NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 16
·6428-6434
·
IF 3.288
Chang Dong,Yijia Yu,Xiaoling Zhang,Liyan Huang,Ying Wu,Jun Li,Zhengping Liu
Ionic liquids (ILs) with wide electrochemical windows are increasingly used as electrolytes to improve the energy density of graphene-based supercapacitors. However, due to irreversible agglomeration during the reduction of graphene oxide (GO) to reduced graphene oxide (RGO) and less compatibility between the IL electrolyte and RGO, RGO-based electrode materials in an IL electrolyte usually exhibit poor electrochemical properties. To address these issues, we chose an ionic liquid with a similar structure to the electrolyte as a modifier and fabricated reduced graphene oxide composites modified with the chosen ionic liquid (RGO–IL) by a hydrothermal method. The integration of ILs with RGO could prevent the aggregation and restacking of GO layers and improve the compatibility between the RGO–IL electrode and IL electrolyte. The symmetrical supercapacitor assembled using the obtained RGO–IL2 electrode material showed an outstanding energy density (50.19 W h kg−1 at 0.75 kW kg−1) and excellent cycle performance (87.23% retention of the original value after 2000 cycles at 5 A g−1) in the IL electrolyte. These superior performances make RGO–IL composites one of the apposite choices of electrode materials for supercapacitors.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PHYSICS LETTERS
·
2020
·
IF 2.029
Yuchuan Liu,Zongxue Yu,Yixin Peng,Liangyan Shao,Xiuhui Li,Haojie Zeng
The graphene-based film is an interlayer separation film having a special mass transfer property. In this study, a novel TiO 2 nanorod inserted graphene-based membrane on a CA (Cellulose Acetate) mat was fabricated by a vacuum filtration method for water treatment application. The intercalated TiO 2 nanorods expanded the interlamellar spacing among the graphene sheets and thus advanced the separation efficiency of graphene-based membrane, which exhibited a flux several times higher than some commercial nanofiltration membranes and an extremely high rejection especially for dyes, for MB (99.3%), Rhb (99.4%), MO (99.3%), CR (99.6%).
✓ 已验证
产品关联
DOI
高影响因子
Inorganic Chemistry Frontiers
·
2020
·Vol. 7
·期 13
·2434-2442
·
IF 5.958
Changchao Jia,Wenjuan Hu,Yuanyuan Zhang,Chao Teng,Zupeng Chen,Jian Liu
The development of a metal-free photoelectrode film is of great significance. Herein, graphitic carbon nitride (g-C3N4) nanosheets with a concentration of up to 36 mg mL−1 were first obtained on a large scale using a wet ball-milling method. The obtained g-C3N4 nanosheets exhibit 6- and 8-times higher activity in terms of photocatalytic H2 evolution and nicotinamide adenine dinucleotide (NADH) regeneration than bulk g-C3N4, respectively. Furthermore, a uniform g-C3N4 film electrode was fabricated via the interfacial self-assembly of nanosheets at the air/water interface, which can be transferred onto various substrates. By coupling with graphene nanosheets, a g-C3N4/graphene hybrid film electrode was assembled at the interface, showing improved photoelectrochemical coenzyme NADH regeneration efficiency. The photoelectrochemical system uses water as the electron donor, which avoids the drawback of using additional sacrificial agents. This work presents a novel and facile method to prepare high-quality g-C3N4 hybrid films, and also provides a sustainable route for renewable energy conversion and biocatalytic applications.
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2020
·Vol. 10
·期 9
·2797-2809
·
IF 5.721
Moumita Maiti,Manas Sarkar,Donghong Liu
Nicotine (C10H14N2), a hygroscopic molecule, has long been the focus of intensive research due to its rising number of detrimental impacts on human health, associated with the neuroactive alkaloid in tobacco. Water contamination in the form of nicotine substances is a serious issue, where clean water is one of the basic demands for living systems. This study reports exclusively on nicotine degradation and adsorption activity from its aqueous solution through an anatase-phase nano-TiO2 (20 ± 5 nm)-decorated reduced graphene oxide (rGO–TiO2) composite under ultraviolet (UV) and visible-light irradiation, respectively. In this study, XRD, XPS, FT-IR, Raman, UV-DRS, TEM, and BET analyses were applied for the characterization of the structural, optical, and surface morphological properties of rGO–TiO2. About 80% nicotine (1 mM) decomposition was found using 2 mg rGO–TiO2 after 90 min of UV light exposure, while 60% nicotine (1 mM) adsorption at the surface of the rGO–TiO2 (3 mg) was detected within 90 min of visible light illumination. A kinetic study on free radical generation (O2˙−, ˙OH, 1O2) demonstrated that the rGO–TiO2 nanosystem had a substantial rate (1.7-fold higher than TiO2) of ROS formation. Raman shifts showed the defects in the sp3-hybridized carbon of rGO due to the attachment of TiO2 NPs, thereby altering the electronic energy states of the rGO–TiO2 nanocomposite and leading to its superior adsorption via π–π and cation–π interactions. Nicotine degradation was perceived to follow the pseudo-first-order kinetic law, while the nicotine-adsorption activity due to chemisorption on the disordered rGO–TiO2 surface could be expressed via the Langmuir isotherm model. The application of the rGO–TiO2 nanohybrid is highly suggested to be beneficial on an industrial basis for nullifying the nicotine-prompted carcinogenic effects in aquatic systems.
