Advanced Materials Technologies
·
2026
·
IF 6
Yanghuan Mao,Zhuoyun Liu,Chun Wang,Yuxin Peng,Aijia Ren,Cairong Liu,Muxi Ai,Tianhong Zhu,Pengfei Lian,Wu Bin Ying,Zhe Yu
Flexible hybrid electronics (FHEs) have widespread potential applications in wearable sensing, in particular for practical monitoring of human pulses. However, FHEs suffer from insufficient conformation with complex and dynamic skin surfaces. Resulting motion artifacts severely limit the long-term reliability of pulse monitoring under various exercise conditions. This underscores the importance of developing system-level mechanical stretchability. Herein, we propose a technical route to fabricate intrinsically stretchable hybrid electronics via liquid metals (LMs) patterning. Taking advantage of the selective wettability and microoxidation of LMs, a semicured polymer is used as a soft transfer medium to achieve high-fidelity LMs patterning at a device yield of 96.3%, with the resolution of 100 µm. Importantly, this method can be scaled up through compatibility with mature roll-to-roll flexible circuit printing technology. Our method enables the fabrication of stretchable FHEs, which can form a conformal interface with the skin and undergo adaptive deformation during motion (sitting, walking, and running), allowing real-time accurate acquisition of pulse signals by photoplethysmographic sensing. Our work provides a robust technical pathway for advancing FHE systems and boosts the development of wearable pulse monitors.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Materials Technologies
·
2026
·
IF 6
Tengteng Gao,Jianan Ma,Haiwang Zhang,Jiahui Zhang,Qian Zhao,Bo Ma,Deyu Kong,Hongtao Wang,Hui Gao,Xiuyan Fu,Shengbo Sang
Flexible strain sensors capable of detecting subtle human movements are pivotal for advancements in human-machine interaction and virtual reality technologies. However, achieving high sensitivity, a broad sensing range, and system-level integration simultaneously remains a formidable challenge due to the inherent trade-off between electrical conductivity and mechanical deformability. Herein, a high-performance 3D-printed flexible strain sensor based on a synergistic MXene/carbon nanotube (CNT)/Ecoflex nanocomposite is reported. By coupling a microscopic MXene/CNT bridging network to mitigate irreversible nanosheet restacking with a macroscopic 3D-printed stress-dissipating architecture, the inherent conflict between electrical conductivity and mechanical deformability is successfully reconciled. This synergistic design endows the sensor with high linearity ( R 2 = 0.99), a broad sensing range (up to 80%), and exceptional durability (>1000 cycles). This proof-of-concept system integrates STM32-based acquisition with dynamic visualization. Results confirm its stable low-latency performance in motion mapping, validating the hardware-software co-design approach for future integrated wearable electronics.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Chemistry
·
2026
·
IF 7.4
Mingjun Cui,Shijun Huang,Jiate Xue,Xinyu Chen,Siming Ren
2D nanocontainers are prepared with barrier, corrosion inhibition and monitoring. • BZ-P/EP coating shows higher .|Z| f = 0.01 Hz of 4.1 × 10 10 Ω cm 2 after 60 days immersion. • PH-responsive ZIF-8 enables the rapid release of Phen under acidic conditions. • Visual corrosion warning is achieved via Fe 2+ –Phen coordination. To overcome the limitations of conventional anticorrosion coatings, which typically exhibit single functionality and lack early-stage corrosion warning capability, this study presents the design and fabrication of a two-dimensional intelligent nanocontainer system. Specifically, a pH-responsive zeolitic imidazolate framework (ZIF-8) was grown in situ on hexagonal boron nitride (h-BN) nanosheets, and subsequently loaded with 1,10-phenanthroline (Phen), enabling the integration of physical barrier protection, active corrosion inhibition, and visual corrosion monitoring. UV–vis absorption spectra and electrochemical impedance spectroscopy (EIS) results demonstrate that the BZ-P nanocontainers not only provide effective corrosion inhibition but also exhibit rapid, pH-triggered release of Phen in mildly acidic conditions. After incorporation into an epoxy matrix, the resulting BZ-P/EP composite coating exhibits a high low-frequency impedance modulus (|Z| f = 0.01 Hz ) of 4.1 × 10 10 Ω cm 2 after 60 days of immersion in 3.5 wt% NaCl solution, which is approximately 2270 times higher than that of the neat epoxy coating. This improvement is accompanied by a significant reduction in oxygen content on