Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2024
·
IF 3.9
Kashif Nawaz Khattak,Maosen Zhang,Caixia Deng,Shuang Li,Ling Jiang,Pran Gopal Karmaker,Xiupei Yang
In this work, the hybrid material NH 2 -MIL-125(Ti)@TpPa-NO 2 was synthesized by grafting an amino-functionalized titanium-based metal–organic framework (NH 2 -MIL-125(Ti)) with 2,4,6-tri(4-pyridyl)-1,3,5-triazine-nitro (TpPa-NO 2 ) moieties. The resulting composite material exhibited remarkable removal efficiency owing to the synergistic effects derived from the combination of the NH 2 -MIL-125(Ti) and TpPa-NO 2 components. The material demonstrated excellent stability and recyclability, making it a promising candidate for the treatment of wastewater containing rhodamine-B (Rhd-B). Some characterization techniques were employed to elucidate the structural features and surface morphology of the hybrid material. The adsorption capacity of NH 2 -MIL-125(Ti)@TpPa-NO 2 for Rhd-B dye was evaluated, and the results revealed an exceptional removal efficiency of 99.96 % and a high adsorption capacity of 25.54 mg/g, highlighting the superior adsorption performance of the material. The adsorption process was found to follow Langmuir isotherm and pseudo-second-order kinetics, indicating that chemisorption is the predominant mechanism governing the uptake of Rhd-B dye onto NH 2 -MIL-125(Ti)@TpPa-NO 2 .
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2019
·Vol. 150
·期 1
·209-221
·
IF 2.372
Xu Songlin,Zhang Mingyi,Guo Shujuan,Li Mengru,Huang Qingming,Chen Xiaohui
Abstract Diffusion limitation caused by microporous molecular sieves has always been a bottleneck problem in liquid phase epoxidation. In this study, several different carbon sources were used as hard templates to prepare hierarchically porous zeolite Ti-MWW (cTi-MWW) successfully. Compared with conventional Ti-MWW, cTi-MWW has an additional hierarchically porous structure and abundant pore structure distribution. Especially, the cTi-MWW prepared with polyethylene glycol1540 (PEG) as the hard template not only has a multiple hierarchically porous structure, but also exhibits small crystal size and good hydrophobicity properties studied by TEM and in situ FT-IR. At the same time, the cTi-MWW prepared with PEG exhibits better activity than the conventional Ti-MWW in the selective epoxidation reaction of allyl alcohol (AAL) with H 2 O 2 as oxidant and the conversion is improved by 11% (Si/Ti = 20). And a higher efficiency and longer catalyst life in fixed-bed catalytic reactor were exhibited by using cTi-MWW PEG as catalyst. The physicochemical properties of cTi-MWW prepared with different hard templates were systematically studied by SEM, XPS, UV–Vis, XRD and N 2 absorption–desorption techniques. This method is effective for the synthesis of cTi-MWW and significant for the preparation of hierarchically porous zeolites in industrial production. Graphic Abstract A hierarchically porous zeolite Ti-MWW prepared with different hard templates successfully. With the hierarchically porous structure, which have better adsorption, diffusion, and reactivity in liquid phase epoxidation, thus improving the catalytic activity. Especially, the hierarchically porous zeolite Ti-MWW prepared with polyethylene glycol exhibits small crystal size and good hydrophobicity properties.
研究领域:
材料科学
·
催化化学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2014
·Vol. 2
·期 33
·13705-13712
·
IF 0
Zewen Fu,Tengfei Jiang,Lijing Zhang,Bingkun Liu,Dejun Wang,Lingling Wang,Tengfeng Xie
In this paper, we present the fabrication of Ti-doped α-Fe2O3 and surface treatment with Al3+ for application as a photoanode in photoelectrochemical water splitting. The Ti-doped α-Fe2O3 with Al3+ treatment shows a 100 mV cathodic shift of the onset potential and a notable improvement of the photocurrent density. The samples were characterized by SEM, TEM, HRTEM, XRD, Raman, UV-vis and XPS to obtain the information after surface treatment. Based on electrochemistry and photoelectrochemistry techniques, it appears that surface treatment with Al3+ passivates the surface states and decreases the accumulation of charge at the surface of Ti–Fe2O3. The results show that Ti-doped Fe2O3 with Al3+ surface treatment can be used as an efficient photoanode for photoelectrochemical water splitting.
