文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第961至972个,产品总数347,358个

切换升序
ChemPhysMater · 2026 · IF 5.3

Preparation of ultra-sensitive UV device for nanomolar-level hydrocortisone detection

Tao Zhang,Guishan Tu,Junyu Chen,Jiang Cheng,Lu Li,Guiliang Peng,Wenjing Yang,Jiongyu Hu,Shenghao Wang

The detection of hydrocortisone (cortisol, HC) at physiological concentrations ranging from nanomolar to picomolar levels presents significant technical challenges. Although UV spectroscopy offers rapid and economic analysis, existing detectors lack the necessary sensitivity and exhibit excessive noise for reliable low-concentration measurements. This study introduces an advanced UV photodetector employing a novel vertical architecture of ITO/TiO 2 /Bi 2 O 3 /NiO/AgNWs, enhanced with a pyrolytic hafnium acetylacetonate protective (PHAA) layer. The developed device demonstrates exceptional performance metrics including a detectivity surpassing 1.1×10 11 Jones, an ultralow detection threshold below 1 nW cm −2 , and rapid response times between 9–12 ms. Remarkably, the unencapsulated device maintains outstanding stability with less than 2% performance variation after three months of ambient exposure. Building on this platform, we created an integrated HC detection system that overcomes baseline drift issues through innovative pulse signal design. The system achieves detection limits of 8–16 nmol/L across a broad concentration range, while demonstrating excellent specificity against common interferents (urea, sodium chloride, and other electrolytes) and robust ambient light immunity. These combined advancements establish our photodetector as a transformative solution for next-generation medical HC monitoring systems.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2026 · IF 8.7

Efficient double-stranded hydrolysis of plasmid DNA by molybdenum sulfide quantum dots under mild conditions

Xinyu Zhang,Jiashuo Li,Zhifang Wu,Ziying Yan,Xin Tian,Cuicui Ge

The development of inorganic DNA-cleavage reagents has been an area of active research. However, despite extensive efforts, an efficient method for degrading DNA, such as antibiotic resistance genes (ARGs), has not yet been developed because of its high hydrolytic stability. Herein, we present our results demonstrating that molybdenum sulfide quantum dots (MoS 2 QDs) can effectively catalyze the cleavage and degradation of double-stranded DNA under mild conditions (pH 7.4, 37 °C) without requiring external energy. Notably, structure-activity analysis indicates that the nuclease-mimicking activity of the MoS 2 QDs is attributed to the cooperative effects of their crystal structure (phase), sulfur vacancies (S-vacancies), and Lewis acidity. Superior DNA nuclease activity is achieved in the 1T-phase MoS 2 QDs with a higher density of S-vacancies. Unexpectedly, biochemical assays reveal that MoS 2 QDs cleave DNA through phosphate ester hydrolysis, rather than through reactive oxygen species-mediated oxidation, functioning as DNA hydrolases. Furthermore, we demonstrate that MoS 2 QDs significantly suppress the horizontal transfer of ARGs. This study provides a strategy for designing nanozymes with nuclease activities, advancing their development as a new class of agents for eliminating environmental ARGs and preventing the emergence of resistant bacteria.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
PROGRESS IN ORGANIC COATINGS · 2026 · IF 7.9

Urchin-inspired carbon-based 3D thermally conductive fillers for synergistic improvement of thermal conductivity and corrosion protection in composite coatings

Yine Ren,Yuan Kou,Wen Sun,Lida Wang

The design of coatings that simultaneously exhibit high thermal conductivity and superior corrosion protection performance in extreme corrosive environments has garnered considerable interest in the academic community. However, constructing a continuous phonon conduction pathway within the coatings is extremely challenging. Inspired by the urchin structure, we developed a carbon-based three-dimensional thermally conductive network filler with the urchin-like morphology through a combination of in situ liquid-phase compounding, high-temperature pyrolysis, and self-assembly. This unique three-dimensional interconnected architecture enables continuous phonon conduction pathways that facilitate efficient thermal conduction while simultaneously reinforcing the “labyrinth” effect to suppress corrosive media permeation, thereby overcoming the intrinsic trade-off between thermal conductivity and corrosion protection. The as-prepared composite coating with a filler loading of 10 wt% delivers a 286% enhancement in thermal conductivity compared to the blank novolac epoxy (EPN) coating, while maintaining outstanding corrosion protection performance under harsh corrosive conditions. This research presents a unique method for designing and preparing composite coatings with high thermal conductivity and corrosion protection performance, thereby exhibiting significant potential for waste heat and water vapor recovery.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Polyurethane with high mechanical performance and excellent self-healing efficiency enabled by strain-induced crystallization and multiple hydrogen bonds for human motion sensing

