a detection limit of 92 × 10 −9 m . Meanwhile, the SQDs also present temperature-dependent fluorescence and hold promise for working as a nanothermometer. For the first time, the utilization of SQDs for monitoring of Fe 3+ and temperature in the interior of cells is confirmed in this study. This work thus opens new opportunities for expanding the application fields of SQDs.

研究领域: 材料科学 · 生物医学工程 · 分析化学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Science & Engineering C-Materials for Biological Applications · 2021 · IF 7.328

Synergy coordination of cellulose-based dialdehyde and carboxyl with Fe3+ recoverable conductive self-healing hydrogel for sensor

Ying Wang,Hui Zhang,Haichuan Zhang,Junqing Chen,Bingyun Li,Shiyu Fu

A novel dual ionic network cellulose-based composite conductive self-healing hydrogel was fabricated with high elongation, rapid recoverability, high conductive sensitivity, self-healing ability and good biocompatibility. The hydrogel was constructed by the synergistic complexations of new-fashioned bidentate aldehyde groups on dialdehyde cellulose nanofibers (DACNFs) and carboxyl groups of acrylic acid (AA) with Fe 3+ . The elongation (~1300%) of the hydrogel containing 1 wt% DACNFs was approximate 13-fold of the pure PAA hydrogel and can recover to original state within 2 min after 80% compression. The self-healing efficiency increased with the addition of DACNFs in the dual ionic network cellulose-based composite conductive self-healing hydrogel. The hydrogel configured for a wearable test and showed high stretching sensitivity with a gauge factor of 13.82 at strain within 1.6%. The gauge factor (GF) decrease with the incremental strain within 20%. GF were 0.696 between 20% and 300% strain, 0.837 within 300% and 500%. Meanwhile, the current had a good linear relationship with the bending angles of hydrogels and pressure on hydrogels, which may provide a great potential in monitor both minor variations and large movements.

研究领域: 材料科学 · 生物医学工程
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY · 2017 · IF 3.154

Effects of Fe3+ and Antioxidants on Glycidyl Ester Formation in Plant Oil at High Temperature and Their Influencing Mechanisms

Weiwei Cheng,Guoqin Liu,Xinqi Liu

This research investigated the effects of Fe3+ and antioxidants on the formation of glycidyl esters (GEs) and the free radical mediated mechanisms involving the recognition of cyclic acyloxonium free radical intermediate (CAFRI) for GE formation in both the plant oil model (palm oil, camellia oil, soybean oil, and linseed oil) system and the chemical model (dipalmitin and methyl linoleate) system heated at 200 °C. Results show that Fe3+ can promote the formation of GEs, which can be inhibited by antioxidants in plant oil during high-temperature exposure. Based on the monitoring of cyclic acyloxonium and ester carbonyl group by Fourier transform infrared spectroscopy, the promotion of Fe3+ and the inhibition of antioxidants (tert-butylhydroquinone and α-tocopherol) for GE formation occurred not only through lipid oxidation but also through directly affecting the formation of cyclic acyloxonium intermediate. Additionally, a quadrupole time-of-flight tandem mass spectrometry measurement was conducted to identify the presence of radical adduct captured by 5,5-dimethylpyrroline N-oxide, which provided strong evidence for the formation of CAFRI. Thus, one possible influencing mechanism can be that free radical generated in lipid oxidation may be transferred to dipalmitin and promote CAFRI formation. Fe3+ can catalyze free radical generation while antioxidants can scavenge free radical, and therefore they also can directly affect CAFRI formation.

CAS / MDL: 112-63-0
研究领域: 食品科学 · 化学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry B · 2016 ·Vol. 4 ·期 47 ·7549-7559 · IF 4.872

A novel triphenylamine-BODIPY dendron: click synthesis, near-infrared emission and a multi-channel chemodosimeter for Hg2+ and Fe3+

