FOOD CHEMISTRY
·
2026
·
IF 10.4
Xinya Huang,Meiyu Zheng,Jin Zhang,Jinglun Zhou,Qingyang Zhang,Zhengting Zhu,Ping Kong,Shu Wang,Bin Li,Zhigang Hu,Kangyu Zhao,Dongping He,Fenfen Lei,Li Zhou
The Antarctic krill oil purification efficiency was improved by optimized refining. • 97.51% of phospholipids were removed by enzymatic degumming. • 99.72% decolorization was achieved by magnesium silicate. • The lipid class distribution in Antarctic krill oil was altered by refining. • Off-flavor compounds in Antarctic krill oil were reduced by refining. This study evaluated an optimized refining process (enzymatic degumming, alkali deacidification, adsorption bleaching) on Antarctic krill oil (AKO) quality. Enzymatic degumming achieved 97.51% phospholipid removal while preserving polyunsaturated fatty acids. Alkali deacidification reduced free fatty acids, enhancing stability. Adsorption bleaching with magnesium silicate exhibited 99.72% decolorization efficiency and superior oxidative stability over activated clay. Lipid composition analysis revealed lipid remodeling, marked by decreased glycerophospholipids and increased glycerides. Among 47 identified volatiles, key flavor-contributing aldehydes like (E,Z)-2,6-nonadienal and (E,E)-2,4-heptadienal correlated strongly negatively with specific polyunsaturated triacylglycerols (r up to −0.99999) but positively with phospholipids ( r ≥ 0.84072), indicating distinct roles in flavor evolution. Electronic nose analysis confirmed that refining, especially enzymatic degumming, significantly reduced off-flavor compounds. Overall, the optimized strategy enhanced AKO quality by efficiently removing impurities, preserving lipid integrity, and suppressing off-flavor formation. Download: Download high-res image (205KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子
TETRAHEDRON
·
2026
·
IF 2.1
Jiahui Ma,Yiming Ma,Huida Qian,Yu Wang,Zhongxue Fang
A silver-catalyzed [3 + 2] cycloaddition of imines with isocyanoacetates was developed. This reaction represents a novel protocol for the efficient and practical synthesis of polysubstituted imidazolines bearing a broad range of substituents with good to excellent yields under mild conditions. The practicality of this cycloaddition was shown by a gram-scale synthesis.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yongkun Wang,Feng Li,Yuting Di,Mengru Yao,Deyin Hou
Predictive framework enables site-specific membrane selection for DBP control • SHAP analysis reveals species-specific pathways converge on precursor passage • Machine learning links membrane properties to DBP formation outcomes • Integrated framework balances rejection performance against energy consumption Controlling disinfection by-product (DBP) formation during drinking water treatment relies on effective removal of their precursors, particularly the low-molecular-weight natural organic matter (LMW-NOM) fraction that conventional processes struggle to remove. Although nanofiltration (NF) membranes can solve this problem effectively, selecting the appropriate membrane involves trade-offs between precursor rejection and energy consumption which depends on multiple factors. Here we report systematic evaluation of four commercial NF membranes with molecular weight cut-offs from 200 to 550 Da using representative NOM compounds spanning 133–620 Da. Cross-flow nanofiltration experiments were combined with chlorination tests at multiple disinfectant doses, and the resulting dataset was augmented with literature data to train XGBoost machine learning models with SHAP interpretability analysis. Size exclusion dominated rejection behavior, with the tightest NF90 membrane achieving >96% TOC removal and > 98% UV254 reduction and correspondingly lowest DBP yields upon chlorination (TCM reduced by 85–92%, DCAA by 78–88%, TCAA by 82–90% compared to unfiltered water). Machine learning models coupled with SHAP analysis