BIOSENSORS & BIOELECTRONICS
·
2019
·
IF 9.518
Yujie Han,Ran Zhang,Chuan Dong,Fangqin Cheng,Yujing Guo
Nitrite ions (NO 2 − ) have been widely used in the food and drink industry as preservatives. However, the NO 2 − discharged into the environment is harmful to the ecosystem and human health. Due to its potential toxicity, selective and sensitive detection of nitrite is important. In this work, a rose-like Au nanoparticles/MoS 2 nanoflower/graphene (AuNPs/MoS 2 /GN) composite was fabricated using a one-pot hydrothermal method without the addition of any extra reductant for use in nitrite detection. Graphene acts as an efficient matrix for the growth of MoS 2 nanoflower (NF), and the edges of the MoS 2 NF subsequently load AuNPs. The obtained AuNPs/MoS 2 /GN composite exhibits excellent electrooxidative activity toward nitrite ions, which is attributable to its large specific surface area, good conductivity, and the synergistic catalysis of each component. Accordingly, we propose a rapid, sensitive, and cost-effective electrochemical method for nitrite detection, which achieved a linear dynamic range of 5.0 μM to 5.0 mM with a detection limit of 1.0 μM. The present work provides not only a general one-pot synthesis method for a variety of noble–transition metal dichalcogenides nanohybrids , but also an example of the fabrication of an electrochemical nitrite sensor using a nanohybrid as an enhanced material, an approach that can easily be extended to other sensors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2019
·Vol. 7
·期 32
·9856-9864
·
IF 6.641
Di Yin,Ming-Liang Wang,Ying-Zi Wang,Xun Hu,Bo Liu,Hong Liu,Lulu Ma,Guang-Gang Gao
A ternary nanocomposite containing ZnO, ZnS and MoS2 (ZnMoNCs) has been firstly synthesized by Keggin-type polyoxomolybdate and ZIF-8 as starting materials to provide Mo and Zn sources simultaneously. As compared to the mono- or bi-component complex, ZnMoNCs present more sensitive and stable surface-enhanced Raman scattering (SERS) activity. When rhodamine 6G is used as a probing molecule, the detection limit of 10−9 mol L−1 can be achieved on the ZnMoNC substrate with the enhancement factor (EF) of 1.4 × 108, which is the highest sensitivity among the known semiconductor SERS substrates. The increased adsorption sites and the synergistically improved charge transfer are conducive to the large enhancement of the SERS activity. It was also proved that the ZnMoNC substrate possesses high stability and self-cleaning properties, and can be reused in SERS detection without losing its activity even after 5 cycles. This work paves a new way to the design of new semiconductor SERS substrates by the utility of a multicomponent complex.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTRONIC MATERIALS
·
2019
·Vol. 48
·期 10
·6397-6405
·
IF 1.676
Yang Mengru,Shi Yonghong,Li Yuangang,Li Huajing,Luo Ningdan,Li Jin,Fan Jing,Zhou Anning
Abstract 2D Bi 2 S 3 /CdS nanosheet arrays have been constructed by a simple three-step method. Firstly, BiOI nanosheet arrays have been electrochemically grown on the surface of conductive FTO substrate and then converted into Bi 2 S 3 nanosheet arrays by ion exchange. Finally, CdS was hydrothermally deposited onto the surface of Bi 2 S 3 nanosheet arrays to form hybrid Bi 2 S 3 /CdS nanosheet arrays. The obtained hybrid heterojunction arrays have been used as photoanodes for photoelectrochemical hydrogen evolution and showed enhanced performance and prolonged stability. The photocurrent density of the elegant Bi 2 S 3 /CdS nanosheet arrays reaches 9.48 mA/cm 2 at 1.23 V RHE under an illumination of 100 mW/cm 2 from AM 1.5G sun simulator, which is more than ten times higher than that of the pure Bi 2 S 3 nanosheet arrays and the photocurrent density does not decline obviously after 4 h of continuous operation. Ultimately, a rational mechanism is proposed to elucidate the high performance and excellent stability of Bi 2 S 3 /CdS nanosheet arrays for photoelectrochemical cells. Graphic Abstract To obtain nanosheet arrays : Arrays of Bi 2 S 3 /CdS nanosheets on a FTO substrate are synthesized by electrodeposition, ion exchange and hydrothermal process. The Bi 2 S 3 /CdS nanosheet photoanodes show better photoactive and photostability compared to bare Bi 2 S 3 (CdS) nanosheets for photoelectrochemical splitting of water.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2019
