CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Lili Li,Pingan Chen,Yingli Zhu,Fu Chen,Mengke Qiao,Xiangcheng Li,Renchao Che
A lattice distortion strategy is employed to tailor the electronic structure. • Electron localization and enhanced dipole moment delay polarization relaxation. • Lattice distortion prolongs the relaxation time by 33.5%. • Absorption peak shifts to X-band with a reflection loss of −50.6 dB. The high electrical conductivity of transition metal borides gives rise to Ku-band dielectric resonance and loss, while causing poor microwave absorption at the X-band. Here, we design a high-entropy (Ti 0.2 Mo 0.2 Nb 0.2 Ta 0.2 Hf 0.2 )B 2 to regulate the electronic structure via lattice distortion engineering, which retards the polarization kinetics and induces a significant redshift of the dielectric response from the Ku-band to the X-band. The results indicate that the (Ti 0.2 Mo 0.2 Nb 0.2 Ta 0.2 Hf 0.2 )B 2 exhibits atomic-scale dislocations (10–16°) between the boron and metal layers. These lattice defects reduce the projected density of states near the Fermi level by 40–50% and promote electron localization. Simultaneously, atomic displacements of 0.0408 Å and 0.1267 Å along the a and c-axes yield an 8.6% enhancement in the dipole moment, which raises the energy barrier for dipole reorientation. And the increased lattice distortion slows the polarization relaxation time (τ) of the boride by 33.5%. As a result, the absorption peak frequency shifts from Ku to X-band and the corresponding RL min increases from −28.6 dB to −50.6 dB. This work establishes a strategy for controlling the dielectric response frequency and absorbing properties at the lattice and atomic scale. A high-entropy strategy is employed to engineer lattice distortion in transition metal borides. The resulting atomic-scale defects promote electron localization and enhance the dipole moment, which delays polarization relaxation. This effect prolongs the relaxation time (τ) by 33.5%, which leads to a shift of the absorption peak to the X-band and a reflection loss of −50.6 dB, establishing a fundamental design principle for controlling absorption frequency. Download: Download high-res image (161KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
POLYMER ENGINEERING AND SCIENCE
·
2026
·
IF 3.6
Rongrong Shen,Junjie Ge,Jing Zhou,Haihong Ma,Zhengfa Zhou,Weibing Xu,Fengmei Ren
Owing to its high strength and lightweight characteristics, polyamide 6 (PA6) is widely used in the field of engineering plastics. However, the relatively low heat deflection temperature (HDT) of PA6 constrains its application in high-temperature environments, particularly in electric vehicle charging infrastructure and related functional components. In this study, a composite filler with high surface roughness was prepared by combining sepiolite (SEP) fibers and nano-montmorillonite (MMT) via a simple, environmentally friendly physical electrostatic adsorption method. Modified composite filler was prepared via surface treatment with the silane coupling agent. The composite materials were prepared through melt compounding with PA6, with a maleic anhydride grafted ethylene-based elastomer used as a compatibilizer. Compared with composites reinforced with the modified single SEP filler, those prepared with the modified composite filler exhibited significantly improved thermal and mechanical properties. When the nano-montmorillonite content was 1.5 wt%, the HDT of the composite containing SEPM-1.5 reached 172°C, which was 24°C higher than that of the composite containing only SEP, while the flexural strength and flexural modulus reached 145 and 5200 MPa, which increased by 31% and 38%, respectively. Non-isothermal crystallization kinetics analysis revealed that the micro-nano composite structure of SEP and MMT accelerated the ordered arrangement of PA6 molecular chains through heterogeneous nucleation, significantly increased the crystallization rate, and thus improved the material properties. Highlights Green electrostatic assembly of sepiolite and nano-MMT makes composite filler. Rough filler surface improves interfacial interlocking and PA6 insulation. Composite filler acts as nucleating agent to accelerate PA6 crystallization.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Yu Gao,Yugang Zhou,Shuaicai Wang,Tao Zhang,Ruina Zhang,Yanshuo Li,Wei Fang
