Batteries-Basel
·
2025
·Vol. 11
·期 3
·83
·
IF 4.8
Yongli Tong,Baoqian Chi,Yu Jiang,Xiang Wu
It is crucial for energy storage devices to construct electrode materials with excellent performance. However, enhancing energy density and cycling stability for supercapacitors is a significant challenge. We successfully synthesized CoNi2S4@Ni(OH)2nanosheets on the surface of Ni foam substrate by a two-step hydrothermal approach. The obtained products exhibit a remarkable areal capacitance of 1534 F g−1at a current density of 1 A g−1. Moreover, even after 10,000 cycles, the specific capacitance remains 90% of its initial value, highlighting the exceptional long-term stability and durability. Furthermore, an asymmetric supercapacitor (ASC) device incorporating the CoNi2S4@Ni(OH)2material shows remarkable electrochemical performance. It delivers an energy density of 58.5 mW h g−1at a power density of 2700 W kg−1. The outstanding performance mainly arises from the selection of materials, the design of the structure, and the synergistic interaction between the materials. The result suggests that this material holds great potential as an energy storage material.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS SCIENCE FORUM
·
2017
·
IF 0
Zhao Bing Cai,Xue Jia Pang,Xiu Fang Cui,Xin Wen,Zhe Liu,Mei Ling Dong,Yang Li,Guo Jin
In order to improve the surface properties of Ti-6Al-4V, high-entropy alloy coatings were prepared by in-situ laser cladding on the surface of Ti-6Al-4V substrate. The microstructure, micro-hardness, corrosion resistance and wear resistance were investigated. The results showed that the high-entropy alloy coating was composed of BCC high-entropy alloy phase, α-Ti phase and (Ni, Co)Ti2 phase. The micro-hardness of the high-entropy alloy coatings is much higher than that of Ti-6Al-4V substrate. The coating also has a better corrosion resistance than Ti-6Al-4V substrate, even superior to 304SS in 3.5wt.% NaCl solution at room temperature. Compared with Ti-6Al-4V substrate, the high-entropy alloy coating has a greater wear resistance with the wear mass loss decreased 28.2% and 23.1%, respectively. Wear patterns of Ti-6Al-4V substrate and high-entropy alloy coatings are the coexistence of adhesive wear and abrasive wear, but the wear degree of high-entropy alloy coatings is lower.
✓ 已验证
产品关联
DOI
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
·
2016
·
IF 1.34
Shan-guang SONG,Shi-lei TAN,Xiao-xiao QI,Wei WANG,Li-li WANG
YSZ/(Ni, Al) composite coatings were deposited on Inconel600 superalloy with ball peening (BP) and without (non BP) treatment using the electrophoretic deposition (EPD) technique, followed by vacuum sintering method. The structures and phase evolution of the coatings were studied with X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The relation between microstructures and properties of the BPs-coated samples was discussed. The results show that the adhesion strength and gain mass of the BPs-coated samples with isothermal oxidation at 1100 °C for 100 h are 3.3 N and 0.00817 mg/cm 2 , respectively, while those of the non-BPs-coated sample are 2.6 N and 0.00559 mg/cm 2 , respectively. The EDS mapping analysis indicates that an obvious outward diffusion of Cr from the substrate to BPs coated samples occurs after isothermal oxidation. The BPs-coated sample shows the superior adhesion and oxidation resistance compared with non-BPs-coated samples.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2016
·Vol. 52
·期 6
·3535-3544
·
IF 2.302
Gao Xiufeng,Chen Shaoping,Dong Feng,Hu Lifang,Yang Renyao,Wang Wenxian,Munir Zuhair A.