·
IF 7.467
Wenqiang Yang,Junrong Zeng,Yixin Hua,Cunying Xu,Samarjeet Singh Siwal,Qibo Zhang
Herein, we perform a facile one-step deep eutectic solvent electrodeposition approach to fabricate a series of S-doping highly porous Co-S films by in situ grown on Ni foam (Co-S/NF), which exhibits a superior catalytic activity and robust nature for both oxygen and hydrogen evolution reaction (OER and HER) in alkaline media . The doping of S is evidenced to induce a structural and size transition on the Co deposited layer, which leads to a significant increase on the electrochemical surface area and more accessible active sites for enhancing the catalytic activity. The formation of oxygen deficiencies-rich Co-O/OH species with a phase transformation from Co-S species is noticed during OER. Benefiting from the merits of in situ growth, the Co-S films obtained at an optimal S doping level (denoted as Co-S-50/NF) can robustly drive high current densities of 100 and 500 mA cm −2 with low overpotentials of 322 and 368 mV for OER, and 124 and 155 mV for HER . The water electrolyzer assembled with Co-S-50/NF requires only 1.79 and 2.08 V to reach 100 and 500 mA cm −2 in 1.0 M KOH, and 1.72 V to achieve 500 mA cm −2 in 30 wt% KOH at 353 K for over 150 h.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2019
·
IF 1.859
Xunan Shen,Chao Zhang,Yang Feng,Wei Li,Guifeng Chen,Chengchun Tang
In this work, Cu 2 ZnSn(S,Se) 4 thin films were prepared by sol-gel methods based on dimethyl sulfoxide solutions with H 3 BO 3 additive. The morphological, structural, compositional and photovoltaic properties of the Cu 2 ZnSn(S,Se) 4 thin films were investigated. We found that the formation of voids, cracks and fine-grain layers were suppressed effectively with slight H 3 BO 3 . Based on the decrease of these micro defects, the series resistance decreased and shunt resistance increased largely. And the band gap of CZTSSe solar cells broaden from 1.031 eV to 1.064 eV. The best solar cell showed an open-circuit voltage of 440.1 mV, short-circuit current density of 28.15 mA/cm 2 , fill factor of 58.81% and power conversion efficiency of 7.27% under air mass 1.5 (100 mW/cm 2 ) illumination.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 30
·期 15
·13948-13956
·
IF 2.195
An Dong,Bai Lizhong,Cheng Shuaishuai,Zhang Zhiyi,Duan Xiaoyuan,Sun Zhijian,Liu Yaqing
Three-dimensional nano-flower structure of MoS 2 /PANI nanocomposites were successfully fabricated via the in situ polymerization method. The best reflection loss could reach − 50.57 dB at 5.04 GHz with the thickness of 5.0 mm and the efficient absorption bandwidth (RL ≤ − 10 dB) was about 2.08 GHz when the mass ratio of MoS 2 /PANI was 5:5. Additionally, in the case of satisfying effective electromagnetic wave absorption, other two effective and even wider absorption bandwidth could achieve 4.96 GHz (13.04–18.00 GHz) and 3.68 GHz (8.08–11.76 GHz) at the thickness of 2.0 mm and 3.0 mm, respectively. According to the electromagnetic parameters’ analyses, the more multi-interfaces introduced by the construction of such three-dimensional nano-flower structure, the more multi-polarization and reflection could be occurred, the better electromagnetic wave absorption could be achieved. The results indicated that MoS 2 /PANI nanocomposites were the promising electromagnetic wave absorbing materials.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2019
·
IF 4.916
Yaxue Jia,Shucheng Sun,Xiujun Cui,Xiaohong Wang,Li Yang