The treatment of heavy metal-contaminated wastewater remains a critical challenge due to the coexistence of multiple metal ions and the lack of efficient recovery strategies. Herein, we report an H-type electrochemical membrane reactor that enables the sequential recovery of Pb 2+ and Zn 2+ from multicomponent wastewater while simultaneously driving chlor-alkali electrolysis. The system operates in a two-electrode configuration with a polysulfone-ZrO 2 composite membrane, which prevents cross-contamination between the compartments and stabilizes the local pH environment. In a solution containing 0.01 M Pb 2+ and 0.01 M Zn 2+ , Pb 2+ is preferentially reduced and deposited as fluffy lead with 99.3% recovery efficiency after 10 h of galvanostatic electrolysis at 10 mA cm −2 . When most of Pb 2+ is depleted, the hydrogen evolution reaction becomes dominant, raising the pH and inducing the precipitation of Zn 2+ as Zn(OH) 2 with 99.8% recovery efficiency, which is subsequently converted to ZnO. The membrane improves Pb 2+ /Zn 2+ recovery efficiencies and reduces energy consumption compared with the membrane-free system. The anode produces Cl 2 with Faradaic efficiency >95%, and the cathode generates H 2 (with Faradaic efficiency: from 1.6% at 1 h to 99.2% at 10 h) and NaOH. This integrated strategy offers a sustainable pathway for the stepwise recovery of metal resources from complex wastewater while co-generating valuable chemicals.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Xiao Zhu,Weitao Bian,Jing Zhong,Zhaoxiang Zhong
Airborne particulate matter (PM) pollution poses a serious threat to public health and the environment, underscoring the urgent need for advanced air filtration membranes that combine high efficiency with environmental sustainability. Although polylactic acid (PLA) nanofiber membranes (NFMs) are a promising eco-friendly potential, their electret instability and rapid performance decay limit practical application in air filtration. Inspired by the efficient predation mechanism of corals, we developed coral-like ZIF-8/PLA NFMs featuring a unique “skeleton-tentacle” architecture via controlled in situ secondary growth. This method enables precise regulation of ZIF-8 crystal size and distribution, maximizing active site exposure while preserving inter-fiber pores. The resulting ZIF-8/PLA NFMs exhibit a synergistic “electrostatic-adsorption, physical-interception, and chemical-interaction” capture mechanism, achieving a stable PM filtration efficiency of >99.78% over 2 h with only a moderate increase in pressure drop (from 155 to 217 Pa). The quality factor ( Q F ) reached 0.028 Pa −1 , which is 12 times higher than pure PLA NFMs. Moreover, the membranes also demonstrated excellent gas permeability (1214 m 3 ·m −2 ·h −1 ·kPa −1 ) and mechanical strength (4.0 MPa). In addition, the sterilization rates of ZIF-8/PLA NFMs against both E. coli and S. aureus reached 99.99%, indicating outstanding antibacterial performance. This work not only provides a high-performance, low-resistance, and sustainable air filtration membrane but also establishes a versatile biomimetic paradigm for integrating MOFs onto biodegradable polymers, thereby offering a promising route toward next-generation green filtration media.