Xiaoyang Zhang,Tian Lan,Hongli Guo,Xin Tian,Tingxuan Duan,Xuhan Kou,Huibin Su,Yiyan Gao,Guanghui Gao

Synergistic reinforcement of self-healing elastomers by strain-induced crystallization and multiple hydrogen bonds. • The elastomer achieves a tensile strength of 52.2 MPa, an elongation at break of 1525.1%, and an toughness of 330.05 MJ/m 3 . • After healing at 60 °C for 24 h, the self-healing efficiencies reached 96.6% for stress and 101.7% for strain. • The fracture energy attained 117.65 kJ m −2 . • The flexible composite sensor exhibits strain-sensing, with GF of 1.71 and 1.87 in the 0–100% and 100–300% strain range. The harsh and complex conditions in practical applications have driven a strong demand for polyurethane (PU) elastomers with self-healing functionality. However, achieving both superior mechanical performance and excellent self-healing ability in a single PU elastomer still poses a significant difficulty. In this investigation, a self-healing PU elastomer (PCL-HMPU) with outstanding mechanical performance was developed. The prepared self-healing PU elastomer demonstrated a superior tensile strength of 52.2 MPa, an elongation at break of 1525%, and an outstanding toughness of 330.05 MJ/m 3 . Specifically, the symmetric Methylene-bis(4-cyclohexylisocyanate) (HMDI) and semi-crystallizable poly(caprolactone) diol (PCL) enable strain-induced crystallization (SIC) under large deformation, thereby providing a self-reinforcement effect. The acylsemicarbazide moieties (ASCZ) and disulfide bonds in 3,3′-dithiobis(propionohydrazide) (DPH) impart the self-healing capability, enabling the elastomer to recover 96.6% of its tensile strength and 101.7% of its tensile strain after 24 h at 60 °C. The amorphous structure of PCL-HMPU facilitates self-healing, while the SIC and ASCZ collaboratively enhances its mechanical performance. Moreover, based on the favorable compatibility between PCL and the ionic liquid, a high-performance ionic skin was fabricated, further highlighting the potential of PCL-HMPU for flexible electronics.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Carbide-induced high dispersion and electronic regulation of Pt species toward stable propane dehydrogenation

Xiaonan Wang,Jiaming Ma,Jun Li,Haoyu Yan,Zhikai Yang,Bo Jiang,Xiao Zhang

α-WC-mediated SMSI constructs robust Pt-WC/β-zeolite catalysts for propane dehydrogenation. • Pt-WC/β-zeolite catalysts deliver enhanced activity and stability relative to conventional Pt/β-zeolite systems. • Interfacial coupling induces Pt electronics and confines Pt nanoparticles, suppressing thermal sintering. • Pt–WC interfaces promote C–H cleavage and inhibit deep dehydrogenation, breaking metal scaling relations. Propane dehydrogenation (PDH) remains a cornerstone route for on-purpose propylene production but is hampered by the trade-off between activity, selectivity, and catalyst stability. Herein, we report a carbide-mediated interface engineering strategy that employs α-WC as an electronic and structural promoter to construct a robust Pt-WC/β-zeolite catalyst via strong metal-support interactions (SMSI). Comprehensive characterizations reveal that α-WC not only spatially confines Pt nanoparticles (~1.8 nm) to prevent sintering, but also induces substantial electronic charge transfer at the Pt-WC interface, which optimizes the d-band structure and modifies the surface adsorption behavior. Benefiting from this dual-function stabilization mechanism, the optimized Pt-WC/β 75 catalyst delivers an enhanced propylene production rate of 17.4 mol·g Pt −1 ·h −1 at 550 °C, with 95% selectivity and a 20-fold lower deactivation constant (0.005 h −1 ) compared to Pt/β 75 . Mechanistic and kinetic analyses, corroborated by DFT calculations, demonstrate that the interfacial electronic coupling facilitates C H bond activation, weakens hydrogen inhibition, and suppresses coke formation. This work demonstrates that carbide-mediated interfacial modulation is an effective strategy for enhancing the durability and selectivity of dehydrogenation catalysts, providing useful insights for developing robust Pt-based systems for light hydrocarbon transformations. Pt–WC/β-zeolite catalysts were developed using carbide-mediated interface engineering, where α-WC stabilizes Pt via strong metal–support interactions (SMSI). This prevents Pt sintering and improves propane dehydrogenation performance. The Pt–WC/β 75 catalyst exhibited high activity, selectivity, and stability, with enhanced C H activation and reduced coke formation. Download: Download high-res image (112KB) Download: Download full-size image

