APES防脱剂

CAS: 919-30-2 货号: A1508985 分子式: C9H23NO3Si 分子量: 221.37 Beilstein号: 1754988 EC号: 213-048-4
有货
级别和纯度: 适用于免疫荧光(IF) ? 适用于免疫荧光(IF)—— 经验证用于免疫荧光,背景染色低。用于通过荧光显微镜定位细胞/组织中的靶标。 BioReagent ? 生物试剂级(BioReagent)—— 经测试适用于生命科学和分子生物学。适用于需要生物相容性的细胞培养、检测和生化工作。 用于显微镜 ? 显微镜级 —— 适用于样品制备和成像的试剂/染料。适用于需要清晰度和低背景的显微镜检查。 适用于免疫组织化学(for IHC) ? 适用于免疫组化(IHC)—— 经验证用于组织切片免疫组化。用于在固定组织中检测和定位抗原。
别名
3-氨基丙基三乙氧基硅烷 防脱剂 | 三乙氧基-3-氨基丙基硅烷 防脱剂 | 3-氨丙基三乙氧基硅烷 防脱剂 | APTES防脱剂 | APTS防脱剂 | 3-氨丙基-3-乙氧基硅烷 防脱剂
储存条件
2-8°C储存,避光
运输条件
低温运输
应用
IF/ICC, IHC, 细胞染色
★
规格
库存
价格
数量
10ml
A1508985-10ml
期货 Stock Image
¥99.90
50ml
A1508985-50ml
期货 Stock Image
¥299.90
请输入您要添加的产品数量
🧪
为什么选择此级别

BioReagent,用于显微镜,适用于免疫组织化学(for IHC),适用于免疫荧光(IF) 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。

🌡

储存与运输

2-8°C储存,避光。低温运输 。请查阅批次 COA 获取详细规格。

📋

质量文档

SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。

📚

文献证明

在色谱分析、有机合成和交叉偶联反应领域已被 3548 篇同行评审文献引用。

概述

  硅化载玻片是通过对玻璃表面起化学修饰作用改变其表面的化学物理特性, 使组织切片或细胞牢固的贴于玻璃片上,防止抗原修复过程中由于高温、高压的诸多因素所造成的脱片现象,玻片经过硅化处理后具有疏水性。

  3-氨丙基-3-乙氧基硅烷 (APES)是一种新型玻片粘附剂,通过对玻璃表面起化学修饰作用,改变其表面的化学物理特性,能够有效地防止各种操作过程中脱片现象的发生,用APES处理过的玻片可以广泛用于免疫组织化学、特殊染色、冰冻切片、细胞培养技术和原位杂交等领域。该试剂仅用于科研领域,不适用于临床诊断或其他用途。

操作步骤 (仅供参考):

1、配制APES玻片硅化试剂: 用丙酮、乙醇或其他溶剂与APES防脱剂按98: 2的比例混合即成。

2、洗涤:将玻片置于APES玻片硅化试剂中浸泡10s,然后用洗涤液 (丙酮、乙醇或其他溶剂)洗涤10s,最后于DEPC处理水中漂洗。

3、空气中干燥,4℃保存 (最好用铝箔包好,避免污染)。

注意事项:

1、APES防脱剂有轻微毒性,请小心操作,避免接触皮肤或吸入。

2、为了您的安全和健康,请穿实验服并戴一次性手套操作。

3、试剂开封后请尽快使用,以防影响后续实验效果。

  Silanized glass slides undergo chemical modification of the glass surface to alter its physicochemical properties, enabling tissue sections or cells to adhere firmly to the glass and prevent detachment caused by various factors such as high temperature and high pressure during antigen retrieval. Slides treated with silanization exhibit hydrophobicity.

  3-Aminopropyltriethoxysilane (APES) is a novel glass slide adhesive. It modifies the physicochemical properties of the glass surface through chemical treatment, which can effectively prevent tissue detachment during various experimental operations. Slides treated with APES can be widely used in immunohistochemistry, special staining, frozen sectioning, cell culture technology, in situ hybridization and other research fields. This reagent is for research use only (RUO) and not intended for clinical diagnosis or any other applications.

Operating Procedures (For Reference Only)

1. Prepare APES slide silanization reagent: Mix acetone, ethanol or other solvents with APES Adhesion Promoter at a volume ratio of 98:2.

2. Washing: Immerse the glass slides in the prepared APES slide silanization reagent for 10 seconds, then rinse with a washing solution (acetone, ethanol or other solvents) for 10 seconds, and finally rinse in DEPC-treated water.

3. Dry the slides in the air and store them at 4 ℃ (it is recommended to wrap them with aluminum foil to avoid contamination).