研究领域:
材料科学
·
能源科学
✓ 已验证
DOI
JOURNAL OF ELECTRONIC MATERIALS
·
2025
·
IF 2.5
Li Lingyu,Ma Qian,Zhao Dongheng,Zhang Huayushuo,Li Bolong
Recently, the development of an n-pentane-sensing product has always been plagued by the lack of suitable inorganic material with good gas-sensing response and selectivity at low operating temperatures. In this work, Ti-MIL-125-induced one-dimensional tubular In 2 O 3 /TiO 2 heterostructures have been fabricated by a facile electrospinning method and a subsequent heat-treatment process. Obvious morphological evolution from a fibrous to a tubular shape with the presence of In 2 O 3 -TiO 2 heterojunctions can be adjusted by varying the added amount of the Ti-ML-125 component. Compared with pure In 2 O 3 , the optimal In 2 O 3 /TiO 2 composites exhibit a blue-shifted energy band (2.52 eV) and an increased specific surface area (227.70 m 2 /g), as well as the enhanced gas-sensing performance on various concentrations of n-pentane. For example, In 2 O 3 /TiO 2 -3% can not only display excellent long-term stability and humidity stability but also has a high response of 670–100 ppm n-pentanol at 50°C, much larger than that of pure In 2 O 3 (50) at 150°C. Significantly, In 2 O 3 /TiO 2 -3% can still reach the high response of 197–100 ppm n-pentanol at room temperature. According to density functional theory (DFT) calculations, the enhanced gas-sensing mechanism is mainly attributed to the combination of the distinctly increased surface active sites through the regulation of morphology and the introduction of effective In 2 O 3 -TiO 2 heterojunctions, which can be beneficial to improving the surface adsorption/desorption characteristics and the electron transport between n-pentanol and the sensing material interface. Graphical
研究领域:
材料科学
·
传感器技术
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Jie Xu,Hongji Li,Huimin Feng,Yuqin Ma,Dandan Wang,Jianwei Zhu
The removal of refractory organic contaminants in the environment is vital, but developing highly active catalysts with a simple synthesis process remains a challenge. Herein, NH 2 -MIL-125(Ti) (Ti-MOF) as a template, Ti 3+ -TiO x clusters of different quantities were embedded in the CdIn 2 S 4 nanosheets to construct Ti 3+ -TiO x /CdIn 2 S 4 (TiCIS) heterojunction by an in-situ self-assembly strategy, which had a hollow structure, strong visible light absorption, high separation rate of carriers, and more active sites. During the degradation experiment of Rhodamine B (RhB), TiCIS25 exhibited the best photocatalytic performance, and 98.0% of RhB was degraded within 60 min of visible irradiation. The intermediates in the RhB degradation and their ecotoxicity were analyzed, which revealed that RhB degradation was a detoxification process. The radical trapping experiments and electron spin resonance (ESR) tests indicated that e - , 1 O 2 , and ·O 2 - are the main active species for RhB degradation. Moreover, a possible photocatalytic mechanism was proposed based on electrochemical tests. The photodegradation performance of the as-prepared TiCIS catalyst under different reaction parameters (authentic water matrices, initial pH, coexisting anions, organic matter concentration, actual sunlight, reaction temperature, and multiple pollutants) and circulating experiments, as well as the photo-reduction process CO 2 , reflected that TiCIS25 possessed excellent practicability, cyclic stability, and universal applicability. Above all, TiCIS25 exhibited great potential in photocatalytic processes, and the work provided a feasible strategy for designing high-performance photocatalysts .
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
ACS Omega
·
2017
·
IF 0
Tingting Yang,Hu Li,Jian He,Yanxiu Liu,Wenfeng Zhao,Zhongwei Wang,Xiaoxiao Ji,Song Yang
γ-Valerolactone (GVL) is one of the versatile platform molecules and biofuel additives derived from the lignocellulosic biomass. Herein, the efficient synthesis of GVL from biobased ethyl levulinate (EL) using alcohol as both H-donor and solvent without an external hydrogen source has been achieved over porous Ti/Zr microspheres. The catalysts (TixZry) with different Ti/Zr molar ratios were synthesized using hexadecylamine (HDA) as a structure-directing agent via a sol–gel process combined with solvothermal treatment and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermal gravimetric analysis, NH3/CO2-TPD, N2 adsorption–desorption, and pyridine-IR. A high GVL yield of 90.1% at 100% EL conversion was obtained at 180 °C for 6 h over Ti2Zr8 in 2-propanol. The microspheric and porous structure, enhanced surface areas, and acid/base contents by the proper introduction of Ti species into Zr oxide were demonstrated to be responsible for the pronounced performance. The microspheric Ti2Zr8 porous catalyst could be reused at least six times with no decrease in catalytic activity.