revealed that each DBP species responds to different controlling factors, with dichloroacetic acid governed by reaction time, trichloroacetic acid by chlorine dose, and trichloromethane by temperature, yet all pathways ultimately depend on precursor penetrated through the membrane. Integration of these findings into a quantitative selection framework balancing rejection against energy consumption identifies membranes based on characteristics of source waters, providing specific MWCO recommendations with associated energy costs for fourteen representative NOM distribution scenarios. This predictive approach provides a practical, semi-quantitative tool for membrane selection in drinking water treatment plants that minimizes DBP formation while maintaining operational sustainability. Download: Download high-res image (130KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Zhiwei Li,Teng Liu,Minglong Li,Yun Lin,Peng Guo,Mingfu Lyu,Zhiyong Wei,Lin Sang
Poly (butylene succinate- co -butylene terephthalate)/poly (L-lactic acid) (PBST/PLLA) composite films based on industrially compostable polyester matrices have attracted increasing attention owing to their favorable mechanical properties and packaging potential. In this work, PBST/PLLA was used as the polymer matrix, and an epoxy chain extender was introduced to improve the compatibility between the two phases. Surface-modified coal gangue was further incorporated as a functional filler to regulate the properties of the composite films. The results demonstrated that the dispersibility and interfacial adhesion of modified CG (CGKH 1.0 ) in the matrix were significantly improved. Compared with the composite film material containing unmodified CG (CG-9), the tensile strength and elongation at break of the CGKH 1.0 -9 film increased by 16.2% and 29.5%, respectively. Meanwhile, CG incorporation improved the CO 2 barrier and light-shielding performance, while KH550 modification partially reduced the additional water vapor permeability caused by unmodified CG: the water vapor transmission coefficient ( Pwv ) and carbon dioxide transmission coefficient ( Pco 2 ) of the CGKH 1.0 -9 film were lower than those of the pure PBST/PLLA film, and it also exhibited improved resistance under UV irradiation, hygrothermal aging (85 °C/85% RH), and aqueous hydrolytic environments. This work demonstrates that coal gangue can be transformed into a functional filler for PBST/PLLA composite films, providing a feasible strategy for the high-value utilization of coal gangue in polymer composites. Download: Download high-res image (214KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POWER SOURCES
·
2026
·
IF 8.4
Guichao Zhang,Beibei Li,Hua Ning,Jiaxin Li,Wenkang Liu,Lanlan Li,Xinghua Zhang,Xiaojing Yang,Xiaofei Yu,Zunming Lu
The sluggish oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) kinetics at the air cathode impede the performance of zinc-air batteries (ZABs). Although single-atom catalysts obtained from metal-organic frameworks (MOFs) exhibit impressive catalytic activities, metal species tend to aggregate during the pyrolysis, making it difficult to achieve highly dispersed atomic active sites. To address this issue, a dual-MOF strategy was employed to successfully synthesize Fe single-atom catalyst (Fe/NC-920) from ZIF-8@MIL-101(Fe)#20. During the pyrolysis, Zn volatilization from ZIF-8 generated anchoring sites, while Fe atoms from MIL-101(Fe) were stabilized at these sites, forming stable Fe-N 4 coordination. Due to the rich porous structure and the highly dispersed active sites, Fe/NC-920 exhibited superior OER (an overpotential of 310 mV at 10 mA cm −2 ) and ORR (a half-wave potential of 0.90 V) activities. Besides, the ZAB based on Fe/NC-920 demonstrated superior stability than the ZAB based on Pt/C + RuO 2 . This strategy provides a feasible approach for the development of effective ZAB catalysts.
