Science of Advanced Materials
·
2023
·Vol. 15
·期 6
·754-760
·
IF 0.9
Chen Lin,Zhang Hang,Fouad Hassan,Akhtar M. S.,Wang Zhihong
This study presents a straightforward hydrothermal synthesis technique for modifying the crystal size and shape of MIL-53(Al) via the use of a mixed solvent solution consisting of water and DMF. Without the use of coordination inhibitors or surfactants, a sequence of nanosized MIL-53(Al)
crystals was efficiently synthesized. The lowest crystal size we were able to achieve in this work was 100 nm, but present technologies are not suited to creating nanoscale crystals of this size. Large crystallinity and yield were attained, and the samples’ very large specific surface
areas expanded the usefulness of this MOF material for gas adsorption and storage. X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, nitrogen gas adsorption/desorption, and infrared spectroscopy were all used to characterize the samples. Finally, the effect of moisture
concentration on crystal size and shape was investigated.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 89
·73068-73076
·
IF 3.84
Lifang Zhu,Hongwei Yu,Huijuan Zhang,Jiangnan Shen,Lixin Xue,Congjie Gao,Bart van der Bruggen
Aromatic poly(m-phenyleneisophthalamide) (PMIA) and the metal-organic framework (MOF) MIL-53(Al) were employed as the polymer matrix and additive, respectively, to develop mixed matrix membranes (MMMs) via non-solvent induced phase separation for potential application in organic solvent nanofiltration. The prepared membranes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and water contact angle measurements. The membrane water permeance enhanced when MIL-53(Al) was incorporated into the membrane structure while the rejection had no significant change. The optimum MMM (with 0.5 wt% MOF concentration) passes mono and bivalent inorganic salts but rejects larger charged organic molecules and has a mean effective pore size of 0.7 nm. The influence of organic solvents on MMM performance was also investigated and the result shows that the performance shifts towards a lower pure water permeance and a higher rejection after exposure to organic solvents (ethyl acetate or methanol). The membrane performance in organic solvent nanofiltration was evaluated on the basis of the permeance and rejection of brilliant blue G in ethanol, and the result showed that the permeance of MMMs significantly increased (by 289%) while the rejection slightly reduced by 4% in contrast to the pure membrane.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
CRYSTENGCOMM
·
2012
·Vol. 14
·期 17
·5487-5492
·
IF 3.842
Feng Zhang,Xiaoqin Zou,Fuxing Sun,Hao Ren,Yuan Jiang,Guangshan Zhu
A thin film of MIL-53(Al) on the activated Al slice has been prepared successfully. The crystals in the films exhibit high phase purity and a preferential orientation with straight channel network (or (h0l) planes) of the crystals parallel to the support surface, which are studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The loading of organic (2-(2-hydroxyphenyl)-pyridine) (PP) fluorescent molecules in the film has been accomplished. The behaviours of the fluorescent molecules assembled in the pores of the oriented crystals are probed by Fourier transform infrared (FT-IR) and fluorescence spectroscopies.
