计算溶液所需的质量、体积或浓度。
成纤维细胞生长因子受体3(FGFR3)是一种蛋白质,它也被命名为CD333(分化簇333)。该基因位于4号染色体上,位置为p16.3,在软骨、大脑、肠道和肾脏等组织中表达。FGFR3基因产生各种形式的FGFR3蛋白;位置根据FGFR3蛋白的异构体而变化。由于不同的形式存在于不同的组织内,该蛋白负责多种生长因子的相互作用。它的功能增益突变会抑制软骨细胞的增殖,是软骨发育不良和软骨发育不全的基础。 本试剂盒采用双抗体夹心法酶联免疫吸附试验(ELISA)。往预先包被有人成纤维细胞生长因子受体3(FGFR3)捕获抗体的微孔中,依次加入样本、标准品、生物素标记的检测抗体,HRP酶结合物,中间经过温育和洗涤,用底物TMB显色,TMB在过氧化物酶(HRP)的催化下转化成蓝色,并在酸的作用下转化成最终的黄色。颜色的深浅和样本中的人成纤维细胞生长因子受体3(FGFR3)呈正相关。用酶标仪在450nm 波长下测定吸光度(OD值),计算样本浓度。
This kit employs the sandwich enzyme-linked immunosorbent assay (ELISA) principle. Microplate wells are pre-coated with a capture antibody specific to Human FGFR3. Following this, the sample, standards, a biotin-conjugated detection antibody, and an HRP (horseradish peroxidase)-labeled conjugate are added sequentially to the wells. The procedure involves incubation and wash steps between each addition. For detection, TMB substrate is used. TMB yields a blue color in the presence of the peroxidase activity of HRP. The reaction is then stopped with an acid solution, which converts the blue color to a final yellow color. The intensity of the yellow color is directly proportional to the concentration of Human FGFR3 present in the sample. The optical density (OD) is measured at a wavelength of 450 nm using a microplate reader. Finally, the concentration of the target analyte in the sample is calculated based on the standard curve generated from the standards.