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2026
·
IF 12.8
Jun Huang,Fan Chen,Zimeng Zhang,Yunxia Zu,Di Cao,Tianyi Huang,Zhiling Li,Aijie Wang
Chlorinated and non-chlorinated aromatic contaminants frequently co-occur in groundwater, but their synergistic bioremediation is often hindered by conflicting redox requirements, microbial niche competition, and the need for external organic carbon sources. Here, we present an electro-stimulated bio-circulation well (ES-BCW) that couples electrode-mediated redox regulation with internal hydraulic recirculation, enabling the simultaneous continuous reductive dechlorination and oxidative aromatic degradation without exogenous organic carbon supplementation. Under continuous operation (120 d), the ES-BCW system achieved average removal rates of 53.2 µmol L −1 d −1 for 1,2,4-trichlorobenzene (1,2,4-TCB) and 169.5 µmol L −1 d −1 for toluene, respectively, demonstrating competitive performance for anaerobic co-treatment of mixed aromatic contaminants. Optimal weak electrical stimulation (1.2 V) with a controlled reflux (50%) promoted spatial niche differentiation between cathodic reductive and anodic oxidative zones. Microbial analysis revealed selective enrichment of dechlorinating ( Dechloromonas and Sphingobium ), toluene-degrading ( Azoarcus and Thauera ), and electroactive ( Geobacter and Sulfurospirillum ) genera. Integrated metagenomic and metabolomic analyses revealed coordinated enrichment of dechlorination ( pcpB, pcpC ) and toluene oxidation ( bssABC, bbsG ) genes, coupled with increased abundances of energy carriers and key electron transfer components (i.e. cytochromes). These shifts collectively supported enhanced electron flux redistribution, metabolic synergy, and sustained acetate cycling, establishing a self-amplifying loop of endogenous carbon reuse that enabled redox partitioning between cathodic reductive and anodic oxidative niches. The ES-BCW system offers an endogenous carbon-driven strategy for synergistic bioremediation of mixed aromatic contaminated oligotrophic groundwater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Wenlong Ma,Hanqi Zhang,Long Zhao,Die Xu,Tongtong Xuan,Xiaojun Wang
Developing high-performance cyan-green phosphors is essential for addressing the long-standing spectral deficiency in full-spectrum white light-emitting diodes (white-LEDs). Here, we report a broadband cyan-green-emitting phosphor, Cs 2 KLuCl 6 :Sb 3+ , synthesized via a facile HCl-assisted solid-state route that supports low-temperature processing and scalable fabrication. Sb 3+ incorporation modulates the electronic structure of Cs 2 KLuCl 6 by narrowing the bandgap from 5.07 to 3.70 eV and inducing pronounced Sb-Cl-Lu orbital hybridization, which stabilizes self-trapped excitons (STEs) and promotes efficient radiative recombination. Under 330 nm excitation, the optimized phosphor exhibits intense broadband cyan-green emission centered at 513 nm with a full width at half maximum of ∼108 nm and a high photoluminescence quantum yield of 82%. The phosphor also demonstrates excellent thermal robustness, retaining 91% of its room-temperature emission intensity at 423 K, with a high thermal activation energy of 0.2874 eV. When integrated with commercial blue- and red-emitting phosphors on a 365 nm LED chip, the resulting white-LED delivers high-quality white light with a color rendering index of 92 and a correlated color temperature of 4671 K, effectively eliminating the cyan spectral gap. These results establish Cs 2 KLuCl 6 :Sb 3+ as a promising cyan-green phosphor for next-generation full-spectrum solid-state lighting.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2026
·
IF 5.1
Yingrun Wang,Yanhui Zheng,Zichuan Ma
Siloxanes are detrimental trace impurities that can severely impair the performance and operational efficiency of biogas combustion systems, making their effective removal essential. Given the relatively high concentration of cyclic siloxanes and their susceptibility to acid-catalyzed ring-opening polymerization, a combined adsorption–polymerization approach on a solid acid adsorbent may offer higher removal efficiency compared to conventional adsorption methods. In this work, we employed activated carbon as a support and fabricated sulfuric acid-supported activated carbon (CSA) via a simple impregnation method. This study represents the first systematic investigation of the synergistic adsorption and acid-catalyzed polymerization of decamethylcyclopentasiloxane (D5) using this material. The activated carbon function as an adsorbent, providing mass transfer channels for D5, whereas the supported sulfuric acid serves as a catalyst to promote its ring-opening polymerization. Dynamic adsorption tests showed that CSA exhibited a high D5 removal capacity, with a theoretical maximum capacity ( Q m, th ) of 3219.7 mg g −1 at 0 °C. A series of characterizations, kinetic interpretation, mass balance analysis and density functional theory (DFT) calculations were also conducted to elucidate the potential adsorption/polymerization mechanisms responsible for D5 removal. The results confirmed that the formation of highe-molecular-weight polysiloxane structures on the CSA surface imparted a high degree of hydrophobicity to the spent CSA material. These findings highlight the potential of CSA as a cost-effective and practical solution for siloxane removal.