CAS / MDL: 7784-27-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS · 2026 · IF 6.7

Preparation of low-nitrogen bio-oil via biomass pyrolysis over Ni-Co bimetal-modified HZSM-5 catalysts

Hong Tian,Ziwen Zhao,Zhangjun Huang,Yanshan Yin,Song Ren,Shan Cheng

The presence of nitrogen-containing compounds (NCCs) in bio-oil severely limits its downstream utilization as a clean fuel. To address this issue, a catalytic strategy combining hierarchical pore construction and bimetallic active-site modification was developed for the deep denitrogenation and upgrading of biomass pyrolysis oil. Bamboo (BB) and wheat straw (WS) were selected as representative forestry and agricultural residues, respectively, and Ni-Co bimetal-modified HZSM-5 catalysts were prepared. Appropriate alkali treatment significantly improved the pore structure of HZSM-5, increasing its specific surface area from 383.9 to 409.12 m 2 /g, while Ni and Co introduction effectively regulated the distribution of acidic sites. As a result, the modified catalysts enhanced the pyrolysis of BB and WS and improved the quality of the resulting bio-oils. Over 6Ni0.5Co-HR5, aromatic selectivity reached 51.06% for BB and 50.66% for WS. GC/MS analysis showed that the catalyst promoted the transformation of nitrogen species from kinetically unstable chain-like compounds into more stable cyclic structures, facilitating their further removal. Among the catalysts, 6Ni0.5Co-HR5 exhibited the best denitrogenation performance, reducing the relative total nitrogen content in BB- and WS-derived bio-oils to 0.89% and 0.67%, respectively, corresponding to decreases of 96.34% and 93.02% compared with non-catalytic pyrolysis. This superior perf ormance was attributed to the synergistic effect of the hierarchical pore structure and Ni-Co bimetallic sites. The results demonstrate good feedstock adaptability of the catalyst and provide an effective route for producing low-nitrogen, aromatic-rich bio-oil.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Molecular Catalysis · 2026 · IF 4.3

Pd/DUT-5 for mild and selective hydrogenation of nitrile butadiene rubber

Shukang Ti,Dongmei Yue

Pd/DUT-5 is an efficient catalyst for NBR hydrogenation to HNBR. • High hydrogenation activity was achieved under mild conditions. • Metal-support interactions stabilize electron-enriched Pd δ+ species. • Pd δ+ species enhance catalytic activity and chemoselectivity. • DFT reveals low-barrier heterolytic H 2 activation at Pd δ+ –μ 2 O - sites. Hydrogenated nitrile butadiene rubber (HNBR), produced via the selective hydrogenation of nitrile butadiene rubber (NBR), has attracted considerable interest because of its excellent overall performance. However, the development of efficient and selective catalytic systems for NBR hydrogenation under mild conditions remains challenging, particularly when both activity and cost-effectiveness are required. Herein, Pd nanoparticles were immobilized on the Al-based metal-organic framework DUT-5, and the influences of Pd precursor salts and pretreatment conditions on catalytic hydrogenation performance were systematically investigated. The results show that using Pd(OAc) 2 as the precursor in combination with relatively low reduction temperatures promotes the formation and stabilization of electron-enriched Pd δ+ species through metal-support interactions, leading to excellent low-temperature activity and good reusability, with the hydrogenation degree remaining 94.5% after three cycles. Density functional theory calculations using C 2 H 4 as a model substrate further reveal that Pd δ+ sites cooperatively interact with μ 2 O - moieties to facilitate H 2 activation and subsequent hydrogen transfer through a heterolytic cleavage pathway with reduced energy barriers. These results provide a mechanistic basis for the efficient hydrogenation of NBR under mild conditions. Overall, this work demonstrates an effective and economical strategy for HNBR production and offers new insights into the design of highly active and chemoselective catalysts for NBR hydrogenation. Download: Download high-res image (205KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Food Bioscience · 2026 · IF 6.2

Engineering PtTe nanorods with antenna-reactor configuration for synergistic photothermal-colorimetric dual-mode lateral flow immunoassay

Lihong Su,Wenxia Luan,Qin Yang,Jiahui Xu,Leina Dou,Lu Liu,Lei Zhao,Ibrahim A. Darwish,Daohong Zhang

