CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Da-Yuan Wang,Jing Li,Xiao-Han Tian,Siyu Zhang,Yao Chen,Feihe Ma,Henk.J. Busscher,Jing Shen,Linqi Shi
Light-activatable CO-generating molecules such as 3-hydroxyflavone (3-HF) derivates, are water-insoluble, which limits their applicability for infectious biofilm control. Here, a 3-HF-modified type of D-alanine (3-HFD) was coupled with hexadecyltrimethylammonium-bromide (CTAB) to self-assemble into water-suspensible, hydrophilic nanoparticles. Self-assembled 3-HFD nanoparticles did not generate CO upon visible-light irradiation, but dynamically disassembled upon metabolic-incorporation in bacterial cell-wall peptidoglycan of Gram-positive and Gram-negative periodontal pathogens, leaving molecular 3-HFD inside the cell-wall that generated CO upon visible-light irradiation. In vitro , visible-light irradiation of aerobic Staphylococcus aureus and anaerobic Porphyromonas gingivalis biofilms in presence of 3-HFD nanoparticles yielded CO-generation with strong antibiofilm activity under atmospheric oxygen conditions and in a nitrogen atmosphere. 3-HFD nanoparticles were subsequently applied for treatment of ligature-induced periodontitis in specific-pathogen-free rats with P. gingivalis inoculated, periodontal pockets. Irrigation with nanoparticle suspensions and visible-light irradiation of P. gingivalis infected periodontal pockets was demonstrated to yield in-pocket CO-generation. CO-generation improved bone-regeneration, modulated macrophages to attenuate immune-inflammation and reduced P. gingivalis colony-forming-unit counts, while hardly affecting total colony-forming-unit counts. This points to selective elimination of CO-susceptible pathogens and restoration of a healthy periodontal microbiome, as confirmed using 16S rRNA microbiome analyses. Herewith, an effective, non-surgical and non-antibiotic based three-in-one CO-based treatment of periodontitis is proposed.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Xia Wei,Pengcheng Huan,Xiaming Chen,Guang Ji,Song Li
The interfacial electron interactions in heterogeneous catalysts are critical determinants of their catalytic efficiency. In this study, a Ni-Co alloy coating with a precisely controlled Ni/Co of 6:4 was synthesized on nickel foam (denoted as Ni-Co-6–4/NF) using NaH 2 PO 2 as a reducing agent. The resulting surface exhibited negligible phosphorus incorporation. The Ni-Co-6–4 coating featured a unique crystalline-amorphous interfacial structure. As expected, Ni-Co-6–4/NF demonstrated outstanding catalytic activity toward hydrazine oxidation, achieving a current density of 169.1 mA·cm −2 at 0.3 V versus the reversible hydrogen electrode (RHE) without i R compensation. Moreover, it maintained 100 % of its catalytic performance over 24 h of continuous electrolysis, placing it among the most durable non-noble Ni-based electrocatalysts reported for hydrazine oxidation. Density functional theory (DFT) calculations revealed that this improved performance stems from electron redistribution at the crystalline-amorphous interface, which enhances N 2 H 4 adsorption. These findings highlight the effectiveness of crystalline-amorphous interface engineering as a powerful strategy for the rational design and optimization of high-performance electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Haiyan Chen,Haibo Xu,Yeyin Li,Zhibin Li,Xin Wang,Bo Jiang,Rongshun Lai,Wenbin Fan,Chuntao Xiang,Zhi Yang,Xiao Chi,Qiang Ma