✓ 已验证
产品关联
DOI
高影响因子
Biology-Basel
·
2026
·Vol. 15
·期 15
·1234
·
IF 4.3
Yan Xia,Zhonghong Li,Xudong Shen,Mingkang Chen,Yanfeng Zhao,Chuang Gao,Chuanqi Ren,Jianchun Zhang,Shuang Li,Bo Ma
Simple SummaryMacrobrachium rosenbergiiis an economically important species in freshwater aquaculture. However, climate change and rising sea levels are causing sudden increases in salt levels in farming areas, threatening their survival and regional economies. This study aimed to understand the internal survival strategies of adult prawns when exposed to sudden high salt conditions over a two-day period. By examining the active genes and metabolites in the prawns, researchers discovered that the animals shift from a quick stress response to a systemic physical adjustment. The results showed that to survive the salty environment, the prawns activate internal cell cleaning and repair systems while changing how they use fats and energy. Most importantly, they use a unique strategy to reduce the breakdown of specific amino acids, retaining these molecules to balance the intense outside salt pressure. In conclusion, these prawns survive extreme salt stress by combining cellular protection with a metabolite saving strategy. This research not only decodes the survival mechanisms of these prawns but also provides a basis for breeding salt-resistant varieties, helping the aquaculture industry better address the practical challenges posed by climate change.Salinity fluctuations pose a severe threat to the survival and physiological homeostasis of freshwater crustaceans. Here, an integrated transcriptomic and metabolomic approach was utilised to characterise the dynamic regulatory responses in the hepatopancreas of adultMacrobrachium rosenbergiisubjected to acute high-salinity stress (20‰). The number of differentially expressed genes (DEGs) and metabolites (DMs) increased from 24 to 48 h, signalling a transition from an initial acute stress reaction to systemic homeostatic remodelling. At the molecular level,M. rosenbergiiactivated autophagy (Atg8a) and p53 (TP53INP) signalling, alongside the reprogramming of lipid and nucleotide metabolism. Pathway analysis identified “alanine, aspartate, and glutamate metabolism” as a central regulatory node. Notably, the downregulation of the glutamate dehydrogenase gene (Gdh) alongside the accumulation of L-glutamate suggests a potential transcriptional-metabolic decoupling phenomenon, wherein the organism appears to prioritise the conservation of critical osmoregulatory effectors over their oxidative degradation. These findings detail the systemic adaptive responses ofM. rosenbergiito salinity fluctuations, providing candidate targets for the selective breeding of stress-resilient crustacean strains.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Future Foods
·
2026
·
IF 10.6
Cheng-Zhen Nie,Ji Wang,Xin- Yu Wu,Xu-Hui Huang,Lei Qin
In this study, fermented fish sausage was investigated as the research subject, with an innovative process employing partial fat substitute by egg yolk being adopted. The impact of replacing fat with egg yolk on product flavor and quality was systematically analyzed using multi-omics techniques, including flavoromics, lipidomics, and metabolomics. The 50% egg yolk substitution group exhibited optimal sensory acceptance. Moreover, it significantly reduced peroxide and TBARS values (P < 0.05). A total of 34 volatile flavor compounds were identified in this study, among which 10 key differential compounds formed the characteristic flavor profile. Lipidomic analysis revealed a significant enrichment of PC (16:0/18:1) as a core differential lipid. Alongside the dynamic changes in metabolites, including free amino acids and organic acids, these factors contributed to the unique flavor profile of the product. This study provides a theoretical foundation and technical pathway for the development of flavor-enhanced fermented fish products.
✓ 已验证
DOI
高影响因子
POLYMER COMPOSITES
·
2026
·
IF 4.9
Jiangying Li,Fujie Wang,Shuangqiao Yang,Qi Wang
Wind turbine blades are mainly composed of fiber-reinforced epoxy thermosets possessing highly crosslinked networks and extremely low chemical reactivity, which severely limits their recyclability. Conventional physical recycling converts blade waste into inert fillers, resulting in significant deterioration of composite performance. Here, solid-state shear milling (S3M) is employed to induce mechanochemical grafting of epoxy-functional molecules onto recycled blade powder, transforming it into a reactive component for thermosetting composites. Mechanochemical co-milling with ethylene glycol diglycidyl ether (EGDE) markedly enhances powder reactivity and interfacial compatibility during curing. Incorporation of 10 wt.