Integrating complementary detection modalities into lateral flow immunoassay (LFIA) promises accurate detection but is often limited by sensitivity. To address this, we engineer a plasmonic-photothermal convergence system based on architecturally defined PtTe nanorods (NRs). Using TeNRs as anisotropic templates, we constructed an antenna-reactor architecture with high-aspect-ratio TeNRs as broadband light-harvesting antennas and PtNPs as photothermal reactors, achieving a photothermal conversion efficiency of 44.06%. Leveraging this integrated colorimetric and photothermal capability, we developed a dual-mode LFIA for the detection of Salmonella typhimurium , with a total assay time of 15 min. The platform achieved a detection limit of 10 3  CFU/mL, representing a 100-fold improvement over conventional AuNPs-based LFIA, and delivered good recoveries ranging from 80.76% to 118.06% in spiked food samples. By enabling simultaneous visual screening and quantitative photothermal confirmation, this dual-readout assay effectively enhances the detection reliability.

CAS / MDL: 10102-20-2 207683-21-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Sustainable Chemistry and Pharmacy · 2026 · IF 6.7

Dual-role deep eutectic solvent engineering in HOF-101 supported molecularly imprinted polymers for enhanced myricetin adsorption

Zhenyu Wu,Zhiwei Ding,Yue Li,Shakeel Zeb,Weibai Bian,Yinhua Jiang,Yan Liu

The efficient capture of myricetin is often challenged by its instability in alkaline environments, which contradicts the alkaline conditions required for traditional boronate affinity materials. To address this, a dual-recognition molecularly imprinted polymer (DMIP) supported on HOF-101 was developed using a deep eutectic solvent (DES)-driven strategy. A dual DES system was employed to achieve synergistic recognition: ternary DES 1 acts as a functional monomer combining boronate affinity and hydrogen bonding, while binary DES 2 serves as a green solvent and porogen. Crucially, the ethylene glycol in DES 2 facilitates “teamed boronate affinity” via B–O coordination, significantly lowering the p K a of boronic acid groups. This mechanism enables efficient specific recognition at pH 6.0, effectively overcoming the limitation of decreased affinity under weakly acidic conditions. The optimized BA-DES/DMIPs exhibited rapid equilibrium (20 min), a high Langmuir maximum adsorption capacity (45.016 mg/g), and excellent stability over five cycles. Furthermore, the material demonstrated superior selectivity against structural analogs and achieved satisfactory recovery rates (99.80%–101.67%) in grape juice, confirming its potential for green and efficient separation in complex matrices.

CAS / MDL: 78-67-1 97-90-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2026 · IF 8.7

Coat protein complex II vesicle transport is involved in tri-o-cresyl phosphate-induced delayed neuropathy

Yanyan Sun,Xiaohua Song,Di Zhang,Dan Yang,Hanqing Jiang,Jun Qiu,Muzi Ge,Yi-Jun Wu

TOCP reduces COPII vesicles in the spinal cord and sciatic nerves of adult hens. • TOCP metabolite CBDP inhibits COPII-mediated ER-to-Golgi trafficking in Schwann cells. • TOCP/CBDP-induced COPII transport defects are involved in ER stress (ERS). • ERS inhibitor 4-PBA partially rescues COPII transport defects and neurotoxic injury. Tri- ortho -cresyl phosphate (TOCP) is an organophosphorus compounds (OP) known to induce delayed neurotoxicity, called OP-induced delayed neuropathy (OPIDN), which involves multiple pathological processes, including degeneration and demyelination of long axons within the spinal cord and peripheral nerves. In this study, we employed the Schwann cell line (sNF96.2 cells) and adult hen, the classical model animal for OPIDN study, to investigat e the mechanism of TOCP-induced myelin damage. The results showed that TOCP (750 mg/kg, p.o.) significantly reduced the number of COPII vesicles in the spinal cord and sciatic nerves of hens; on day 2 after the single exposure, the number of vesicles decreased to 27% and 38% of the control group, respectively, while 4-phenylbutyric acid (4-PBA, 150 mg/kg, i.p.), an inhibitor of endoplasmic reticulum (ER) stress restored them to 80% and 75% of the control group, respectively. In sNF96.2 cells, cresyl saligenin phosphate (CBDP), the active metabolite of TOCP, inhibited COPII vesicle transport from the ER to the Golgi apparatus, reducing the transport rate of ManII-SBP-mCherry from 76% to 38% and the relocation rate of GalNAc-T2-GFP in the Golgi apparatus from 91% to 26%. 4-PBA partially reversed the effects (restoring them to 62% and 72%, respectively). These results suggested that TOCP/CBDP impairs COPII vesicle transport at least partially by activating ER stress, and that impaired vesicle transport may be an important mechanism by which TOCP induces neuropathy. Download: Download high-res image (156KB) Download: Download full-size image