研究领域:
材料科学
·
纳米技术
·
生物医学工程
·
药物递送
·
表面科学
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Xin-Ru Chen,Heng Mao,Qiu-Ying Zhang,Wei-Min Liu,Shen-Hui Li,Qian-Qian Li,Li-Hao Xu,Yan-Mei Zhang,Xin-Yue Zhang,Jun-Jie Liu,Ao Kou,Zhi-Ping Zhao
Interfacial engineering in mixed matrix membranes (MMMs) is essential to attain superior separation performance and ensure long-term operational stability. In this research, a range of novel MMMs were designed and fabricated for pervaporation (PV) separation of n-butanol/water solution by introducing the MIL-53(Al) particles and three variants (i.e., MIL-53(Al)–NH 2 , MIL-53(Al)–NO 2 , MIL-53(Al)–OH) into PEBA polymer matrix. These four MIL-53(Al) counterparts were synthesized via a microwave-assisted solvothermal method by selectively functionalizing the terephthalic acid linkers with different chemical groups. The functional MIL-53(Al) variants were employed to explore the relationship between membrane microstructures and PV performance by manipulating the interfacial interactions with PEBA matrix. The findings reveal that incorporating MIL-53(Al) variants not only displayed excellent interfacial compatibility and uniform dispersion within PEBA matrix, but also constructed the preferential transport pathways for n-butanol over water molecules. Impressively, in a 1 wt% n-butanol aqueous solution at 40 °C, the resultant membrane attained a permeation flux of 1483.3 g·m -2 ·h -1 and a separation factor of 18.1. Compared to the PEBA/PVDF membrane, the total flux was enhanced by 17.1 %, and the separation factor was improved by 46.4 %. Moreover, the embedding MIL-53(Al) variants boosted thermal and mechanical properties of the membrane, endowing it with considerable potential for practical applications.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2020
·Vol. 26
·期 4
·1787-1795
·
IF 2.394
Ge Zhi,Li Jie,Liu Jin
A flexible PEO-NaCF 3 SO 3 -MIL-53(Al) solid electrolyte is fabricated for all-solid-state sodium-sulfur batteries (ASSBs). When the mole ratio of EO (ethylene oxide of PEO):Na (sodium ion of NaCF 3 SO 3 ) is 20 and MIL-53(Al) is 3.24 wt%, high ionic conductivities of 6.87 × 10 −5 S cm −1 at 60 °C and 6.52 × 10 −4 S cm −1 at 100 °C are achieved. And the sodium ion transference number is significantly increased to 0.40 from 0.13 compared to the PEO-NaCF 3 SO 3 solid electrolyte without MIL-53(Al). When it is assembled to ASSBs, the batteries obtain high capacity retention and reversible current-rate capability. At 0.1 C and 60 °C, the solid-state battery delivers the first discharge capacity of 897.7 mAh g −1 and 674.9 mAh g −1 after 50 cycles with a coulombic efficiency near 100%. The enhanced electrochemical performances of the solid electrolyte, as well as ASSBs, are benefited from MIL-53(Al) filler.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2021
·
IF 2.495
Ying-yue Qin,Qiao-ying Wang,Jin-Long Ge,Fang Wu
Amino-MIL-53(Al) (NH 2 -MIL-53(Al)) nanocrystals were successfully obtained through microwave ultrasound-assisted method. The structure and morphology of the as-synthesized NH 2 -MIL-53(Al) nanocrystals were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and N 2 adsorption–desorption isotherms, respectively. Upon excitation at 388 nm, the as-synthesized NH 2 -MIL-53(Al) nanocrystals show strong emission peak at 454 nm in n-octane solution at room temperature. Meanwhile, the fluorescence explorations revealed that NH 2 -MIL-53(Al) can selectively detect organosulfur compounds, including thiophene and benzothiophene through quenching effect in model fuel, with high quenching constant and low detection limit. This work presents a facile platform for the detection of organosulfur compounds in model fuel.
研究领域:
材料科学
·
化学
✓ 已验证
DOI
高影响因子
TALANTA
·
2025
·
IF 6.1
Qiaoli Yang,Xiao Yang,Ke Guo,Guangrui Pan,Qiuzheng Du,Liang Ming,Wanhai Wang
Pseudomonas aeruginosa (PA) infection poses a significant threat to human health and the economy, with the issue of drug resistance becoming increasingly severe. How to quickly, accurately, and inexpensively detect PA and differentiate live bacteria from dead ones is crucial for clinical follow-up treatment. To this end, we have developed a biosensor based on fluorescent metal-organic frameworks (MOFs) (Eu 3+ @MIL-53(Al)) and specific-phages for PA detection, where the Eu 3+ @MIL-53(Al) prepared by one-pot method exhibits excellent fluorescence properties. By covalently binding specific phages isolated from hospital wastewater to the EuMOF surface, we constructed a fluorescent biosensor capable of detecting PA within 15 min, with a sensitivity threshold of 2 CFU/mL. Notably, this biosensor demonstrates high specificity, accurately quantifying live PA in complex bacterial mixtures and distinguishing live from dead bacteria. Its practical application has been validated in clinical blood and stool samples. As a novel platform for clinical microbial monitoring, the Eu 3+ @MIL-53(Al)-phage biosensor not only holds substantial economic potential but also carries significant public health implications.