% modified blade powder into glass fiber-reinforced polymer (GFRP) composites yields a tensile strength of 194.33 MPa, approaching that of pristine GFRP without recycled content. After surface modification with EGDE, the tensile modulus increases from 10.77 to 12.21 GPa. After surface modification with alkyl epoxy glycidyl ether (AEG) and EGDE, the ILSS increases significantly to 26.5 MPa and 26.7 MPa from 20.48 MPa, respectively. This work demonstrates a scalable mechanochemical strategy for converting thermoset composite waste into reactive feedstock, enabling high-value reutilization of decommissioned wind turbine blades and providing a practical pathway toward sustainable recycling of crosslinked polymer composites. Highlights S3M enables mechanochemical recycling of wind turbine blade (WTB) waste. Reactive epoxy groups are grafted onto WTB powder via S3M. EGDE modification enhances interfacial adhesion and powder reactivity.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Yaohui Zhu,Xijia Zhou,Xuyi Lu,Yarui Ji,Muniran Tuluhong,Jun Yin,Deqiu Zou
With the accelerated global energy transition, the intermittency and instability of renewable energy have become the core bottleneck restricting their large-scale application. Thermal energy storage (TES) technology systems are the key to solving this problem. However, single-type TES materials are difficult to meet the comprehensive needs in complex scenarios, and multi-type composite TES materials are the core solution to this dilemma. In this study, for the first time, a porous structured bulk “sensible heat - latent heat - thermochemical heat” trimodal TES material was successfully fabricated via the template sacrificial method, using Ca(OH) 2 and alkali-resistant Al Si microencapsulated phase change materials (Al Si MEPCMs) as the core components. This composite exhibits a thermal storage density of 897.38 J/g and a thermal conductivity of 0.89 W·m −1 ·K −1 . The porous structure formed by the template sacrificial method synergizes with Al Si MEPCMs: this synergy constructs a continuous high thermal conductivity network to enhance heat storage/release rates, while effectively alleviating material cracking caused by CaO agglomeration and volume expansion during thermal cycling. After 40 thermal cycles, the thermal storage density retention rate reaches 74.1%, showing excellent thermal cycle stability. This material realizes the efficient integration and performance complementarity of three heat storage forms. Compared with pure Ca(OH) 2 , its thermal conductivity is increased by 140.5%, and the cycle stability is significantly improved. It provides a new material scheme and technical path for the high efficiency of high-temperature TES systems, and has broad application prospects in fields such as solar thermal utilization and industrial waste heat recovery.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Lujia Zhang,Shenghong Yuan,Huibo Chu,Mengen Zhao,Qin Dai,Huanhuan Liu,Kefu Shi,Qingbin Guo,Xuanbo Liu,Qiaomei Zhu
Pea protein–arabic gum–gallic acid ternary particles were fabricated. • Lycopene-loaded Pickering emulsions were stabilized by ternary particles. • 0.25 mg/mL gallic acid strengthened interactions and particle assembly. • Encapsulation improved colloidal, thermal stability and lycopene bioaccessibility. A novel pea protein isolate nanoparticle-gum arabic-gallic acid (PPINs-AG-GA) ternary particle system was developed as a Pickering stabilizer for lycopene delivery. The effects of gallic acid (GA) concentration and oil volume fraction on particle structure, interfacial assembly, emulsion stability, and digestive behavior were systematically investigated. FTIR, fluorescence spectroscopy, and DSC demonstrated that GA enhanced hydrogen bonding, induced protein conformational rearrangement, strengthened intermolecular interactions, and improved thermal stability. At 0.25 mg/mL GA, Pickering emulsions exhibited the smallest droplet size (44.2 μm), highest interfacial adsorption efficiency (78.2%), encapsulation efficiency (96.7%), viscoelasticity, and thermal stability. Increasing the oil volume fraction (φ = 0.1–0.6) strengthened the gel network and enhanced emulsion stability. Although encapsulation improved lycopene bioaccessibility compared with bulk oil, higher GA concentrations or oil volume fractions suppressed lipid digestion and mixed micelle formation, reducing bioaccessibility. These findings provide a theoretical basis for designing protein-polysaccharide-polyphenol Pickering stabilizers for lipophilic bioactive delivery. Download: Download high-res image (276KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Materials
·
2026
·Vol. 19
·期 14
·3009
·
IF 3.7
Wenqiang Xu,Shuyue Tan,Di Deng,Bingbing Hu