✓ 已验证
产品关联
DOI
高影响因子
ANALYST
·
2020
·Vol. 145
·期 9
·3283-3288
·
IF 3.978
Juan Li,Huifang Shen,Suhua Yu,Geshan Zhang,Chuanli Ren,Xiaoya Hu,Zhanjun Yang
In this research, a novel manganese dioxide nanorod-anchored graphene oxide (MnO2 NRs/GO) composite was synthesized by a simple hydrothermal method for electrochemical sensing application. A highly sensitive electrochemical sensor for dopamine (DA) was constructed by modifying glassy carbon electrode (GCE) with MnO2 NRs/GO. The morphology and performance of the composite material and modified GCEs were investigated by using scanning electron microscopy (SEM), X-ray diffraction (XRD) and cyclic voltammetry (CV), respectively. The resultant MnO2 NRs/GO composite has a large electroactive area and shows excellent electrochemical activity toward DA. Under the optimal conditions, the DA sensor shows a linear response in the DA concentration ranges of 0.1 μM–0.08 mM and 0.08–0.41 mM with a low detection limit of 0.027 μM and a high sensitivity of 602.4 μA·mM−1·cm−2. The MnO2 NRs/GO composite provides a promising platform for the construction of a highly sensitive and selective sensor of DA.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2020
·Vol. 8
·期 17
·5913-5922
·
IF 7.059
Xiaoping Shen,Kangchen Nie,Li Zheng,Zhaosong Wang,Zhe Wang,Song Li,Chunde Jin,Qingfeng Sun
Taking inspiration from skeletal muscle with highly oriented myofibers, we developed a tough wood aerogel/poly(ionic liquid) (WA/PIL) hydrogel directly from wood via delignification, impregnation and gelation for the formation of a tactile sensor of electric double-layer capacitive configuration. The WA/PIL hydrogels integrated the representative properties of both wood and ionic liquids, being a promising candidate for both polyelectrolyte and separator materials. The influences of the wood texture and cross-linker (Bis) content on the mechanical and sensing performances of the hydrogels were investigated. The results showed that the tangential hydrogel slice with a 1.0 mol% Bis content (tan 1.0) displayed the most significant improvement in compressive stress (1.65 MPa) and deformation (73.3%) at fracture, suggesting the best compressibility. Electrodes also played a significant role in the sensitivity and stability of the sensor devices. While tan 1.0 with reduced graphene oxide (rGO) electrodes displayed the largest sensitivities (1.13–19.70 MPa−1), tan 1.0 with Ni foams possessed much more stable ionic signals within the whole stress range with sensitivities of 0.33–9.67 MPa−1. Due to the wide-stress-range responsiveness of our hydrogel sensor from gentle finger contact to vigorous hitting modes, it will find promising applications in various human–machine interfaces in the fields of electronics, recreation, sports, etc.
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2020
·Vol. 12
·期 31
·3892-3900
·
IF 2.596
Qinghua Yu,Ying Zhao,Lihui Huang,Jiawei Sun,Dangqin Jin,Yun Shu,Qin Xu,Xiao-Ya Hu
Flexible sensors are of considerable interest for the development of wearable smart miniature devices. This work reported a flexible electrochemical platform based on reduced graphene oxide (rGO) for the detection of salicylic acid (SA). The free-standing and flexible rGO electrode was prepared via a simple extruded process. Dynamic mechanical deformation and bending studies illustrated the resilience and compliance of the flexible electrode against extreme mechanical deformations. Quantitative analysis of SA was performed by using differential pulse voltammetry (DPV) with this flexible rGO electrode. Linearity ranges for SA were obtained from 1.0 × 10−10 M to 1.0 × 10−5 M with the detection limit of 2.3 × 10−11 M (S/N = 3). This strategy provided a new insight into the design and application of flexible electrodes. It will extend the applications of rGO in sensing, bio-electronics and lab-on-chip devices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2020
·
IF 2.726
Weizhen Chen,Jiehong Huang,Xiang Yu,Xionghui Fu,Yi Zhu,Yuanming Zhang
A special rGO/BiOI/rGO sandwich structure was fabricated, which showed an excellent visible-light photoelectrocatalytic activity much higher than BiOI/rGO and BiOI. Photocatalytic activity depended on charge separation, charge injection and effective light absorption. The charge separation efficiency and the charge injection efficiency of rGO/BiOI/rGO were quantified to be much higher than that of BiOI/rGO and BiOI. So the remarkably enhanced photoelectrocatalytic performance was attributed to the significant enhancement in charge separation and charge injection resulted from more electron transfer channels due to the upper layer and underlayer rGO in the sandwich structure. However, the effective light absorption was not improved since the light absorption efficiency of rGO/BiOI/rGO was almost the same as that of BiOI and BiOI/rGO, although the incorporation of rGO broadened the light absorption range and enhanced the light absorption intensity. This work provided a deep insight for the construction of novel rGO-based photocatalysts with hierarchical nanoarchitectures exhibiting excellent photoelectrocatalytic performances.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2020