研究领域:
微生物学
·
医学检验
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2025
·
IF 4.7
Ying Wang,Tengfei He,Jingguo Cao,Ke Li,Chengqian Wang,Qun Liu,Yu Zhang
This study demonstrates a sustainable strategy for synthesizing MIL-53(Al) and ZSM-5 zeolite through dual-waste synergy using coal fly ash (CFA) and waste polyethylene terephthalate (PET). A sequential alkaline fusion-acid leaching protocol selectively fractionated CFA into aluminum-rich solutions and silica residues, while alkaline hydrolysis of PET liberated terephthalic acid (PTA) as organic ligands. The Al 3+ -PTA coordination under solvothermal conditions produced MIL-53(Al)(CFA-PET) exhibiting well-defined 1D rhombic channels with a high BET surface area (1303 m 2 ·g −1 ), whereas hydrothermal crystallization of silica residues yielded ZSM-5(CFA), which formed spherical aggregates composed of 100 nm nanosheets with 89.9 % yield and a surface area of 311 m 2 ·g −1 . Structural advantages were evidenced by exceptional adsorption performance: MIL-53(Al)(CFA-PET) achieved 96.24 % methylene blue removal at pH 7 (250 mg·L −1 ), outperforming rhodamine B (30.8 %) and methyl orange (66.4 %), as well as reagent-synthesized MIL-53(Al) Che (91.99 %). Both materials demonstrated exceptional CO 2 capture capacities (4.23 mmol·g −1 for MIL-53(Al)(CFA-PET) vs. 2.37 mmol·g −1 for ZSM-5(CFA) at 273 K/1 bar), attributable to MIL-53′s flexible framework enabling dynamic pore adjustment and ZSM-5′s rigid microporous channels favoring molecular sieving. This work establishes a closed-loop strategy for converting industrial and plastic wastes into functionally differentiated porous materials through element-targeted process design.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
ANALYST
·
2020
·Vol. 146
·期 4
·1295-1302
·
IF 3.978
Defen Feng,Fucun Wei,Yeyu Wu,Xuecai Tan,Fang Li,Yongkuai Lu,Gaochao Fan,Heyou Han
An ultrasensitive electrochemiluminescence (ECL) biosensor was developed based on MIL-53(Al)@CdS QDs and SiO2@AuNPs for trichlorfon detection. Metal–organic frameworks (MOFs) were used as a loading platform that provided a large surface area to load targets and modified materials onto the electrode. At the same time, SiO2@AuNPs loaded plenty of AuNPs which effectively increased the ECL resonance energy transfer between the CdS QDs, so that the ECL signal was strongly quenched and resulted in an amplified response. In the range of 10−11–10−4 M, the ECL response showed a linear relationship with the concentration (logarithm) of trichlorfon, and the detection limit was 5.1 × 10−12 M (S/N = 3). When the biosensor was applied to detect trichlorfon in lettuce, broccoli, cucumber, and chives, the recoveries obtained from the spiked samples were 97%–105%, 102%–104%, 100%–104%, and 98%–104%, respectively. Thus, this novel ECL biosensor has potential applications for the analysis of trichlorfon in food samples.
