RSC Advances
·
2022
·Vol. 12
·期 34
·21681-21689
·
IF 4.036
Na Cao,Jiayi Liu,Yuecheng Wang,Yingwu Zhou,Meng Zhao,Yujie Ban,Weishen Yang
The adsorption of bio-polyols from dilute aqueous solution is important but faces challenges in the sustainable bio-refinery process. One solution to increase adsorption efficiency is to leverage host–guest interactions between the polyols and materials to grant a preference for polyols. In this study, we synthesized MIL-53 and diverse OH-bonded variants, and studied their adsorption properties towards ethanediol, 1,3-propanediol and glycerol in water. Among the four materials, OH–MIL-53 exhibited fast adsorption kinetics and high capacity, and could be completely regenerated through ethanol elution. Hydrophobic interactions between the alkyl chains of the polyols and the organic linkers of OH–MIL-53 and hydrogen bonding interactions between their OH groups were identified. The synergistic effect of the host–guest interactions is responsible for the unique adsorption performances of OH–MIL-53 towards polyols, and particularly for 1,3-propanediol.
研究领域:
材料科学
·
化学工程
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2025
·
IF 6.1
Qiaoli Yang,Xiao Yang,Ke Guo,Guangrui Pan,Qiuzheng Du,Liang Ming,Wanhai Wang
Pseudomonas aeruginosa (PA) infection poses a significant threat to human health and the economy, with the issue of drug resistance becoming increasingly severe. How to quickly, accurately, and inexpensively detect PA and differentiate live bacteria from dead ones is crucial for clinical follow-up treatment. To this end, we have developed a biosensor based on fluorescent metal-organic frameworks (MOFs) (Eu 3+ @MIL-53(Al)) and specific-phages for PA detection, where the Eu 3+ @MIL-53(Al) prepared by one-pot method exhibits excellent fluorescence properties. By covalently binding specific phages isolated from hospital wastewater to the EuMOF surface, we constructed a fluorescent biosensor capable of detecting PA within 15 min, with a sensitivity threshold of 2 CFU/mL. Notably, this biosensor demonstrates high specificity, accurately quantifying live PA in complex bacterial mixtures and distinguishing live from dead bacteria. Its practical application has been validated in clinical blood and stool samples. As a novel platform for clinical microbial monitoring, the Eu 3+ @MIL-53(Al)-phage biosensor not only holds substantial economic potential but also carries significant public health implications.
研究领域:
微生物学
·
医学检验
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Huanan Zhao,Zipeng Xing,Siyi Su,Sijia Song,Zhenzi Li,Wei Zhou
NH 2 -MIL-53(Al)/CdS p-n heterojunctions are fabricated via facile two-step hydrothermal method. The formation of p-n heterojunctions could form built-in field, which favors spatial charge separation. The resultant NH 2 -MIL-53(Al)/CdS p-n heterojunctions with narrowed band gap extend the photoresponse, and have a high specific surface area of 417.7 m 2 g −1 , and a narrow pore size of 8.8 nm. Under visible light irradiation, the photocatalytic efficiency for reduction of Cr(VI) and removal of refractory pesticide trichlorophenol is up to 99.23 and 98.85 %, respectively. The photocatalytic oxygen evolution is also as high as 563.6 μmol g −1 h −1 . The excellent photocatalytic activity can be ascribed to the efficient p-n heterojunctions accelerating charge transfer and favoring spatial charge separation, and the special mesoporous structure supplying adequate surface-active sites and facilitating mass transfer. This facile strategy opens up new insights for fabricating other p-n heterojunctions photocatalysts with efficient solar energy conversion.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2016
·
IF 8.328
Zhiwang Yang,Xueqing Xu,Xixi Liang,Cheng Lei,Yuli Wei,Peiqi He,Bolin Lv,Hengchang Ma,Ziqiang Lei
