PreScission蛋白酶 (PSP)

货号: P749387
有货
级别和纯度: 生物活性 ? 生物活性级(Bioactive)—— 经验证在功能检测中保持生物活性。当分子须具有功能活性而不仅是纯度时使用。 重组 ? 重组(Recombinant)—— 通过重组表达生产,序列确定、批次稳定。适用于来源明确、无动物源的可重现蛋白。 EnzymoPure™ ? EnzymoPure™ —— 阿拉丁的高质量酶解决方案系列。当酶纯度和明确活性决定检测或工艺性能时使用。 GST标签 ? 谷胱甘肽巯基转移酶(GST) 标签级 —— 带有 GST 标签的重组蛋白,供亲和纯化/检测。用于纯化、固定或检测带标签蛋白。 ≥90%(SDS-PAGE) 大肠杆菌表达;1 U/μL, 1 mg/mL
Accession #
P03303
蛋白标签
N-GST
表达系统
E. coli
生物活性
1 U/μL
★
规格
库存
价格
数量
100U
P749387-100U
期货 Stock Image
¥149.90
500U
P749387-500U
期货 Stock Image
¥499.90
1KU
P749387-1KU
期货 Stock Image
¥799.90
5KU
P749387-5KU
期货 Stock Image
¥2,999.90
请输入您要添加的产品数量

概述

PreScission Protease (PSP) 为鼻病毒的 3C 蛋白酶(Human Rhinovirus 3C Protease)的原核表达产物,特异识别短肽 Leu-Phe-Gln/Gly-Pro,并在 Gln 和 Gly 残基之间进行切割。该酶可以识别 pGEX-6P-1、pGEX-6P-2、pGEX-6P-3 等载体内带有的酶识别序列(LFQ/GP),可以把 GST 标签和融合的目标蛋白切开。酶识别序列(LFQ/GP)也可以通过克隆的方法接入其它载体中。在切割反应过程中,建议先用不同的切割时间摸索最佳条件,用 SDS-PAGE 电泳来评估切割程度。完全消化 GST 融合蛋白 PreScission Protease 的用量,温度和温浴的时间要根据不同的目标蛋白而进行改变,应该在实验过程中优化切割条件。重组酶 N 端带有 GST 标签,使得溶液状态酶切反应完后,可以通过 Glutathione Beads去除。当进行柱酶切时,则可以将目的蛋白从固定在介质上的融合蛋白上直接切下。该产品不提供酶切的缓冲液。

酶切缓冲液: 50 mM Tris,150 mM NaCl,1 mM EDTA,1 mM DTT,pH 7.0。

操作步骤

一、柱上酶切

1. 按照实验室条件对目的蛋白进行破碎、介质结合和洗杂,不要洗脱;

2. 确保用 10 倍以上柱体积的洗杂缓冲液充分洗涤上样介质,注意将管壁上残留上样液洗去;

3. 按照每 ml 介质使用 40 μl PreScission Protease (PSP) 进行酶切,注意 40 μl PreScission Protease 需用 2 ml 酶切缓冲液溶解,然后把配制好的酶加到清洗完的介质中并轻轻混匀,于适当温度条件轻轻震荡反应过夜(推荐的反应条件为 5℃酶切 16 小时);

4. 柱子直立静置 30 分钟以上,收集柱中的流出液,溶液中含有目标蛋白。可以补加少量缓冲液洗柱,获得更多的目标蛋白。柱上残余部分,可以使用常用的咪唑洗脱方法洗脱,并电泳估计酶切效率。

二、洗脱后酶切

1. 用还原型谷胱甘肽把 GST 融合蛋白从 Glutathione Beads 上洗脱,用酶切缓冲液进行充分透析,除去谷胱甘肽;

2. 每 mg 融合蛋白中加入 10 μl PreScission Protease,如果融合蛋白的量不能确定,就按照每毫升洗脱液加入 40 μl PreScission Protease,4℃酶切过夜(16 小时左右);

3. 当酶切完成之后,用 Glutathione Beads,除去 GST 标签和 PreScission Protease,流出液含有目标蛋白。

补充信息

1. PreScission Protease酶切条件优化

PreScission Protease 属于 3C 蛋白酶家族,不需要金属离子或者辅酶参与活性,但活性中心有半胱氨酸参与,需要维持一定的还原性反应条件(0.1-1 mM DTT 或者 2-ME 就足够了)。这一类酶的识别序列包括了蛋白酶切位点上下游的多个残基(4-6 个),因此有良好的特异性。重组酶本身是和 GST 标签融合的,因此酶切完成以后可以被 Glutathione Beads 吸附而除去。通常可以选择在柱酶切或者洗脱后酶切,但两者的效率有很大差别(洗脱酶切效果更好,但稍微麻烦一些),下表是酶切时需要注意的一些条件,供参考。

组分条件
PreScission Protease (PSP) 
≥10 U/mg GST fusion protein
pH7-8
Dithiothreitol0.1-1 mM
NaCl0-500 mM
EDTA0-10 mM
Detergents (Triton-x100;Tween-20;Nonidet P-40)0-1%
Temperature4-37℃

2. PreScission蛋白酶的抑制剂

蛋白酶通常可以被一些特异性的抑制剂抑制活力,进行酶切反应时请参考下表。

试剂浓度抑制程度
ZnCl₂100 mM> 50%
Pefabloc 7SC4 mM> 50%
Chymostatin100 μM> 50%
Antipain dihydrochloride74 μM< 20%
Aprotinin0.3 μM< 20%
Bestatin130 μM< 20%
E-6428 μM< 20%
Leupeptin1 μM< 20%
Pepstatin1 μM< 20%
Phosphoramidon0.6 mM< 20%
PMSF1 mM< 20%
ZnCl₂10 mM< 20%

PreScission Protease (PSP) is a prokaryotic expression product of Human Rhinovirus 3C Protease. It specifically recognizes the short peptide Leu-Phe-Gln/Gly-Pro and cleaves between the Gln and Gly residues. This protease can recognize the enzyme recognition sequence (LFQ/GP) carried in vectors such as pGEX-6P-1, pGEX-6P-2 and pGEX-6P-3, and cleave the GST tag from the fused target protein. The protease recognition sequence (LFQ/GP) can also be cloned into other vectors.