the underlying steel surface (from 19.56 wt% to 0.62 wt%), indicating markedly suppressed corrosion. Under damaged coating conditions, the BZ-P/EP system maintains effective corrosion protection, as evidenced by a relatively high impedance modulus and low local admittance. This enhanced performance can be attributed to the synergistic effects of BN and ZIF-8, which combines structural barrier reinforcement with active corrosion inhibition. Furthermore, the released Phen molecules at damaged sites coordinate with Fe 2+ ions to form a red complex, enabling rapid and intuitive visual detection of corrosion initiation. This work provides a novel strategy for developing intelligent coating systems that integrate corrosion protection, active corrosion inhibition, and real-time monitoring, offering significant potential for applications in harsh service environments.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Zilin Wang,Peng Tan,Boyan Wang,Yiwei Zou,Wenxi Gu,Jiuhong Yi,Qingwen Guan,Changhong Linghu,Songnan Qu,Bingpu Zhou,Iek Man Lei
Stretchable devices have driven technological advances across diverse fields, including medical sensing, electronic skins, and soft robotics. However, achieving high-performance stretchability often depends on toxic manufacturing, costly syntheses, and petrochemical materials, which conflict with sustainability goals. Here, we present a highly stretchable yet entirely natural biogel fabricated through a simple and environmentally benign process. Despite being derived from low‑cost, food‑grade, and fully biodegradable constituents, our biogel integrates dense intermolecular interactions to achieve a combination of top-performing attributes, including stretchability (∼700%), Young's modulus (∼1.3 MPa), fracture strength (∼2.8 MPa), burst pressure (∼900 mbar), ionic conductivity, and optical transparency. Its mechanical properties remain stable even after 30 days and in subzero temperatures. We showcase its versatility in various applications that demand high stretchability, including deformable sensors for falling object detection, smart electronic fibers for sign language detection, stretchable pneumatic grippers for handling fragile objects, and crawling robots that can serve as plant seed carriers. Our biogel offers a low-cost, sustainable alternative to traditional petrochemical-derived elastomers, opening new possibilities for transient, biodegradable soft devices.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED ENGINEERING MATERIALS
·
2026
·
IF 3.6
Xianghong Xiao,Lejian Chen,Jingyuan Zhang,Hongyu Chen,Ruiqi Shen,Lizhi Wu
The advancement of 3D printing has provided critical technical support for the application of energetic materials. However, existing energetic materials are confronted with limitations in manufacturing and practical application, as challenges in achieving high sensitivity and high loading have not been fully addressed. To address this issue, a novel ink formulation was developed using fluorinated ethylene propylene copolymer (FEP) as the oxidizer. Energetic sticks loaded with 90 wt% aluminum/fluorinated ethylene propylene (Al/FEP) were fabricated via direct ink writing (DIW) and featured an Al content gradient ranging from 40 wt% to 80 wt%, using polyvinylidene fluoride (PVDF) as the binder. The results indicate that a porous microstructure is exhibited by these sticks. The 50 wt% Al/50 wt% FEP/PVDF (AFP-50) energetic stick exhibited optimal combustion performance under anaerobic conditions, characterized by a peak pressure of 472 kPa, a pressurization rate of 49.0 kPa/ms, a burning rate of 68 mm/s, and a combustion heat of 8410 J/g. Notably,compared to Al/PTFE/PVDF, which exhibits superior combustion and heat-release performance, the AFP-50 energetic stick exhibited an 8.5% increase in combustion heat and a 41.4% increase in burning rate. Moreover, the energetic stick exhibited different exothermic combustion reaction mechanisms under different atmospheric conditions. This study expands the application prospects of Al/high-fluorine polymer composites in microenergetic devices.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Materials Interfaces
·
2026
·
IF 4.5
Chunmin Jia,Yimin Lei,Hong Xu,Xin Meng,Yuxiang Wei,Peixian Li,Xiaohua Ma,Yue Hao,Xiaohui Jia