CAS / MDL: 1821-12-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Cleaner Production · 2026 · IF 10.7

In-situ upgrading of waste passenger car tires via molten salt thermal treatment: Effects of particle size and temperature

Yang Ren,Xinhong Yuan,Yang Hu,Hongyun Hu,Kai Jiang,Zhen Wu,Yongxin Duan,Xian Li,Hong Yao

Adaptable molten salt treatment yields similar products from car and truck tires. • Molten NaOH-Na 2 CO 3 enables in-situ upgrading of car tire pyrolysis products. • The absolute content of BTX in tire pyrolysis oil increased by 1.5-2.8 times. • Maximum ash and sulfur removal in tire pyrolysis char reached 71% and 65%. • The H 2 content in the tire pyrolysis gas increased by a maximum of 19 times. Waste passenger car tires present significant recycling challenges due to their low thermal conductivity and high ash and sulfur contents, which frequently result in suboptimal product quality during conventional pyrolysis. To overcome the limitations of complex post-treatment processes, a molten salt thermal treatment method utilizing NaOH-Na 2 CO 3 medium was proposed to achieve the in-situ upgrading of pyrolysis products. In this study, the effects of operating temperature (425-575 °C) and feedstock particle size (6-10 mm) on products were systematically evaluated. Experimental results indicate that the molten salt medium significantly enhanced heat transfer and catalytic cracking, which effectively fixed CO 2 and led to a 19-fold surge in H 2 production, peaking at 5.57 mmol/g. For the liquid-phase products, the introduction of molten salt significantly promoted the dealkylation of substituted aromatics, increasing the benzene concentration by 5.43 to 8.61 times. Furthermore, the molten salt effectively overcame the mass transfer resistance of larger particles, facilitating the extensive formation of monocyclic aromatic hydrocarbons. Notably, at the solid-phase interface, the molten salt acted as an efficient in-situ purifying agent, reacting directly with inorganic impurities (SiO 2 , CaCO 3 ) and sulfides to form highly water-soluble salts. This mechanism achieved a maximum deashing ratio of 71% and a desulfurization ratio of 36.74%, yielding a high-value pyrolytic char with a carbon content exceeding 90%. Overall, this approach demonstrates that the thermal conversion products of low-quality passenger car tires can be significantly upgraded, providing a highly efficient pathway for comprehensive resource recovery. Download: Download high-res image (371KB) Download: Download full-size image

CAS / MDL: 497-19-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2026 · IF 6

Heterointerfacial engineered NdBaCo2O5+δ/BaCo0.8Ta0.2O3−δ composite cathodes with mitigated thermal expansion and accelerated ORR kinetics for IT-SOFCs

Qingyuan Sheng,Jiahui Zhu,Xiaofei Zhu,Qiwei Chen,Shangyu Li,Wenfu Yan,Defeng Zhou,Jinghe Bai

Improving the oxygen reduction reduction activity and thermal stability of cathode materials is critical to advancing the commercialization of intermediate-temperature solid oxide fuel cells (IT-SOFCs). In this study, a high-performance mixed ionic-electronic conductor (MIEC) BaCo 0.8 Ta 0.2 O 3-δ phase is incorporated into the lattice of NdBaCo 2 O 5+δ (NBC) double perovskite. Such composite construction elevates the oxygen vacancy concentration, lowers the thermal expansion coefficient (TEC) of NBC-based materials, and simultaneously improves electrocatalytic activity and long-term operational durability of IT-SOFCs. By fitting the distribution of relaxation times, it is concluded that the composite cathode material (NBC&BCT2) significantly accelerates the oxygen dissociation and adsorption kinetics compared with NBC. At 700 °C, the symmetric cell with NBC&BCT2 exhibits an area-specific resistance of only 0.034 Ω cm 2 , approximately 23% of that of NBC. When used as the cathode in IT-SOFCs, the NBC&BCT2-based cells achieve a maximum power density of 1.01 W cm 2 at 700 °C, which is 1.4 times higher than that of NBC. Furthermore, composite modification with BCT alleviates the long-term stability drawbacks originating from the excessively high TEC of Co-based materials. Single cells equipped with NBC&BCT2 maintain stable operation over 100 h under a constant rated voltage, with an output current density 1.5 times higher than that of NBC-based cells. This work establishes a reliable modification strategy to promote the electrocatalytic performance of Co-based perovskites and resolve stability limitations induced by high TEC.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。