计算溶液所需的质量、体积或浓度。
BioReagent,for western blot,用于聚丙烯酰胺凝胶电泳 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
室温。常规运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
本产品为白色或淡黄色速溶颗粒,其主要成分为Tris、MOPS、EDTA和SDS,每袋速溶颗粒可配制500mL 1×Tris/MOPS/SDS电泳缓冲液,其中含有50mM Tris、50mM MOPS、1mM EDTA和0.1% SDS。
操作步骤
1、将大约300mL蒸馏水倒入烧杯,并向其中缓慢加入1袋Tris/MOPS/SDS电泳缓冲液速溶颗粒,搅拌溶液直至颗粒完全溶解;
2、向步骤1所得溶液中加入蒸馏水,定容至500mL,即为1×Tris/MOPS/SDS电泳缓冲液。
注意事项
1、为了您的安全和健康,请穿实验服并戴一次性手套操作;
2、本产品仅限科研使用。
This product is a white or light yellow instant granular powder, with main components including Tris, MOPS, EDTA and SDS. Each bag of instant granular powder can be used to prepare 500mL of 1×Tris/MOPS/SDS Electrophoresis Buffer, which contains 50mM Tris, 50mM MOPS, 1mM EDTA and 0.1% SDS.
Operating Procedures
Pour approximately 300mL of distilled water into a beaker, then slowly add one bag of Tris/MOPS/SDS Electrophoresis Buffer instant granular powder into it, and stir the solution until the granular powder is completely dissolved.
Add distilled water to the solution obtained in Step 1 and dilute to a final volume of 500mL; this is the 1×Tris/MOPS/SDS Electrophoresis Buffer.
Precautions
For your safety and health, please wear a lab coat and disposable gloves during operation.
This product is for scientific research use only.
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | T1492037 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 BioReagent 级别指南 → 查看 for PAGE 级别指南 → 查看 for Western blot 级别指南 →