Programmed death-1 (PD-1) is a key biomarker for monitoring therapeutic response and resistance in non-small cell lung cancer (NSCLC) immunotherapy. Achieving highly sensitive, real-time detection of PD-1 is crucial for early prediction of treatment resistance and disease recurrence. However, current methods such as ELISA suffer from limitations in sensitivity, speed, and cost. To address these challenges, we develop a label-free biosensor based on semiconducting single-walled carbon nanotube field-effect transistors (CNT-FETs). The sensing interface is designed by wrapping s-SWCNTs with poly[9-(1-octylnonyl)-9H-carbazole] (PCz), enabling immobilization of anti-PD-1 antibodies via cation-π interactions. XPS analysis confirms antibody immobilization via reversible binding energy shifts in C 1s and N 1s spectra upon salt treatment, consistent with cation-π interactions, further validated by NaCl and imidazole competition assays. Using this strategy, the sensor achieves a detection limit of 8.39 fg/mL for murine PD-1—three orders of magnitude lower than ELISA, along with good specificity and favorable regeneration capability. In human serum, it shows promising performance, with 12 out of 14 NSCLC patient samples (85.7%) exhibiting good linear correlation. With rapid response, low cost, and simple operation, this platform offers a reliable strategy for point-of-care PD-1 monitoring during NSCLC immunotherapy.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Jialing Zhuang,Shunyu Chen,Xiufeng Xiao
3D-printed gelatin scaffolds are widely explored for bone regeneration due to their excellent biocompatibility and biodegradability, yet their clinical translation is severely hindered by several inherent defects, including weak mechanical stability, fast in vivo biodegradation, limited osteogenic capability, and the absence of anti-infective functions. Globally, it remains a key challenge in bone tissue engineering to develop integrated scaffold systems that simultaneously satisfy mechanical matching, long-term biological activity, and anti-pathogenic requirements. To address this challenge, a multifunctional CHm/PCA/Cu 2+ /ε-PL@Gel-OCS scaffold with enhanced mechanical properties, outstanding antibacterial, anti-inflammatory, pro-vascularization and osteogenic activities was developed via cryogenic 3D printing of a gelatin (Gel)/oxidized chondroitin sulfate (OCS) composite ink loaded with chitosan microspheres surface-functionalized by protocatechuic aldehyde (PCA), copper ions (Cu 2+ ) and ε-polylysine (ε-PL). Scanning electron microscopy and energy-dispersive X-ray analysis confirmed uniform dispersion of the microspheres and sustained release of therapeutic agents as the scaffold degraded. Rheological and mechanical testing demonstrated excellent print fidelity, interconnected porosity (161 ± 37 μm pores), and compressive strengths (100–200 MPa) suitable for cortical bone repair. Such porous structure and mechanical performance are highly compatible with human cortical bone microenvironment, which facilitates cell infiltration, nutrient exchange and mechanical load bearing. In vitro release studies revealed a sequential sustained release profile (OCS > Cu 2+ > ε-PL), ensuring a sustainable osteogenic, angiogenic, anti-inflammatory and antibacterial activity. The scaffold achieved 100% bactericidal efficiency against both Staphylococcus aureus and Escherichia coli , suppressed protein denaturation (anti-inflammation), and promoted neovascularization in a chick chorioallantoic membrane assay. Biocompatibility assays using MC3T3-E1 osteoblasts showed enhanced cell adhesion, proliferation, and live/dead viability over 5 days. Osteogenic potential was significantly elevated on the multifunctional scaffold, as evidenced by time-dependent increases in ALP activity, mineral deposition (Alizarin Red S), and upregulated expression of ALP, RUNX2, OPN, and OCN genes compared with Gel and Gel–OCS controls. Taken together, our cryogenic 3D-printed Gel-OCS scaffold incorporating PCA/Cu 2+ /ε-PL-functionalized chitosan microspheres provides a single-step, customizable platform that combines robust mechanical properties with multi-modal therapeutic functionalities. Different from conventional single-function bone scaffolds reported in most international studies, this multi-component synergistic design successfully realizes the integration of mechanical reinforcement, antibacterial, anti-inflammatory, vascularization and osteogenesis functions in one system. These promising preclinical results highlight a novel therapeutic strategy for bone defect regeneration, it solves the common bottlenecks of traditional gelatin-based bone scaffolds, provides a feasible and universal fabrication strategy for high-performance multifunctional bone repair materials, and offers new insights for the global development and clinical translation of 3D-printed bone tissue engineering scaffolds.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Xin Wang,Xiaoming Chen,Baichuan Wang,Qingyuan He,Pengsong Sun,Kewei Su,Dongchen Zhao,Runlang Li,Chenghao Zhang,Feihu Shan,Jie Zhang,Jinyou Shao
