PBDB-T-2F

CAS: 1802013-83-7 货号: P486798 分子式: (C68H76F2O2S8)n
有货
级别和纯度: Mn>30000
储存条件
室温
★
规格
库存
价格
数量
5mg
P486798-5mg
期货 Stock Image
¥415.90
25mg
P486798-25mg
现货 Stock Image
¥1,599.90
100mg
P486798-100mg
现货 Stock Image
¥4,400.90
请输入您要添加的产品数量
🧪
为什么选择此级别

,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

室温。 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

高效有机太阳能电池 (OPV)
聚合物供体材料
LUMO=−3.6 eV
HOMO=−5.5 eV
OPV设备性能:
PBDB-T-2F:ITIC-F (1:1 w/w)
Voc= 0.84V
Jsc= 22.2 mA/cm2
FF= 0.725
PCE=13.5%
PBDB-T-2F(或PM6)是一种包含氟化噻吩基苯并二噻吩(BDT-2F)的宽带隙聚合物供体(N型半导体),用于高性能聚合物太阳能电池(PSC)。PBDB-T-2F具有高结晶性和强烈的π-π堆积排列,有利于电荷载流子的传输,从而抑制了器件中的重组。据报道,基于PBDBT-2F的PSC具有厚度和面积不敏感的性能,并且是大规模滚动制造高效聚合物太阳能电池的有前途的候选者。
例如,最近,新的研究表明,基于pBDB-T-2F:IT-4F的PSC产生了令人印象深刻的PCE,为13.5%,这是由于供体和受体上氟化的协同效应,这是迄今为止PSC文献中记录的最高值之一。基于PBDB-T-2F:IT-4F的PSC相对于有效性也显示出良好的存储,热和照明稳定性。在广泛的膜面积和厚度范围内,高效性保持在>11%。当与基于硒代苯[3,2-b]噻吩的窄带隙非富勒烯受体配对时,获得了令人印象深刻的13.3%的有效性,具有厚度不敏感的特征。
以前也有报道,PBDB-T-2F与窄带隙小分子受体2,2′-((2Z,2′Z)-((4,4,9,9-四己基-4,9-二氢-s-茚并[1,2-b:5,6-b′]二噻吩-2,7-二基)双(亚甲基))双(3-氧代-2,3-二氢-1H-茚-2,1-二亚基))二丙二腈(IDIC),铸态薄膜(未经额外处理)显示出11.9%[1]的出色功率转换有效性(PCE),是铸态聚合物太阳能电池的记录值。此外,基于PBdB-T-2F:IDIC的器件的性能对有源层厚度(≅95-255 nm)和器件面积(0.20-0.81 cm2)不敏感,因此是未来卷到卷的有希望的候选者批量制造和高效PSC的实际应用。
PBDB-T-2F在300-685 nm的短波长范围内具有很强的吸收,具有1.80 eV的大带隙,与ITIC(1.55 eV)互补,有助于实现PSC中的高短路电流(Jsc)。此外,PBDB-T-2F显示出−5.50 eV的深HOMO水平,强结晶性和堆积的主要面,这有助于在PSC中实现高开路电压(Voc)并填充因子(FF)。

High-Efficiency Organic Solar Cells (OPVs)
Polymeric donor material
LUMO=−3.6 eV
HOMO=−5.5 eV
OPV Device Performance:
PBDB-T-2F: ITIC-F (1:1 w/w)
Voc= 0.84V
Jsc= 22.2 mA/cm2
FF= 0.725
PCE=13.5%
PBDB-T-2F (or PM6) is a wide bandgap polymer donor (n-type semiconductor) containing fluorinated thienyl benzodithiophene (BDT-2F) used in high performance polymer solar cells (PSCs). PBDB-T-2F possesses high crystallinity and strong π-π stacking alignment, which are favourable to charge carrier transport and hence suppress recombination in devices. PBDBT-2F based PSCs were reported to have thickness and area insensitive performance and is a promising candidate for large-scale roll-to-roll manufacturing of high-efficiency polymer solar cells.
For example, recently, new study have shown PBDB-T-2F:IT-4F based PSCs yielded an impressive PCE of 13.5% due to the synergistic effect of fluorination on both donor and acceptor, which is among the highest values recorded in the literatures for PSCs to date . The PBDB-T-2F:IT-4F baed PSCs also showed good storage, thermal and illumination stabilities with respect to the efficiency. High efficiency of >11% was maintained for a wide range of film area and thickness. When paired with selenopheno[3,2-b]thiophene-based narrow-bandgap non-fullerene acceptor, an impressive efficiency of 13.3 % was obtained with thickness-insensitive feature.
It has also been previously reported, PBDB-T-2F when paired with narrow band-gap small molecule acceptor 2,2′-((2Z,2′Z)-((4,4,9,9-tetrahexyl-4,9-dihydro-s-indaceno[1,2-b:5,6-b′]dithiophene-2,7-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (IDIC), the as-cast film (without extra treatments) showed an outstanding power conversion efficiency (PCE) of 11.9%[1], a record value for as-cast polymer solar cells. Moreover, the performance of PBDB-T-2F:IDIC based devices is insensitive to the active layer thickness (≅95-255 nm) and device area (0.20-0.81 cm2), and thus is a promising candidate for future roll-to-roll mass manufacturing and practical application of highly efficient PSCs.
It has also been reported, PBDB-T-2F possesses a strong absorption in the short wavelength region of 300-685 nm with a large bandgap of 1.80 eV, which is complementary to that of ITIC (1.55 eV) and facilitates achieving high short-circuit current (Jsc) in PSCs. Moreover, PBDB-T-2F shows a deep HOMO level of −5.50 eV, a strong crystallinity and a dominant face on packing, which helps to achieve a high open-circuit voltage (Voc) and fill factor (FF) in PSCs.

规格

英文别名
PCE135 | PM6 | Poly[[4,8-bis[5-(2-ethylhexyl)-4-fluoro-2-thienyl]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl]-2,5-thiophenediyl[5,7-bis(2-ethylhexyl)-4,8-dioxo-4H,8H-benzo[1,2-c:4,5-c′]dithiophene-1,3-diyl]-2,5-thiophenediyl]
规格或纯度
Mn>30000
英文名称
PBDB-T-2F
储存条件
室温
名称和识别符
分子类型
小分子

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

化学和物理性质
溶解性
氯;苯:可溶;氯仿:可溶;二氯苯:可溶
闪点(℉)
Not applicable
闪点(℃)
Not applicable
安全和危险性(GHS)
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到6个结果

批号(Lot Number) 证书类型 货号
F23271353 分析证书 P486798
F23271354 分析证书 P486798
A2627061 分析证书 P486798
F2418152 分析证书 P486798
F23271348 分析证书 P486798
F23271349 分析证书 P486798
技术文档和文章
溶液计算器