研究领域:
分析化学
·
环境科学
·
材料科学
·
食品安全
✓ 已验证
DOI
PubMed
高影响因子
MOLECULES
·
2020
·Vol. 25
·期 4
·897
·
IF 3.267
Qian-Chun Zhang,Guang-Ping Xia,Jun-Yi Liang,Xiao-Lan Zhang,Li Jiang,Yu-Guo Zheng,Xing-Yi Wang
In this study, a novel monolithic capillary column based on a NH2-MIL-53(Al) metal–organic framework (MOF) incorporated in poly (3-acrylamidophenylboronic acid/methacrylic acid-co-ethylene glycol dimethacrylate) (poly (AAPBA/MAA-co-EGDMA)) was prepared using an in situ polymerization method. The characteristics of the MOF-polymer monolithic column were investigated by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffractometry, Brunauer-Emmett-Teller analysis, and thermogravimetric analysis. The prepared MOF-polymer monolithic column showed good permeability, high extraction efficiency, chemical stability, and good reproducibility. The MOF-polymer monolithic column was used for in-tube solid-phase microextraction (SPME) to efficiently adsorb trace sulfonamides from food samples. A novel method combining MOF-polymer-monolithic-column-based SPME with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was successfully developed. The linear range was from 0.015 to 25.0 µg/L, with low limits of detection of 1.3–4.7 ng/L and relative standard deviations (RSDs) of < 6.1%. Eight trace sulfonamides in fish and chicken samples were determined, with recoveries of the eight analytes ranging from 85.7% to 113% and acceptable RSDs of < 7.3%. These results demonstrate that the novel MOF-polymer-monolithic-column-based SPME coupled with UHPLC-MS/MS is a highly sensitive, practical, and convenient method for monitoring trace sulfonamides in food samples previously extracted with an adequate solvent.Keywords:monolithic capillary column;metal-organic framework;sulfonamides;solid-phase microextraction;ultra-high performance liquid chromatography-tandem mass spectrometry
研究领域:
分析化学
·
食品科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TURKISH JOURNAL OF CHEMISTRY
·
2022
·Vol. 46
·期 4
·1281-1290
·
IF 1.151
WANG JI,WANG QINGYIN,WANG GONGYING
Poly(ethylene terephthalate) (PET) is one of the world's five major engineering plastics and is widely used in various fields. At present, the main catalysts used in the synthesis of PET are antimony, titanium, and aluminum metal compounds. Among them, antimony-based catalysts are poisonous and the titanium-based catalyst products are relatively yellow in hue. The aluminum-based catalyst has the advantages of low price and environmental friendliness, but current research shows that the organoaluminum catalyst has the problem of hydrolysis, and MIL-53 (Al) has good stability and will not affect the environment, so we add a catalyst before the esterification reaction, and uses thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscope (SEM), and N2 low-temperature physical adsorption characterizes the thermal stability and structure of MIL-53(Al). At the same time, the effects of different content, polycondensation time, before and after activation and polycondensation temperature on the properties of PET were investigated. The research results show that when the molar content of catalyst is 0.05% and the reaction temperature is 280 oC for 150 min, the product obtained is relatively excellent. The catalytic activity has almost no effect before and after activation, indicating that the polycondensation reaction is carried out on the surface of the catalyst. Therefore, MIL-53 (Al) has great potential in PET industrial catalysis.
✓ 已验证
DOI
高影响因子
MEASUREMENT SCIENCE and TECHNOLOGY
·
2022
·Vol. 34
·期 2
·025106
·
IF 2.398
Qianchun Zhang,Qin Zhou,Yun Wu,Yanxin Li,Fengling Tian,Shan Tang,Li Jiang
In this study, MIL-53(Al) and Sb2SnO5 were synthesized by hydrothermal and precipitation methods, respectively. The doped MIL-53(Al)/Sb2SnO5 showed excellent catalytic properties, specifically for selectivity and sensitivity for isobutanol (IBN). To assess the catalytic properties of MIL-53(Al)/Sb2SnO5, an IBN gas sensor based on cataluminescence of MIL-53(Al)/Sb2SnO5 was developed, and it demonstrated detection of IBN with high sensitivity, high specificity, fast detection, and good stability. The signal response and recovery time of IBN gas sensor were 0.5 s and 6 s, respectively, and a good linear relation was 0.050–2.5 μg ml−1 (R2 = 0.9956) with a low detection limit of 0.015 μg ml−1. Further, the IBN sensor applied in the detection of real samples had satisfactory recoveries (90.0%–108%) with relative standard deviations of 3.2%–6.7%. The developed sensor based on MIL-53(Al)/Sb2SnO5 has great prospects for the practical detection of IBN gas in the fields of environmental analysis, safety monitoring, etc.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）