Precaution

1. APES Adhesion Promoter is slightly toxic; handle with care to avoid skin contact or inhalation.

2. For your safety and health, wear a lab coat and disposable gloves during operation.

3. Use the reagent as soon as possible after opening to prevent adverse effects on subsequent experimental results.

规格

别名
3-氨基丙基三乙氧基硅烷 防脱剂 | 三乙氧基-3-氨基丙基硅烷 防脱剂 | 3-氨丙基三乙氧基硅烷 防脱剂 | APTES防脱剂 | APTS防脱剂 | 3-氨丙基-3-乙氧基硅烷 防脱剂
英文别名
3-Aminopropyltriethoxysilane Adhesion Promoter | Triethoxy-3-aminopropylsilane Adhesion Promoter | APTES Adhesion Promoter | APTS Adhesion Promoter
规格或纯度
适用于免疫荧光(IF), BioReagent, 用于显微镜, 适用于免疫组织化学(for IHC)
稳定性与储存
Store at 2-8℃ long term (12 months). Store in the dark.
英文名称
APES Adhesion Promoter
储存条件
2-8°C储存,避光
运输条件
低温运输
产品线
生物产品
名称和识别符
EC号
213-048-4
分子类型
生物试剂/缓冲液
Isomeric SMILES
CCO[Si](CCCN)(OCC)OCC
UN Number
分子量
221.37
Beilstein号
1754988
Reaxy-Rn
1754988
Reaxys-RN link address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=1754988&ln=

技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

化学和物理性质
敏感性
Light-sensitive
折光率
1.42-1.422
闪点(℉)
199.4 °F
闪点(℃)
96 °C
沸点
217°C
熔点
-70°C
安全和危险性(GHS)
象形图
GHS05,   GHS07
信号词
Danger
危险声明

H314: 造成严重的皮肤灼伤和眼睛损伤

H302: 吞食有害

预防措施声明

P280: 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。

P321: 特殊处理(请参阅此标签上的...)。

P405: 密闭存放

P501: 将内容物/容器处理到。。。

P264: 处理后要彻底洗手。

P260: 不要吸入灰尘/烟雾/气体/雾/蒸汽/喷雾。

P270: 使用本产品时,请勿进食、饮水或吸烟。

P301+P330+P331: 如误吞咽:漱口。不要诱导呕吐。

P304+P340: 如误吸入:将人转移到空气新鲜处,保持呼吸舒适体位。

P363: 再次使用之前,请清洗受污染的衣物。

P330: 漱口

P301+P317: 如果被吞咽:请寻求医疗帮助。

P305+P354+P338: 如果进入眼睛:立即用水冲洗几分钟。取下隐形眼镜(如果有的话),并且操作简单。继续冲洗。

P302+P361+P354: 如果接触皮肤:立即脱掉所有被污染的衣服。立即用水冲洗几分钟。

P316: 立即寻求紧急医疗救助。

WGK Germany
1
RTECS
TX2100000
个人防护装备
Faceshields,full-face respirator (US),Gloves,Goggles,multi-purpose combination respirator cartridge (US),type ABEK (EN14387) respirator filter
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到2个结果