Selective chlorination has been proven to be an energy-efficient and environmentally friendly method for recycling rare earth elements (REEs) from Nd-Fe-B waste. However, little attention has been paid to the in-depth study of Nd-Fe-B sludge chlorination until now. In this work, four isoconversion methods combined with an unreacted shrinkage core model were employed for the first time to investigate the kinetic behavior of the chlorination reaction between FeCl 3 and Nd-Fe-B sludge. Through thermodynamic calculations, TG-DSC, SEM-EDS, and XRD analysis, the chlorination process and phase transformation behavior of Nd-Fe-B sludge were elucidated. The results show that under optimal conditions (350 °C, FeCl 3 /RE=3:1, 2 h), the RE components in Nd-Fe-B sludge are selectively chlorinated to RECl 3 , avoiding the formation of REOCl, while the iron components primarily exist in the leaching residue as Fe 2 O 3 or FeOCl. And 97.32 % of REEs are selectively extracted into the leachate, while the iron leaching rate is only 4.02 %. Besides, the STA method is the most accurate, yielding E α-STA and A values of 75.01 kJ/mol and 2.6 × 10 6 min −1 , respectively. The reaction control mechanism was analyzed in three steps. In Step 1 (0.05 < α < 0.63) and Step 2 (0.63 < α < 0.75), the diffusion reaction mechanism controls the overall reaction, In Step 3 (0.75 < α < 0.95), the nucleation reaction takes over the control, which provides a good explanation for the change in E α-STA . However, the control step of the entire chlorination reaction is dominated by the internal diffusion process.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2025
·
IF 9
Cuijing Liu,Mengtian Bai,Lei Li,Jinhui Zhang,Binyou Zhao,Caimei Wu,Zhifei Sun,Xihong He,Linbo Li,Lianshan Li
Efficient ion-selective membranes are critical for numerous industrial applications, yet achieving simultaneous cation and anion separation remains a significant challenge. Tröger's base (TB) materials, featuring angstrom-scale channels, have emerged as a promising platform for precise ion separation. Herein, two trifunctional monomers, 1,3,5-tris(4-aminophenyl) benzene (TPB) and tris(4-aminophenyl) amine (TPA), were selected to fabricate crosslinked TB membranes. By tuning the TPA doping ratio (0, 50, 100 mol%), three distinct membranes (TPA0, TPA50, TPA100) with progressively reduced pore apertures were fabricated, owing to the more compact molecular architecture of TPA relative to TPB. As a result, TPA100 demonstrates a 4.8-fold enhancement in Li + /Mg 2+ selectivity (157 vs 33) compared to TPA0, along with universal mono-/divalent cations differentiation. Simultaneously, the near-electroneutral channels endow TPA100 with exceptional anion sieving capabilities, achieving high selectivity of 260 for OH − /WO 4 2− . This work not only elucidates the structure-property interplay in TB membranes but also establishes a versatile paradigm for advanced membranes capable of simultaneous cation and anion separation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Feng Zhu,Haibin Niu,Xiaoming Li,Shaoqing Zhang,Xiutao Yang,Hongwen Yu,Guopeng Zhu
Hydrogen production via photocatalytic water splitting holds great promise for efficient solar energy conversion. While ZnIn₂S₄ (ZIS) exhibits a suitable band structure for visible-light-driven hydrogen production, its practical application is significantly limited by low charge separation efficiency and poor stability. This work pioneers an acousto-hydrothermal strategy utilizing high-frequency ultrasonic atomization to synthesis structurally optimized ZIS. Systematic characterization reveals that ultrasonic cavitation compresses crystal lattices to enhance Zn 3d-S 3p orbital hybridization, assembles nanosheets with a 20 % increased surface area, leading to enhanced charge separation efficiency. The optimized ZIS demonstrates significantly enhanced photocatalytic activity and stability. It achieves a remarkable hydrogen evolution rate of 51.8 mmol g⁻¹ h⁻¹ under 455 nm visible light irradiation, representing an 86 % improvement over pristine ZIS. After a 15 h reaction, the catalytic system produces 8.3 mmol of H₂ (185.9 mL at standard conditions). This work presents an innovative strategy for designing nanosheet-based materials to achieve high-efficiency photocatalytic hydrogen evolution.