Bao-xing Shen,Ying Qian

A novel triphenylamine-BODIPY based Schiff base fluorescent probe (TPA-BODIPY-OH) with an emission in the near-infrared (NIR) region was designed and prepared by click reaction. TPA-BODIPY-OH showed three emission bands at 510 nm, 598 nm and 670 nm, and can detect Fe3+ and Hg2+ ions with remarkable fluorescence enhancement in THF/H2O (v/v, 1 : 1, buffered with 10 mM HEPES pH = 7.4) based on the hydrolysis reaction of the –CN bond, and naked eye detection was realized with an obvious color change. The stoichiometry between the probe and ions was deduced from a Job's plot, which is 1 : 3 for TPA-BODIPY-OH/Fe3+ and 1 : 2 for TPA-BODIPY-OH/Hg2+, respectively. The dissociation constant value was found to be 1.35 × 10−16 M for TPA-BODIPY-OH/Fe3+ and 2.06 × 10−11 M for TPA-BODIPY-OH/Hg2+. The low detection limit was calculated from the titration results with the values of 5.15 × 10−7 M for TPA-BODIPY-OH/Fe3+ and 6.81 × 10−7 M for TPA-BODIPY-OH/Hg2+, respectively. In order to investigate the biological applications of TPA-BODIPY-OH, a living cell imaging experiment was carried out. The results demonstrate that TPA-BODIPY-OH can be successfully applied as a bioimaging agent in living cells. In addition, amino-group-functionalized silica fluorescent nanoparticles (FNPs) encapsulating the TPA-BODIPY-OH dyes were prepared and characterized by transmission electron microscopy. TPA-BODIPY-OH/SiO2 nanoparticles exhibit good dispersibility, and the quantum yield of FNPs at 657 nm was 42.3%.

CAS / MDL: 577-11-7 78-08-0
研究领域: 化学 · 生物成像 · 材料科学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Sustainable Energy & Fuels · 2018 ·Vol. 3 ·期 2 ·390-395 · IF 0

Efficient conversion of glucose into 5-hydroxymethylfurfural using a bifunctional Fe3+ modified Amberlyst-15 catalyst

Siquan Xu,Chunyu Yin,Donghui Pan,Feng Hu,Yuanfeng Wu,Yanan Miao,Lijing Gao,Guomin Xiao

In this study, a series of Fe3+ modified Amberlyst-15 resins (Fe/AR) were prepared and used as environmentally friendly bifunctional catalysts for the conversion of glucose to 5-hydroxymethylfurfural (HMF). The physicochemical properties of the Fe/AR catalysts were characterized by XRD, SEM-EDX, XPS, TG-DTA and FTIR spectroscopy techniques. It was found that the 10%-Fe/AR catalyst has the ability to synergistically catalyze the isomerization of glucose and the dehydration of fructose in a “one-pot” reaction, and allows an impressive 68% HMF yield to be achieved in the H2O/THF biphasic system. Moreover, the 10%-Fe/AR catalyst still retained the desired catalytic activity after four consecutive cycles.

研究领域: 化学工程 · 催化化学
✓ 已验证 DOI
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2016 ·Vol. 40 ·期 12 ·10213-10218 · IF 3.277

Nitrogen-doped carbon dots as a fluorescence probe suitable for sensing Fe3+ under acidic conditions

Guangming Li,Nan Lv,Wenzhi Bi,Jilin Zhang,Jiazuan Ni

To obtain nitrogen-doped carbon dots (N-CDs) for sensing Fe3+ under acidic conditions, robust and highly fluorescent N-CDs were prepared by one-pot hydrothermal treatment of dopamine and ethylenediamine. The N-CDs have a relatively uniform size of approximately 4.9 nm and good water dispersibility. The N-CDs exhibit strong visible fluorescence (ca. 497 nm) and high stability at low pH (i.e. 2–3). The FTIR spectra and the XPS analyses indicated that primary amines and distinctive catechol groups exist on the surface of the N-CDs. The FTIR spectra further prove that the catechol groups on their surfaces can be oxidized to the quinone species by Fe3+, contributing to fluorescence response to Fe3+. Thus, the N-CDs as fluorescence probes allowed the detection of Fe3+ under acidic conditions, which has been verified in this work.

CAS / MDL: 62-31-7
研究领域: 化学 · 分析化学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY · 2022 · IF 4.831

An efficient ethylcellulose fluorescent probe for rapid detection of Fe3+ and its multi-functional applications