Developing lightweight electromagnetic wave absorbers with broadband attenuation remains challenging due to the intrinsic conflict between impedance matching and attenuation capacity. Although multiscale architectures offer a theoretical pathway to resolve this dilemma, their realization is constrained by conventional aerogel processing, particularly by limited molding precision and the difficulty in forming complex curved structures. Here, we report a 3D printing-assisted double-sacrificial templating strategy for fabricating multiscale hierarchically architected graphene aerogels (HAGAs), enabling high-fidelity shaping of spatially intricate curved geometries at a feature resolution of approximately 150 µm. This approach integrates macroscopic gradient gyroid topologies with microscopic aligned cellular networks, thereby reconciling the impedance-attenuation trade-off. Specifically, the gradient topology optimizes impedance matching, whereas the aligned skeleton promotes multiple reflections and conductive dissipation. The optimized gradient HAGA achieves an ultra-broad effective absorption bandwidth of 9.25 GHz and a minimum reflection loss ( RL min ) of −62.42 dB at an ultra-low density of 13.82 mg cm −3 . Compared with its unstructured counterpart (5.41 GHz and −12.16 dB), this architecture delivers a 70.98% bandwidth expansion and a 50.26 dB lower RL min , alongside a 60% mass reduction. This work presents a scalable strategy for fabricating multiscale lightweight architectures with complex geometries, offering broad potential for stealth applications.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Zhiwei Liu,Huiqi Ge,Zhiqin Cao,Bowen Li,Rui Yu,Boya Wang,Heng Su,Lina Yue,Junxian Hou,Qian Xu
O3-type Ni-Mn-based layered oxides as cathode materials have received much attention due to their high theoretical capacity in sodium-ion batteries (SIBs). However, the occurrence of irreversible phase transition during the charge-discharge process will lead to poor structural stability and cycling performance. Herein, a high-entropy layered oxide of Na 0.85 Ni 0.25 Cu 0.12 Ti 0.15 Li 0.08 Ca 0.02 Fe 0.15 Mn 0.31 O 2 (NCFMTLC-1) was prepared by optimizing the ratio of Fe to Mn. It is found that Fe element plays a significant role in the optimization of crystal lattice and the regulation of configurational entropy, improving the cycling and rate performance of materials. In-situ X-ray diffraction combined with DFT calculations reveal that NCFMTLC-1 exhibits superior structural stability with minor reversible phase transition during charge/discharge processes, in stark contrast to its Fe-free counterpart. Therefore, the prepared NCFMTLC-1 cathode demonstrates impressive rate performance (discharge capacity of 96.1 mAh/g at 5C) and cycling stability (83.4% capacity retention after 400 cycles). This work demonstrates that adjusting Fe/Mn ratio is an effective strategy to improve the electrochemical properties of high-entropy materials, offering valuable guidance for the future design of advanced cathode materials for SIBs.
✓ 已验证
产品关联
DOI
高影响因子
ULTRASONICS SONOCHEMISTRY
·
2026
·
IF 10.2
Shuang Jiang,Shulu Zhang,Jingting Han,Zheng Feng,Yeqing Xu,Yao Shen,Yinze Zhong,Xinhui Huang,Ruichen Gao,Xinran Yu,Qingxia Wang,Xiaotian Wu,Lin Wei,Meiting Jiang,Zhibin Wang,Xiaotong Wang,Chunli Gan,Chunjuan Yang
The high-value utilization of underutilized plant resources and waste materials is of considerable significance for the sustainable resource development, agricultural by-product valorization, and the circular economy. In this study, machine learning was integrated with natural deep eutectic solvent (NADES), using Syringa oblata Lindl ( S. oblata ) leaf residue polysaccharides (SOLP) as a case study, to establish a green and efficient ultrasound-assisted NADES extraction strategy. Based on multiple machine learning models, the polysaccharide extraction yield and key process parameters were accurately predicted and optimized. The optimal extraction conditions predicted by the model were as follows: NADES water content of 51.4%, NADES to S. oblata leaf residue ratio (DSR) of 42.9 mL/g, ultrasonic time of 41.7 min, and ultrasonic power of 250.0 W. Among the machine learning models, the XGB model exhibited the highest prediction accuracy (test set, R 2 > 0.92). SHAP analysis further revealed that DSR, water content, ultrasonic