✓ 已验证
产品关联
DOI
高影响因子
PHYTOMEDICINE
·
2026
·
IF 11.3
Yeqiu Xu,Junrui Jonathan Hai,Duan Sun,Yihan Yang,Chen Wang,Xinan Zhang,Huanli Xu,Yajin Liao,Xianjun Qu,Bo Han,Weishi Liang,Yong Hai
Background Distractive spinal cord injury (DSCI) is a severe complication of spinal deformity correction surgery, causing early disruption of the blood–spinal cord barrier (BSCB). However, the molecular mechanisms that translate mechanical stress into vascular endothelial dysfunction remain unclear, and effective pharmacological strategies targeting this process are lacking. Purpose This study aimed to investigate the therapeutic effects of sodium rutin (NaR), a water-soluble derivative of rutin, on BSCB disruption following DSCI, and to elucidate the underlying molecular mechanisms. Methods In vivo rat DSCI models and in vitro mechanical distraction models of spinal cord microvascular endothelial cells were employed. The therapeutic effects of oral NaR administration on locomotor function and BSCB permeability in rats following DSCI were systematically evaluated. Mechanistic investigations targeting the SIRT1/β-catenin axis and oxidative stress were conducted utilizing RNA sequencing, interventions with small interfering RNA and SIRT1 inhibitors, alongside standard molecular biology techniques. Results NaR treatment dose-dependently improved locomotor recovery in DSCI rats and significantly reduced BSCB permeability by restoring the expression of tight junction proteins. Mechanical distraction caused a significant downregulation of SIRT1 in endothelial cells. NaR treatment upregulated SIRT1 expression and promoted its nuclear-to-cytoplasmic translocation. This upregulation of SIRT1 was associated with significant inhibition of mitochondrial oxidative stress. Furthermore, oxidative stress was found to promote β-catenin phosphorylation and subsequent degradation via the ubiquitin-proteasome pathway. NaR stabilized β-catenin through SIRT1-mediated antioxidant effects, promoting its nuclear translocation and the downstream expression of tight junction genes. Consequently, by repairing the BSCB, NaR restricted the infiltration of immune cells (CD68 + macrophages/microglia and MPO + neutrophils) into the spinal parenchyma, thereby attenuating secondary neuroinflammation. Conclusion The SIRT1/β-catenin axis may serve as a critical mechanotransduction pathway regulating BSCB integrity. NaR protects the BSCB after DSCI by restoring SIRT1 activity, suppressing oxidative stress, and stabilizing β-catenin signaling. NaR may be a promising pharmacological strategy for the treatment of DSCI. In brief: Hai et al. identify a mechanism by which mechanical distraction disrupts the blood-spinal cord barrier through suppression of SIRT1 and oxidative destabilization of β-catenin. Oral sodium rutin restores barrier integrity, limits inflammation, and thus improves locomotor recovery, highlighting a vascular-targeted therapeutic strategy for distraction-induced spinal cord injury Download: Download high-res image (296KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Zhipeng Liu,Beizhao Chen,Caihong Liu,Youmei Xu,Weiwen Chen,Chaoqun Zhu,Yufei Shu,Shidong Zheng,Fan Wang,Yunjiao Han,Mengxia Wang,Yihan Xue,Zhongying Wang
Chlorinated antibiotics are persistent halogenated pollutants whose detoxification requires deep dechlorination rather than simple parent-compound removal. Here, we report a structurally engineered, earth-abundant copper electrode (Tre-Cu) that enables rapid and deep electrochemical hydrodechlorination of chlorinated antibiotics. Prepared through a facile sequence of oxidation, in situ complex dissolution, and chloride-assisted electroreduction, Tre-Cu undergoes spontaneous surface reconstruction during operation, evolving into a spindle-shaped, sharp-tipped architecture. This electrode achieved nearly complete florfenicol removal within 20 min and full stoichiometric chloride release within 30 min under ambient air, while maintaining stable performance over 10 cycles and 36 h long-term continuous operation, as