✓ 已验证
产品关联
DOI
高影响因子
RENEWABLE ENERGY
·
2025
·
IF 9.1
Haiqing Sui,Geng Li,Jianfeng Chen,Guihao Wu,Hao Jiang,Wei Cheng,Hanping Chen
Combustion is one of the main sources of particulate matter (PM) emission during the biomass utilization, while the effects of three components, namely cellulose (CL), hemicellulose (HC), and lignin (LG), are still unknown. In this work, the model compounds were used to simulate the three components of cornstalk (CS), and their interactions on the PM emission behavior during the individual or co-combustion were investigated. Meanwhile, three different potassium-containing compounds were introduced to simulate the reactions between three components and alkali metals. The results showed all particle size distribution curves from the combustion of three components exhibited a unimodal distribution, while CS presented a bimodal distribution. The total PM 10 yields from the combustion of CL, HC, and LG are 0.32, 0.65, and 5.27 mg/g_fuel, much lower than that from cornstalk combustion (10.04 mg/g). The interaction between CL and HC could facilitate the formation of PM 0.1 and increase its yield by 4.93%. In contrast, the interaction between HC and LG was conducive to reducing PM 1 by 13.2%. However, the interaction between CL and LG has little impact on PM emission. The types of potassium salts had a significant impact on PM formation, and K 2 SO 4 , CH 3 COOK, and KCl could inhibit the PM emission, achieving a 9.4%–13% reduction compared to the theoretical value.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Shiyu Jia,Lei Zha,Xiangbo Zhao,Shouli Bai,Ke Tian,Yongjun Feng
Based on the advantages of low cost, photoelectrochemical stability and non-toxicity of BiVO 4 , we prepared BiVO 4 photoanode by the classical electrodeposition method and grew Bi 2 S 3 in situ relying on its own bismuth source to construct a type-II heterojunction. The BiVO 4 /Bi 2 S 3 /rGO ternary photoanode exhibits excellent PEC performance under the synergistic effect of rGO modification and heterojunction. The results show that the photocurrent density of the BiVO 4 /Bi 2 S 3 /rGO photoanode at 1.23 V vs RHE reaches 2.40 mA·cm -2 , which is 3.4 times higher than BiVO 4 (0.70 mA·cm -2 ), the onset potential is negatively shifted by 140 mV compared with BiVO 4 , and the highest IPCE and ABPE efficiencies reach 39.68% and 0.24%, respectively, while the charge transfer resistance R ct was reduced to 163 Ω. The enhancement is attributed to the construction of the heterojunction and its synergistic effect with rGO, which is from extending the visible light absorption of the photoanode, promoting the effective separation of carriers, and accelerating of interface charge transfer as well as providing more active sites for water oxidation.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Cleaner Production
·
2025
·
IF 10
Yuan Zhang,Xinru Ding,Wentao Bi
This study overcomes the limitations of traditional biomass carbonization, which typically requires high temperature, high pressure, or toxic solvents, by introducing a green strategy for synthesizing carbon-rich materials (deep eutectic system-derived biochar, DESysChar). In this approach, monosaccharides were used as carbon sources and converted into DESysChar within a deep eutectic system (DESys) under optimized mild conditions (HBA:HBD = 1:2, 150 °C, 3 h, solid-to-liquid ratio of 1:5). This work not only pioneers the exploration of the carbonization mechanism of monosaccharides in DESys but also highlights the efficient application of DESysChar in organic dye adsorption, with yield and adsorption capacity serving as key evaluation criteria. Comprehensive characterization of the DESysChars was performed using various analytical techniques, and the carbonization mechanism was elucidated through Fourier-transform infrared spectroscopy (FTIR), zeta potential measurement, X-ray photoelectron spectroscopy (XPS), and theoretical calculations. Kinetic and isotherm studies showed that the adsorption data conformed well to pseudo-second-order kinetics and the Langmuir isotherm model. The resulting DESysChar exhibited a high content of oxygen-containing functional groups, demonstrating a strong affinity for methylene blue (MB) with a maximum adsorption capacity of 259.98 ± 0.74 mg/g. Additionally, the material showed good selectivity for cationic dyes and excellent reusability. These results provide valuable insights into the green synthesis of carbon-rich materials and the underlying mechanisms of carbonization in DESys.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CONTROLLED RELEASE
·
2025
·
IF 11.5
Hui Wang,Cui Tang,Hanfeng Zhang,Lina Guo,Chan Zou,Shengting Zhang,Jinlong Liu,Qianping Huang,Yujun Liu,Wenhu Zhou,Guoping Yang,Xiang Gao
Intracellular protein therapeutics offer great promise for treating diseases involving intracellular targets, yet their clinical translation remains limited by inefficient delivery systems. Here, we report the development of a simple, versatile, and biocompatible protein delivery platform based on tea polyphenol nanoparticles (TPNs) formed via the oxidative self-polymerization of epigallocatechin gallate (EGCG). Through noncovalent interactions between EGCG and proteins, TPNs enable efficient encapsulation of proteins with diverse molecular weights and isoelectric points under mild conditions. Using urate oxidase (UOx) as a model therapeutic protein, we demonstrate that TPNs protect UOx from enzymatic degradation, preserve its native structure and enzymatic activity, and achieve effective cytosolic delivery via glutathione-triggered release. In disease models of hyperuricemia and gouty arthritis, TPNs/UOx significantly prolonged UOx circulation, lowered serum uric acid levels, reduced joint inflammation, and improved liver and kidney function, with favorable biocompatibility. This work establishes TPNs as a versatile and stimuli-responsive platform for intracellular protein delivery, offering new strategies for the clinical application of protein therapeutics.