研究领域:
催化化学
·
生物质转化
·
材料科学
✓ 已验证
DOI
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2024
·
IF 3.9
Nan Jiang,Boyu Du,Di Gao,Zengbin Chai,Chao Liu,Xing Zhu
Herein, we synthesize the ZnAl-LDHs/NH 2 -MIL-125 composite via in situ growth of Ti-based metal–organic framework (MOFs) using layered double hydroxide (LDHs) as a carrier. The composite exhibits excellent performance for As(V) removal, achieving an adsorption capacity of 1634.0 mg/g in wastewater with an As(V) concentration of 1500 mg/L at pH of 10. The porous flower-like structure of the composite inherits the benefits of both the spatial structure of MOFs and the arsenic-affinity of LDHs. This results in an abundant active surface containing –OH, –NH 2 , M–O–M, and –COO– species, collectively contributing to As(V) adsorption. The adsorption progress governing As(V) removal follows the Langmuir isotherm and pseudo-second-order (PSO) kinetic models, revealing a monolayer and chemisorption mechanism. This study showcases the feasibility of the in situ growth of a MOF on LDHs to synthesize high-capacity adsorbents, offering a potential solution for As(V) removal from wastewater.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2013
·Vol. 15
·期 10
·1-6
·
IF 2.175
Zhang Ying,Chen Yu,Zhang Yupeng,Cong Huahua,Fu Bo,Wen Shanpeng,Ruan Shengping
A novel porous nanosized humidity-sensing material of amine-functionalized titanium metal organic framework (MOF), NH 2 -MIL-125(Ti), was investigated. NH 2 -MIL-125(Ti) nanoparticles with high phase purity and good physicochemical property were synthesized by a simple hydrothermal method. The nanosized MOF was characterized by X-ray diffraction and scanning electron microscope. The average size of the MOF nanoparticles is around 300 nm. Then NH 2 -MIL-125(Ti) humidity sensor was fabricated by coating the nanosized materials on interdigitated electrodes. The humidity sensor based on NH 2 -MIL-125(Ti) shows good linearity of RH (11–95 % RH), as well as fast response and recovery time. The RH detecting range is from 11 to 95 % RH at 100 Hz. The response and recovery time are about 45 and 50 s, respectively. Moreover, the sensing mechanism was discussed by complex impedance analysis in detail. These results indicate the potential application of NH 2 -MIL-125(Ti) in humidity sensors.
研究领域:
生物医学工程
·
材料科学
·
传感器技术
·
纳米技术
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Mingyuan Zhang,Taotao Cai,Weiliang Lu,Shili Zheng,Ying Zhang,Yi Zhang
Given the high cost of fabricating the Ti-6Al-4V alloy powder by the traditional hydriding-dehydriding and atomization methods, a novel sintering-deoxygenation process was proposed and studied in this research. With the help of the developed deoxygenation treatment, value-added raw materials such as Ti sponge can be substituted by low-cost and low-grade materials with high oxygen content. In addition, sintering in a solid state saves a significant amount of processing energy compared to alloying above the melting point of Ti in the conventional alloy production process. This paper prepared six sintering precursors with different initial compositions and oxygen contents using the low-valued raw materials of crude titanium, crude vanadium, V 2 O 3 , Al powder, and Al 2 O 3 powder. These precursors' sintering performances on shrinkage, phase composition, microstructure, and porosity were investigated. The results show that the sintering shrinkage is positively correlated with the sintering temperature and holding time and is also affected by the raw materials. The pellet made by mixed crude titanium and AlV master alloy showed the largest shrinkage and the densest bulk. The various combinations of the raw materials led to the changes in the oxygen contents in the precursors, the alpha-beta phase ratio, and the shift of the diffraction peaks of the α-phase. The dissolving of the AlV master alloy and the formation of the Ti 3 Al intermediate phase took place during sintering due to diffusion. Sintering at 900–1000 °C is critical for elemental diffusion and densification, and sintering at higher temperatures is decisive for microstructure homogenization and further densification. Using the hydrogen-assisted Mg deoxygenation method, all the sintered samples could be treated to an oxygen level of around 0.4 wt% regardless of oxygen content in precursors. The contents of Ti, Al, V, and Fe in the obtained Ti-6Al-4V powders met the requirements of GB/T 34486-2017. This research has demonstrated the feasibility of fabricating Ti-6Al-4V alloy powder by the novel sintering-deoxygenation process.