HighlightsA lard-derived hydrophobic/zincophilic coating extends symmetric cell lifespan to >3500 h.Achieved 99.8% CE over 2400 cycles (Zn||Cu) and stable full-cell capacity of ~400 mAh·g−1for 800 cycles at 5 A·g−1.This scalable, low-cost bionic strategy fundamentally resolves dendrite growth and water-induced side reactions.It meets grid-scale storage demands and offers a generalized stabilization design for other highly active metal anodes.In order to solve the bottleneck problems of zinc anode in aqueous zinc-ion batteries, such as dendrite disorder growth, hydrogen evolution corrosion, and interface passivation, lard derivative coating (LDC) was fabricated on zinc anode using a coating–calcination process. The microstructure, surface physical, and chemical properties of LDC and its influence on zinc deposition behavior and interface stability were investigated using a combination of techniques, including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The LDC-modified Zn anode (LDC@Zn) delivers stable cycling for over 3500 h at 1 mA·cm−2/0.5 mAh·cm−2. In Zn||Cu asymmetric cells, an average coulombic efficiency of 99.8% is achieved over 2400 cycles, confirming highly reversible Zn plating/stripping behavior. Furthermore, the full cell maintains a reversible capacity of ~400 mAh·g−1after 800 cycles at 5 A·g−1, demonstrating excellent rate capability and long-term stability. Overall, this work innovatively demonstrates that the LDC interphase integrates hydrophobic suppression of side reactions and zincophilic regulation of Zn2+deposition within a single architecture, enabling a synergistic balance between interfacial stability and controlled ion transport, and providing a scalable strategy for stable Zn anodes and new insights into interfacial engineering.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·124002
·
IF 7.5
Mihebai Yilimulati,Dongyuan Zhang,Jieyu Wang,Zaimire Abudushalamu,Wentao Zhang,Nuzahat Habibul
The ecological effects of antibiotics at environmentally relevant low concentrations have attracted considerable attention, but how they regulate algal growth and influence bloom risks through selective, dose-dependent, and algae-specific mechanisms remains poorly understood. Moreover, most conventional toxicological studies have used high concentrations at the mg/L level, which are orders of magnitude higher than actual environmental concentrations (ranging from ng/L to μg/L). To address this gap, the present study systematically compared the selective effects and metabolic mechanisms of norfloxacin on the cyanobacterium Microcystis aeruginosa and the green alga Chlorella vulgaris under environmentally relevant concentrations. Low NOR concentrations (0.01–0.5 μg/L) stimulated the growth of Microcystis aeruginosa , increased its photosynthetic pigment content, enhanced photosystem activity, and activated metabolic pathways related to nucleotide and amino acid synthesis. Interestingly, higher NOR concentrations (5–100 μg/L) suppressed photosynthesis, induced oxidative stress, promoted the release of extracellular organic matter, and markedly disrupted central energy metabolism, including carbon fixation, glycolysis, the pentose phosphate pathway, and the tricarboxylic acid cycle. In contrast, Chlorella vulgaris exhibited greater tolerance, as evidenced by maintained photosynthetic homeostasis, moderate metabolic reorganization, and no significant fluctuation in cell abundance. These findings indicate that environmentally relevant concentrations of norfloxacin may selectively stimulate the growth of the cyanobacterium Microcystis aeruginosa through a “low-dose promotion, high-dose inhibition” pattern mediated by key metabolic pathways. The differential algae-specific responses suggest that norfloxacin pollution could potentially increase the risk of cyanobacterial blooms, although this possibility remains to be validated through co-culture or field studies.
✓ 已验证
产品关联
DOI
高影响因子
Foods
·
2026
·Vol. 15
·期 15
·2580
·
IF 6
Qi Zhang,Mengyan Jian,Yali Wang,Zimeng Wei,Yuehui Wang,Xiaoyu Bao,Wenping Ding
Rice glutelin hydrolysates (RGHs) with different degrees of hydrolysis (DH) were prepared using papain, and the structural characterization, physicochemical stability, and antioxidant activity of RGH were analyzed. Results showed that RGH primarily consisted of low molecular weight (MW) peptides (<3 kDa), with hydrophobic/aromatic amino acid content increasing with DH. Higher DH level led to reduced average particle size and zeta potential of RGH. Structurally, as DH increased, a decrease in α-helix content alongside increased β-sheet/random coil ratios was observed in RGH, indicating a transition towards a more disordered structure in RGH. Furthermore, the antioxidant activity of RGH was significantly enhanced with the increase in DH, with RGH-18 showing the highest bioactivity. RGH maintained stability and antioxidant capacity under gastrointestinal digestion as well as various environmental stresses, including varying pH and temperatures, and the presence of metal ions. Cellular experiments demonstrated that RGH-18 alleviated H2O2-induced oxidative damage in HepG2 cells, likely by inhibiting Keap1 and activating Nrf2 via the Keap1/Nrf2 pathway. This study supports the potential of RGH as a functional ingredient and provides insights for targeted rice peptide production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子