无蛋白快速封闭液 (1×)

货号: P751645
有货
级别和纯度: 适用于免疫荧光(IF) ? 适用于免疫荧光(IF)—— 经验证用于免疫荧光,背景染色低。用于通过荧光显微镜定位细胞/组织中的靶标。 BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 即用型 ? 即用型(ready-to-use)—— 以工作浓度预配供应,无需配制。用于节省时间并减少移液/稀释误差。 for western blot ? Western 印迹级 —— 适用于蛋白转印和免疫检测。适用于试剂纯度可保持低背景的 Western 流程。 适用于免疫组织化学(for IHC) ? 适用于免疫组化(IHC)—— 经验证用于组织切片免疫组化。用于在固定组织中检测和定位抗原。 1× in TBST
别名
无蛋白Western封闭液 | Western无蛋白封闭液 | 快速封闭液(即用型) | 无蛋白封闭缓冲液 | Western无蛋白封闭缓冲液 | 支原体去除试剂 | 支原体除菌试剂 | 抗支原体试剂
储存条件
2-8°C储存
运输条件
低温运输
应用
Immunofluorescence, Western Blot
★
规格
库存
价格
数量
100ml
P751645-100ml
现货 Stock Image
¥59.90
500ml
P751645-500ml
现货 Stock Image
¥129.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent,for western blot,即用型,适用于免疫组织化学(for IHC),适用于免疫荧光(IF) 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存。低温运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。

概述

本品专为快速高效封闭Western Blot转印膜而设计,采用无蛋白配方,避免抗体与封闭剂的非特异结合,最大程度地降低了背景。同时,本封闭剂无内源的磷酸化蛋白及生物素,对磷酸化特异抗体及生物素检测也不会产生干扰。本封闭剂不与蛋白产生非特异性结合,因而只封闭膜而不会屏蔽样品蛋白的抗体识别位点,大大提高了抗体检测灵敏度。实验表明,本封闭剂对许多抗体都有不同程度的信号增强作用。然而这种信号增强作用因抗体而异,对某一特定抗体,并不一定具有确定的信号增强作用。

注意:没有任何一种封闭剂能适合所有抗原和抗体的检测系统。如出现本试剂不适合的抗体,请替换使用其它种类的封闭剂,如BSA或脱脂奶粉等。

产品特点:

1. 快速高效:5~10 min 快速完成封闭;只结合封闭转印膜而不结合蛋白,因此不会屏蔽样品蛋白的抗体识别位点,与传统的脱脂奶粉和BSA封闭相比信噪比更高。

2. 方便快捷:无需稀释,即取即用。

3. 性能可靠:无蛋白配方,与抗体无交叉反应。

4. 应用范围广:无磷酸化蛋白,无生物素,尤其适合磷酸化特异抗体及生物素检测系统。

5. 节省抗体:使用本封闭液后,所需的最适抗体浓度低于常规使用浓度,可大大节省抗体使用量。

使用说明:

1. 完成转膜后,将转印膜放入到杂交孵育盒中,加入10~20 mL 无蛋白快速封闭液 ,置于摇床轻轻摇动,室温封闭约10 min(即配即用)。

注意:使用本品通常封闭5~15 min均可;经多种抗体的测试封闭10 min的效果显著优于常规的BSA封闭1h。对于一些背景非常高的抗体,可以尝试将封闭时间延长为30~60 min。如有特殊需要,也可4℃封闭过夜。

2. 封闭后的膜即可用于一抗孵育等后续实验。

注意事项:

1.本产品也可以用于免疫组化 (IHC) 和免疫荧光 (IF) 实验的封闭操作。

2. 为了您的安全和健康,请穿实验服并戴一次性手套操作。

3. 本产品仅限科研使用。

This product is specially formulated for rapid and efficient blocking of Western Blot transfer membranes. Its protein-free formula prevents non-specific binding between antibodies and blocking agents, minimizing background signals. Additionally, this blocking reagent contains no endogenous phosphorylated proteins or biotin, so it will not interfere with phosphorylated-specific antibody detection or biotin-based detection systems. It does not bind non-specifically to sample proteins, meaning it only blocks the membrane without masking antibody recognition sites on target proteins, significantly improving antibody detection sensitivity. Experiments confirm that this blocking reagent enhances signal intensity for many antibodies to varying degrees. However, this signal enhancement effect is antibody-specific and cannot be guaranteed for any single particular antibody.

Note: No single blocking reagent is compatible with all antigen and antibody detection systems. If this reagent yields unsatisfactory results with a specific antibody, switch to alternative blocking agents such as BSA or non-fat dry milk.

Product Features:

1. Rapid & High-efficiency: Complete blocking within 5–10 minutes. It binds only to the transfer membrane rather than sample proteins, so antibody recognition sites remain intact, delivering a higher signal-to-noise ratio compared with traditional blocking methods using non-fat dry milk or BSA.

2. Easy to Use: Ready-to-use, no dilution required.

3. Reliable Performance: Protein-free formulation with no cross-reactivity with antibodies.

4. Broad Compatibility: Free of phosphorylated proteins and biotin, ideal for phosphorylated-specific antibody assays and biotin detection systems.

5. Antibody Saving: Optimal working antibody concentrations are lower than standard protocols, greatly reducing antibody consumption.

Instructions for Use:

1. After membrane transfer, place the blot in a hybridization incubation box, add 10–20 mL of protein-free rapid blocking solution, and incubate on a gentle shaker at room temperature for approximately 10 minutes (use as prepared).

Note: A blocking duration of 5–15 minutes is generally acceptable. Validation across multiple antibodies shows that 10-minute blocking achieves superior results compared to 1-hour conventional BSA blocking. For antibodies with high background, extend blocking time to 30–60 minutes. Overnight blocking at 4°C is also acceptable if required.

2 .The blocked membrane is ready for primary antibody incubation and subsequent experimental procedures.

Precautions:

1. This product may also be used for blocking in Immunohistochemistry (IHC) and Immunofluorescence (IF) experiments.

2. Wear a lab coat and disposable gloves during handling for personal safety and health protection.

3. For research use only.

规格

别名
无蛋白Western封闭液 | Western无蛋白封闭液 | 快速封闭液(即用型) | 无蛋白封闭缓冲液 | Western无蛋白封闭缓冲液 | 支原体去除试剂 | 支原体除菌试剂 | 抗支原体试剂
英文别名
Protein free Western blocking solution | Protein free blocking buffer | MRA | Mycoplasma Elimination Reagent
规格或纯度
BioReagent, 即用型, for western blot, 适用于免疫荧光(IF), 适用于免疫组织化学(for IHC), 1× in TBST
稳定性与储存
Store at 2-8°C long term (12 months). Upon receipt, it is recommended to aliquot.
英文名称
Protein-Free Rapid Blocking Buffer (1×)
储存条件
2-8°C储存
运输条件
低温运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

产品属性
pH 7.4-7.6
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到4个结果

批号(Lot Number) 证书类型 货号
ZJ26F0838625 分析证书 P751645
ZJ26F0838624 分析证书 P751645
ZJ25F0117296 分析证书 P751645
ZJ25F0117295 分析证书 P751645
技术文档和文章
溶液计算器