研究领域:
材料科学
·
冶金工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2023
·Vol. 27
·期 9
·2499-2507
·
IF 2.5
Wu Jiani,Lu Yan,Wu Huacheng,Luo Qian,Bai Zhe,Li Jun
All solid-state lithium batteries have been widely used in mobile communications and electric vehicles due to their high energy density, wide operating voltage, and long cycle life. However, solid-state electrolytes have shortcomings such as insufficient stability and low conductivity. In this study, the sol–gel method prepared the solid electrolyte Li 6.25 Al 0.25 La 3 Zr 2 Ti 0.25 O 12 co-doped with Al and Ti. The influence of Al and Ti on the structure and conductivity of Li 7 La 3 Zr 2 O 12 was investigated by X-ray diffraction, impedance spectroscopy, scanning electron microscopy, and inductively coupled plasma spectrometer (ICP). With optimal additions of Al and optimal additions of Ti, Li 6.25 Al 0.25 La 3 Zr 1.75 Ti 0.25 O 12 electrolyte calcined at 900 °C for only 6 h showed an ionic conductivity of 1.51 × 10 −4 S/cm at room temperature. Li/Li 6.25 Al 0.25 La 3 Zr 1.75 Ti 0.25 O 12 /LiFePO 4 all solid-state battery was assembled. The initial charge and discharge capacity of the lithium-ion phosphate positive electrode at 10 μA/cm 2 was 165.1 mAh/g and 130.1 mAh/g at room temperature. The initial coulomb efficiency was 78.9%. After 100 cycles, the discharge capacity was 149.1 mAh/g, and the capacity retention rate was 99.8% at room temperature.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2022
·
IF 14.224
Zhen Huang,Chao Xiong,Lingri Ying,Welong Wang,Shixing Wang,Jing Ding,Jianfeng Lu
Lead ions in water have notorious effects on humans and environment. It is important to design an adsorbent with high adsorption capacity and reproducibility for efficiently removing Pb (II)ions from polluted water. Here, a novel Ti-based MOFs material (BDB-MIL-125(Ti)@Fe 3 O 4 ) was prepared by modifying NH 2 -MIL-125(Ti) with sulfhydryl and amino groups. Due to the large number of active sites, the maximum Pb (II) adsorption capacity of BDB-MIL-125(Ti)@Fe 3 O 4 was 710.79 mg/g at 25 °C and pH = 6 within 120 min corresponding to a maximum removal rate of 95.68%. The adsorbent also has extremely high selectivity and good cycling adsorption performance. The adsorption isotherms and kinetics agree with the Langmuir and the pseudo-second-order models, indicating that the process was chemisorption . Thermodynamic studies prove that spontaneous processes enhance Pb (II) adsorption at higher temperatures. DFT and FMOs calculations were used to discuss the adsorption mechanism. The sulfhydryl groups on the surface of organic ligands have a stronger affinity for Pb (II).
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Yi Wen,Chenguang Qian,Bowen Cui,Boxuan Tian,Chunquan Li,Hang Li,Fang Yuan,Zhiming Sun
Photocatalytic CO 2 reduction harnesses sunlight to convert CO 2 into fuels (e.g., CO, CH 4 ) to address global warming and energy shortages, but faces challenges like high cost and low efficiency. In this work, NH 2 -MIL-125(Ti)/diatomite composites were prepared by one-step solvothermal method using diatomite as a support. Characterization indicated that NH 2 -MIL-125(Ti) units were grown in-situ on diatomite through surface-mediated interactions with Si-O-Ti bonds. This process significantly reduced the agglomeration of NH 2 -MIL-125 particles. Among the resulting composites, NH 2 -MIL-125/DE-60 % had the best photocatalytic activity with a CO production rate of 7.36 μmol g −1 h −1 , which is 1.56 times higher than NH 2 -MIL-125. In four cycles, the yield remained above 6.88 μmol g −1 h −1 . Meanwhile, electrochemical characterization revealed that composite enhances the separation efficiency of photogenerated carriers and reduces carrier migration resistance. The excellent performance of NH 2 -MIL-125/diatomite composites could be attributed to the synergistic effects of its better dispersion and the Si-O-Ti interface formation, which improve light absorption, increase the number of active sites and facilitate charge separation. Meanwhile, the specific mechanism of CO 2 reduction by NH 2 -MIL-125/diatomite composites and its reduction pathway were also revealed. In conclusion, this study successfully reduced the agglomeration effect of MOFs, and provided implications for realizing in-situ growth of MOFs on mineral surfaces.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）