青霉素-链霉素-卡那霉素溶液 (100×, 无菌)

货号: P1509612
有货
级别和纯度: 无菌过滤 ? 除菌过滤 —— 经 0.2µm 过滤去除微生物。作为即用无菌溶液用于培养和敏感应用。 BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 用于细胞培养 ? 细胞培养级 —— 内毒素和污染物低,支持细胞存活生长。适用于哺乳动物/其他细胞培养基和添加剂。 100×
别名
青霉素-链霉素-卡那霉素溶液
储存条件
避光,-20°C储存
运输条件
超低温运输
应用
Cell Culture
★
规格
库存
价格
数量
100ml
P1509612-100ml
现货 Stock Image
¥319.90
请输入您要添加的产品数量

概述

  细胞培养基中加入适量浓度的抗生素,可以有效防止微生物的污染,目前最常采用的抗生素为青霉素-链霉素混合溶液 (100×, 双抗),而青霉素-链霉素-卡那霉素溶液 (100×, 无菌)是专门用于细胞培养的三抗。

  青霉素-链霉素-卡那霉素溶液 (100×, 无菌) (Penicillin-Streptomycin-Kanamycin Solution, 100×)中含有10 KU/ml青霉素、10 mg/ml链霉素和10 mg/ml卡那霉素,用0.9% NaCl或PBS配制而成,经过滤除菌,可以直接添加到细胞培养液内用于细胞培养,可抑制革兰氏阳性菌、革兰氏阴性菌和支原体的活性。一个包装即100ml 100×三抗可配制10L细胞培养液。该试剂仅用于科研领域,不适用于临床诊断或其他用途。

操作步骤 (仅供参考):

青霉素-链霉素-卡那霉素混合溶液 (100×, 无菌)可以参考如下两种方法之一使用:

1、在无菌的细胞培养液中直接添加:按照每500ml细胞培养液添加5ml的比例加入青霉素-链霉素-卡那霉素混合溶液 (100×, 无菌),混匀即可使用。

2、配制细胞培养液时加入,然后再过滤除菌:配制细胞培养液时按照每配制1L细胞培养液加入10ml的比例加入青霉素-链霉素-卡那霉素混合溶液 (100×, 无菌),配制完成后过滤除菌即可使用。

注意事项:

1、尽量减少反复冻融的次数,以免效率下降。

2、试剂开封后请尽快使用,以防影响后续实验效果。

3、注意无菌操作,尽量避免污染。

4、为了您的安全和健康,请穿实验服并戴一次性手套操作。

  Adding an appropriate concentration of antibiotics to the cell culture medium can effectively prevent microbial contamination. At present, the most commonly used antibiotic is Penicillin-Streptomycin Solution (100×, Sterile), while Penicillin-Streptomycin-Kanamycin Solution (100×, Sterile) is a dedicated triple-antibiotic reagent for cell culture.
  Penicillin-Streptomycin-Kanamycin Solution (100×, Sterile) contains 10 KU/mL penicillin, 10 mg/mL streptomycin and 10 mg/mL kanamycin. Formulated in 0.9% NaCl or PBS and sterilized by filtration, it can be directly added to the cell culture medium for cell culture, and is capable of inhibiting the activity of Gram-positive bacteria, Gram-negative bacteria and mycoplasma. One package, i.e., 100 mL of 100× triple antibiotics, can be used to prepare 10 L of cell culture medium. This reagent is for research use only and is not suitable for clinical diagnosis or any other purposes.
Operating Procedures (for reference only)
Penicillin-Streptomycin-Kanamycin Solution (100×, Sterile) can be used by either of the following two methods:
1. Direct addition to sterile cell culture medium: Add the Penicillin-Streptomycin-Kanamycin Solution (100×, Sterile) at a ratio of 5 mL per 500 mL of cell culture medium, and mix well before use.
2. Addition during medium preparation followed by filtration sterilization: Add the Penicillin-Streptomycin-Kanamycin Solution (100×, Sterile) at a ratio of 10 mL per 1 L of cell culture medium during the preparation process. Sterilize the prepared medium by filtration before use.
Precautions
1. Minimize the number of freeze-thaw cycles to avoid activity reduction.
2. Please use the reagent as soon as possible after opening to prevent adverse effects on subsequent experimental results.
3. Follow strict aseptic technique to avoid contamination as much as possible.
4. For your safety and health, wear a lab coat and disposable gloves during operation.

规格

别名
青霉素-链霉素-卡那霉素溶液
英文别名
Penicillin-Streptomycin-Kanamycin Solution
规格或纯度
无菌过滤,BioReagent,用于细胞培养,100×
稳定性与储存
Store at -20℃ long term (12 months). Store in the dark.
英文名称
Penicillin-Streptomycin-Kanamycin Solution (100×, Sterile)
储存条件
避光,-20°C储存
运输条件
超低温运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

高级数据

化学和物理性质
敏感性
Light-sensitive
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到1个结果

批号(Lot Number) 证书类型 货号
ZJ26F0332989ZJ26F0332989 分析证书 P1509612
技术文档和文章
溶液计算器