Yangmei Wu,Zhiyuan Meng,Fei Zhao,Shifa Wang,Zhonglong Wang,Yiqin Yang

Fe 3+ is the most abundant essential transition metal ion in the human body, plays a vital role in biological and environmental systems. Ethyl cellulose is one of the derivatives of cellulose. Herein, a novel ethylcellulose fluorescent probe EC-HPCB for detecting Fe 3+ was prepared by grafting a flavonol derivative as both fluorophore and selective recognition group. The probe exhibited a highly specific “turn-off” fluorescence response to Fe 3+ , and the fluorescence color changed from yellow to colorless in the presence of Fe 3+ . The detection limit of EC-HPCB for Fe 3+ was 2.65 × 10 −7  mol/L, and the response time was as quick as 2 min. The detection mechanism was confirmed by 1 H NMR and DFT calculations. Based on the good solubility and processability in organic solvent, EC-HPCB was made into coating and film with favorable fluorescent performances. Furthermore, EC-HPCB probe was successfully applied to monitor Fe 3+ in real water samples, and the EC-HPCB -loaded filter paper provided a solid-state platform for detecting Fe 3+ by naked eye and fluorescence method.

研究领域: 分析化学 · 环境科学 · 生物化学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CELLULOSE · 2021 ·Vol. 28 ·期 3 ·1647-1661 · IF 5.044

From coconut petiole residues to fluorescent carbon dots via a green hydrothermal method for Fe3+ detection

Gao Shiyu,Wang Xi,Xu Nan,Lian Hailan,Xu Li,Zhang Wenqing,Xu Changyan

Abstract Incinerating agricultural residues to recover energy is a popular method for reducing solid waste pollution and resource waste caused by the huge amount of coconut petiole residues. However, this process not only has the risk of secondary air pollution, but also the added value of comprehensive utilization is not high. In this paper, coconut petiole residues were used as eco-friendly and economical raw materials to synthesize carbon dots (CCDs) via a simple hydrothermal method. Furthermore, given the important reference significance of Fe 3+ concentration in assessing the quality of water environment and human body health, the obtained CCDs were utilized for Fe 3+ detection. The prepared spherical CCDs with an average diameter of 1.39 nm and a carbon skeleton dominated by benzene ring structure have surface functional groups that endow them with good water solubility. The CCDs with a quantum yield of 1.39% emit strong blue fluorescence under ultraviolet radiation (365 nm), and show favorable fluorescence stability with excitation-dependent and concentration-dependent emission behaviors. Based on the synergetic effect of static and dynamic quenching, the CCDs exhibit favorable selectivity and detection sensitivity toward Fe 3+ with a linear range of 0.005 to 0.2 mM and a detection limit of 2.3 μM, and also show the feasibility of Fe 3+ detection in real water samples. This work is in favor of the high value-added conversion of coconut petiole residues. In addition, the development and use of bio-based CCDs as fluorescence sensors may be beneficial to monitoring and protecting public health and the environment. Graphic abstract

研究领域: 环境科学 · 材料科学 · 分析化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF HAZARDOUS MATERIALS · 2021 · IF 10.588

A novel electro-Fenton process coupled with sulfite: Enhanced Fe3+ reduction and TOC removal

Ge Song,Xuedong Du,Yang Zheng,Pei Su,Yunping Tang,Minghua Zhou

To promote the reduction of Fe 3+ and improve the mineralization of organic pollutants , a novel electro-Fenton coupled with sulfite (Fe 3+ -EF/sulfite) process was constructed, which was superior to Fe 3+ -EF process in terms of carbamazepine (CBZ) degradation and mineralization with 5.99 times enhancement in degradation rate constant and 15.7 times enhancement on TOC removal. The complexation of Fe 3+ and sulfite prevented the precipitation of Fe 3+ , reduced Fe 3+ to Fe 2+ , and accelerated the iron cycle, so that H 2 O 2 utilization efficiency (0.051 mg TOC mg H2O2 −1 ) was greatly improved and electric energy consumption was greatly reduced (0.081 kWh g −1 TOC). The quenching experiments and EPR test confirmed that the reactive species, such as SO 3 •- , SO 4 •- , • OH, O 2 •- and 1 O 2 were responsible for the degradation of CBZ. This process also expanded the pH application range from 3 to 9 with satisfactory CBZ removal efficiency. This work verified the suitability of the Fe 3+ -EF/sulfite process for different sulfites (sulfite and bisulfite), typical pollutants (atrazine, sulfamethazine, rhodamine B) and real wastewater with 2.1–18.7 folds enhancement in degradation rate. The Fe 3+ -EF/sulfite process can achieve deep mineralization with low cost and simple operation, which has a broad and cost-effective application prospect in removal of refractory organic pollutants.

研究领域: 环境科学 · 水处理技术
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。