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Xinyi Li,Jing Li,Xingqi Han,Daoxiong Wu,Tianjiao Wang,Wenjuan Shi,Zhenye Kang,Xinlong Tian,Weiting Yang,Yuliang Yuan
The lattice oxygen mechanism (LOM) is recognized as a kinetic-favored pathway for oxygen evolution during water oxidation. However, the imbalance between lattice oxygen consumption and regeneration limits the long-term stability and lifespan of electrocatalysts. In this study, we present a CoFeHoO catalyst characterized by enhanced OH adsorption at oxygen vacancy sites, which facilitates the regeneration of lattice oxygen and consequently improves durability. Using isotope-labeled ( 18 O) in situ differential electrochemical mass spectrometry (DEMS), pH-dependent oxygen evolution kinetics, and TMA + probing, we demonstrate that the incorporation of Ho into CoFe oxyhydroxide enhances oxygen regeneration during the LOM cycle. In situ Fourier-transform infrared spectroscopy (FT-IR) and density functional theory (DFT) calculations further confirmed the improved OH adsorption energy at the oxygen vacancy sites on the CoFeHoO slab. This work offers a rational design strategy for developing highly efficient LOM-based electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
BIOSENSORS & BIOELECTRONICS
·
2025
·
IF 10.5
Yunlu Wang,Zhenning Xie,Dongsheng Liu,Zihang Cheng,Qingyang Feng,Bo Wang,Zida An,Hu Deng,Yupeng Mao
This study develops a polyvinyl alcohol hyperstretchable cellulose-based hydrogel triboelectric nanogenerator (PH-TENG) for non-invasive cardiovascular monitoring. The device fabrication utilizes polyvinyl alcohol and hydroxyethyl cellulose, with performance optimization achieved through synergistic material and architectural design. Experimental characterization reveals the PH-TENG exhibits high sensitivity (0.543 kPa −1 ) and rapid response time (41 ms), enabling precise arterial pulse wave detection with clear characteristic peak resolution. The proposed monitoring strategy integrates pulse wave signals from multiple arterial sites, employing peak interval difference extraction for cardiovascular assessment. Comparative validation demonstrates strong correlation between PH-TENG-derived heart rate data and commercial motion sensor measurements. Implementation of Binary Generalized Linear Model Logistic Regression yields 100 % accuracy in distinguishing subjects’ heart rate pulses pre-exercise and post-exercise. The developed Health Monitoring and Assessment System (HMAS) demonstrates reliable performance for long-term cardiovascular monitoring. This work provides an effective solution for non-invasive, multi-parametric physiological monitoring, establishing a technological foundation for cardiovascular disease diagnosis and prevention. The system shows potential for applications in personalized healthcare and smart sports monitoring.
✓ 已验证
产品关联
DOI
高影响因子
Frontiers in Microbiology
·
2025
·
IF 4.5
Lihua Zhao,Lei Jin,Yunhe Fu,Bin Yang
Background: Indole-3-propionic acid (IPA) is a tryptophan metabolite produced by intestinal bacteria, which has functions such as penetrating tissue barriers and reducing tissue inflammatory reactions. In the present study, the therapeutic effect of IPA on Staphylococcus aureus (S. aureus)-induced mastitis was investigated.Methods: A mouse model of mastitis was established using breast injection of S. aureus. Except for the control group, all other mice were given oral administration of IPA. Hematoxylin eosin (H&E) staining was used to detect pathological changes in mouse mammary tissue. ELISA was used to detect TNF-α and IL-1β levels. Western blot was used to detect protein expression.Results: As the results demonstrated, IPA treatment obviously attenuated S. aureus-induced mammary pathological injury, myeloperoxidase (MPO) activity, malondialdehyde (MDA) content, TNF-α, and IL-1β levels. Meanwhile, IPA treatment could restore blood-milk barrier, as confirmed by up-regulating the expression of ZO-1 and occludin. In vitro, IPA could inhibit TNF-α and IL-1β production and the activation of NF-κB and NLRP3 induced by S. aureus. Furthermore, IPA could increase the expression of aryl hydrocarbon receptor (AhR). In addition, the inhibition of IPA on S. aureus-induced inflammation was reversed by AhR inhibitor.Conclusion: In conclusion, the results suggested that IPA inhibited S. aureus-induced mastitis through inhibition inflammation and restoring blood-milk barrier by activating AhR.
✓ 已验证
产品关联
DOI
PubMed
高影响因子