计算溶液所需的质量、体积或浓度。
BioReagent,生物染色剂,用于显微镜 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
避光,室温。常规运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 99 篇同行评审文献引用。
伊红 (Eosin)又称曙红,属人工合成染料中的呫吨类染料,为桃红色或粉红色的粉末,伊红 (醇溶)分子式为C₂₀H₈Br₄O₅,分子量为647.9,伊红最适宜与苏木精配合染色以显示正常或病理组织的形态结构。
伊红染色液 (醇溶, 0.5%)采用特有防腐剂,操作简单,不使用汞、甲醇等有毒试剂,常用于组织切片或培养细胞的染色,染色后细胞浆呈粉红色或红色。该试剂仅用于科研领域,不适用于临床诊断或其他用途。
自备材料:
系列乙醇、4%多聚甲醛、二甲苯或环保浸蜡脱蜡透明液
操作步骤(仅供参考):
1、样品处理
a) 对于石蜡切片:
① 二甲苯或脱蜡液 (D292661)中脱蜡5-15min。
②更换新鲜的二甲苯或脱蜡液 (D292661),再脱蜡5-15min。
③无水乙醇5min。
④90%乙醇2min。
⑤70%乙醇2min。
⑥蒸馏水2min。
b) 对于冰冻切片:
蒸馏水2min。
c) 对于培养细胞:
① 用4%多聚甲醛固定10min以上。
② 蒸馏水洗涤2分钟。
③ 更换新鲜的蒸馏水,再洗涤2min。
2、伊红染色:对于上述处理好的样品,伊红染色液染色0.5-5min (根据染色结果和要求调整时间),如果需要直接观察,可以用70%乙醇洗涤2次;如需脱水、透明后封片按后续步骤进行,70%乙醇洗涤后仍可按照后续步骤进行脱水、透明和封片处理。
注:如果用于免疫组化等染色后的复染,参考上述步骤在其它染色完成后进行伊红染色。
3、脱水、透明、封片或进行其它染色
a) 脱水、透明、封片:
① 95%乙醇脱水2min。
② 更换新鲜的95%乙醇再脱水2min。
③ 无水乙醇脱水2min。
④ 更换新鲜的无水乙醇再脱水2min。
⑤ 二甲苯或脱蜡液 (D292661)透明5min。
⑥ 更换新鲜的二甲苯或脱蜡液 (D292661),再透明5min。
⑦ 用中性树胶或其它封片剂封片。
⑧ 显微镜下观察,细胞浆呈粉红色或红色。
b) 进行其它染色:
① 如果进行免疫荧光染色或进行Hoechst等荧光染料的染色,在伊红染色液染色后:70%乙醇洗涤2次,每次2min。
② PBS或生理盐水或TBS或TBST等用于免疫染色或荧光染料染色的溶液浸泡5min。
③ 进行免疫荧光染色或其它荧光染料的染色。
注意事项:
1、 如果需要脱水、透明和封片处理,需自备二甲苯或脱蜡液 (D292661),中性树胶或其它封片剂。
2、 为了您的安全和健康,请穿实验服并戴一次性手套操作。
3、 试剂开封后请尽快使用,以防影响后续实验效果。
Eosin, also known as tetrabromofluorescein, is a type of xanthene dye among synthetic dyes. It appears as a peach-red or pink powder. The molecular formula of eosin (alcohol-soluble) is C₂₀H₈Br₄O₅, with a molecular weight of 647.9. Eosin is most suitable for being used in combination with hematoxylin for staining to display the morphological structure of normal or pathological tissues.
The Eosin Staining Solution (alcohol-soluble, 0.5%) adopts a unique preservative, featuring simple operation and no use of toxic reagents such as mercury and methanol. It is often used for staining tissue sections or cultured cells, and after staining, the cytoplasm shows pink or red color. This reagent is for research use only and not intended for clinical diagnosis or other purposes.
Materials to Be Prepared by Users
A series of ethanol solutions;4% paraformaldehyde;Xylene or environment-friendly wax-immersing, dewaxing and clearing solution
Operating Steps (for Reference Only)
1. Sample Processing
a) For Paraffin Sections:
① Dewax in xylene or dewaxing solution (Cat. No.: D292661) for 5-15 minutes.
② Replace with fresh xylene or dewaxing solution (Cat. No.: D292661) and dewax again for 5-15 minutes.
③ Immerse in absolute ethanol for 5 minutes.
④ Immerse in 90% ethanol for 2 minutes.
⑤ Immerse in 70% ethanol for 2 minutes.
⑥ Immerse in distilled water for 2 minutes.
b) For Frozen Sections:
Immerse in distilled water for 2 minutes.
c) For Cultured Cells:
① Fix with 4% paraformaldehyde for more than 10 minutes.
② Rinse with distilled water for 2 minutes.
③ Replace with fresh distilled water and rinse again for 2 minutes.
2. Eosin Staining
For the samples processed as above, stain with the Eosin Staining Solution for 0.5-5 minutes (adjust the time according to staining results and requirements).
If direct observation is needed, rinse with 70% ethanol twice.
If dehydration, clearing and mounting are required, proceed with the subsequent steps. After rinsing with 70% ethanol, dehydration, clearing and mounting can still be carried out in accordance with the subsequent steps.
Note: If used for counterstaining after staining such as immunohistochemistry, refer to the above steps to perform eosin staining after other staining procedures are completed.
3. Dehydration, Clearing, Mounting or Other Staining Procedures
a) Dehydration, Clearing and Mounting:
① Dehydrate in 95% ethanol for 2 minutes.
② Replace with fresh 95% ethanol and dehydrate again for 2 minutes.
③ Dehydrate in absolute ethanol for 2 minutes.
④ Replace with fresh absolute ethanol and dehydrate again for 2 minutes.
⑤ Clear in xylene or dewaxing solution (Cat. No.: D292661) for 5 minutes.
⑥ Replace with fresh xylene or dewaxing solution (Cat. No.: D292661) and clear again for 5 minutes.
⑦ Mount the section with neutral balsam or other mounting media.
⑧ Observe under a microscope; the cytoplasm should appear pink or red.
b) Other Staining Procedures:
① If immunofluorescence staining or staining with fluorescent dyes such as Hoechst is to be performed, after staining with the Eosin Staining Solution: rinse with 70% ethanol twice, 2 minutes each time.
② Immerse in a solution suitable for immunostaining or fluorescent dye staining (such as PBS, normal saline, TBS or TBST) for 5 minutes.
③ Perform immunofluorescence staining or staining with other fluorescent dyes.
Precautions
1. If dehydration, clearing and mounting are required, users need to prepare xylene or dewaxing solution (Cat. No.: D292661), neutral balsam or other mounting media by themselves.
2. For your safety and health, please wear a lab coat and disposable gloves during operation.
3. Please use the reagent as soon as possible after opening to avoid affecting the subsequent experimental results.
H302: 吞食有害
P501: 将内容物/容器处理到。。。
P264: 处理后要彻底洗手。
P270: 使用本产品时,请勿进食、饮水或吸烟。
P330: 漱口
P301+P317: 如果被吞咽:请寻求医疗帮助。
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | E1507828 | |
| 分析证书 | E1507828 | |
| 分析证书 | E1507828 | |
| 分析证书 | E1507828 | |
| 分析证书 | E1507828 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 BioReagent 级别指南 → 查看 Biological Stain 级别指南 → 查看 for Microscopy 级别指南 →