We show that vanadomolybdophosphoric heteropoly acid (H 5 PMo 10 V 2 O 40 , PMoV 2 ), one of the polyoxometalates (POMs), presents peroxidase-like activity that can catalyze the luminol/H 2 O 2 reaction to generate chemiluminescence (CL) emission. Based on this foundation, we report an enzyme-free luminol/H 2 O 2 /PMoV 2 CL system that can be utilized for the ultrasensitive detection of H 2 O 2 . The CL intensity exhibits good linear dependence on H 2 O 2 concentration in a wide range up to 5000 nM with a limit-of-detection of 5 nM. The method was successfully used for the determination of glucose in human serum. Our study paves the way for the application of functional POM materials in a variety of biosensing assays, such as the determination of cholesterol, uric acid , lactate, etc., in which H 2 O 2 is a product of oxidoreductase enzymes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
·
2019
·Vol. 19
·期 9
·5736-5742
·
IF 1.093
Bai Jirong,Lv Wenhua,Xu Haiyang,Chen Gang,Ni Zhijiang,Wang Zhilei,Qin Hengfei,Zheng Zheng,Li Xi
Ag3PO4/sulfur-doped g-C3N4 heterojunctions were fabricated by the means of a facile calcination and co-precipitation method. Structural characterization suggested that Ag3PO4 was successfully loaded onto sulfur-doped
g-C3N4. The absorption band edges of sulfur-doped g-C3N4 were shifted to the longer wavelength in comparison with bulk g-C3N4. The Ag3PO4/sulfur-doped g-C3N4 heterojunctions manifested
substantially higher visible-light photocatalytic performance as compared with Ag3PO4/bulk g-C3N4. Photoluminescence spectra suggested that the stable Ag3PO4/SGCN heterojunctions could effectively address the electron—hole
recombination rate, together with remarkably enhancing the photocatalytic activity. The enhancement of light absorption and better dispersion in Ag3PO4/sulfur-doped g-C3N4 provide more migration channels, together with posing crucial responsibility
for the enhanced photocatalytic performance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomaterials
·
2019
·Vol. 9
·期 9
·1244
·
IF 4.034
Haizeng Song,Han Wu,Yuan Gao,Ka Wang,Xin Su,Shancheng Yan,Yi Shi
Tin disulfide (SnS2) has gained a lot of interest in the field of converting solar energy into chemical fuels in light-assisted electrochemical water splitting due to its visible-light band gap and high electronic mobility. However, further decreasing the recombination rate of electron-hole pairs and increasing the density of active states at the valence band edge of the photoelectrodes were a critical problem. Here, we were successful in fabricating the super-thin SnS2nanostructure by a hydrothermal and solution etching method. The super-thin SnS2nanostructure as a photo-electrocatalytic material exhibited low overpotential of 0.25 V at the current density of −10 mA·cm−2and the potential remained basically unchanged after 1000 cycles in an H2SO4electrolyte solution, which was better than that of the SnS2nanosheet and SnS/SnS2heterojunction nanosheet. These results show the potential application of super-thin SnS2nanostructure in electrochemical/photo-electrocatalytic field.Keywords:layered semiconductor;solution etching;SnS2nanostructure;light-Assisted electrochemical water splitting
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2017
·Vol. 6
·期 4
·1551-1560
·
IF 8.867
M. Y. Gao,J. R. Zeng,Q. B. Zhang,C. Yang,X. T. Li,Y. X. Hua,C. Y. Xu
The rational design of noble metal-free electrocatalysts that are highly active, robustly stable, and capable of delivering large current densities (>500 mA cm−2) at low applied potentials (<300 mV), in particular for oxygen evolution reaction (OER), is critical for practical use in electro-driven water-splitting devices. Herein, we report a facile scalable and one-step electrochemical deposition approach for the development of a self-supported 3D nanoporous S-doped amorphous NiFe2O4/Ni3Fe composite electrode with outstanding OER electrocatalytic activity and robust durability in alkaline media. Benefiting from the 3D nanoporous architectures and their in situ growth