A series of MIL-53(Fe)-graphene nanocomposite photocatalysts were synthesized by a facile one-pot solvothermal reaction. All materials have been thoroughly characterized by FT-IR, SEM, TEM, PXRD, UV–vis DRS and PL analysis. It was demonstrated that the introducing of graphene on the MIL-53(Fe) would minimize the recombination of photogenerated electron-hole pairs, thus, leading to the enhancement of photocatalytic activity. MIL-53(Fe)-graphene nanocomposite was an efficient catalyst towards the photocatalytic selectively oxidation of alcohols to the corresponding aldehydes or ketones under visible light and ambient conditions. High selectivity of the aldehydes or ketones (99%) were obtained. Meanwhile, the catalyst can be recycled at least four times without loss of catalytic efficiency. A possible photocatalytic reaction mechanism involving a direct photogenerated hole-oxidation process was also investigated in detail by the active species trapping experiments and the related electrochemical analysis.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Heng Mao,Shen-Hui Li,Ao-Shuai Zhang,Li-Hao Xu,Heng-Xing Lu,Jing Lv,Zhi-Ping Zhao
Furfural is a typical biomass-derived platform chemical. Conventional processes for furfural production are uneconomical and energy-intensive because only about 3–6 wt% of furfural in the hydrolysate needs to be separated. In this study, a series of mixed matrix membranes (MMMs) were prepared by incorporating MIL-53(Al) particles (MAPs) into poly (ether-block-amide) (PEBA 2533) matrix for pervaporation separation of furfural from aqueous solutions. The MAPs with anisotropic morphology and tunable particle size were precisely synthesized by a high-efficiency solvent-controlled microwave synthetic strategy. Effects of MAPs on the microstructures, physicochemical properties of MAPs/PEBA MMMs were investigated in detail through SEM, EDS, XRD, FTIR, TGA, N 2 adsorption and contact angle measurements. The experimental results suggested that compared with the PEBA control membrane, the addition of MAPs notably reduced the permeation energy barrier for furfural, but not for water. The coin-like MAPs-16.7 filled MMMs presented the optimal separation performance, which exceeded other furfural-permselective membranes. Impressively, a high total flux of 3800 g∙m −2 ∙h −1 and an adequate furfural/water separation factor of 50.2 was achieved in PV separation of 1 wt% furfural aqueous solution at 80 °C, which could substantially reduce capital investment and equipment footprint. Furthermore, a continuous testing was operated for 200 h in ternary furfural/acetic acid/water simulated hydrolysate, highlighting the long-term membrane stability in realistic applications. High performance and long-term stability made MAPs/PEBA MMMs potential candidates for industrial furfural production.
研究领域:
化学工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2020
·
IF 5.774
Zhoujun He,Ruowen Liang,Chen Zhou,Guiyang Yan,Ling Wu
Industrial sewage often contain metal ions and dyes, and it is difficult to efficiently remove them simultaneously. In this work, novel ternary MIL-53(Fe)/carbon quantum dots/noble metal (MIL-53(Fe)/CQDs/MNPs, MNPs = Ag, Pd, Au) nanocomposites have been rationally constructed and successfully fabricated by a facile two-step strategy with self-assembling and in-situ photoreduction. The resulting MIL-53(Fe)/CQDs/2%Au composite exhibits excellent photoactivity for the Cr(VI) reduction, the reduction ratio is nearly 100% after 20 min of visible light illumination. The rate constant of MIL-53(Fe)/CQDs/2%Au is calculated to be 0.1820 min −1 , which is around 7.4, 2.76, 1.77 and 1.47 times higher than that of as-prepared MIL-53(Fe), MIL-53(Fe)/CQDs, MIL-53(Fe)/CQDs/2%Ag and MIL-53(Fe)/CQDs/2%Pd, respectively. More significantly, MIL-53(Fe)/CQDs/2%Au nanocomposite has been proven to serve as bifunctional photocatalyst for simultaneously removing Cr(VI)/dye mixed system pollutants. The superior photoactivity may be due to the enhanced light absorption intensity, the superior electrical conductivity of Au and CQDs, as well as surface plasmon resonance (SPR) effect of Au. In particular, the possible photocatalytic reaction mechanism has been carefully investigated and proposed.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
Journal of Water Process Engineering
·
2025
·
IF 6.7
Jincheng Dai,Shuyue He,Xiyu Song,Chuliang Shen,Hongjuan Zhang,Ruyi Xie