·
IF 4.65
Haiyan Zhang,Sen Liu
Developing efficient approachs to synthesize nitrogen-doped graphene materials is significantly important. Herein, it is reported that nitrogen-doped reduced graphene oxide (N-rGO) had been successfully prepared by pyrolysis of poly( p -phenylenediamine)-rGO (P p PD-rGO) hybrids. The combined characterizations of Infrared (IR) spectra, Raman spectra, scanning electron microscopy (SEM) were used to characterize the structure of N-rGO. Most importantly, such N-rGO shows good sensing performances for simultaneous detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA). The linear ranges of the sensors for AA, DA, and UA are 0.1 mM–4 mM, 1 μM–60 μM and 1 μM–30 μM. The detection limit for detection of AA, DA and UA are 9.6 μM, 0.1 μM and 0.2 μM, respectively. This work provides a highly effective approach for preparation of graphene-based materials for electrochemical sensing applications.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2020
·
IF 6.146
Xiaohui Sun,Nuzahat Habibul,Hong Du
ABSTRACT Co 0.85 Se magnetic nanoparticles supported on carbon nanotubes were prepared by a one-step hydrothermal method. The saturation magnetization and coercivity of the MWCNTs/Co 0.85 Se nanocomposites increased due to a decrease in the Co 0.85 Se nanoparticle size in the MWCNTs/Co 0.85 Se nanocomposites and an increase in the distance between the Co 0.85 Se nanoparticles, which increased the specific surface area, thereby benefiting the electrocatalytic performance of the catalyst. Moreover, the MWCNTs/Co 0.85 Se nanocomposites exhibited an excellent hydrogen evolution reaction performance owing to the presence of MWCNTs, which enhanced the mass transport during the electrocatalytic reactions. Furthermore, in an acid solution, the 30 wt% MWCNTs/Co 0.85 Se composite catalyst exhibited a current density of 10 mA cm −2 at a small overpotential of 266 mV vs. RHE, a small Tafel slope of 60.5 mV dec -1 , and good stability for HER.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 137
·期 45
·49388
·
IF 2.52
Cuicui Dong,Zhentang Shi,Qiong Zhou
The ethylenediamine-modified graphite oxide (EGO)-doped sulfonated poly (arylene ether ketone) (SPEEK) composite membranes have been prepared and developed for fuel cell applications in the present work. The base-modified EGO improves the dispersion of inorganic nanosheet in the polymer matrix and enhances proton conductivity by creating continuous conduction pathways. Furthermore, the methanol barrier property also be enhanced due to the nanosheet block the methanol-transport channels. EGO-filled membranes display improved dimensional stability, proton conductivity, and ethanol permeability than those using SPEEK control and graphite oxide (GO)-filled membranes. In the direct methanol fuel cells (DMFCs), the SPEEK/EGO-1.5 membrane displays the highest current density of 395.9 mA/cm 2 at 60°C, which is 1.6- and 1.4-fold higher than that of SPEEK (254.0 mA/cm 2 ) and SPEEK/GO membrane (292.6 mA/cm 2 ).
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2020
·
IF 3.807
Zhen-Kun He,Ali Reza Kamali,Zeng-Rong Wang,Qiang Sun,Zhongning Shi,Dexi Wang
Li surface diffusion kinetics is an important parameter in determining the electrochemical performance of metal oxide electrodes used in Li ion batteries. Here, we investigate this parameter in SnO 2 nanobelts . A low cost, simple and facile in-situ calcination method is developed to fabricate highly crystalline SnO 2 nanobelts with surface oxygen vacancies using commercially available tin oxide particles as the precursor. The phase composition , morphology and surface characteristics of the SnO 2 nanobelts are investigated by several techniques, including the X-ray diffraction and photoelectron spectroscopy, high resolution electron microscopy and electrochemical evaluations. The Li ion surface diffusion coefficients of nanobelts are investigated by impendence spectroscopy and sweep voltammetry measurements; and found to be 1.07 × 10 −11 cm 2 s −1 . Such enhanced Li surface diffusion kinetics as well as significant contribution from pseudocapacitance result in an excellent Li-ion storage performance of SnO 2 nanobelts, while the free space between the nanobelts provides morphological stability during prolonged battery cycles.
✓ 已验证
产品关联
DOI
高影响因子