批号(Lot Number) 证书类型 货号
ZJ26F0737185 分析证书 A1508985
ZJ26F0434185 分析证书 A1508985
技术文档和文章
脲基硅烷的结构特征、界面反应与应用选型逻辑
Structural Features, Interfacial Reactions, and Application Selection Logic of Ureido Silanes
烷基硅烷:结构特点、表面反应、应用与产品选型
Alkylsilanes: Structural Features, Surface Reactions, Applications, and Product Selection
氨基硅烷:结构特点、分类、作用机制及典型应用
Aminosilanes: Structural Features, Classification, Mechanisms of Action, and Typical Applications
钛酸酯偶联剂:结构特点、分类、典型应用及与硅烷偶联剂的区别
Titanate Coupling Agents: Structural Features, Classification, Typical Applications, and Differences from Silane Coupling Agents
环氧基硅烷偶联剂:结构特点、分类、典型应用与使用注意事项
Epoxy Silane Coupling Agents: Structural Features, Classification, Typical Applications, and Precautions for Use
硅烷偶联剂底涂液的配制方法与注意事项
Preparation Methods and Precautions for Silane Coupling Agent Primer Solutions
硅烷偶联剂适用于哪些填料和底材:表面羟基、界面键合与实验验证
Which Fillers and Substrates Are Suitable for Silane Coupling Agents: Surface Hydroxyls, Interfacial Bonding, and Experimental Verification
硅溶胶是什么:纳米二氧化硅分散液的作用机理、应用场景与选型要点
What Is Silica Sol: Mechanism of Action, Application Scenarios, and Selection Criteria for Nanosilica Dispersions
环氧树脂的四类核心应用:连接、防护、承载与绝缘保护
Four Core Applications of Epoxy Resins: Bonding, Protection, Load-Bearing, and Insulation Protection
环氧树脂性能设计指南:体系组成、关键性能、工艺控制与应用选型
Guide to Epoxy Resin Performance Design: System Composition, Key Properties, Process Control, and Application Selection
聚氨酯涂料体系选型指南:木器、地坪、塑胶、汽车与工业防护应用解析
Guide to Selecting Polyurethane Coating Systems: Application Analysis for Wood, Flooring, Plastics, Automotive, and Industrial Protection
氟碳树脂涂料配方设计:树脂选型、配套体系与应用控制要点
Fluorocarbon Resin Coating Formulation Design: Resin Selection, Supporting Systems, and Key Application Control Points
从结构看硅树脂:硅氧烷骨架、M/D/T/Q 单元与涂料性能调节
Understanding Silicone Resins from Their Structure: Siloxane Backbones, M/D/T/Q Units, and Coating Performance Regulation
硅树脂涂料配方设计:从应用工况到树脂、颜填料、固化与底材匹配
Silicone Resin Coating Formulation Design: From Application Conditions to Matching Resins, Pigments and Fillers, Curing, and Substrates
从天然纤维素到纳米晶体:CNC 的结构特性、应用方向与产业化挑战
From Natural Cellulose to Nanocrystals: Structural Characteristics, Application Directions, and Industrialization Challenges of CNC
蒙脱土如何合理改性?有机改性、无机改性与应用选型验证思路
How Should Montmorillonite Be Rationally Modified? Organic Modification, Inorganic Modification, and Application-Oriented Selection and Validation
常见水性树脂类型与应用选型指南:丙烯酸、PUD、水性环氧、水性醇酸、VAE 及相关化学品如何选择
Guide to Common Waterborne Resin Types and Application-Based Selection: How to Choose Acrylics, PUD, Waterborne Epoxy, Waterborne Alkyd, VAE, and Related Chemicals
涂料性能问题诊断与树脂改性路线选择
Diagnosis of Coating Performance Issues and Selection of Resin Modification Routes
常见树脂改性技术的结构设计逻辑:分子链结构、官能团、相结构、交联网络与杂化/功能化设计
Structural Design Logic of Common Resin Modification Technologies: Molecular Chain Structure, Functional Groups, Phase Structure, Crosslinked Networks, and Hybrid/Functional Design
涂料咬底的机理、诊断与控制:溶剂渗透、涂膜溶胀与层间失稳
Mechanism, Diagnosis, and Control of Coating Lifting: Solvent Penetration, Film Swelling, and Interlayer Instability
涂料配方中的树脂极性:从分子结构到溶解、相容、界面作用与配方设计
Resin Polarity in Coating Formulations: From Molecular Structure to Dissolution, Compatibility, Interfacial Interactions, and Formulation Design
什么是多胺?结构特点、分类与代表物、应用及合成策略
What Are Polyamines? Structural Features, Classification and Representative Compounds, Applications, and Synthetic Strategies
石墨烯生物传感器的信号转换机制:从分子识别到电学/光学信号读出与材料选型
Signal Transduction Mechanism of Graphene Biosensors: From Molecular Recognition to Electrical/Optical Signal Readout and Materials Selection
聚乙烯醇1788、2488、2699有什么区别?从聚合度和醇解度看施工性、粘结强度与相对耐水性
What Are the Differences Between Polyvinyl Alcohol 1788, 2488, and 2699? Understanding Workability, Bonding Strength, and Relative Water Resistance from the Perspective of Degree of Polymerization and Degree of Hydrolysis
醛亚胺潜固化剂在单组分湿固化聚氨酯中的应用——CO₂ 气泡控制机理与配方设计要点
Application of Aldimine Latent Curing Agents in One-Component Moisture-Curing Polyurethane Systems —— Mechanism of CO₂ Bubble Control and Key Formulation Design Points
APES 粘附促进剂:组织切片粘附指南
APES Adhesion Promoter: Tissue Section Adhesion Guide
此产品的引用文献
溶液计算器

常见问题

什么是「适用于免疫荧光(IF)」?
「适用于免疫荧光(IF)」表示产品已针对ELISA、IF、IHC 和流式细胞术等免疫检测进行验证。验证可能包括阳性/阴性对照样品、信噪比测试以及方案特定的 QC。在可用情况下,批次特定的检测数据会发布在分析证书上。
什么是「BioReagent」?
「BioReagent」表示该产品经过加工和检测,适用于生物和生化应用。规格可能包括内毒素限值、微生物控制、无菌性、低 DNase/RNase/蛋白酶活性,以及在相关情况下的生物活性验证。
本产品应如何储存?
请于2–8 °C、避光条件下保存。本品对光敏感,请保存在原始的避光或棕色容器中。
本产品如何运输?
本产品采用湿冰冷藏运输。收货后请立即拆包,并按上述储存条件保存。
本产品的 CAS 号、分子式和分子量是多少?
本产品的 CAS 号为 919-30-2。
如何获取批次专用COA?
每个订单都会随附分析证书(COA),您也可以从账户订单历史中下载。如需订购前的COA,请联系您的客户代表,或使用PDP上的"申请COA"按钮——我们将提供代表性批次的COA。

需要帮助选择级别?

我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。

查看 Suitable for Immunofluorescence(IF) 级别指南 → 查看 BioReagent 级别指南 → 查看 for Microscopy 级别指南 → 查看 Suitable for Immunohistochemistry(IHC) 级别指南 →