The diffusion bonding between Ti and Ni was investigated in the presence and absence of an imposed electric current. Bonding was carried out over the temperature range of 873–1123 K and the current density range of 255–350 A/cm 2 . The formation and sequence of evolution of the three intermetallic phases, TiNi 3 , TiNi, and Ti 2 Ni, were investigated and discussed in light of calculations of Gibbs free energies of formation and interfacial energies associated with their nucleation. Within the experimental times and in the presence of a current, the growth of the three phases was parabolic. The evolution of the TiNi phase required an incubation period, while the relatively high growth rate of TiNi 3 suggests the possibility of another mechanism. The growth of all phases was enhanced by the application of a direct current, with no apparent dependence on its direction.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2016
·
IF 2.435
Tara Larsson,Ting Shuai Li,Min Xu,Ida Fransson,Guangsen Yu,Martin Andersson,Baihai Li,Bengt Sunden
In this study, we co-fabricated the Ni-based nanofibers using an electrospinning technique. The effects of viscosity, applied voltage and distance from needle to the collection plate on the fiber morphology were investigated. The fibers were sintered at temperatures ranging from 350 °C to 1200 °C and the results indicated that the crystallization was completed at 800 °C and the particle size increased with the temperature. The porosity of nanostructure can reach over 50% before reduction of the nickel oxide, which increased firstly with the temperature and then decreased over 800 °C. The nanocrystallization of an anode was helpful to maximize the electrochemical reaction sites for restraining the activation polarization and also to enlarge pores for rapid gas diffusion in fuel cells.
✓ 已验证
产品关联
DOI
高影响因子
TETRAHEDRON
·
2016
·
IF 2.645
Dong-Qing Zheng,Yu Jing,Bing-Ying Zheng,Yun-Fei Ye,Sheng Xu,Wei-Sheng Tian,Hai-Yan Ma,Kai Ding
The conventional etherification uses toxic or hardly degradable alkylating agents . An eco-friendly tandem etherification/aromatization is presented to prepare estrone 3-secondary ethers from easily available dienone 1 . Three marketed 3-etherified estrogen drugs were synthesized with the method from commercial available starting material.
✓ 已验证
产品关联
DOI
高影响因子
Theranostics
·
2017
·
IF 8.766
Xiaoyu Wang,Wen Cao,Li Qin,Tingsheng Lin,Wei Chen,Shichao Lin,Jia Yao,Xiaozhi Zhao,Min Zhou,Cheng Hang,Hui Wei
Catalytic nanomaterials with intrinsic enzyme-like activities, called nanozymes, have recently attracted significant research interest due to their unique advantages relative to natural enzymes and conventional artificial enzymes. Among the nanozymes developed, particular interests have been devoted to nanozymes with peroxidase mimicking activities because of their promising applications in biosensing, bioimaging, biomedicine, etc. Till now, lots of functional nanomaterials have been used to mimic peroxidase. However, few studies have focused on the Ni-based nanomaterials for peroxidase mimics. In this work, we obtained the porous LaNiO 3 nanocubes with high peroxidase-like activity by inducing its 3+ oxidation state in LaNiO 3 perovskite and optimizing the morphology of LaNiO 3 perovskite. The peroxidase mimicking activity of the porous LaNiO 3 nanocubes with Ni 3+ was about 58~fold and 22~fold higher than that of NiO with Ni 2+ and Ni nanoparticles with Ni 0 . More, the porous LaNiO 3 nanocubes exhibited about 2-fold higher activity when compared with LaNiO 3 nanoparticles. Based on the superior peroxidase-like activity of porous LaNiO 3 nanocubes, facile colorimetric assays for H 2 O 2 , glucose, and sarcosine detection were developed. Our present work not only demonstrates a useful strategy for modulating nanozymes' activities but also provides promising bioassays for clinical diagnostics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TETRAHEDRON
·
2017
·
IF 2.651
Cuiling Wang,Jiaxu Yan,Mo Du,Joseph A. Burlison,Chi Li,Yanni Sun,Danqing Zhao,Jianli Liu
One step synthesis of the natural product indirubin by reductive coupling of isatin with KBH 4 is described and a possible mechanism for the reaction is proposed. Eleven indirubin derivatives were obtained easily from the corresponding substituted isatin.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2016
·
IF 7.145
Yunfeng Qiu,Jingjing Liu,Yue Lu,Rui Zhang,Wenwu Cao,PingAn Hu