The application of Fe-based metal-organic frameworks in photo-Fenton antibiotic degradation is limited by the low charge separation efficiency and slow Fe 3+ /Fe 2+ transition. In this study, a novel Z -scheme porous carbon nitride/mixed-valent MIL-53(Fe) (KCM-20) heterojunction photocatalyst was successfully constructed for degradation of high concentration tetracycline. On the one hand, the Z -scheme heterojunctions system is conducive to the rapid separation of photogenerated electron-hole pairs. On the other hand, the cyclic conversion of Fe 3+ /Fe 2+ in the MIL-53(Fe) photo-Fenton system can be accelerated. The KCM-20 showed the highest degradation efficiency for tetracycline. The KCM-20/light/H 2 O 2 system degraded more than 93 % of tetracycline (150 mg·L −1 ) within 75 min and exhibited the highest degradation kinetic constant, which is 8.0 and 2.4 times higher than those of carbon nitride and MIL-53(Fe), respectively. Its excellent catalytic performance can be attributed to the efficient synergy between photocatalytic reaction and Fenton reaction, producing more active species for tetracycline degradation. EPR and activity capture experiments indicate that ·O− 2, ·OH and h + are the main active species for tetracycline degradation. By analyzing the intermediate products, three degradation pathways for tetracycline were proposed. This work provides a new pathway for the preparation of efficient and cost-effective photocatalysts for the degradation of organic pollutants.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2021
·Vol. 11
·期 18
·10540-10547
·
IF 3.361
Anxia Li,Xiaoxin Yang,Juan Chen
Metal–organic frameworks (MOFs), such as MIL-53(Fe), have considerable potential as drug carriers in cancer treatment due to their notable characteristics, including controllable particle sizes, high catalytic activity, biocompatibility and large porosity, and are widely used in a broad range of drugs. In this study, a new approach for the synthesis of MIL-53(Fe) nanocrystals with controlled sizes has been developed using a non-ionic surfactant PVP as the conditioning and stabilizing agent, respectively. During the nucleation of MIL-53(Fe), the PVP droplet, as a nano-reactor, controlled the growth of the crystal nucleus. The size and aspect ratio (length/width) of nanocrystals increased with an increase in PVP in the synthetic mixture. The MIL-53(Fe) nanocrystals showed a homogeneous morphology, with approximately 190 nm in length and 100 nm in width. MIL-53(Fe) not only was used to load the anticancer drug doxorubicin (DOX) but also generated hydroxyl radicals (˙OH) via a Fenton-like reaction for ROS-mediated/chemo-therapy of cancer cells. The approach was expected to synthesize numerous types of nano-size iron(III)-based MOFs, such as MIL-53, 89, 88A, 88B and 101. The MIL-53(Fe) nanocrystals hold great promise as a candidate to improve the controlled release of drugs and treatment effect for cancer therapy.
研究领域:
材料科学
·
肿瘤学
·
药物递送系统
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2025
·
IF 2.8
Shangsong Han,Yong Wang,Binhong Gan,Jun Cai,Siyi Jiang,Cuiyu Huang,Shanshan Li
MIL-53(Fe), as a typical metal–organic framework (MOFs) material, has shown broad application prospects in the field of membrane separation technology due to its advantages such as high specific surface area and good chemical stability. However, few studies have specifically applied it to the preparation of oil–water separation membranes. Therefore, this study innovatively proposed a self-assembly strategy. By constructing a MOFs composite coating covering the membrane surface and a comprehensive metal polyphenol network (MPN), this approach was designed to form an efficient, comprehensive oil-rejection system while significantly enhancing pure water flux. Then, through a series of characterizations and performance tests, the results showed that the prepared composite membrane exhibited excellent oil–water separation performance: pure water flux was as high as 3641.21 L m −2 h −1 , and at the same time, the rejection rate of oil-in-water emulsion was stably maintained at more than 99.58%. Therefore, this study not only successfully verified the great potential of MIL-53(Fe)-based composite membranes in the field of efficient oil–water separation, providing a new theoretical basis and feasible technical path for its design, but also further expanded the practical application prospects of MOFs materials in the treatment of oily wastewater, opening up new ideas for the development of the next generation of high-performance separation membranes.