During cleavage reaction, it is recommended to explore optimal conditions with different incubation times, and assess cleavage efficiency by SDS-PAGE. The dosage of PreScission Protease, temperature and incubation time for complete digestion of GST fusion protein vary with different target proteins, and cleavage conditions should be optimized during experiments. The recombinant enzyme carries an N-terminal GST tag, so it can be removed by Glutathione Beads after solution-phase cleavage. For on-column cleavage, the target protein can be directly cleaved from the fusion protein immobilized on the resin. This product does not come with cleavage buffer.

Cleavage Buffer: 50 mM Tris, 150 mM NaCl, 1 mM EDTA, 1 mM DTT, pH 7.0.

Procedure

1. On-column Cleavage

① Lyse the sample, load the fusion protein onto resin and wash away impurities according to your lab protocol, **do not elute**;

② Wash the resin with at least 10 column volumes of wash buffer thoroughly to remove residual loading sample on the tube wall;

③ Add 40 μl PreScission Protease per mL resin. Dilute 40 μl PreScission Protease with 2 mL cleavage buffer, mix gently with washed resin, and incubate with gentle shaking at appropriate temperature overnight (recommended condition: 5 ℃, 16 h);

④ Let the column stand for ≥30 min, collect flow-through which contains target protein. Additional buffer can be used to rinse the column to recover more target protein. Remaining protein on resin can be eluted by conventional imidazole elution method, and cleavage efficiency can be estimated by electrophoresis.

2. Post-elution Cleavage

① Elute GST fusion protein from Glutathione Beads with reduced glutathione, then dialyze thoroughly against cleavage buffer to remove glutathione;

② Add 10 μl PreScission Protease per mg fusion protein. If the quantity of fusion protein is unknown, add 40 μl PreScission Protease per mL eluate, incubate at 4 ℃ overnight (around 16 h);

③ After cleavage, add Glutathione Beads to remove GST tag and PreScission Protease. The flow-through contains target protein.

Supplementary Information

1. Optimization of PreScission Protease Cleavage Conditions

PreScission Protease belongs to the 3C protease family. It does not require metal ions or cofactors for activity. Its active site contains cysteine, so reducing conditions are required (0.1–1 mM DTT or 2-ME is sufficient). The recognition sequence of this protease covers multiple residues (4–6 residues) flanking the cleavage site, which grants high specificity. The recombinant enzyme is fused with GST tag, so it can be captured and removed by Glutathione Beads after digestion.

Both on-column cleavage and post-elution cleavage are available, while their efficiency differs greatly (post-elution cleavage performs better but is more labor-intensive). The table below lists key parameters for reference:

ComponentCondition
PreScission Protease
≥10 U/mg GST fusion protein
pH7–8
Dithiothreitol0.1–1 mM
NaCl0–500 mM
EDTA0–10 mM
Detergents (Triton-x100; Tween-20; Nonidet P-40)0–1%
Temperature4–37 ℃

2. PreScission Protease Inhibitors

Protease activity can be inhibited by specific inhibitors. Please refer to the table below for cleavage reaction:

ReagentConcentrationInhibition Level
ZnCl₂100 mM> 50%
Pefabloc 7SC4 mM> 50%
Chymostatin100 μM> 50%
Antipain dihydrochloride74 μM< 20%
Aprotinin0.3 μM< 20%
Bestatin130 μM< 20%
E-6428 μM< 20%
Leupeptin1 μM< 20%
Pepstatin1 μM< 20%
Phosphoramidon0.6 mM< 20%
PMSF1 mM< 20%
ZnCl₂10 mM< 20%

规格

产品名称
PreScission蛋白酶 (PSP)
别名
PreScission 蛋白酶
规格或纯度
生物活性, 重组, EnzymoPure™, GST标签, ≥90%(SDS-PAGE), 大肠杆菌表达;1 U/μL, 1 mg/mL
生化机理
Major viral protease that mediates proteolytic processing of the polyprotein (By similarity). Cleaves host EIF5B, contributing to host translation shutoff. Cleaves also host PABPC1, contributing to host translation shutoff (By similarity). Cleaves host NLRP1, triggers host N-glycine-mediated degradation of the autoinhibitory NLRP1 N-terminal fragment.
生物活性
1 U/μL
表达系统
E. coli
种属
HRV-14
蛋白标签
N-GST
来源
重组表达
酶学委员会编号
EC 3.4.22.28
分子类型
酶
产品线
生物产品
储存与运输
物理形态
液体
浓度
大肠杆菌表达;1 U/μL, 1 mg/mL
储存条件
-20°C储存,避免反复冻融
运输条件
超低温运输
稳定性与储存
长期储存-20℃(12个月);收货后建议分装,避免反复冻融。
单位定义
在酶切缓冲液中切割 100 μg 被检测的融合蛋白,反应条件为 5 ℃,16 小时,切割率 ≥90%,定义为一个单位(1 U)

高级数据

质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:
溶液计算器

常见问题

本产品应如何储存?
请于?20 °C条件下保存。需冷冻保存以维持规定的有效期。
本产品如何运输?
本产品采用保温箱配冰袋运输。收货后请立即拆包,并按上述储存条件保存。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。