SDS-PAGE蛋白上样缓冲液 (非还原,5X)

货号: S767014
有货
级别和纯度: BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 用于聚丙烯酰胺凝胶电泳 ? PAGE 级 —— 适用于聚丙烯酰胺凝胶电泳的纯度。适用于试剂纯度影响分辨率的蛋白/核酸 PAGE。 for western blot ? Western 印迹级 —— 适用于蛋白转印和免疫检测。适用于试剂纯度可保持低背景的 Western 流程。
别名
变性非还原蛋白上样缓冲液 | 变性非还原PAGE蛋白上样缓冲液( 5x)
储存条件
避光,-20°C储存,避免反复冻融
运输条件
超低温运输
应用
SDS-PAGE, WB
★
规格
库存
价格
数量
5ml
S767014-5ml
现货 Stock Image
¥139.90
5×5ml
S767014-5×5ml
现货 Stock Image
¥399.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent,for western blot,用于聚丙烯酰胺凝胶电泳 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

避光,-20°C储存,避免反复冻融。超低温运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 1 篇同行评审文献引用。

概述

SDS-PAGE蛋白上样缓冲液 (非还原,5X)是以溴酚蓝为染料,5倍浓缩的SDS-PAGE凝胶电泳上样缓冲液,具有沉淀蛋白样品进入凝胶孔和指示蛋白样品在凝胶中运动位置的作用同时缓冲液中不含有DTT/B-巯基乙醇等还原剂,不影响可使蛋白质分子的链内二硫键和链间二硫键。但是溶液中含有SDS类变性剂。适用于变性非还原型SDS-PAGE的蛋白样品制备和上样。
注意事项:
1. 加样前在室温或 37-40℃ 数分钟解冻后轻轻摇匀,以确保溶液混合均匀;
2. 本产品仅用于科研,不能用于人体实验或人体治疗;
3. 为了您的自身安全,使用试剂前,请做好防护,如穿实验服,带手套等。
使用说明:
1、试剂准备
1.1将蛋白示踪上样缓冲液(非还原,5x)与蛋白样品按照 1:4的比例混匀;
2、蛋白样品处理
2.1 将蛋白样品置于沸水浴中加热 3-5 分钟;
2.2 待蛋白样品充分变性后冷却至室温,以小于3000rpm 的条件离心 30 秒:
3、蛋白上样及电泳
3.1离心后,以微量进样器取适量上清,直接加入 SDS-PAGE 凝胶加样孔内;
3.2进行常规电泳,通常染料到达距离凝胶底端0.5cm-1cm 处即可停止电泳。

SDS-PAGE Sample Loading Buffer (Non-reduced, 5X) is a 5-fold concentrated SDS-PAGE gel electrophoresis sample loading buffer with bromophenol blue as the dye. It has the function of precipitating protein samples into the gel pores and indicating the movement position of protein samples in the gel. At the same time, the buffer does not contain reducing agents such as DTT/B-mercaptoethanol, which does not affect the disulfide bond in the chain and the disulfide bond between the chains of protein molecules. But the solution contains SDS type denaturing agents. Suitable for protein sample preparation and loading in denatured non reduced SDS-PAGE.
Precautions:
1. Before adding the sample, thaw it at room temperature or 37-40 ℃ for a few minutes and gently shake well to ensure even mixing of the solution;
2. This product is only used for scientific research and cannot be used for human experiments or treatments;
3. For your own safety, please take protective measures such as wearing lab coats and gloves before using the reagents.
Instructions for Use:
1. Reagent preparation
1.1 Mix the protein tracer loading buffer (non reducing, 5x) with the protein sample in a ratio of 1:4;
2. Protein sample processing
2.1 Heat the protein sample in a boiling water bath for 3-5 minutes;
2.2 After sufficient denaturation of the protein sample, cool it to room temperature and centrifuge at less than 3000rpm for 30 seconds:
3. Protein loading and electrophoresis
3.1 After centrifugation, take appropriate amount of supernatant with micro sampler and directly add it into the SDS-PAGE gel sampling hole;
3.2 Conduct routine electrophoresis. Generally, stop electrophoresis when the dye reaches 0.5cm-1cm from the bottom of gel.

规格

别名
变性非还原蛋白上样缓冲液 | 变性非还原PAGE蛋白上样缓冲液( 5x)
英文别名
enaturated PAGE protein loading buffer( Non reducing, 5X) | Denaturated PAGE protein loading buffer | Non-denatured Gel Sample Loading Buffer
规格或纯度
BioReagent, 用于聚丙烯酰胺凝胶电泳, for western blot
稳定性与储存
Store at -20°C long term (12 months). Upon receipt, it is recommended to aliquot. Avoid freeze/thaw cycle. Store in the dark.
英文名称
SDS-PAGE Sample Loading Buffer (Non-reduced, 5X)
储存条件
避光,-20°C储存,避免反复冻融
运输条件
超低温运输
产品线
生物产品
名称和识别符
分子类型
生物试剂/缓冲液

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

产品属性
pH 6.2-7.2
化学和物理性质
敏感性
Light sensitive
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到1个结果

批号(Lot Number) 证书类型 货号
ZJ25F0420291 分析证书 S767014
技术文档和文章
此产品的引用文献
溶液计算器