time, and ultrasonic power contributed 58.57%, 21.31%, 12.82%, and 7.29% to the polysaccharide yield, respectively. Density functional theory (DFT) calculation was performed to further explore the NADES extraction mechanism. The results demonstrated that the binding energy between NADES-6 and SOLP was significantly better than that in the traditional solvent. The formation of hydrogen-bond interactions promoted dissolution and release of polysaccharides, thereby enhancing extraction efficiency. Structural characterization showed that SOLP was mainly composed of galacturonic acid, galactose, and rhamnose, with minor amount of glucuronic acid, glucose, and arabinose. In addition, SOLP exhibited ABTS and hydroxyl radical scavenging activities. Overall, this study establishes a data-driven research framework integrating machine learning, DFT analysis, and NADES-based extraction. In addition to improving polysaccharide extraction efficiency and prediction accuracy, this study also provides a promising strategy for the high-value utilization of natural polysaccharides derived from underutilized plant resources and agricultural residues. Download: Download high-res image (181KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·Vol. 36
·期 60
·e76754
·
IF 19.9
Kuhang Liu,Rui Huo,Ruihan Luo,Chengjun Liu,Feiyan Yu,Ying He,Lishun Bai,Yue Liu,Sijie Li,Zhi Chang
Aqueous zinc metal batteries (AZMBs) hold great promise for large-scale green energy storage but suffer from Zn-metal instability caused by dendrite growth, hydrogen evolution, and corrosion. In this work, we introduce inosine (Ino), a natural biomolecule, as an electrolyte additive to address these challenges by leveraging its dual functions of Zn 2+ chelation and Zn-metal adsorption. Ino effectively replaces water molecules within Zn 2+ solvation sheaths through strong coordination bonds and disrupts the hydrogen-bonding network among water molecules, thereby reducing free water activity. Simultaneously, Ino preferentially adsorbs onto Zn metal, constructing a stable interfacial layer that guides uniform Zn 2+ deposition. As a result, Zn//Zn symmetric cells exhibit exceptional cycling stability (3300 h) and durability at low temperature (1500 h). Zn//Cu half-cells achieve a high average Coulombic efficiency of 99.07% over 1000 cycles. Full-cells paired with NH 4 V 4 O 10 (NVO) cathodes retain 77.9% capacity after 2000 cycles at 5 A g −1 . Furthermore, a Zn//NVO pouch cell with a low negative/positive capacity (N/P) ratio (3.53) retains 79.1% of its initial capacity after 290 cycles. A more practical pouch cell delivers an initial capacity of 61.14 mAh and maintains stable operation for 100 cycles, underscoring its real-world viability. This biomolecule-derived solvation-interfacial dual-regulation strategy provides a novel approach for designing eco-friendly, high-performance AZMBs.
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2026
·
IF 8.2
Mingyu Fu,Shiyao Lei,Xuan Luo,Linze Fan,Yifei Xiao,Xuqing Liu,Hong Yu,Cheng-Feng Du
Aromatic polyamide fibers (AF) offer high strength and low density but suffer from poor interfacial affinity with polyether ether ketone (PEEK) due to their high crystallinity and inert surface, leading to inhomogeneous products and degraded mechanical properties. Here, a deprotonation-induced liquid–solid co-precipitation strategy is proposed to fabricate homogeneous AF/PEEK composites. Deprotonation reversibly disrupts intermolecular hydrogen bonds in AF, enabling their dissociation in the liquid phase. Subsequent dispersion of PEEK powders followed by co-precipitation yields homogeneous composite powders, which are then sintered into bulk materials. The effects of AF content (0–20 wt%) on microstructure, mechanical, and tribological properties were systematically investigated. At 10 wt% AF content, the composite achieves optimal performance, with a fracture toughness of 2.74 MPa·m 1/2 (97 % improvement over neat PEEK), a tensile strength of 83.64 MPa (18 % improvement) and a low wear rate of 3.44 ± 0.27 × 10 −6 mm 3 /N·m (42 % reduction). Mechanistic analysis reveals that deprotonation introduces carboxyl groups onto the AF surface and facilitates π-π stacking with PEEK, establishing strong interfacial bonding that effectively dissipates fracture energy. Additionally, uniformly dispersed AF promotes a stable protective tribolayer, suppressing debris spalling and third-body wear. This work achieves simultaneous optimization of AF dispersion and interfacial bonding, offering a new pathway for high-performance thermoplastic composites.
✓ 已验证
DOI
高影响因子