well as robust tolerance in environmental water matrices. Mechanistic studies show that dechlorination on Tre-Cu is dominated by direct electron transfer rather than atomic hydrogen-mediated reduction. Time-resolved SEM and XPS reveal that transient CuCl-like surface species drive the formation of the activated tip-rich morphology. Finite element simulations, electrochemical analysis, and DFT calculations further demonstrate that the reconstructed surface strengthens the local electric field, enriches interfacial K + , enhances pollutant adsorption, and lowers the barriers for sequential C-Cl bond cleavage. This work offers a simple strategy to couple surface reconstruction with interfacial microenvironment engineering for deep electrochemical detoxification.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2026
·
IF 8.4
Li He,Jiao Peng,Juan Yang,Zheng Xie,Kangjie Zhou,Wang Qiu,Hong Liu,Xianyou Wang
With the rapid development of the photovoltaic and solar cell industry, the growing generation of crystalline silicon sawing/cutting waste has become an urgent problem. However, silicon (Si) is considered a promising alternative to graphite for next-generation high-energy density Li-ion batteries owing to its much higher theoretical capacity. Herein, photovoltaic silicon sawing/cutting waste is recycled as high-performance silicon/carbon anode active material of lithium-ion battery through an integrated strategy combining mechanical activation, acid leaching, dopamine self-assembly coating, and graphite buffering. The as-prepared silicon/carbon composite features a hierarchical architecture, which is composed of nanometer-sized Si particles covered with amorphous carbon and uniformly anchored in a conductive carbon matrix, effectively mitigating the severe volume fluctuation during charge/discharge. Enabled by the enhanced structural stability and interfacial compatibility, the activated silicon/carbon anode delivers a high reversible capacity of 641 mAh g −1 after 350 cycles at 0.5 A g −1 , with a capacity retention of 98.1%. Therefore, the investigation introduces an innovative method for recycling and enhancing the value of photovoltaic silicon sawing/cutting waste for further use, offering a sustainable and economically viable solution.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Feng Shi,Jinze Wang,Long Chen,Sen Jiang,Deqin Zeng,Shuoqing Zhang,Sheng Gao,Lili Zhang,Menghua Li,Liping Wang,Hailin Zhu,Ruhong Li,Yuhai Guo,Yuan Yu
Polyethylene (PE) separators are widely applied in Li-metal batteries (LMBs) for their chemical stability. However, their interactions with electrolyte components remain poorly understood. Here, we propose that the electron-deficient H atoms in C H bonds of PE may interact with anion lone pairs, thereby influencing local anion distribution and solid electrolyte interphase (SEI) formation. To address this, we propose an electron localization strategy by substituting H with F. In C F bond, the strong electron-withdrawing nature of F induces high electron localization, which makes the F atom less prone to gaining or losing electrons. This suppresses electron exchange and minimizes orbital overlap with anions, weakening the separator-anion interaction. Consequently, a C-F-rich polytetrafluoroethylene (PTFE) separator PTFE weakens separator-anion interactions, facilitating anion transport toward the Li interface and favoring anion-derived decomposition, contributing to the formation of an inorganic-rich SEI. As a result, Li||Li symmetric cells employing PTFE exhibit stable Li plating/stripping over 2800 h with low overpotential (< 35 mV) at 0.1 mA cm −2 . Moreover, 4.4 V Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 cells with PTFE retain over 80% of their initial capacity after 470 cycles at 1C, exceeding the 270-cycle lifespan of PE. This work proposes a rational separator design strategy for engineering stable interfaces in safe, long-lasting LMBs. Download: Download high-res image (179KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子