Backing materials play important role in enhancing the acoustic performance of an ultrasonic transducer. Most backing materials prepared by conventional methods failed to show both high acoustic impedance and attenuation, which however determine the bandwidth and axial resolution of acoustic transducer, respectively. In the present work, taking advantage of the structural feature of 3D graphene foam as a confined space for dense packing of tungsten spheres with the assistance of centrifugal force, the desired structural requirement for high impedance is obtained. Meanwhile, superior thermal conductivity of graphene contributes to the acoustic attenuation via the conversion of acoustic waves to thermal energy. The tight contact between tungstate spheres, epoxy matrix, or graphene makes the acoustic wave depleted easily for the absence of air barrier. The as-prepared 3DG/W80 wt %/epoxy film in 1 mm, prepared using ∼41 μm W spheres in diameter, not only displays acoustic impedance of 13.05 ± 0.11 MRayl but also illustrates acoustic attenuation of 110.15 ± 1.23 dB/cm MHz. Additionally, the composite film exhibits a high acoustic absorption coefficient, which is 94.4% at 1 MHz and 100% at 3 MHz, respectively. Present composite film outperforms most of the reported backing materials consisting of metal fillers/polymer blending in terms of the acoustic impedance and attenuation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2017
·
IF 7.504
Jing Wang,Shanjun Mao,Zeyan Liu,Zhongzhe Wei,Haiyan Wang,Yiqing Chen,Yong Wang
The research of a robust catalytic system based on single NiOx electrocatalyst for hydrogen evolution reaction (HER) remains a huge challenge. Particularly, the factors that dominate the catalytic properties of NiOx-based hybrids for HER have not been clearly demonstrated. Herein, a convenient protocol for the fabrication of NiOx@bamboo-like carbon nanotube hybrids (NiOx@BCNTs) is designed. The hybrids exhibit superb catalytic ability and considerable durability in alkaline solution. A benchmark HER current density of 10 mA cm–2 has been achieved at an overpotential of ∼79 mV. In combination with the experimental results and density functional theory (DFT) calculations, this for the first time definitely validates that the inherent high Ni0 ratio and the Ni0 on the interface of Ni/NiO play a vital role in the outstanding catalytic performance. Especially, the Ni0 on the interface of Ni/NiO performs superior activity for water splitting compared with that of bulk Ni0. These conclusions provide guidance for the rational design of the future non-noble metallic catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2016
·
IF 2.687
Xiao-Mei He,Bi-Feng Yuan,Yu-Qi Feng
Immobilized metal affinity chromatography (IMAC) technique is frequently used in the purification of histidine-tagged (His-tagged) recombinant proteins. In this study, nickel(II)-immobilized carboxyl cotton chelator (CCC-Ni 2+ ) fibers was synthesized by a simple method based on the coordination effect between Ni 2+ and carboxyl group. The nickel content of the CCC-Ni 2+ fibers was determined to be 5 times larger than that of Ni 2+ -immobilized sulfhydryl cotton fiber (SCF-Ni 2+ ) fibers developed in our previous work. The prepared CCC-Ni 2+ fibers were then applied for the selective and rapid separation of His-tagged protein from escherichia coli ( E. coli ) cell lysates on the basis of the high affinity of Ni 2+ to 6 × His with a lab-in-syringe format. Benefiting from the good biological compatibility and high nickel content, the results showed that CCC-Ni 2+ fibers were able to selectively capture His-tagged proteins from complex E. coli cell lysates and exhibited a relatively large adsorption capacity toward His-tagged protein. The recoveries of His-tagged GFP in E. coli cell lysates were in the range of 89.8%-106.7% with the relative standard deviations (RSDs) less than 9.4% (intra-day) and 10.3% (inter-day). Taken together, this efficient approach for the purification of recombinant proteins extends the application of CCC-based fibrous materials in biological analysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 19
·15354-15361
·
IF 3.289
Xinhuan Lu,Yang chen,Zhenshuang Zhao,Hao Deng,Dan Zhou,Changcheng Wei,Renfeng Nie,Qinghua Xia
The carbon supported 10% Ni catalysts doped with 3‰ Rh have been prepared by an impregnation method. These catalysts have been used to catalyze the one-step hydrogenation of nitrobenzene to cyclohexylamine. The results show that the 3‰ Rh–10% Ni/CSC (biocarbon) catalyst exhibits an excellent performance to achieve 100 mol% conversion of nitrobenzene and 91.6% selectivity of cyclohexylamine under reaction conditions of 3.5 MPa and 140 °C. The recycling tests reveal recyclable stability of 3‰ Rh–10% Ni/CSC. This catalyst is active for the hydrogenation of a series of electron-deficient nitrobenzenes. Some factors such as the type of carriers, the content of Ni and Rh, the type of metals and additives play important roles in controlling the selective hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）