研究领域:
材料科学
·
环境工程
·
膜分离技术
·
物理化学
·
纳米材料
·
水处理技术
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Zhi-Heng Lu,Ibrahim Abdelhai Senosy,Dong-Dong Zhou,Zhong-Hua Yang,Hao-Ming Guo,Xiao Liu
In this work, a novel Fe 3 O 4 @ZnAl-LDH@MIL-53(Al) composite was synthesized by a facile three-step process and utilized as an adsorbent for the removal of azole fungicides from environmental water. The characterization results revealed that double hydroxide (ZnAl-LDH) and metal organic framework (MIL-53) have been successfully tethered to the shell of Fe 3 O 4 . The main factors affecting the removal efficiencies were investigated, and results revealed that Fe 3 O 4 @ZnAl-LDH@MIL-53(Al) composite possessed high removal efficiencies for azole fungicides. Furthermore, the adsorption mechanism was investigated and including hydrogen-bonding interaction, chemisorption and π–π interaction. The adsorption kinetic was more consistent with the pseudo-second-order kinetic model, and the whole adsorption process could reach the equilibrium within 5 min. Langmuir adsorption isotherm model could describe the adsorption process most accurately, and the maximum adsorption values of azole fungicides were in the range of 43.54–71.79 mg g −1 . Meanwhile, the adsorption thermodynamics indicated that the adsorption process was exothermic and spontaneous. Hence, Fe 3 O 4 @ZnAl-LDH@MIL-53(Al) composite had a great application potential in the removal of azole fungicides from the environment.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry B
·
2019
·Vol. 7
·期 44
·7006-7013
·
IF 5.047
Li Zhang,Xiaoni Ma,Hongbo Liang,Huihui Lin,Guangyu Zhao
Non-enzymatic glucose sensors are attracting significant attention owing to their low cost, storage convenience and reusability; however, their poor anti-interference caused by their weak selectivity towards glucose limits their practicability. In the present study, a MIL-53(NiFe) metal–organic framework (MOF) was prepared on Ni foam to serve as a self-supported electrode for non-enzymatic glucose detection. Due to the abundant active sites in the MIL-53(NiFe) MOF and its good stability in an alkaline solution, the sensors exhibited a high sensitivity (41.95 mA mM−1 cm−2) and a low detection limit (0.67 μM). Moreover, the molecular sieve effect of the MIL-53(NiFe) MOF led to a remarkable anti-interference ability, even at the interference concentrations of up to 20% glucose, a higher value than that in human serum. In addition, a heat treatment was carried out to remove the residual terephthalic acid in the MOF tunnels, and this promoted the detection linear range to 2–1600 μM. The reusability, reproducibility and long-term stability of the sensors were also studied, and the results implied good practicability of the MIL-53(NiFe) MOF-based sensors. Furthermore, the good practicability of the sensors was verified by testing human serum samples. The results showed the relative standard deviation of 2.73% from the hospital results, and the standard recovery was nearly 100%.
研究领域:
分析化学
·
材料科学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS CHEMISTRY AND PHYSICS
·
2023
·
IF 4.6
Hangxi Liu,Haorong Sun,Ming Fang,Yifeng Zhang,Mingguang Kong,Zhimin Lv,Xiaoli Tan
The evaluation of the concentration of Pb(II) in solution has great significance in avoiding harm to ecology health. In this work, NH 2 -MIL-53(Fe) modified ITO glass (NH 2 -MIL-53(Fe)@ITO) was utilized as an electrochemical sensor for the detection of Pb(II) in solutions. FTIR and XPS investigation disclosed that the plentiful surface –NH group on the NH 2 -MIL-53(Fe) should be responsible for the highly efficient and selective detection abilities of Pb(II) due to the capture and conductivity abilities. The NH 2 -MIL-53(Fe) was prepared by a solvothermal technique and electrophoresed on the surface of ITO glass . A square wave voltammetry (SWV) method is employed for the sensitive determination of Pb(II). The factors of the detection condition such as the pH and ion interference are also studied. The sensitivity of 16.072 μA μM −1 cm −2 in the linear range of 2–4 μM and 54.143 μA μM −1 cm −2 in the linear range of 5–17 μM, and the limit of detection (LOD) of 0.1 μM are acquired. The repeatability and reproducibility are also studied. EIS and Tafel curves are utilized to investigate the effect of temperatures on the properties of the NH 2 -MIL-53. This work presents a facile strategy for the preparation of NH 2 -MIL-53(Fe)@ITO electrochemical sensor via electrolysis, which enhances the sensitivity toward Pb(II) and shows great application potential.
研究领域:
环境科学
·
分析化学
·
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）