计算溶液所需的质量、体积或浓度。
BioReagent,生物染色剂,用于核酸电泳 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
室温。常规运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
50×TAE 缓冲液,又称Tris‑乙酸电泳缓冲液(Tris‑Acetate‑EDTA Buffer),是分子生物学常用的 DNA 电泳缓冲液。1×TAE 工作液的标准组成为:40 mM Tris‑acetate、1 mM EDTA。
本产品为50 倍浓缩液,主要含 2 M Tris‑acetate、50 mM EDTA,使用时用蒸馏水或去离子水稀释 50 倍至 1×即可。
本试剂仅用于科研领域,不适用于临床诊断或其他用途。
操作步骤(仅供参考)
使用前用蒸馏水或去离子水稀释至 1× 工作液。
注意事项
1. 若单次用量较小,建议分装后使用。
2. 试剂若出现少量沉淀,通常不影响使用。
3. 操作时请穿戴实验服及一次性手套。
4. 试剂开封后请尽快使用,密封保存,以免影响实验效果。
50× TAE Buffer, also known as Tris-Acetate-EDTA Buffer, is a commonly used DNA electrophoresis buffer in molecular biology. The standard composition of 1× TAE working solution is: 40 mM Tris-acetate, 1 mM EDTA.
This product is a 50-fold concentrated solution, primarily containing 2 M Tris-acetate and 50 mM EDTA. For use, dilute 50-fold with distilled or deionized water to obtain a 1× working solution.
This reagent is for research use only. Not for use in diagnostic procedures or other purposes.
Procedure (For Reference Only)
Dilute the product to a 1× working solution with distilled or deionized water before use.
Notes
If the single-use volume is small, it is recommended to aliquot the reagent before use.
If a small amount of precipitate appears in the reagent, it usually does not affect usage.
Please wear laboratory appropriate attire and disposable gloves during operation.
Use the reagent as soon as possible after opening and keep it sealed to avoid affecting experimental results.
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | T665578 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 BioReagent 级别指南 → 查看 Biological Stain 级别指南 → 查看 for NA electrophoresis 级别指南 →