on a highly conductive substrate, the novel S-doped NiFe2O4/Ni3Fe composite electrode offers an ideal platform for fast electron transport and efficient mass transport. It also provides abundant active surface area as well as accessible active sites for a catalytic reaction. Impressively, the S-doped composite electrode displays superior OER activity in 1.0 M KOH that compares favorably with the state-of-the-art RuO2 catalyst. Low overpotentials of 260 and 285 mV (iR corrected) are required to reach long-term stable current densities of 100 and 500 mA cm−2 for OER, respectively. The electrolyzer cell obtained by pairing this S-doped composite electrode as an anode with a Ni–Mo based cathode for overall water-splitting works efficiently in both 1.0 M (1.52 V for 10 mA cm−2 and 1.79 V for 100 mA cm−2) and 30 wt% KOH (1.69 V for 100 mA cm−2) solutions, with long durability for over 220 h. Such catalyst couple exhibits superior catalytic performance and holds great promise for potential application in electrochemical water splitting.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2017
·
IF 6.216
Xiao-Fei Wang,Gui-Gen Wang,Jia-Bing Li,Zheng Liu,Wen-Feng Zhao,Jie-Cai Han
In this article, a new application of using S, N co-doped graphene quantum dots (S, N-GQDs) as ideal color converters in solid-state white light-emitting diode (WLED) is reported. To this end, the S, N-GQDs with an average diameter of ∼4.46 nm are obtained by a hydrothermal approach using citric acid and thiourea as source materials. The PL spectra of S, N-GQDs show an excitation-independent behavior in the range of 300–380 nm. Under UV illumination, the S, N-GQDs display intense blue-light with the quantum yield of 51.2%. The PL mechanism is also investigated. Then, we fabricate freestanding luminescent composite films in a solution casting method by combining S, N-GQDs with YAG:Ce 3+ phosphors based on a polyvinyl alcohol (PVA) matrix. The luminescent films have superior foldability and photostability and excellent heat resistance, and retain their optical performances in the solid-state. To realize their potential, a high-powered remote WLED has been demonstrated. The results indicate that S, N-GQDs and YAG:Ce 3+ can be homogeneously dispersed in the PVA without aggregation so that uniform white-light emission can be obtained. These composite films containing S, N-GQDs are promising to be used in state-of-the-art UV-pumped remote WLED according to their wide wavelength emission and collapsible illumination device.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SEPARATION SCIENCE
·
2017
·Vol. 41
·期 4
·856-867
·
IF 2.557
Gaowa Jin,Yanming Liu,Fan Yang,Dongping Yu,Jingyu Yan,Weijia Zhou,Zhimou Guo,Jianhua Zhu,Xinmiao Liang
A silica-based reversed-phase stationary phase bonding with phenyl and tetrazole groups was synthesized by thiol-epoxy ring opening reaction. The bonded groups could not only provide hydrophobic interaction, but also π–π, hydrogen bonding, electrostatic interactions, and so on. The results of characterization with elemental analysis and solid-state 13 C cross-polarization magic-angle-spinning NMR spectroscopy indicated the successful preparation of phenyl/tetrazole sulfoether bonded stationary phase. Chromatographic evaluation revealed that phenyl/tetrazole sulfoether bonded stationary phase behaved well under the reversed-phase mode. The column parameters ( H , S *, A , B , and C ) showed different selectivity compared with some typical commercial columns, and it was validated by the separation of estrogen, ginsenoside, alkaloid samples. Based on the different selectivity between phenyl/tetrazole sulfoether bonded stationary phase and C18 columns, phenyl/tetrazole sulfoether bonded stationary phase also showed potential to construct a 2D reversed-phase liquid chromatography system with C18. And it was verified by the separation of corydalis tuber and curcuma zedoary extracts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子